标准号 |
中文名称 |
英文名称 |
| BS EN 1783-1997 |
火柴.性能要求、安全和分类 |
(Matches - Performance requirements, safety and classification) |
| BS EN 1784-2003 |
食品.经过照射处理含脂肪的食品的检测.碳氢化合物的气相色谱分析 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic analysis of hydrocarbons) |
| BS EN 1785-2003 |
食品.经过照射处理含脂肪食品的检测.2烷基环丁酮的气相色谱/质谱分析 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones) |
| BS EN 1786-1997 |
食品.电子自旋共振光谱仪对含骨食品的辐射检验 |
(Foodstuffs - Detection of irradiated food containing bone - Method by ESR spectroscopy) |
| BS EN 1787-2000 |
食物.ESR光谱法检测含纤维素经过辐射的食品 |
(Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy) |
| BS EN 1788-2001 |
食品.可与硅酸盐矿物隔绝的辐照食品的热致发光检测 |
(Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated) |
| BS EN 1789-2000 |
医用车辆和其设备.道路救护车 |
(Medical vehicles and their equipment - Road ambulances) |
| BS EN 179-1998 |
建筑硬件.由水平把手或推板控制的紧急出口装置.要求和试验方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods) |
| BS EN 1790-1998 |
道路标记材料.预制道路标记 |
(Road marking materials - Preformed road markings) |
| BS EN 1791-1997 |
表面活性剂.脂肪烷基乙烷胺氧化物.胺氧化物含量测定 |
(Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content) |
| BS EN 1792-2003 |
焊接.焊接和相关工艺术语的多语种对照表 |
(Welding - Multilingual list of terms for welding and related processes) |
| BS EN 1793-1-1998 |
道路交通阻塞噪音减低装置.测定声学性能的试验方法.声音吸收的内在特性 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Intrinsic characteristics of sound absorption) |
| BS EN 1793-2-1998 |
道路交通的噪音减低系统.声学性能测定的试验方法.空载声隔绝的固有特性 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Intrinsic characteristics of airborne sound insulation) |
| BS EN 1793-3-1998 |
道路交通的噪音减低系统.声学性能测定的试验方法.标准化交通噪音频谱 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Normalized traffic noise spectrum) |
| BS EN 1794-1-2003 |
道路交通噪声降低设备.非声学性能.机械性能和稳定性要求 |
(Road traffic noise reducing devices - Non-acoustic performance - Mechanical performance and stability requirements) |
| BS EN 1795-1998 |
可移动煤气罐(不含LPG).煤气服务政策的改变步骤 |
(Transportable gas cylinders (excluding LPG) - Procedures for change of gas service) |
| BS EN 1797-1-1998 |
低温容器.气体/材料可混用性.氧可混用性 |
(Cryogenic vessels - Gas/material compatibility - Oxygen compatibility) |
| BS EN 1797-2001 |
低温容器.气体/材料可混用性 |
(Cryogenic vessels - Gas/material compatibility) |
| BS EN 1799-1999 |
混凝土结构的防护和修理的产品和系统.试验方法.应用于混凝土表面的结构胶粘剂的适应性的测量方法 |
(Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface) |
| BS EN 1800-1999 |
可移动气瓶.乙炔瓶.基本要求和定义 |
(Transportable gas cylinders - Acetylene cylinders - Basic requirements and definitions) |
| BS EN 1801-1999 |
可移动钢瓶.单乙炔瓶的填充条件 |
(Transportable gas cylinders - Filling conditions for single acetylene cylinders) |
| BS EN 180101-1995 |
电子器件质量评定协调体系规范.固定光纤衰减器空白详细规范 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed fibre optic attenuators) |
| BS EN 1802-2002 |
可运输储气瓶.无缝铝合金储气瓶的周期性检验和测试 |
(Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders) |
| BS EN 1803-2002 |
可运输储气瓶.焊接炭素钢储气瓶的周期性检验和测试 |
(Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders) |
| BS EN 1804-1-2002 |
地矿机械.液压矿顶支撑物的安全要求.支撑装置及一般要求 |
(Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements) |
| BS EN 1806-2000 |
烟囱.单壁粘土/陶瓷烟道砖块.要求和试验方法 |
(Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods) |
| BS EN 1807-1999 |
木工机械的安全.带锯机械 |
(Safety of woodworking machines - Band sawing machines) |
| BS EN 1808-1999 |
悬吊设备的安全性要求.设计计算、稳定性标准和结构.试验 |
(Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests) |
| BS EN 1809-1998 |
潜水附件.浮力补偿器.功能和安全要求.试验方法 |
(Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods) |
| BS EN 1810-1998 |
体穿孔后用组件.火焰原子吸收分光光度法测定镍含量的参考试验方法 |
(Body-piercing post assemblies - Reference test method for determination of nickel content by flame atomic absorption spectrometry) |
| BS EN 181000-1995 |
电子件用质量评定协调系统.总规范.纤维光学分流装置 |
(Harmonized system of quality assessment for electronic components - Generic specification - Fibre optic branching devices) |
| BS EN 1811-1999 |
由直接和延长与皮肤接触的产品中镍释放的参考试验方法 |
(Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin) |
| BS EN 181101-1995 |
电子器件质量评定协调体系.光纤分路器件的空白详细规范.型号:非波长选择的星形、发射分光离器/连光器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: non wavelength selective transmissive star) |
| BS EN 181102-1995 |
光纤分路器件的空白详细规范.型号:非波长选择的星形、多路调制/解调制器 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: wavelength selective transmission star) |
| BS EN 181103-1998 |
电子件质量评估的协调系统.空白详细规范.光纤分支装置.型号:电信应用的非波长选择传输星型三相绕阻 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: non wavelength selective transmissive star for telecommunication a) |
| BS EN 181104-1998 |
电子件质量评估的协调系统.空白详细规范.光纤分支装置.型号:电信应用的波长选择传输星型三相绕阻 |
(Harmonized system of quality assessment for electronic components - Blank detail specification: fibre optic branching devices - Type: wavelength selective transmissive star for telecommunication appli) |
| BS EN 1813-1998 |
铺地织物.用耐蘑机械对羊毛织物完整性的测定 |
(Textile floor coverings - Determination of wool fibre integrity using an abrasion machine) |
| BS EN 1814-1998 |
织物地板铺面.用改良威特曼鼓试验测定抗在剪切边角上的损害力 |
(Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test) |
| BS EN 1814-2005 |
铺地织物.用改良威特曼鼓试验测定在剪边处的抗损坏性 |
|
| BS EN 1815-1998 |
弹性和织物地板铺面.静电性能评估 |
(Resilient and textile floor coverings - Assessment of static electrical propensity) |
| BS EN 1816-1998 |
弹性地板覆盖物.带有泡沫背面的相同和不同种光滑橡胶地板覆盖物规范 |
(Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing) |
| BS EN 1817-1998 |
弹性地板覆盖物.相同和不同种光滑橡胶地板覆盖物规范 |
(Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings) |
| BS EN 1818-1999 |
弹性地板覆盖物.承载重小脚轮效果的测定 |
(Resilient floor coverings - Determination of the effect of loaded heavy duty castors) |
| BS EN 1820-1997 |
麻醉储藏袋 |
(Anaesthetic reservoir bags) |
| BS EN 1821-1-1997 |
电动道路车辆.道路运行能力的测量.纯电动车辆 |
(Electrically propelled road vehicles - Measurement of road operating ability - Pure electric vehicles) |
| BS EN 1821-2-1999 |
电动道路车辆.道路运行能力的测量.热电动复合动力车 |
(Electrically propelled road vehicles - Measurement of road operating ability - Thermal electric hybrid vehicles) |
| BS EN 1822-1-1998 |
高效空气过滤器(HEPA和ULPA).分类、性能试验和标记 |
(High efficiency air filters (HEPA and ULPA) - Classification, performance testing, marking) |
| BS EN 1822-2-1998 |
高效空气过滤器(HEPA和ULPA).气溶胶产品、测量设备、粒子计数统计 |
(High efficiency air filters (HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics) |
| BS EN 1822-3-1998 |
高效空气过滤器(HEPA和ULPA).试验扁平片状过滤媒介 |
(High efficiency air filters (HEPA and ULPA) - Testing flat sheet filter media) |
| BS EN 1822-4-2000 |
高效空气过滤器(HEPA和ULPA).过滤器件泄漏性的测定 |
(High efficiency air filters (HEPA and ULPA) - Determining leakage of filter element (scan method)) |
| BS EN 1822-5-2000 |
高效空气过滤器(HEPA和ULPA).过滤器件的效率测定 |
(High efficiency air filters (HEPA and ULPA) - Determining the efficiency of filter element) |
| BS EN 1824-1998 |
道路标记材料.道路试验 |
(Road marking materials - Road trials) |
| BS EN 1825-2-2002 |
油脂分离器.标准尺寸的选择、安装、操作和维护 |
(Grease separators - Selection of nominal size, installation, operation and maintenance) |
| BS EN 1826-1997 |
生物工艺学.大比例方法和生产.原材料监督控制方法 |
(Biotechnology - Large-scale process and production - Control procedures for raw materials) |
| BS EN 1827-1999 |
呼吸保护装置.防气体或气体和微粒或只防微粒的无吸气阀和带分离式过滤器的半面罩.要求、试验和标记 |
(Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking) |
| BS EN 1828-2002 |
健康信息.外科程序用分类和编码系统的目录结构 |
(Health informatics - Categorial structure for classifications and coding systems of surgical procedures) |
| BS EN 1834-1-2000 |
往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.用在可燃气体和蒸气环境的II组发动机 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable gas and vapo) |
| BS EN 1834-2-2000 |
往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.用在地下工作时对沼气和/或可燃性尘 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group I engines for use in underground workings su) |
| BS EN 1834-3-2000 |
往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.用在可燃灰尘环境下的II组发动机 |
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable dust atmosph) |
| BS EN 1835-2000 |
呼吸保护装置.连接头盔和头罩的轻型结构压缩空气的线状呼吸装置.要求,试验,标记 |
(Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking) |
| BS EN 1836-1997 |
个人眼睛防护.常规使用的太阳镜和滤光镜 |
(Personal eye protection - Sunglasses and sunglare filters for general use) |
| BS EN 1837-1999 |
机械的安全.机械的整体照明 |
(Safety of machinery - Integral lighting of machines) |
| BS EN 1838-1999 |
照明设备.应急灯 |
(Lighting applications - Emergency lighting) |
| BS EN 1839-2004 |
气体和蒸气爆炸极限的测定 |
|
| BS EN 1841-1999 |
胶粘剂.地板覆盖物和墙壁覆盖物用胶粘剂的试验方法.与胶粘剂粘接的油毡地板覆盖物尺寸变化的测定 |
(Adhesives - Test methods for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive) |
| BS EN 1842-1997 |
塑料.热固性聚合物(SMC-BMC).压制模缩测定 |
(Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage) |
| BS EN 1844-2001 |
防水软板.耐臭氧性测定.屋顶防水用塑料和橡胶薄板 |
(Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1845-1999 |
制靴机械.靴模机.安全要求 |
(Footwear manufacturing machines - Footwear moulding machines - Safety requirements) |
| BS EN 1846-1-1998 |
消防车和救援车.命名和名称与符号 |
(Firefighting and rescue service vehicles - Nomenclature and designation) |
| BS EN 1846-2-2002 |
消防车和救援车.安全和性能的一般要求 |
(Firefighting and rescue service vehicles - Common requirements - Safety and performance) |
| BS EN 1846-3-2004 |
消防车和救援车.固定安装设备.安全和性能 |
|
| BS EN 1847-2001 |
防水柔性层.防水塑料和橡胶片.暴露于液体化学药品包括水的方法 |
(Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals including water) |
| BS EN 1848-1-2000 |
防水柔性板.长度,宽度和垂直度的测定.屋顶防水用沥青板 |
(Flexible sheets for waterproofing - Determination of length, width and straightness - Bitumen sheets for roof waterproofing) |
| BS EN 1848-2-2001 |
防水软板.长度、宽度和平直度的测定.屋顶防水用塑料和橡胶薄板 |
(Flexible sheets for waterproofing - Determination of length, width and straightness - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1849-1-2000 |
防水柔性板.厚度和单位面积质量的测定.屋顶防水用沥青板 |
(Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Bitumen sheets for roof waterproofing) |
| BS EN 1849-2-2001 |
防水软板.厚度和单位面积质量的测定.屋顶防水用塑料和橡胶薄板 |
(Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1850-1-2000 |
防水柔性板.可视缺陷的测定.屋顶防水用沥青板 |
(Flexible sheets for waterproofing - Determination of visible defects - Bitumen sheets for roof waterproofing) |
| BS EN 1850-2-2001 |
防水软板.可视缺陷的测定.屋顶防水用塑料和橡胶薄板 |
(Flexible sheets for waterproofing - Determination of visible defects - Plastic and rubber sheets for roof waterproofing) |
| BS EN 1852-1-1998 |
无压地下排水管和下水道用塑料管道系统.聚丙烯(PP).管道,管配件及系统用规范 |
(Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Specifications for pipes, fittings and the system) |
| BS EN 1853-1999 |
农业机械.带倾卸车身的挂车.安全 |
(Agricultural machinery - Trailers with tipping body - Safety) |
| BS EN 1854-1997 |
气燃器和气燃器具的压力感受装置 |
Pressure sensing devices for gas burners and gas burning appliances |
| BS EN 1856-1-2003 |
烟囱.金属烟囱的要求.系统烟囱产品 |
(Chimneys - Requirements for metal chimneys - System chimney products) |
| BS EN 1857-2003 |
烟囱.组件.混凝土烟道衬块 |
(Chimneys - Components - Concrete flue liners) |
| BS EN 1858-2003 |
烟囱.组件.混凝土烟道砖 |
(Chimneys - Components - Concrete flue blocks) |
| BS EN 1859-2000 |
烟囱.金属烟囱.试验方法 |
(Chimneys - Metal chimneys - Test methods) |
| BS EN 1860-1-2003 |
烧烤用器具、固体燃料和点火器.烧烤用固体燃料.要求和试验方法 |
(Appliances, solid fuels and firelighters for barbecueing - Barbecues burning solid fuels - Requirements and test methods) |
| BS EN 1860-2-2005 |
烧烤用器具、固体燃料和点火器.烧烤木炭和烧烤木炭成型煤.要求和试验方法 |
|
| BS EN 1860-3-2003 |
烧烤用器具、固体燃料和点火器.烧烤用固体燃料点燃用点火器.要求和试验方法 |
(Appliances, solid fuels and firelighters for barbecueing - Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods) |
| BS EN 186000-1-1994 |
电子器件的质量评定协调系统.光纤和光缆的连接设备.总规范.要求,试验方法和合格批准程序 |
(Harmonized system of quality assessment for electronic components - Generic specification - Connector sets for optical fibres and cables - Requirements, test methods and qualification approval procedu) |
| BS EN 186001-1994 |
电子气件质量评定协调体系.空白详细规范.光纤和光缆连接器空白详细规范.Ⅰ类环境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connectors for optical fibres and cables - Environmental category I) |
| BS EN 186002-1994 |
电子电气器件质量评定体系.光纤和光缆连接器空白详细规范.II类环境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category II) |
| BS EN 186003-1994 |
电子电气器件质量评定体系.光纤和光缆连接器空白详细规范.III类环境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category III) |
| BS EN 186004-1994 |
电子电气器件质量评定体系.光纤和光缆连接器空白详细规范.IV类环境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category IV) |
| BS EN 186005-1994 |
电子电气器件质量评定体系.光纤和光缆连接器空白详细规范.V类环境 |
(Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Connector for optical fibres and cables - Environmental category V) |
| BS EN 186006-1-1996 |
电子件的质量评定协调体系.空白详细规范.军用光纤和光缆连接器.环境等级VI |
(Harmonized system of quality assessment for electronic components - Blank detail specification - Connectors for optical fibres and cables for military use - Environmental category VI) |
| BS EN 1861-1998 |
制冷系统和热泵.系统流量图,管道和设备图.布局和符号 |
(Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols) |
| BS EN 186100-1995 |
电子器件质量评定体系.光纤光缆连接器件分规范.F-SMA型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Types F-SMA) |
| BS EN 186110-1995 |
电子器件质量评定体系.光纤光缆连接器件分规范.FC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type FC) |
| BS EN 186130-1996 |
电子件的质量评定体系.LSA型光纤和光缆连接器装置分规范 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Connector sets for optical fibres and cables - Type LSA) |
| BS EN 186150-1997 |
OCCA-BU型光学纤维织物和电缆用连接器成套设备 |
(Connector sets for optical fibres and cables - Type OCCA-BU) |
| BS EN 186160-1997 |
OCCA-PC型光学纤维织物和电缆用连接器成套设备 |
(Connector sets for optical fibres and cables - Type OCCA-PC) |
| BS EN 186170-1998 |
电子电气器件质量评定体系.分规范.光纤和电缆连接装置.RCC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC) |
| BS EN 186180-1996 |
电子件的质量评定体系.LSB型光纤和光缆连接器装置分规范 |
(Harmonized system of quality assessment for electronic components - Sectional specification - Connector sets for optical fibres and cables - Type LSB) |
| BS EN 1862-1998 |
塑料管道系统.玻璃增强热固塑料管(GRP).暴露于化学环境的随后相关蠕变因子的测定 |
(Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment) |
| BS EN 186210-1996 |
电子件质量评定协调体系.分规范:光纤和光缆用连接装置.CF08型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type CF08) |
| BS EN 186220-1996 |
电子件的质量评定体系.LSC型光纤和光缆连接器装置分规范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: Connector sets for optical fibres and cables - Type LSC) |
| BS EN 186230-1996 |
电子件的质量评定体系.LSF型光纤和光缆连接器装置分规范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSF) |
| BS EN 186240-1996 |
光纤和光缆用MT型连接器组分规范 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MT) |
| BS EN 186260-1998 |
电子器件质量评定协调体系.分规范:光纤和电缆连接件.SC型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC) |
| BS EN 186270-1998 |
电子器件质量评定协调体系.分规范:光纤和电缆连接件.LSH型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH) |
| BS EN 186290-1998 |
电子器件质量评定协调体系.光纤和电缆连接件.MPO型 |
(Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO) |
| BS EN 1863-1-2000 |
建筑物用玻璃.热增强钠钙玻璃.定义和说明 |
(Glass in buildings - Heat strengthened soda lime silicate glass - Definition and description) |
| BS EN 1863-2-2004 |
建筑玻璃.热增强钠钙玻璃.合格评价.产品标准 |
|
| BS EN 1863-2-2004 |
建筑玻璃.热增强钠钙玻璃.合格评价.产品标准 |
|
| BS EN 186300-1999 |
电子件的质量评定协调系统.分规范:光纤和电缆型MSC连接装置 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC) |
| BS EN 186310-1999 |
电子件的质量评定协调体系.分规范:光纤和电缆的连接装置.MF型 |
(Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF) |
| BS EN 1864-1997 |
内河运输船舶.轮机房和控制位置.型号和安全要求 |
(Inland navigation vessels - Wheelhouse and control position - Types, safety requirements) |
| BS EN 1865-2000 |
用于道路救护车的担架和其它病人处理设备的规范 |
(Specifications for stretchers and other patient handling equipment used in road ambulances) |
| BS EN 1867-1997 |
机读卡.保健应用.发卡人身分识别的计数系统和注册过程 |
(Machine readable cards - Health care applications - Numbering system and registration procedure for issuer identifiers) |
| BS EN 1868-1997 |
防坠落人员保护设备.相同含义名称表 |
(Personal protective equipment against falls from a height - List of equivalent terms) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com