标准号 |
中文名称 |
英文名称 |
EN ISO 7458-2004 |
玻璃容器.耐内部压力性.试验方法 |
|
EN ISO 7459-2004 |
玻璃容器.耐热冲击性和热冲击耐久性.试验方法 |
|
EN ISO 748-2000 |
明渠水流测量流速面积法 |
Measurement of liquid flow in open channels - Velocity-area methods (ISO 748:1997) |
EN ISO 7488-1995 |
牙科银汞合金搅拌器 |
Dental amalgamators (ISO 7488:1991) |
EN ISO 7490-2000 |
牙科含石膏铸造包埋材料 |
Dental gypsum-bonded casting investments (ISO 7490:2000) |
EN ISO 7491-2000 |
牙科材料色稳定性的测定 |
Dental materials - Determination of colour stability (ISO 7491:2000) |
EN ISO 7492-1998 |
牙科探针 |
Dental explorers (ISO 7492:1997) |
EN ISO 7493-2000 |
牙科医生凳 |
Dental operators stool (ISO 7493:1997, including Technical Corrigendum 1:1999) |
EN ISO 7494-1997 |
牙科综合治疗设备 |
Dental units (ISO 7494:1996) |
EN ISO 7494-2-2003 |
牙科 牙科设备 空气和水供给系统 |
Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003) |
EN ISO 75-1-1996 |
塑料载荷下挠曲温度的测定第1部分:一般试验方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:1993) |
EN ISO 75-1-2004 |
塑料.载荷下挠曲温度的测定.第1部分:一般试验方法 |
|
EN ISO 75-2-1996 |
塑料载荷下挠曲温度的测定第2部分:塑料与硬橡胶 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:1993) |
EN ISO 75-2-2004 |
塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶 |
|
EN ISO 75-3-1996 |
塑料载荷下挠曲温度的测定第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:1993) |
EN ISO 75-3-2004 |
塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
|
EN ISO 7500-1-1999 |
金属材料静态单轴向试验机的验证第1部分:拉伸/压缩试验机 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines (ISO 7500-1:1999) |
EN ISO 7500-1-2004 |
金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 |
|
EN ISO 7500-2-1999 |
金属材料静态单轴向试验机的验证第2部分:拉伸蠕变试验机载荷的验证 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied load (ISO 7500-2:1996) |
EN ISO 7518-1999 |
技术制图建筑工程制图拆除和重建的简化画法 |
Technical drawings - Construction drawings - Simplified representation of demolition and rebuilding (ISO 7518:1983) |
EN ISO 7519-1996 |
技术制图建筑工程制图总体布置图和安装图画法的一般原则 |
Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings (ISO 7519:1991) |
EN ISO 7536-1996 |
石油产品汽油氧化安定性的测定诱导期法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994) |
EN ISO 7539-1-1995 |
金属与合金的腐蚀应力腐蚀试验第1部分:试验程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987) |
EN ISO 7539-2-1995 |
金属与合金的腐蚀应力腐蚀试验第2部分:弯梁试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989) |
EN ISO 7539-3-1995 |
金属与合金的腐蚀应力腐蚀试验第3部分:U型弯曲试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989) |
EN ISO 7539-4-1995 |
金属与合金的腐蚀应力腐蚀试验第4部分:轴向载荷拉伸试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989) |
EN ISO 7539-5-1995 |
金属与合金的腐蚀应力腐蚀试验第5部分:C-环行试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989) |
EN ISO 7539-6-2003 |
金属与合金的腐蚀应力腐蚀试验第6部分:预裂纹试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement (ISO 7539-6:2003) |
EN ISO 7539-7-1995 |
金属与合金的腐蚀应力腐蚀试验第7部分:慢速率应力试验 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989) |
EN ISO 7551-1998 |
牙科吸水捻 |
Dental absorbent points (ISO 7551:1996) |
EN ISO 7579-1996 |
染料有机溶剂中溶解度的测定重量法 |
Dyestuffs - Determination of solubility in organic solvents - Gravimetric method (ISO 7579:1990) |
EN ISO 7590-2001 |
钢丝绳芯输送带总厚度和涂层厚度的测定方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001) |
EN ISO 7622-1-1995 |
钢丝绳芯输送带纵向牵引力试验第1部分:伸长率测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984) |
EN ISO 7622-2-1995 |
钢丝绳芯输送带纵向牵引力试验第2部分:拉伸强度的测量 |
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:1984) |
EN ISO 7623-1997 |
钢丝绳芯输送带绳芯与涂层之间粘合力试验原始试验和热处理 |
Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996) |
EN ISO 7662-1996 |
橡胶和塑料软管衬里耐磨性的测定 |
Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988) |
EN ISO 7711-1-1998 |
牙科旋转器械金刚钻器械第1部分:尺寸、要求、标记和包装 |
Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997) |
EN ISO 7711-2-1995 |
牙科旋转器械金刚钻器械第2部分:切盘 |
Dental rotary instruments - Diamond instruments - Part 2: Discs (ISO 7711-2:1992) |
EN ISO 7711-3-1995 |
牙科旋转器械金刚钻器械第3部分:磨粒尺寸、标注与彩色编码 |
Dental rotary instruments - Diamond instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:1992) |
EN ISO 7711-3-2004 |
牙医学.金刚钻旋转器械.第3部分:磨粒尺寸、名称与符号和色码 |
|
EN ISO 7719-1997 |
有效力矩型全金属六角螺母1型性能等级5、8级和10级 |
Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10 (ISO 7719:1997) |
EN ISO 772-2000 |
水文测验词汇和符号 |
Hydrometric determinations - Vocabulary and symbols (ISO 772:1996) |
EN ISO 7721-2-1994 |
沉头螺钉第2部分:十字槽插入深度 |
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990) |
EN ISO 7726-2001 |
热环境人类工效学测定物理量的方法 |
Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
EN ISO 7730-1995 |
热环境人类工效学对热舒适度的PMV和PPD指标和规格的测定 |
Moderate thermal environments - Determination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994) |
EN ISO 7751-1997 |
橡胶和塑料软管和软管组件试验压力和爆破压力对设计工作压力的比值 |
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991) |
EN ISO 7765-1-2004 |
塑料薄膜和薄板.自由落体法测定抗冲击性.第1部分:梯级法 |
|
EN ISO 7783-1-1999 |
色漆和清漆水蒸气渗透率的测定第1部分:自由膜碟法 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
EN ISO 7783-2-1999 |
色漆和清漆外部砖石工程和混凝土用涂覆材料和涂覆体系第2部分:水蒸气渗透率的测定和分类 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
EN ISO 7785-1-1999 |
牙科手机第1部分:高速气动涡轮手机 |
Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
EN ISO 7785-2-1997 |
牙科手机第2部分:直角和弯角手机 |
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995) |
EN ISO 7786-2001 |
牙科旋转器械技工室用研磨器械 |
Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001) |
EN ISO 7787-2-2000 |
牙科旋转器械切割刀具第2部分:技工室用硬质合金刀具 |
Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000) |
EN ISO 7787-4-2002 |
牙科旋转器械切割刀具第4部分:微型技工室用硬质合金刀具 |
Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002) |
EN ISO 7792-1-2004 |
塑料.热塑性聚酯模塑和挤压材料.第1部分:名称与符号系统和基本规范 |
|
EN ISO 7792-2-2004 |
塑料.热塑性聚酯模塑和挤压材料.第2部分:试验样品的制备和性能测定 |
|
EN ISO 7799-2000 |
金属材料厚度3mm或小于3mm的板材或带材反向弯曲试验 |
Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985) |
EN ISO 780-1999 |
包装货物搬运的图形标志 |
Packaging - Pictorial marking for handling of goods (ISO 780:1997) |
EN ISO 7808-1998 |
塑料热固性模塑材料传递流动性的测定 |
Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992) |
EN ISO 7822-1999 |
玻璃纤维增强塑料孔隙率的测定烧失量、机械粉碎和静态计数法 |
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990) |
EN ISO 7823-1-2003 |
塑料聚甲基丙烯酸甲脂板材类型、尺寸和特性第1部分:浇注薄板材 |
Plastics - Poly(methyl methacrylate) sheets; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
EN ISO 7823-2-2003 |
塑料聚甲基丙烯酸甲脂板材类型、尺寸和特性第2部分:挤塑片 |
Plastics - Poly(methyl methacrylate) sheets; Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
EN ISO 7823-3-2004 |
塑料.聚甲基丙烯酸甲酯薄板.类型、尺寸和特性.第3部分:连续浇铸板 |
|
EN ISO 7837-2000 |
料肥细粒肥料堆密度(松)测定 |
Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992) |
EN ISO 7840-2004 |
小艇.耐火燃油软管 |
|
EN ISO 7854-1997 |
橡胶或塑料涂覆织物耐弯曲损坏性的测定 |
Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995) |
EN ISO 787-10-1995 |
颜料和体质颜料的通用试验方法第10部分:密度测定比重瓶法 |
General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method (ISO 787-10:1993) |
EN ISO 787-11-1995 |
颜料和体质颜料的通用试验方法第11部分:压实容积和压实后表观密度的测定 |
General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping (ISO 787-11:1981) |
EN ISO 787-13-2002 |
颜料和添加剂的通用试验方法第13部分:水溶性硫酸盐、氯化物和硝酸盐的测定 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002) |
EN ISO 787-14-2002 |
颜料和添加剂的通用试验方法第14部分:水萃取物电阻率的测定 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002) |
EN ISO 787-15-1995 |
颜料和体质颜料的通用试验方法第15部分:同类有色颜料耐光性的比较 |
General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:1986) |
EN ISO 787-16-1995 |
颜料和体质颜料的通用试验方法第16部分:相对着色力(或等效着色值)和着色颜料还原后的色度测定目视比较 |
General methods of test for pigments and extenders - Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method (ISO 787-16:1986) |
EN ISO 787-18-1995 |
颜料和体质颜料的通用试验方法第18部分:筛余物测定机械冲洗法 |
General methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical flushing procedure (ISO 787-18:1983) |
EN ISO 787-19-1995 |
颜料的通用试验方法第19部分:水溶性硝酸盐的测定(水杨酸法) |
General methods of test for pigments - Part 19: Determination of water-soluble nitrates (Salicylic acid method) (ISO 787-19:1974) |
EN ISO 787-2-1995 |
颜料和体质颜料的通用试验方法第2部分:在105℃挥发物的测定 |
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 ℃ (ISO 787-2:1981) |
EN ISO 787-23-1995 |
颜料和体质颜料的通用试验方法第23部分:密度测定(用离心机消除夹带的空气) |
General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979) |
EN ISO 787-24-1995 |
颜料和体质颜料的通用试验方法第24部分:着色颜料的相对着色力和白色颜料的相对散射力的测定光度法 |
General methods of test for pigments and extenders - Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods (ISO 787-24:1985) |
EN ISO 787-3-2000 |
颜料和体质颜料的通用试验方法第3部分:水溶性物质的测定 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000) |
EN ISO 787-5-1995 |
颜料和体质颜料的通用试验方法第5部分:吸油值测定 |
General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:1980) |
EN ISO 787-8-2000 |
颜料和体质颜料的通用试验方法第8部分:可溶于水的物质的测定冷萃取法 |
General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water; Cold extraction method (ISO 787-8:2000) |
EN ISO 787-9-1995 |
颜料和体质颜料的通用试验方法第9部分:水悬浮液pH值的测定 |
General methods of test for pigments and extenders - Part 9: Determination of pH value of aqueous suspension (ISO 787-9:1981) |
EN ISO 7885-2000 |
一次性牙科直接注射针头 |
Sterile dental injection needles for single use (ISO 7885:2000) |
EN ISO 7886-1-1997 |
一次性使用无菌皮下注射器 第1部分:手推注射器 |
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:1993, including Technical Corrigendum 1:1995) |
EN ISO 7886-2-1997 |
一次性使用无菌皮下注射器第2部分:带动力驱动注射泵的注射器 |
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996) |
EN ISO 7887-1994 |
水质色度的检验和测定 |
Water quality - Examination and determination of colour (ISO 7887:1994) |
EN ISO 7899-2-2000 |
水质肠球菌的检测和计数第2部分:滤膜过滤法 |
Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method (ISO 7899-2:2000) |
EN ISO 7932-1997 |
微生物学腊状芽孢杆菌计数通用指南30度时菌落计数技术 |
Microbiology - General guidance for the enumeration of Bacillus cereus - Colony-count technique at 30℃ (ISO 7932:1993, including Technical Corrigendum 1:1997) |
EN ISO 7933-2004 |
热环境的人类工效学.通过计算预热应力对热应力的分析测定和说明 |
|
EN ISO 7937-2004 |
食品和动物饲料的微生物学.梭菌属计数的水平方法.菌落计数技术 |
|
EN ISO 7944-1998 |
光学和光学仪器基准波长 |
Optics and optical instruments - Reference wavelengths (ISO 7944:1998) |
EN ISO 7965-2-1996 |
袋跌落试验第2部分:热塑柔性薄膜袋 |
Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993) |
EN ISO 7980-2000 |
水质钙和镁的测定原子吸收光谱法 |
Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method (ISO 7980:1986) |
EN ISO 7998-1996 |
光学和光学仪器 |
Optics and optical instruments - Spectacle frames - Vocabulary and lists of equivalent terms (ISO 7998:1984) |
EN ISO 801-1-1996 |
纸浆成批销售质量的测定第1部分:浆板浆包 |
Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 801-1:1994) |
EN ISO 801-3-1996 |
纸浆成批销售质量的测定第3部分:成套浆包 |
Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994) |
EN ISO 8028-2000 |
真空喷涂漆用橡胶和/或塑料软管和软管组件规范 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) |
EN ISO 8030-1997 |
橡胶和塑料软管易燃烧性试验方法 |
Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) |
EN ISO 8031-1997 |
橡胶和塑料软管和软管组件电阻率测定 |
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993) |
EN ISO 8032-1999 |
橡胶和塑料软管和软管组件液压脉冲弯曲试验(半欧姆型试验) |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) |
EN ISO 8044-1999 |
金属与合金的腐蚀基本术语和定义 |
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999) |
EN ISO 8067-1995 |
软质泡沫聚合材料撕裂强度的测定 |
Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:1989) |
EN ISO 8092-1-1998 |
道路车辆车载电气线束的连接第1部分:单极连接接头尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996) |
EN ISO 8092-2-2001 |
道路车辆车载电气线束的连接第2部分:定义、试验方法和一般性能要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2000) |
EN ISO 8092-3-1999 |
道路车辆车载电气线束的连接第3部分:多极连接接头尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996) |
EN ISO 8092-4-1999 |
道路车辆车载电气线束的连接第4部分:单极和多极连接插头尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997) |
EN ISO 8099-2000 |
小艇厕所污物集存系统 |
Small craft - Toilet waste retention systems (ISO 8099:2000) |
EN ISO 8106-2004 |
玻璃容器.用重量法测定容量.试验方法 |
|
EN ISO 8113-2004 |
玻璃容器.耐垂直负载.试验方法 |
|
EN ISO 8130-14-2004 |
粉末涂料.第14部分:术语 |
|
EN ISO 8130-9-1999 |
粉末涂料第9部分:取样 |
Coating powders - Part 9: Sampling (ISO 8130-9:1992) |
EN ISO 8166-2003 |
电阻焊接 用固定机械设备评定点焊焊条寿命的程序 |
Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machines settings (ISO 8166:2003) |
EN ISO 81714-1-1999 |
产品技术文件用图形符号的设计第1部分:基本规则 |
Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999) |
EN ISO 8178-1-1996 |
往复式内燃机排放测量第1部分:气体和颗粒排放物的试验台测量 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996) |
EN ISO 8178-2-1996 |
往复式内燃机排放测量第2部分:气体和颗粒排放物的现场测量 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996) |
EN ISO 8178-4-1996 |
往复式内燃机排放测量第4部分:不同用途发动机的试验周期 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996) |
EN ISO 8178-5-1997 |
往复式内燃机排放测量第5部分:试验用燃料 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997) |
EN ISO 8178-6-2000 |
往复式内燃机排放测量第6部分:测量结果和试验报告 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000) |
EN ISO 8185-1997 |
医用加湿器湿化系统的一般要求 |
Humidifiers for medical use - General requirements for humidification systems (ISO 8185:1997) |
EN ISO 8192-1995 |
水质活性污泥对氧消耗量的抑制性试验 |
Water quality - Test for the inhibition of oxygen consumption by activated sludge (ISO 8192:1986) |
EN ISO 8205-1-2002 |
电阻焊接水冷次级线圈连接电缆第1部分:双导体连接电缆的尺寸和要求 |
Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002) |