标准号 |
中文名称 |
英文名称 |
EN 524-2-1997 |
预应力钢筋束用钢带材护套 试验方法 第2部分:挠性的测定 |
Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour |
EN 524-3-1997 |
预应力钢筋束用钢带材护套 试验方法 第3部分:反复弯曲试验 |
Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test |
EN 524-4-1997 |
预应力钢筋束用钢带材护套 试验方法 第4部分:抗横向负载力的测定 |
Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance |
EN 524-5-1997 |
预应力钢筋束用钢带材护套 试验方法 第5部分:抗拉伸负载力的测定 |
Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance |
EN 524-6-1997 |
预应力钢筋束用钢带材护套 试验方法 第6部分:密封性的测定(水流失的测定) |
Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss) |
EN 525-1997 |
净热输入值不超过300kW的空间加热用非家用直接燃气强制对流的空气加热器 |
Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
EN 526-1993 |
内陆航行船舶 长度不超过8m的通道 要求、类型 |
Inland navigation vessels; gangways with a length not exceeding 8 m; requirements, types |
EN 527-2-2002 |
办公家具 工作台和办公桌 第2部分:机械安全要求 |
Office furniture - Work tables and desks - Part 2: Mechanical safety requirements |
EN 527-3-2003 |
办公家具 工作台和办公桌 第3部分:结构的稳定性和机械强度测定的试验方法 |
Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure |
EN 528-1996 |
轨道式存储和卸取设备 安全 |
Rail dependent storage and retrieval equipment - Safety |
EN 533-1997 |
防护服 防热和防火 限制火焰蔓延用材料及材料组件 |
Protective clothing - Protection against heat and flame - Limited flame spread materials and material assemblies |
EN 534-1998 |
沥青瓦楞板 |
Corrugated bitumen sheets |
EN 536-1999 |
筑路机械 沥青搅拌设备 安全要求 |
Road construction machines - Asphalt mixing plants - Safety requirements |
EN 538-1994 |
不连续铺设用陶土屋面瓦 弯曲强度试验 |
Clay roofing tiles for discontinuous laying - Flexural strength test |
EN 539-1-1994 |
不连续铺设用陶土屋面瓦 物理特性测定 第1部分:不渗透性试验 |
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test |
EN 539-2-1998 |
不连续铺设用陶土层面瓦 物理特性测定 第2部分:抗霜冻试验 |
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Tests for frost resistance |
EN 54-1-1996 |
火灾探测和火灾警报系统 第1部分:介绍 |
Fire detection and fire alarm systems - Part 1: Introduction |
EN 54-10-2002 |
火灾探测和火灾警报系统 第10部分:火焰探测器 点探测器 |
Fire detection and fire alarm systems - Part 10: Flame detectors; Point detectors |
EN 54-11-2001 |
火灾探测和火灾警报系统 第11部分:人工呼叫点 |
Fire detection and fire alarm systems - Part 11: Manual call points |
EN 54-12-2002 |
火灾探测和火灾警报系统 第12部分:烟雾探测器 使用光束的线探测器 |
Fire detection and fire alarm systems - Part 12: Smoke detectors; Line detectors using an optical light beam |
EN 54-2/prA1-2001 |
火灾探测和火灾警报系统 第2部分:控制和指示设备 修改A1 |
Fire detection and fire alarm systems - Part 2: Control and indicating equipment; Amendment A1 |
EN 54-3-2001 |
火灾探测和火灾警报系统 第3部分:火灾警报设备 发声器 |
Fire detection and fire alarm systems - Part 3: Fire alarm devices; Sounders |
EN 54-5-2000 |
火灾探测和火灾警报系统 第5部分:热探测器 点探测器 |
Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors |
EN 54-7-2000 |
火灾探测和火灾警报系统 第7部分:烟雾探测器 使用散射光、透射光或电离的点探测器 |
Fire detection and fire alarm systems - Part 7: Smoke detectors; Point detectors using scattered light, transmitted light or ionization |
EN 541-1995 |
铝和铝合金 辊压罐头、封闭塞和盖子产品 规范 |
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
EN 542-2003 |
粘结剂 密度测定 |
Adhesives - Determination of density |
EN 543-2003 |
粘结剂 粉未和粒状粘结剂表观密度的测定 |
Adhesives - Determination of apparent density of powder and granule adhesives |
EN 544-1998 |
用矿物和/或合成材料增强的沥青屋顶板 |
Bitumen shingles with mineral and/or synthetic reinforcements |
EN 545-2002 |
给水管道用球墨铸铁管、配件、附件及其接头 要求和试验方法 |
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
EN 546-1-1996 |
铝及铝合金 箔 第1部分:检验和交货的技术条件 |
Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
EN 546-2-1996 |
铝及铝合金 箔 第2部分:机械性能 |
Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
EN 546-3-1996 |
铝及铝合金 箔 第3部分:尺寸公差 |
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
EN 546-4-1997 |
铝及铝合金 箔 第4部分:特殊性能要求 |
Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
EN 547-1-1996 |
机械安全 人体测量 第1部分:确定整个人体进入机械设备通道所需尺寸的原则 |
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
EN 547-2-1996 |
机械安全 人体测量 第2部分:确定进入通道所需尺寸的原则 |
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
EN 547-3-1996 |
机械安全 人体测量 第3部分:人体测量数据 |
Safety of machinery - Human body measurements - Part 3: Anthropometric data |
EN 548-1997 |
弹性地面覆盖物 普通和装饰性油毯规范 |
Resilient floor coverings - Specification for plain and decorative linoleum |
EN 549-1994 |
燃气器具和设备密封件和隔膜用橡胶材料 |
Rubber materials for seals and diaphragms for gas appliances and gas equipmemt |
EN 550-1994 |
医疗器械的消毒 用环氧乙烷消毒的确认和常规控制 |
Sterilization of medical devices - Validation and routine control of ethylene oxide sterilization |
EN 55011/prA3-1998 |
工业、科学、医疗(ISM)射频设备电磁骚扰特性测量方法和限值修改prA3 |
Amendment 3 to CISPR 11 |
EN 55011/prAA-2002 |
工业、科学、医疗(ISM)射频设备电磁骚扰特性测量方法和限值修改prAA |
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 55011/prAB-2002 |
工业、科学、医疗(ISM)射频设备电磁骚扰特性测量方法和限值修改prAB |
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 55011/prAC-2002 |
工业、科学、医疗(ISM)射频设备电磁骚扰特性测量方法和限值修改prAC |
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 55012-2002 |
车辆、艇、内燃机驱动装置无线电骚扰特性用于保护受骚扰对象(除安装在本车辆/艇/装置内或相邻车辆/艇/ |
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/d |
EN 55022/prAE-2001 |
通信端口的说明修改prAE |
Modification of CISPR 22: Clarification of telecommunication ports |
EN 55022/prAF-2001 |
阻抗稳定网络的定义修改prAC |
Modification of CISPR 22: Improved impedance stabilisation networks |
EN 55022/prAG-2001 |
阻抗稳定网络的改进修改prAD |
Modification of CISPR 22: Improved impedance stabilisation networks |
EN 55024/prAD-2001 |
多功能设备的定义多功能设备的适用范围修改prAD |
Modification of CISPR 24: Definition of multifunction equipment - Applicability of multifunction equipment |
EN 55025-2003 |
车辆上、船上和设备上使用的接收机的无线电抗干扰特性限值和测量方法 |
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement (CISPR 25:2002) / Note: Endorsement notice |
EN 55103-1-1996 |
电磁兼容性专用音频、视频、视听和娱乐灯光控制装置用产品类型标准第1部分:电磁辐射 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission |
EN 55103-2-1996 |
电磁兼容性专用音频、视频、视听和娱乐灯光控制装置用产品类型标准第2部分:抗扰性 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
EN 554-1994 |
医疗器械的消毒 湿热消毒的确认和常规控制 |
Sterilization of medical devices - Validation and routine control of sterilization by moist heat |
EN 556-1-2001 |
医疗器械的消毒 标明为“消过毒”的医疗器械的要求 第1部分:定期消毒的医疗器械的要求 |
Sterilization of medical devices - Requirements for medical devices to be designated STERILE - Part 1: Requirements for terminally sterilized medical devices |
EN 558-1-1995 |
工业阀门 法兰管系统使用的金属阀门面面间和中心与面间的尺寸 第1部分:PN标记的阀门 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves |
EN 558-2-1995 |
工业阀门 法兰管系统使用的金属阀门面面间和中心与面间的尺寸 第2部分:级别标记的阀门 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves |
EN 559-2003 |
气焊设备 焊接、切割和同类处理用橡胶软管 |
Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
EN 560-1994 |
气焊设备 焊接、切割和同类处理用设备的软管连接 |
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
EN 561-2002 |
气焊设备 焊接、切割和同类处理用断路阀门快速连接器 |
Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
EN 562-2003 |
气焊设备 焊接、切割和同类处理用压力计 |
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes |
EN 564-1997 |
登山设备 辅助绳索 安全要求和试验方法 |
Mountaineering equipment - Accessory cord - Safety requirements and test methods |
EN 566-1997 |
登山设备 吊索 安全要求和试验方法 |
Mountaineering equipment - Slings - Safety requirements and test methods |
EN 567-1997 |
登山设备 绳夹 安全要求和试验方法 |
Mountaineering equipment - Rope clamps - Safety requirements and test methods |
EN 568-1997 |
登山设备 冰锚 安全要求和试验方法 |
Mountaineering equipment - Ice anchors - Safety requirements and test methods |
EN 569-1997 |
登山设备 岩钉 安全要求和试验方法 |
Mountaineering equipment - Pitons - Safety requirements and test methods |
EN 57-1984 |
石油产品 闪点测定 Abel-Pensky封闭检测仪 |
Petroleum products; Determination of flash point; Abel-Pensky closed tester |
EN 570-1994 |
铝和铝合金 来自于锻制品的冲击挤压铝块 规范 |
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications |
EN 571-1-1997 |
无损检测 渗透检测 第1部分:一般原则 |
Non destructive testing - Penetrant testing - Part 1: General principles |
EN 572-1-1994 |
建筑物用玻璃 基本钠钙硅酸盐玻璃制品 第1部分:定义和一般物理及机械性能 |
Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
EN 572-1-2004 |
建筑用玻璃.基本钠钙玻璃制品.第1部分:定义和一般物理及机械特性 |
|
EN 572-2-1994 |
建筑用玻璃 基本钠钙硅玻璃制品 第2部分:浮法玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
EN 572-2-2004 |
建筑用玻璃.基本钠钙玻璃制品.第2部分:浮法玻璃 |
|
EN 572-3-1994 |
建筑物用玻璃 基本钠钙硅酸盐玻璃制品 第3部分:抛光嵌丝玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass |
EN 572-3-2004 |
建筑用玻璃.基本钠钙玻璃制品.第3部分:抛光络网玻璃 |
|
EN 572-4-1994 |
建筑物用玻璃 基本钠钙硅酸盐玻璃制品 第4部分:拉制薄板玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass |
EN 572-4-2004 |
建筑用玻璃.基本钠钙玻璃制品.第4部分:拉制平板玻璃 |
|
EN 572-5-1994 |
建筑物用玻璃 基本钠钙硅酸盐玻璃制品 第5部分:压花玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass |
EN 572-5-2004 |
建筑用玻璃.基本钠钙玻璃制品.第5部分:压花玻璃 |
|
EN 572-6-1994 |
建筑物用玻璃 基本钠钙硅酸盐玻璃制品 第6部分:嵌丝压花玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass |
EN 572-6-2004 |
建筑用玻璃.基本钠钙玻璃制品.第6部分:嵌丝压花玻璃 |
|
EN 572-7-1994 |
建筑物用玻璃 基本钠钙硅酸盐玻璃制品 第7部分:嵌丝或不嵌丝的沟槽形玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass |
EN 572-7-2004 |
建筑用玻璃.基本钠钙玻璃制品.第7部分:嵌丝和不嵌丝的槽形玻璃 |
|
EN 572-8-2004 |
建筑用玻璃.基本钠钙玻璃产品.第8部分:供货和最终切割尺寸 |
|
EN 572-9-2004 |
建筑用玻璃.基本钠钙玻璃产品.第9部分:合格性评定/产品标准 |
|
EN 573-1-1994 |
铝和铝合金 锻制产品化学成分和外形 第1部分:数字标记系统 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
EN 573-2-1994 |
铝和铝合金 锻制产品化学成分和外形 第2部分:基于标记系统的化学符号 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
EN 573-3-2003 |
铝和铝合金 锻制产品化学成分和外形 第3部分:化学成分 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition |
EN 573-4-1994 |
铝和铝合金 锻制产品化学成分和外形 第4部分:产品外形 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
EN 573-4-2004 |
铝和铝合金.锻制品的化学成分和形状.第4部分:产品形状 |
|
EN 574-1996 |
机械安全 双柄控制设备 功能状况 设计原则 |
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
EN 575-1995 |
铝和铝合金 熔铸生产的母合金 规范 |
Aluminium and aluminium alloys - Master alloys produced by melting - Specifications |
EN 576-1995 |
铝和铝合金 再熔非合金铝锭 规范 |
Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
EN 577-1995 |
铝和铝合金 液体金属 规范 |
Aluminium and aluminium alloys - Liquid metal - Specifications |
EN 578-1993 |
塑料管道系统 塑料管和配件 不透明度的测定 |
Plastics piping systems - Plastics pipes and fittings - Determination of the opacity |
EN 579-1993 |
塑料管道系统 交联聚乙烯(PE-X)管 溶剂萃取法测定交联密度 |
Plastics piping systems - rosslinked polyethylene (PE-X) pipes -Determination of degree of crosslinking by solvent extraction |
EN 58-2004 |
沥青和沥青粘合剂.沥青粘合剂取样 |
|
EN 580-2003 |
塑料管道系统 未增塑聚氯乙烯(PVC-U)管 特定温度下耐二氯甲烷试验方法 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
EN 581-1-1997 |
户外家具 野营、家用和订做的座椅和桌子 第1部分:一般安全要求 |
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements |
EN 581-3-1999 |
户外家具 野营、家用和订做的座椅和桌子 第3部分:桌子的机械安全要求和试验方法 |
Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables |
EN 582-1993 |
热喷涂层 抗拉粘附强度的测定 |
Thermal spraying; determination of tensile adhesive strength |
EN 583-1-1998 |
无损检测 超声波检验 第1部分:一般规则 |
Non-destructive testing - Ultrasonic examination - Part 1: General principles |
EN 583-2-2001 |
无损检测 超声波检验 第2部分:灵敏度和有效范围设定 |
Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting |
EN 583-3-1997 |
无损检测 超声波检验 第3部分:传导技术 |
Non destructive testing - Ultrasonic examination - Part 3: Transmission technique |
EN 583-4-2002 |
无损检测 超声波检验 第4部分:与表面有间隔性垂直波的检验 |
Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface |
EN 583-5-2000 |
无损检测 超声波检验 第5部分:间隔性波的特性和分级 |
Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities |
EN 584-1-1994 |
无损检测 工业用X射线照相胶片 第1部分:工业X射线照相用胶片体系的分类 |
Non destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography |
EN 584-2-1996 |
无损检测 工业用X射线照相胶片 第2部分:参考值法对胶片工艺的控制 |
Non-destructive testing - Industrial radiographic film - Part 2: Control of film processing by means of reference values |
EN 586-1-1997 |
铝和铝合金 锻件 第1部分:检验和交货的技术条件 |
Aluminium and Alluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
EN 586-2-1994 |
铝和铝合金 锻件 第2部分:机械特性和附加特性要求 |
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
EN 586-3-2001 |
铝和铝合金 锻件 第3部分:尺寸和形状公差 |
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
EN 588-1-1996 |
污水管和排水管用纤维水泥管 第1部分:重力系统用管道、管连接件和管配件 |
Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems |
EN 588-2-2001 |
污水管和排水管用纤维水泥管 第2部分:检修孔和检查室 |
Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers |
EN 589-2000 |
汽车燃料 LPG(液化石油气) 要求和试验方法 |
Automotive fuels - LPG - Requirements and test methods |
EN 589-2004 |
机动车用燃料.液化石油气(LPG).要求和试验方法 |
|
EN 59-1977 |
玻璃纤维增强塑料 用 Barcol压痕方法测量硬度 |
Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor |
EN 590-1999 |
汽车燃料 柴油 要求和试验方法 |
Automotive fuels - Diesel - Requirements and test methods |
EN 590-2004 |
机动车用燃料.柴油.要求和试验方法 |
|
EN 591-2001 |
专业人员用试管诊断仪器使用说明书 |
Instructions for use for in vitro diagnostic instruments for professional use |
EN 592-2002 |
自测试用试管诊断仪器使用说明书 |
Instructions for use for in vitro diagnostic instruments for self-testing |
EN 593-1998 |
工业阀门 金属蝶阀 |
Industrial valves - Metallic butterfly valves |
EN 593-2004 |
工业阀门.金属蝶阀 |
|