标准号 |
中文名称 |
英文名称 |
DIN EN ISO 8733-1998 |
未淬硬钢或奥氏体不锈钢制带内螺孔的平行销 |
Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997 |
DIN EN ISO 8734-1998 |
淬硬钢和马氏体不锈钢制平行销 |
Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997 |
DIN EN ISO 8735-1998 |
淬硬钢和马氏体不锈钢制带内螺纹的平行销 |
Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997 |
DIN EN ISO 8739-1998 |
槽销.带导向的全长平行槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997 |
DIN EN ISO 8740-1998 |
槽销.带倒角的全长平行槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997 |
DIN EN ISO 8741-1998 |
槽销.半长倒锥槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997 |
DIN EN ISO 8742-1998 |
槽销.三分之一长中心槽 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997 |
DIN EN ISO 8743-1998 |
槽销.半长中心槽 |
Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997 |
DIN EN ISO 8744-1998 |
槽销.全长锥型槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997 |
DIN EN ISO 8745-1998 |
槽销.半长锥型槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997 |
DIN EN ISO 8746-1998 |
圆头槽销 |
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997 |
DIN EN ISO 8747-1998 |
沉头槽销 |
Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997 |
DIN EN ISO 8748-1998 |
弹簧型开口直销.重载盘绕式 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997); German version EN ISO 8748:1997 |
DIN EN ISO 8750-1998 |
弹簧型开口直销.标准负荷盘绕式 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997); German version EN ISO 8750:1997 |
DIN EN ISO 8751-1998 |
弹簧型开口直销.轻负荷盘绕式 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997); German version EN ISO 8751:1997 |
DIN EN ISO 8752-1998 |
弹簧直销.开槽重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997 |
DIN EN ISO 8754-1995 |
石油产品.硫含量测定.能量分散X射线荧光法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence method (ISO 8754:1992); German version EN ISO 8754:1995 |
DIN EN ISO 8765-2001 |
有米制细牙螺纹的六角头螺栓.产品等级A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999); German version EN ISO 8765:2000 |
DIN EN ISO 877-1997 |
塑料.自然风化法,窗玻璃后照射法和用夫累内尔镜光照辐射加速风化法 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994): German version EN ISO 877:1996 |
DIN EN ISO 8780-1-1995 |
颜料和稀释剂.色散特性评定用色散方法.第1部分:前言 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990); German version EN ISO 8780-1:1995 |
DIN EN ISO 8780-2-1995 |
颜料和稀释剂.色散特性评定用色散方法.第2部分:色散用振荡摇动机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990); German version EN ISO 8780-2:1995 |
DIN EN ISO 8780-3-1995 |
颜料和稀释剂.色散特性评定用色散方法.第3部分:色散用高速叶轮机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990); German version EN ISO 8780-3:1995 |
DIN EN ISO 8780-4-1995 |
颜料和稀释剂.色散特性评定用色散方法.第4部分:色散用压片机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990); German version EN ISO 8780-4:1995 |
DIN EN ISO 8780-5-1995 |
颜料和稀释剂.色散特性评定用色散方法.第5部分:色散用自动研磨机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995 |
DIN EN ISO 8780-6-1995 |
颜料和稀释剂.色散特性评定用色散方法.第6部分:色散用三组镇压机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990); German version EN ISO 8780-6:1995 |
DIN EN ISO 8781-1-1995 |
颜料和稀释剂.色散特性评定方法.第1部分:有色颜料着色度变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990); German version EN ISO 8781-1:1995 |
DIN EN ISO 8781-2-1995 |
颜料和稀释剂.色散特性评定方法.第2部分:磨碎细度变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990); German version EN ISO 8781-2:1995 |
DIN EN ISO 8781-3-1995 |
颜料和稀释剂.色散特性评定方法.第3部分:光泽变化评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990); German version EN ISO 8781-3:1995 |
DIN EN ISO 8785-1999 |
几何制品技术规格.表面不完全性.术语、定义和参数 |
Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999 |
DIN EN ISO 8795-2001 |
人类生活用水的塑料输水管道系统.迁移评定.塑料管、配件及其接头迁移值的测定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001 |
DIN EN ISO 8799-1995 |
表面活性剂.硫酸乙氧乙醇和硫酸乙氧烷基苯酚.非硫化物含量的测量 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988); German version EN ISO 8799:1995 |
DIN EN ISO 8819-1995 |
液化石油气.硫化氢的测定.醋酸铅法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993); German version EN ISO 8819:1995 |
DIN EN ISO 8847-2004 |
小艇.操舵装置.钢索和滑轮系统 |
|
DIN EN ISO 8849-2004 |
小艇.电动直流舱底泵 |
(Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003); German version EN ISO 8849:2003) |
DIN EN ISO 8849-2004 |
小艇.电动直流舱底泵 |
|
DIN EN ISO 8861-1998 |
造船.柴油机船的发动机室的通风.设计要求和计算依据 |
Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998); German version EN ISO 8861:1998 |
DIN EN ISO 887-2000 |
通用米制螺栓、螺钉和螺母用的平垫圈.一般示意图 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000); German version EN ISO 887:2000 |
DIN EN ISO 8871-1-2004 |
非肠道及制药设备用弹性件.第1部分:水蒸汽中的提取物 |
|
DIN EN ISO 8871-2-2004 |
非肠道及制药设备用弹性件.第2部分:识别和表征 |
|
DIN EN ISO 8871-3-2004 |
非肠道及制药设备用弹性件.第3部分:释放粒子计数的测定 |
|
DIN EN ISO 8891-2000 |
贵金属含量至少为25%但小于75%的牙科用铸造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998); German version EN ISO 8891:2000 |
DIN EN ISO 8892-1995 |
油料种子残渣.己烷总残留量的测定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987); German version EN ISO 8892:1995 |
DIN EN ISO 8968-1-2002 |
牛奶.测定氮含量.第1部分:基耶达尔法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001); German version EN ISO 8968-1:2001 |
DIN EN ISO 8968-2-2002 |
牛奶.测定氮含量.第2部分:分段容积法(宏观法) |
Milk - Determination of nitrogen content - Part 2: Block-digestion method (Macro method) (ISO 8968-2:2001); German version EN ISO 8968-2:2001 |
DIN EN ISO 8968-4-2002 |
牛奶.测定氮含量.第4部分:无蛋白质的氮含量测定 |
Milk - Determination of nitrogen content - Part 4: Determination of the non-protein-nitrogen content (ISO 8968-4:2001); German version EN ISO 8968-4:2001 |
DIN EN ISO 8968-5-2002 |
牛奶.测定氮含量.第5部分:蛋白质的氮含量测定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001); German version EN ISO 8968-5:2001 |
DIN EN ISO 8973-2000 |
液化石油气.密度和蒸气压力的计算 |
Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999 |
DIN EN ISO 8974-2002 |
塑料.酚醛树脂.用气体色谱法测定残余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002); German version EN ISO 8974:2002 |
DIN EN ISO 898-1-1999 |
碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺杆和双头螺栓 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 |
DIN EN ISO 898-5-1998 |
碳钢和合金钢制连接件的机械性能.第5部分:螺销和类似非拉伸受力的连接件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998 |
DIN EN ISO 898-6-1996 |
紧固件的机械性能.第6部分:带规定试验力的螺母.细牙螺纹 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995 |
DIN EN ISO 8980-1-1997 |
眼科光学.未打磨完成的眼镜片.第1部分:单光多焦透镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996); German version EN ISO 8980-1:1997 |
DIN EN ISO 8980-1-2004 |
眼科光学.未切边成品眼镜片.第1部分:单焦点和多焦点镜片规范 |
|
DIN EN ISO 8980-2-1997 |
眼科光学.未打磨完成的眼镜片.第2部分:渐变眼镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996); German version EN ISO 8980-2:1997 |
DIN EN ISO 8980-2-2004 |
眼科光学.未切边成品眼镜片.第2部分:渐变焦眼镜片规范 |
|
DIN EN ISO 8980-3-1999 |
眼科光学.未打磨完成的眼镜片.第3部分:透射要求和检验方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999); German version EN ISO 8980-3:1999 |
DIN EN ISO 8980-4-2000 |
眼科光学.未打磨成品柔性焦距透镜组.第4部分:防反射涂层的试验方法和规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000); German version EN ISO 8980-4:2000 |
DIN EN ISO 8980-5-2005 |
眼科光学.未切边的成品眼镜镜片.第5部分:眼镜镜片表面耐磨性的最低要求 |
|
DIN EN ISO 8985-1998 |
塑料.乙烯/乙烯基乙酸盐共聚物(ENAC)热塑性.乙烯基乙酸盐含量的测定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998); German version EN ISO 8985:1998 |
DIN EN ISO 8986-1-1999 |
塑料.聚丁烯模制品和挤塑材料.第1部分:命名体系与基础规范. |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993); German version EN ISO 8986-1:1999 |
DIN EN ISO 8986-2-2000 |
塑料.聚丁烯(PB)模塑和挤制材料.第2部分:试样的制备和性能的测定.(包括修改件A1-2000) |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:1995 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 8986-2:2000 |
DIN EN ISO 8987-1998 |
塑料.酚醛树脂.在B转变试验板上的活性测定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:1995); German version EN ISO 8987:1998 |
DIN EN ISO 8987-2005 |
塑料.酚醛树脂.在B转变试验板上的活化性能的测定 |
|
DIN EN ISO 8988-1997 |
塑料.酚醛树脂.六亚甲基四胺含量的测定.基耶达斯法和高氯酸法 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method (ISO 8988:1995); German version EN ISO 8988:1997 |
DIN EN ISO 8989-1998 |
塑料.酚醛树脂.水的可混性的测定 |
Plastics - Phenolic resins - Determination of water miscibility (ISO 8989:1995); German version EN ISO 8989:1998 |
DIN EN ISO 899-1-1997 |
塑料.蠕变的测定.第1部分:拉申蠕变 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:1993); German version EN ISO 899-1:1996 |
DIN EN ISO 899-2-1997 |
塑料.蠕变性能的测定.第2部分:三点负载时弯曲蠕变 |
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:1993); German version EN ISO 899-2:1996 |
DIN EN ISO 8990-1996 |
热绝缘.稳定状态中热通过特性的测定.校正及屏蔽的隔热箱法 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994); German version EN ISO 8990:1996 |
DIN EN ISO 8996-2005 |
热环境的人类工效学.代谢率的测定 |
|
DIN EN ISO 90-1-1999 |
轻型测量金属容器.尺寸和容量测定的定义和方法.第1部分:顶开口罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997); German version EN ISO 90-1:1999 |
DIN EN ISO 90-2-1999 |
轻型测量金属容器.尺寸和容量测定的定义和方法.第2部分:通用容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997); German version EN ISO 90-2:1999 |
DIN EN ISO 90-3-2001 |
轻型金属容器.尺寸和容量测定的定义和方法.第3部分:气溶胶罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000); German version EN ISO 90-3:2001 |
DIN EN ISO 9000 Berichtigung 1-2003 |
对DIN EN ISO 9000:2000-12的技术勘误 |
Corrigenda to DIN EN ISO 9000:2000-12 |
DIN EN ISO 9000-2000 |
质量管理体系.基础和词汇 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000); Trilingual version EN ISO 9000:2000 |
DIN EN ISO 9000-2005 |
质量管理体系.基础和词汇 |
|
DIN EN ISO 9000-3-1998 |
质量管理和质量保证标准.第3部分:ISO 9001-94计算机软件的开发,供给,安装和维护应用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software (ISO 9000-3:1997); Bilingual version EN ISO 9000-3:1997 |
DIN EN ISO 9001-2000 |
质量管理体系.要求 |
Quality management systems - Requirements (ISO 9001:2000); Trilingual version EN ISO 9001:2000 |
DIN EN ISO 9004-2000 |
质量管理体系.性能改进导则 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000); Trilingual version EN ISO 9004:2000 |
DIN EN ISO 9013-1995 |
焊接和同类工艺.热切割(氧/燃气火焰)表面质量分类和尺寸公差 |
Welding and allied processes - Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces (ISO 9013:1992); German version EN ISO 9013:1995 |
DIN EN ISO 9013-2003 |
热切割.热切割分类.产品几何量技术规范和质量公差 |
(Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002); German version EN ISO 9013:2002) |
DIN EN ISO 9018-2004 |
金属材料焊缝的破坏试验.十字形和搭接焊缝抗拉试验 |
|
DIN EN ISO 9020-1998 |
色漆和清漆用粘合剂.胺类树脂的自由甲醛含量的测定 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996); German version EN ISO 9020:1998 |
DIN EN ISO 9029-1995 |
原油.水分测定.蒸馏法 |
Crude petroleum - Determination of water - Distillation method (ISO 9029:1990); German version EN ISO 9029:1995 |
DIN EN ISO 9038-2004 |
液体的耐燃性试验 |
|
DIN EN ISO 9047-1998 |
建筑结构.密封料.在不同温度下的粘附作用/粘聚性能的测定 |
Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures (ISO 9047:1989); German version EN ISO 9047:1997 |
DIN EN ISO 9054-2000 |
硬质泡沫塑料.自结皮高密度材料的试验方法 |
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990); German version EN ISO 9054:1999 |
DIN EN ISO 9073-2-1997 |
纺织品.非织物的试验方法.第2部分:厚度的测定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (ISO 9073-2:1995); German version EN ISO 9073-2:1996 |
DIN EN ISO 9073-4-1997 |
纺织品.非织物的试验方法.第4部分:抗撕裂扩展强度的测定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997); German version EN ISO 9073-4:1997 |
DIN EN ISO 9073-6-2003 |
纺织品.非织造品的试验方法.第6部分:吸收性 |
Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000); German version EN ISO 9073-6:2003 |
DIN EN ISO 9073-7-1998 |
纺织品.非织造品的试验方法.第7部分:弯曲长度的测定 |
Textiles - Test methods for non-wovens - Part 7: Determination of bending length (ISO 9073-7:1995); German version EN ISO 9073-7:1998 |
DIN EN ISO 9073-8-1998 |
纺织品.非织造品的试验方法.第8部分:液体渗透时间的测定(模拟尿) |
Textiles - Test methods for non-wovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995); German version EN ISO 9073-8:1998 |
DIN EN ISO 9073-9-1998 |
纺织品.非织造品的试验方法.第9部分:悬垂系数的测定 |
Textiles - Test methods for non-wovens - Part 9: Determination of drape coefficient (ISO 9073-9:1995); German version EN ISO 9073-9:1998 |
DIN EN ISO 9093-1-1998 |
小船.船底阀和船体外壳管配件.第1部分:金属件 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997 |
DIN EN ISO 9093-2-2003 |
小艇.通海旋塞及贯穿艇体配件.第2部分:非金属的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002); German version EN ISO 9093-2:2002 |
DIN EN ISO 9094-1-2003 |
小艇.防火.第2部分:艇体长为15m及以下的小艇 |
(Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003); German version EN ISO 9094-1:2003) |
DIN EN ISO 9094-2-2003 |
小艇.防火.第2部分:艇体长超过15m的小艇 |
(Small craft - Fire protection - Part 2: Craft with a hull length of over than 15 m (ISO 9094-2:2002); German version EN ISO 9094-2:2002) |
DIN EN ISO 9097 Berichtigung 1-2001 |
DIN EN ISO 9097-1994的勘误 |
Corrigendum to DIN EN ISO 9097:1994 (German version EN ISO 9097:1994/A1:2000) |
DIN EN ISO 9097-1995 |
小型舰船.电扇 |
Small craft - Electric fans (ISO 9097:1991); German version EN ISO 9097:1994 |
DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸缘瓶口.第5部分:普通规格43和48 |
|
DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸缘瓶口.第5部分:普通规格43和48 |
|
DIN EN ISO 9100-5-2005 |
玻璃容器.真空凸缘瓶口.第5部分:普通规格43和48 |
|
DIN EN ISO 9142-2004 |
胶粘剂.粘接接头测试用标准试验室老化条件的选择指南 |
|
DIN EN ISO 9163-1998 |
纺织玻璃纤维.粗纱.试样的制造和浸渍粗纱拉伸强度的测定 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996); German version EN ISO 9163:1998 |
DIN EN ISO 9163-2005 |
纺织玻璃纤维.粗纱.试样的制备和浸渍粗纱拉伸强度的测定 |
|
DIN EN ISO 9167-1-1995 |
油菜种子.葡萄糖甙含量测定.第1部分:高性能液相色谱法 |
Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performance liquid chromatography (ISO 9167-1:1992); German version EN ISO 9167-1:1995 |
DIN EN ISO 9167-2-1997 |
油菜种子.葡萄糖甙含量测定.第2部分:X线荧光分析法 |
Rapeseed - Determination of glucosinolates content - Part 2: Method using X-ray fluorescence spectrometry (ISO 9167-2:1994); German version EN ISO 9167-2:1997 |
DIN EN ISO 9173-1-1995 |
拔牙钳.第1部分:螺钉和铰链接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991); German version EN ISO 9173-1:1995 |
DIN EN ISO 9187-1-2004 |
医用注射设备.第1部分:注射用安瓿瓶 |
|
DIN EN ISO 9220-1995 |
金属镀层.镀层厚度的测量.扫描电子显微镜法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994 |
DIN EN ISO 9237-1995 |
纺织品.纤维织物透气性的测定 |
Textiles - Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 |
DIN EN ISO 9239-1-2002 |
地板对燃烧试验反应.第1部分:用辐射热源测定燃烧特性 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002); German version EN ISO 9239-1:2002 |
DIN EN ISO 9241-1-2002 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第1部分:概述 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction (ISO 9241-1:1997) (including Amendment AMD 1:2001); German version EN ISO 9241-1:1997 + A1:2001 |
DIN EN ISO 9241-10-1996 |
用屏幕终端的办公室工作的人类工效学要求.第10部分:对话结构的原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996); German version EN ISO 9241-10:1996 |
DIN EN ISO 9241-11-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第11部分:使用性能指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998); German version EN ISO 9241-11:1998 |
DIN EN ISO 9241-12-2000 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第12部分:信息表示法 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998); German version EN ISO 9241-12:1998 |
DIN EN ISO 9241-13-2000 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第13部分:用户导则 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998); German version EN ISO 9241-13:1998 |
DIN EN ISO 9241-14-2000 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第14部分:对话菜单 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997); German version EN ISO 9241-14:1999 |
DIN EN ISO 9241-15-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第15部分:通过命令语言进行的对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997); German version EN ISO 9241-15:1997 |
DIN EN ISO 9241-16-2000 |
带有可视显示终端的办公室工作的人类工效学要求.第16部分:直接操作对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct-manipulation dialogues (ISO 9241-16:1999); German version EN ISO 9241-16:1999 |
DIN EN ISO 9241-17-2000 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第17部分:表格填写对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998); German version EN ISO 9241-17:1998 |