标准号 |
中文名称 |
英文名称 |
DIN EN 207-2002 |
人眼防护.防激光辐射过滤器和眼镜保护装置(激光防护镜) |
(Personal eye-protection - Filters and eye-protection against laser radiation (laser eye-protectors) (includes amendment A1:2002); German version EN 207:1998 + A1:2002) |
DIN EN 2070-1-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; german version EN 2070-1:1989) |
DIN EN 2070-1/A1-1993 |
航空和航天.铝和可锻铝合金制品.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; German version EN 2070-1/A1:1993; amendment 1) |
DIN EN 2070-2-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第2部分:薄板.带材.型材和板材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 2: sheet, strip formed profiles and plate; german version EN 2070-2:1989) |
DIN EN 2070-3-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第3部分:棒材和压制型材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 3: bar and section; german version EN 2070-3:1989) |
DIN EN 2070-4-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第4部分:结构管材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 4: tube for structures; german version EN 2070-4:1989) |
DIN EN 2070-5-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第5部分:内压管 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 5: tube used under pressure; german version EN 2070-5:1989) |
DIN EN 2070-6-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第6部分:铆钉用丝材 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 6: rivet wire; german version EN 2070-6:1989) |
DIN EN 2070-7-1990 |
航空和航天.铝及锻铝合金半成品.交货技术条件.第7部分:初锻制坯料 |
(Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 7: wrought forging stock; german version EN 2070-7:1989) |
DIN EN 2071-2003 |
航空航天系列.厚度0.25mma6mm的铝及铝合金薄板.尺寸 |
(Aerospace series - Sheets in aluminium and aluminium alloys, thickness 0,25 mma6 mm - Dimensions; German and English version EN 2071:2001) |
DIN EN 2076-1-1990 |
航空和航天.铝.镁合金铸件和铸锭.交货技术要求.第1部分:一般要求 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; german version EN 2076-1:1989) |
DIN EN 2076-1/A1-1993 |
航空和航天.铝合金和镁合金锭块和铸件.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; German version EN 2076-1/A1:1993; amendment 1) |
DIN EN 2076-2-1990 |
航空和航天.铝.镁合金铸件和铸锭.交货技术条件.第2部分:再熔炼用铸锭 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 2: ingots for remelting; german version EN 2076-2:1989) |
DIN EN 2076-3-1990 |
航空和航天.铝.镁合金铸件和铸锭.交货技术条件.第3部分:试制铸件和连铸件 |
(Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 3: pre-production and production castings; german version EN 2076-3:1989) |
DIN EN 2078-2003 |
航空航天系列.金属材料.生产图表、检验图表、检验和试验报告;定义、一般原理、制备和批准 |
(Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval; German and English version EN 2078:2001) |
DIN EN 2079-1995 |
航空和航天.用于仪器仪表带耐蚀钢法兰的精密球轴承.尺寸和负载 |
(Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 2079:1995) |
DIN EN 208-2002 |
人眼防护.在激光器和激光系统上作校准工作用的眼镜防护装置(激光校准镜) |
(Personal eye-protection - Eye-protectors for adjustment work on lasers and lasersystems (laser adjustment eye-protectors) (includes amendment A1:2002); German version EN 208:1998 + A1:2002) |
DIN EN 20811-1992 |
纺织品.耐水渗透性的测定.静水压试验 |
(Textiles fabrics; determination of resistance to water penetration; hydrostatic pressure test (ISO 811:1981); german version EN 20811:1992) |
DIN EN 2082-1-1990 |
航空和航天.铝合金锻造预制材料和锻造件.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; german version EN 2082-1:1989) |
DIN EN 2082-1/A1-1993 |
航空和航天.铝合金锻坯和锻件.交货技术条件.第1部分:一般要求 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; German version EN 2082-1/A1:1993; amendment 1) |
DIN EN 2082-2-1990 |
航空和航天.铝合金锻造预制材料和锻造件.交货技术条件.第2部分:锻造预制材料 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 2: forging stock; german version EN 2082-2:1989) |
DIN EN 2082-3-1990 |
航空和航天.铝合金锻造预制材料和锻造件.交货技术条件.第3部分:试制件和连续锻造件 |
(Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 3: preproduction and production forgings; german version EN 2082-3:1989) |
DIN EN 2083-2001 |
航空航天系列.电缆用铜或铜合金导体.产品标准.德文版EN2083-2001 |
(Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard; German version EN 2083:2001) |
DIN EN 20865-1992 |
凸焊机面上的T型槽(ISO865-81) |
(Slots in platens for projection welding machines (ISO 865:1981); german version EN 20865:1991) |
DIN EN 2089-1994 |
航空和航天.AL-P2014A-T6和T62铝合金.薄板和带材.0.4mm |
(Aerospace series; aluminium alloy AL-P2014A-T6 or T62; sheet and strip; 0,4 mma6 mm; German version EN 2089-1994) |
DIN EN 20898-2-1994 |
紧固件的机械性能.第2部分:有规定的检验载荷值的螺母.粗牙螺纹 |
(Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993) |
DIN EN 20898-7-1995 |
紧固件的机械性能.第7部分:公称直径1mm至10mm的螺栓和螺钉的扭力试验和最小扭矩 |
(Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995) |
DIN EN 209-2000 |
钢筒.最小容量为209L的带活动盖的筒.德语版EN209:1999 |
(Steel drums - Removable head (open head) drums with a minimum capacity of 210 l; German version EN 209:1999) |
DIN EN 2093-1993 |
航空和航天.AL-P709-T74铝合金.20mm≤a≤150mm.自由锻件. |
(Aerospace series; aluminium alloy AL-P7009-T74; hand forgings 20 mma150 mm; German version EN 2093:1992) |
DIN EN 2094-1993 |
航空和航天.AL-P7009-T74铝合金.3mm≤a≤150mm模锻件 |
(Aerospace series; aluminium alloy AL-P7009-T74; die forgings 3 mma150 mm; German version EN 2094:1992) |
DIN EN 21-1990 |
木材防腐剂.通过幼虫转化对家具窃蠹毒值的测定(实验室法) |
(Wood preservatives; determination of toxic values against Anobium punctatum (De Geer) by larval transfer (laboratory method); german version EN 21:1988) |
DIN EN 210-2000 |
钢筒.最小总容量为216.5L的带有密封盖的筒.德语版EN210:1999 |
(Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l; German version EN 210:1999) |
DIN EN 2100-1992 |
航空和航天.AL-P2014A-T4511铝合金.挤压棒材和型材a或D≤200mm |
(Aerospace series; aluminium alloy AL-P2014A-T4511; extruded bars and sections a or D200 mm; german version EN 2100:1992) |
DIN EN 2101-1991 |
航空和航天.铝和锻铝合金的铬酸阳极氧化 |
(Aerospace series; chromic acid anodizing of aluminium and wrought aluminium alloys; german version EN 2101:1991) |
DIN EN 2103-1-1991 |
航空和航天.钢.镍基合金以及钴基合金预制材料和铸件.交货技术条件.第1部分:一般要求 |
(Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 1: general requirements; german version EN 2103-1:1991) |
DIN EN 2103-2-1991 |
航空和航天.钢.镍基合金以及钴基合金预制材料和铸件.交货技术条件.第2部分:预制材料 |
(Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 2: remelting stock; german version EN 2103-2:1991) |
DIN EN 2103-3-1991 |
航空和航天.钢.镍基合金以及钴基合金预制材料和铸件.交货技术条件.第3部分:试制铸件和批生产铸件 |
(Aerospace series; steel, nickel base and cobalt base alloy remelting stock and castings; technical specification; part 3: pre-production and production castings; german version EN 2103-3:1991) |
DIN EN 2104-1996 |
航空和航天.丙烯腈-丁二烯-橡胶(NBR).硬度:40IRHD |
(Aerospace series - Acrylonitrile-butadiene elastomer (NBR) - Hardness 40 IRHD; German version EN 2104:1996) |
DIN EN 212-2003 |
木材防腐剂.木材防腐剂和经过防腐处理的木材分析用取样和制备的一般指南 |
(Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber; German version EN 212:2003) |
DIN EN 2122-1996 |
航空和航天.阳极处理和铬酸钝化的铝合金平垫圈 |
(Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated; German version EN 2122:1996) |
DIN EN 2126-1993 |
航空和航天.AL-P7075-T651铝合金.6mm∠a≤800mm板材 |
(Aerospace series; aluminium alloy AL-P7075-T651; plate 6 mma80 mm; German version EN 2126:1992) |
DIN EN 2127-1993 |
航空和航天.AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材 |
(Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections a or D100 mm; German version EN 2127:1992) |
DIN EN 2128-1993 |
航空和航天.AL-P7075-T73511铝合金.6mm≤a或D≤75mm拉制棒材 |
(Aerospace series; aluminium alloy AL-P7075-T73511; drawn bars 6 mma or D75 mm; German version EN 2128:1992) |
DIN EN 2130-2002 |
航空航天系列.仪器和设备用耐腐蚀钢的轴承、精密滚珠轴承.技术规范 |
(Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification; German version EN 2130:2001) |
DIN EN 2131-2003 |
航空航天系列.厚度6mma160mm的铝合金板.尺寸 |
(Aerospace series - Plates in aluminium alloys, thickness 6 mma160 mm - Dimensions; German and English version EN 2131:2001) |
DIN EN 2133-1998 |
航空和航天.抗拉强度≤1450MPa的钢,铜,铜合金以及镍合金的镀镉 |
(Aerospace series - Cadmium plating of steels with specified tensile strength1450 MPa, copper, copper alloys and nickel alloys; German version EN 2133:1997) |
DIN EN 2134-2003 |
航空航天系列.直径10mmD220mm的铝及铝合金挤压圆棒.尺寸 |
(Aerospace series - Round bars, extruded in aluminium and aluminium alloys, diameter 10 mmD220 mm - Dimensions; German and English version EN 2134:2001) |
DIN EN 2138-2000 |
航空和航天系列.扁形镀镉钢垫圈 |
(Aerospace series - Washers, flat, in steel, cadmium plated; German version EN 2138:1999) |
DIN EN 2139-1989 |
航空和航天.耐高温钢垫圈 |
(Aerospace; washers, flat, heat resisting steel; german version EN 2139:1989) |
DIN EN 2143-1993 |
航空和航天.英寸系列1050A铝制一般头实心铆钉 |
(Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series; german version EN 2143:1992) |
DIN EN 2144-1994 |
航空和航天.英制系列铝合金2117通用头全铆钉 |
(Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series; German version EN 2144:1994) |
DIN EN 2145-1994 |
航空和航天.英制系列阳极氧化或铬酸钝化铝合金制2117通用头全铆钉 |
(Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series; German version EN 2145:1994) |
DIN EN 2146-1993 |
航空和航天.英寸系列2017A铝合金一般头实心铆钉 |
(Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992) |
DIN EN 2148-1993 |
航空和航天.英寸系列5056A铝合金一般头实心铆钉 |
(Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992) |
DIN EN 2149-1996 |
航空和航天.英寸系列5056A铝合金阳极氧化或铬酸钝化通用头实心铆钉 |
(Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodised or chromated, inch based series; German version EN 2149:1996) |
DIN EN 215-1-1988 |
恒温散热气阀.要求和检验 |
(Thermostatic radiator valves; requirements and testing) |
DIN EN 215-2004 |
恒温散热器阀.要求和试验方法 |
|
DIN EN 21539-1993 |
信息技术.FORTRAN编程语言 |
(Information technology; programming languages; Fortran (ISO/IEC 1539:1991); english version EN 21539:1992) |
DIN EN 2155-12-1997 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第12部分:线性热膨胀的测定 |
(Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion; German version EN 2155-12:1997) |
DIN EN 2155-13-1993 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第13部分:负载弯曲时温度的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 13: determination of temperature at deflection under load; German version EN 2155-13:1993) |
DIN EN 2155-14-1993 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第14部分:1/10维卡特软化温度的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 14: determination of the 1/10 vicat softening temperature; German version EN 2155-14:1993) |
DIN EN 2155-19-1996 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第19部分:抗应力裂纹强度的测定 |
(Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of crace resistance; German version EN 2155-19:1996) |
DIN EN 2155-2-1993 |
航空航天系列.飞行器门窗玻璃用透明材料的试验方法.第2部分:吸水率测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 2: determination of water absorption; german version EN 2155-2:1993) |
DIN EN 2155-21-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第21部分:裂纹扩张抗力的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 21: determination of resistance to crack propagation (K-factor); german version EN 2155-21:1989) |
DIN EN 2155-3-1993 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第3部分:折射率的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 3: determination of refractive index; German version EN 2155-3:1993) |
DIN EN 2155-5-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第5部分:可见光传输测量 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 5: determination of visible light transmission; german version EN 2155-5:1989) |
DIN EN 2155-7-1997 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第7部分:光偏移的测定 |
(Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation; German version EN 2155-7:1997) |
DIN EN 2155-8-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第8部分:光学畸变的测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 8: determination of optical distortion; german version EN 2155-8:1989) |
DIN EN 2155-9-1989 |
航空航天系列.飞行器上门窗玻璃用透明材料的试验方法.第9部分:浊度测定 |
(Aerospace series; test methods for transparent materials for aircraft glazing; part 9: determination of haze; german version EN 2155-9:1989) |
DIN EN 21560-1991 |
牙科学.牙医用汞 |
(Dentistry; dental mercury (ISO 1560:1985); german version EN 21560:1991) |
DIN EN 21563-1992 |
藻酸盐牙印模材料(ISO1563-90) |
(Dental alginate impression material; german version EN 21563:1991) |
DIN EN 2157-1-1993 |
航空航天.钢.锻坯和锻件.交货技术条件.第1部分:一般要求 |
(Aerospace series; steel; forging stock and forgings; technical specifications; part 1: general requirements; German version EN 2157-1:1993) |
DIN EN 2157-2-1993 |
航空航天.钢.锻坯和锻件.交货技术条件.第2部分:锻坯 |
(Aerospace series; steel; forging stock and forgings; technical specification; part 2: forging stock; German version EN 2157-2:1993) |
DIN EN 2157-3-1993 |
航空航天.钢.锻坯和锻件.交货技术条件.第3部分:预锻件和成批锻件 |
(Aerospace series; steel; forging stock and forgings; technical specification; part 3: pre-production and production forgings; German version EN 2157-3:1993) |
DIN EN 21683-1994 |
声学.音响强度的优选参考量 |
(Acoustics - Preferred reference quantities for acoustic levels (ISO 1683:1983); German version EN 21683:1994) |
DIN EN 21864-1994 |
信息处理.32,126和356次磁通变换/毫米(800,3200和9042次磁通变换/英寸)时数据交换用宽12.7毫米(0.5英寸)未 |
(Information technology; unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange; 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3200 ftpi) phase encoded and 356 ftpmm (9042 ftpi) NRZ1 (ISO/IEC 1864:1992); German version EN 21864:1993) |
DIN EN 21942-1-1991 |
牙科术语.第1部分:一般及临床术语(ISO1942-1:1989) |
(Dental vocabulary; part 1: general and clinical terms (ISO 1942-1:1989); german version EN 21942-1:1991) |
DIN EN 21942-2-1993 |
牙科学.术语.第2部分:牙科材料 |
(Dental vocabulary; part 2: dental materials (ISO 1942-2:1989); german version EN 21942-2:1992) |
DIN EN 21942-3-1993 |
牙科学.词汇.第3部分:牙科器械 |
(Dental vocabulary; part 3: dental instruments (ISO 1942-3:1989); German version EN 21942-3:1993) |
DIN EN 21942-4-1994 |
牙科词汇.第4部分:牙科设备 |
(Dental vocabulary; part 4: dental equipment (ISO 1942-4:1989); German version EN 21942-4:1993) |
DIN EN 21974-1994 |
纸.抗扯裂的测定(埃尔门多夫Elmendorf扯裂试验法) |
(Paper and board - Determination of tearing resistance (Elmendorf method) (ISO 1974:1990); German version EN 21974:1994) |
DIN EN 22-1975 |
木材防腐剂.对消灭家天牛的幼虫作用的测定(实验室法) |
(Wood Preservatives; Determination of Eradicant Action against Hylotrupes Bajulus (Linnaeus) Larvae (laboratory Method)) |
DIN EN 22063-1994 |
金属涂层和其它无机物涂层.热喷镀.锌、铝、及其合金` |
(Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys (ISO 2063:1991); German version EN 22063:1993) |
DIN EN 22206-1993 |
包装.满装的运输包装.试验的包装件要素的标识 |
(Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987); german version EN 22206:1992) |
DIN EN 22248-1993 |
包装.满装的运输包装.坠落冲击试验 |
(Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992) |
DIN EN 22313-1992 |
纺织品.用测量回复角的方法确定纬向折皱织物试样的折皱恢复能力 |
(Textiles; determination of the recovery form creasing of a horizontally folded specimen by measuring the angle of recovery (ISO 2313:1972); german version EN 22313:1992) |
DIN EN 22339-1992 |
未淬火的锥销 |
(Taper pins, unhardened (ISO 2339:1986); german version EN 22339:1992) |
DIN EN 22340-1992 |
无头螺栓 |
(Clevis pins without head (ISO 2340:1986); german version EN 22340:1992) |
DIN EN 22341-1992 |
有头螺栓 |
(Clevis pins with head (ISO 2341:1986); german version EN 22341:1992) |
DIN EN 2236-1992 |
航空和航天.带合金钢头的配合螺栓.交货技术条件 |
(Aerospace series; pins, shear, headed, close tolerance shank, alloy steel; technical specification; german version EN 2236:1992) |
DIN EN 22401-1994 |
涂敷焊条.效率,金属回收和熔敷系数的测定 |
(Covered electrodes; determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:1972); German version EN 22401:1994) |
DIN EN 2243-2-1991 |
航空和航天.结构胶粘剂.检验方法.第2部分:金属-金属滚动剥离试验 |
(Aerospace series; structural adhesives; test methods; part 2: peel metal-metal; german version EN 2243-2:1991) |
DIN EN 2243-3-1992 |
航空和航天.构件胶粘剂.检验方法.第3部分:蜂窝芯剥离试验 |
(Aerospace series; structural adhesives; test methods; part 3: peeling test metal-honeycomb core; german version EN 2243-3:1991) |
DIN EN 2243-4-1991 |
航空和航天.结构胶粘剂.检验方法.第4部分:蜂窝式金属芯与层面垂直的拉伸试验 |
(Aerospace series; structural adhesives; test methods; part 4: metal-honeycomb core flatwise tensile test; german version EN 2243-4:1991) |
DIN EN 2243-5-1992 |
航空和航天.结构胶粘剂.检验方法.第5部分:老化试验 |
(Aerospace series; structural adhesives test methods; part 5: ageing tests; german version EN 2243-5:1992) |
DIN EN 225-1989 |
油雾化燃烧器.带旋转轴和外部驱动的泵.尺寸 |
(Atomizing oil burners; pumps with rotating shaft and external drive; dimensions; german version EN 225:1987) |
DIN EN 22553-1997 |
焊接接缝和软钎焊接缝.图纸上符号表示法 |
(Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992); German version EN 22553:1994) |
DIN EN 22568-1990 |
手用和机用圆板牙和圆板牙架(ISO2568:1988) |
(Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988); german version EN 22568:1989) |
DIN EN 2257-1997 |
航空和航天.铝和铝合金制结构圆管.直径6mm= |
(Aerospace series - Circular tubes for structures in aluminium and aluminium alloys; diameter 6 mmD100 mm, thickness 1 mma6 mm; dimensions; German version EN 2257:1997) |
DIN EN 2258-1997 |
航空和航天.铝和铝合金制圆形管道.直径3.2mm= |
(Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mmD100 mm, thickness 0,6 mma2,5 mm; dimensions; German version EN 2258:1997) |
DIN EN 2259-1995 |
航空和航天.硅树脂橡胶(VMQ).硬度:50IRHD(国际橡胶硬度标度) |
(Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995) |
DIN EN 226-1988 |
油雾化燃烧器.燃烧器和发热器之间的连接尺寸 |
(Atomizing oil burners; connecting dimensions between burners and heat generators; german version EN 226:1987) |
DIN EN 2260-1995 |
航空和航天.硅树脂橡胶(VMQ).硬度:60IRHD |
(Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995) |
DIN EN 2261-1995 |
航空和航天.硅树脂橡胶(VMQ).硬度:70IRHD |
(Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995) |
DIN EN 2262-1995 |
航空和航天.高撕裂强度的硅合成橡胶(VMQ/PVMQ).硬度:50IRHD |
(Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995) |
DIN EN 2264-1996 |
航空和航天.合金钢制镀镉MoS2润滑带各种深度园柱形沉头孔双面法兰活动式自锁铆接螺母.等级:900MPa(室温下)/ |
(Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS lubricated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 2264:1996) |
DIN EN 22719-1993 |
石油产品和润滑材料.燃点的测定.潘斯基-马丁闭杯法 |
(Petroleum products and lubricants; determination of flash point; Pensky-Martens closed cup method (ISO 2719:1988); German version EN 22719:1993) |
DIN EN 228-2000 |
机动车用燃料.无铅汽油.要求和试验方法.德语版EN228:1999 |
(Automotive fuels - Unleaded petrol - Requirements and test methods; German version EN 228:1999) |
DIN EN 228-2004 |
机动车用燃料.无铅汽油.要求和试验方法 |
|
DIN EN 2282-1992 |
航空和航天.飞机的供电特性 |
(Aerospace series; characteristics of aircraft electrical supplies; german version EN 2282:1991) |
DIN EN 2283-1996 |
航空和航天.检验飞机上电缆的敷设 |
(Aerospace series - Testing of aircraft wiring; German version EN 2283:1996) |
DIN EN 2284-1991 |
航空和航天.铝和锻铝合金的硫酸阳极氧化 |
(Aerospace series; sulphuric acid anodizing of aluminium and wrougth aluminium alloys; german version EN 2284:1991) |
DIN EN 2285-1990 |
航空和航天.带自动润滑涂层铝合金制无法兰的套筒.尺寸和负载 |
(Aerospace series; bushes plain, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2285:1989) |
DIN EN 22857-1990 |
ISO公制螺纹公差为4H到8H.以及4G到6G的粗牙与细牙螺纹用磨削丝锥.螺纹部分的制造公差 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989) |
DIN EN 22858-1993 |
离心式末端轴吸泵(额定压力16巴)标记、额定功率和尺寸 |
(End-suction centrifugal pumps (rating 16 bar); designation, nominal duty point and dimensions (ISO 2858:1975); German version EN 22858:1993) |
DIN EN 2286-1990 |
航空和航天.带自动润滑涂层铝合金制有法兰的套筒.尺寸和负载 |
(Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2286:1989) |
DIN EN 2287-1990 |
航空和航天.带自动润滑涂层铝合金制无法兰的套筒.尺寸和负载 |
(Aerospace series; bushes, plain, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2287:1989) |
DIN EN 22876-1993 |
包装.满装的运输包装.滚动试验(顺序) |
(Packaging; complete, filled transport packages; rolling test (ISO 2876:1985); german version EN 22876:1992) |
DIN EN 2288-1990 |
航空和航天.带自动润滑涂层铝合金制有法兰的套筒.尺寸和负载 |
(Aerospace series; bushes, flanged, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2288:1989) |
DIN EN 2289-1996 |
航空和航天.飞行控制用铝合金制管身.交货技术条件 |
(Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification; German version EN 2289:1996) |