标准号 |
中文名称 |
英文名称 |
| BS EN ISO 12957-1-2005 |
土工织物.摩擦特性测定.直接剪切试验 |
|
| BS EN ISO 12957-1-2005 |
土工织物.摩擦特性测定.直接剪切试验 |
|
| BS EN ISO 12957-2-2005 |
土工织物.摩擦特性测定.倾斜面试验 |
|
| BS EN ISO 12957-2-2005 |
土工织物.摩擦特性测定.倾斜面试验 |
|
| BS EN ISO 12958-1999 |
土工织物及其相关产品.水平水流容量的测定 |
(Geotextiles and geotextile-related products - Determination of water flow capacity in their plane) |
| BS EN ISO 13000-1-1998 |
塑料.聚四氟乙烯(PTFE)半成品.要求和设计 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Requirements and designation) |
| BS EN ISO 13000-2-1998 |
塑料.聚四氟乙烯(PTFE)半成品.试样的制备和性能的测定 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Preparation of test specimens and determination of properties) |
| BS EN ISO 13002-1999 |
碳纤维.长丝纱命名体制 |
Carbon fibre - Designation system for filament yarns |
| BS EN ISO 1302-2002 |
产品几何量技术规范.技术产品文件中表面结构的表示方式 |
Geometrical product specifications (GPS) - Indication of surface texture in technical product documentation |
| BS EN ISO 1307-1996 |
工业通用橡胶和塑料软管.孔直径和公差.长度公差 |
(Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length) |
| BS EN ISO 13090-1-1998 |
机械振动和冲击.试验及与人有关的实验安全方面指南.第1部分:机械振动和反复冲击下的试验 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Exposure to whole-body mechanical vibration and repeated shock |
| BS EN ISO 13212-1999 |
眼科光学.接触镜片保护产品.储存期限的测定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life |
| BS EN ISO 13230-1999 |
眼科光学.条形码规范 |
Ophthalmic optics - Bar code specifications |
| BS EN ISO 13294-1997 |
牙钻手柄.牙钻气动机 |
Dental handpieces - Dental air-motors |
| BS EN ISO 13295-1995 |
牙科旋切器.心轴 |
Dental rotary instruments - Mandrels |
| BS EN ISO 13297-2001 |
小船.电气系统.交流电气设备 |
Small craft - Electrical systems - Alternating current installations |
| BS EN ISO 13337-1998 |
弹簧型直销钉.狭缝型,轻负载 |
(Spring-type straight pins - Slotted, light duty) |
| BS EN ISO 13340-2001 |
可运输燃气瓶.非再填充钢瓶的钢瓶阀门.规范和原型试验 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
| BS EN ISO 13341-1998 |
可运输储气瓶.储气瓶阀配件 |
Transportable gas cylinders - Fitting of valves to gas cylinders |
| BS EN ISO 13366-1-1997 |
乳.体细胞的计数.第1部分:显微法 |
Milk - Enumeration of somatic cells - Microscopic method |
| BS EN ISO 13366-2-1997 |
乳.体细胞的计数.第2部分:电子粒子计数法 |
Milk - Enumeration of somatic cells - Method using an electronic particle counter |
| BS EN ISO 13366-3-1997 |
乳.体细胞的计数.第3部分:荧光光电法 |
Milk - Enumeration of somatic cells - Fluoro-opto-electronic method |
| BS EN ISO 13370-1998 |
建筑物的热性能.经由地面的热传递.计算方法 |
Thermal performance of buildings - Heat transfer via the ground - Calculation methods |
| BS EN ISO 13395-1996 |
水质.用流量分析法和光谱检出法测定亚硝酸氮和硝酸氮及两者的总含量(CFA和FIA). |
Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| BS EN ISO 13397-1-1996 |
牙周刮匙,牙刮除器和牙钻孔器.第1部分:一般要求 |
(Periodontal curettes, dental scalers and excavators - General requirements) |
| BS EN ISO 13397-2-1997 |
牙周刮匙,牙刮除器和牙钻孔器.第2部分:GR 型牙周刮匙 |
(Periodontal curettes, dental scalers and excavators - Periodontal curettes - Gr-type) |
| BS EN ISO 13397-3-1997 |
牙周刮匙,牙刮除器和牙钻孔器.第3部分:H 型牙刮除器 |
(Periodontal curettes, dental scalers and excavators - Dental scalers - H-type) |
| BS EN ISO 13397-4-1998 |
牙周刮匙、牙刮除器和牙钻孔器.牙科用钻孔器.圆盘型 |
(Periodontal curettes, dental scalers and excavators - Dental excavators - Discoid type) |
| BS EN ISO 13406-1-1999 |
基于平坦面板的视觉显示的人类工效学要求.介绍 |
(Ergonomic requirements for work with visual display based on flat panels - Introduction) |
| BS EN ISO 13406-2-2002 |
平板视觉显示工作的人类工效学要求.平板显示的人类工效学要求 |
(Ergonomic requirements for work with visual display based on flat panels - Ergonomic requirements for flat panel displays) |
| BS EN ISO 13407-1999 |
交互系统以人为中心的设计过程 |
(Human-centred design processes for interactive systems) |
| BS EN ISO 13426-1-2003 |
土工织物及其有关产品.内部结构联结强度.土工网眼 |
(Geotextiles and geotextile-related products - Strength of internal structural junctions - Geocells) |
| BS EN ISO 13426-2-2005 |
土工织物及其有关产品.内部结构连接强度.土工合成物 |
|
| BS EN ISO 13427-1998 |
土工织物及其相关制品.磨损模拟(滑块试验) |
(Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test).) |
| BS EN ISO 13428-2005 |
土工合成织物.土工合成织物抗冲击损坏的保护效率测定 |
|
| BS EN ISO 13428-2005 |
土工合成织物.土工合成织物抗冲击损坏的保护效率测定 |
|
| BS EN ISO 13431-1999 |
土工织物和土工织物相关产品.拉伸蠕变和蠕变断裂性能的测定 |
(Geotextiles and geotextiles-related products - Determination of tensile creep and creep rupture behaviour) |
| BS EN ISO 13437-1998 |
土工织物及其相关制品.装配、土壤中萃取抽样和实验室用试样试验的方法 |
(Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory) |
| BS EN ISO 1346-2004 |
纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3).3、4和8股绳索 |
|
| BS EN ISO 1346-2004 |
纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3).3、4和8股绳索 |
|
| BS EN ISO 13468-1-1997 |
塑料.透明材料光透射率总量的测定.第1部分:单束发射仪器 |
(Plastics - Determination of the total luminous transmittance of transparent materials - Single-beam instrument) |
| BS EN ISO 13473-1-2004 |
表面外观路面结构的特性.平均剖面高度的测定 |
|
| BS EN ISO 13478-1997 |
流体传送用热塑性塑料管道.抗快速破裂扩展性(RCP)的测定.实物试验 |
(Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test) |
| BS EN ISO 13479-1997 |
流体传输用聚烯烃管.抗破裂扩展性的测定.有凹口的管上裂纹缓慢增长的试验方法(切口试验) |
(Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test)) |
| BS EN ISO 13485-2003 |
医疗设备.质量管理体系.管理要求 |
(Medical devices - Quality management systems - Requirements for regulatory purposes) |
| BS EN ISO 13500-1999 |
石油和天然气工业.钻用清洗液材料.规范和试验 |
(Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests) |
| BS EN ISO 13533-2002 |
石油和天然气工业.钻孔和生产设备.钻孔设备 |
(Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment) |
| BS EN ISO 13534-2001 |
石油和天然气工业.钻探和生产设备.提升设备的检验、维护、修理和再制造 |
(Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and re-manufacture of hoisting equipment) |
| BS EN ISO 13535-2001 |
石油和天然气工业.开采和生产设备.提升设备 |
(Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment) |
| BS EN ISO 13565-1-1997 |
几何制品规范(GPS).表面特征:轮廓法.表面分层功能特性.筛选和一般测量条件 |
(Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Filtering and general measurement conditions) |
| BS EN ISO 13565-2-1997 |
几何制品规范(GPS).表面特征:轮廓法.表面分层功能特性.利用线材比例曲线表记述高度特性 |
(Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Height characterization using the linear material ration curve) |
| BS EN ISO 13565-3-2000 |
几何产品规范(GPS).表面特征:轮廓法.表面分层功能特性.利用材料的概率曲线表描述高度特性 |
(Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Height characterization using the material probability curve) |
| BS EN ISO 13567-1-2002 |
技术产品文件.计算机辅助设计(CAD)用层的编排和命名.综述和原则 |
(Technical product documentation - Organization and naming of layers for CAD - Overview and principles) |
| BS EN ISO 13567-2-2002 |
技术产品文件.计算机辅助设计(CAD)用层的编排和命名.结构文件中使用的概念、格式和代码 |
(Technical product documentation - Organization and naming of layers for CAD - Concepts, format and codes used in construction documentation) |
| BS EN ISO 13590-2004 |
小艇.个人艇.建造及系统安装要求 |
|
| BS EN ISO 13625-2003 |
石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器 |
(Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings) |
| BS EN ISO 13628-1-1999 |
石油和天然气工业.水下生产系统的设计和操作.一般要求和推荐规范 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - General requirements and recommendations) |
| BS EN ISO 13628-2-2001 |
石油和天然气工业.水下生产系统的设计和操作.水下和船用软管系统 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Flexible pipe systems for subsea and marine applications) |
| BS EN ISO 13628-3-2001 |
石油和天然气工业.水下生产系统的设计和操作.流线系统 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Through flowline (TFL) systems) |
| BS EN ISO 13628-4-1999 |
石油和天然气工业.水下生产系统的设计和操作.水下井口和主干设备 |
(Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea wellhead and tree equipment) |
| BS EN ISO 13631-2002 |
石油和天然气工业.包装用往复式气体压缩机 |
(Petroleum and natural gas industries - Packaged reciprocating gas compressors) |
| BS EN ISO 13666-1999 |
眼科光学.眼镜镜片.词汇 |
(Ophthalmic optics - Spectacle lenses - Vocabulary) |
| BS EN ISO 13680-2002 |
石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件 |
(Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions) |
| BS EN ISO 13691-2002 |
石油和天然气工业.专用高速齿轮组件 |
(Petroleum and natural gas industries - High-speed special-purpose gear units) |
| BS EN ISO 13694-2001 |
光学和光学设备.激光和有关激光的设备.激光束能量密度分布的试验方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution) |
| BS EN ISO 13695-2004 |
光学和光子学.激光和相关设备.激光的光谱特性的试验方法 |
|
| BS EN ISO 13696-2002 |
光和光学仪器.用光学零件对零落的放射能量的试验方法 |
(Optics and optical instruments - Test methods for radiation scattered by optical components) |
| BS EN ISO 13702-1999 |
石油和天然气工业.近海生产设备着火和爆炸的控制和减弱.要求和导则 |
(Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines) |
| BS EN ISO 13703-2001 |
石油和天然气工业.近海平台管道系统设计和安装 |
(Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms) |
| BS EN ISO 13705-2002 |
石油和天然气工业.一般熔炼厂用火加热器 |
(Petroleum and natural gas industries - Fired heaters for general refinery service) |
| BS EN ISO 13706-2000 |
石油和天然气工业.风冷式热交换器 |
(Petroleum and natural gas industries - Air cooled heat exchangers) |
| BS EN ISO 13709-2003 |
石油、石化和天然气工业用离心泵 |
(Centrifugal pumps for petroleum, petrochemical and natural gas industries) |
| BS EN ISO 13710-2004 |
石油、石化和天然气工业.往复式变容真空泵 |
|
| BS EN ISO 13716-2000 |
牙科学.可逆和不可逆水解胶体印模材料系统 |
(Dentistry - Reversible-irreversible hydrocolloid impression material systems) |
| BS EN ISO 13731-2002 |
热环境的人类工效学.词汇和符号 |
(Ergonomics of the thermal environment - Vocabulary and symbols) |
| BS EN ISO 13736-1998 |
石油产品和其它液体.闪点测定.阿贝耳闭杯法 |
(Petroleum products and other liquids - Determination of flash point - Abel closed cup method) |
| BS EN ISO 13753-1999 |
机械振动和冲击.手-臂振动.手-臂体系荷载时弹性材料振动可传递性的测量方法 |
(Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system) |
| BS EN ISO 13757-1996 |
液化石油气.油残余物的测定.高温法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Determination of oily residues - High temperature method) |
| BS EN ISO 13758-1997 |
石油和石油产品的试验方法.液化石油气.丙烷干燥性的评估.评估冻结法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method) |
| BS EN ISO 13759-1997 |
石油和石油产品.石油产品.光谱计方法对柴油燃料中烷基硝酸盐的测定 |
(Methods of test for petroleum and its products - Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method) |
| BS EN ISO 13760-2000 |
压力下流体运输用塑料管.累积损伤的计算方法 |
(Plastics pipes for the conveyance of fluids under pressure - Miner’s rule - Calculation method for cumulative damage) |
| BS EN ISO 13783-1998 |
塑料管道系统.未增塑聚氯乙烯(PVC-U)终负载承受双套节接点.受到弯曲和内部压力时强度和密封性的试验方法 |
(Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure) |
| BS EN ISO 13786-1999 |
建筑物构件的热性能.动态热特性.计算方法 |
(Thermal performance of building components - Dynamic thermal characteristics - Calculation methods) |
| BS EN ISO 13787-2003 |
建筑设备和工业装置用热绝缘产品.标称的传热性的测定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity) |
| BS EN ISO 13788-2002 |
建筑物部件和结构件的湿热性能.防止临界温度和缝隙冷凝的内表面温度.计算方法 |
(Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods) |
| BS EN ISO 13789-1999 |
建筑物热性能.传输热损失系数.计算方法 |
(Thermal performance of buildings - Transmission heat loss coefficient - Calculation method) |
| BS EN ISO 13790-2004 |
建筑物的热性能.对流式供暖能量消耗的计算 |
|
| BS EN ISO 13793-2001 |
建筑物的热性能.地基防冻胀的热设计 |
(Thermal performance of buildings - Thermal design of foundations to avoid frost heave) |
| BS EN ISO 13844-2000 |
塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接合.负压下的密封试验方法 |
(Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure) |
| BS EN ISO 13845-2000 |
塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接合.内压下角度偏转密封试验 |
(Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang) |
| BS EN ISO 13846-2001 |
塑料管道系统.热塑性压力管用端负载和无端负载支承组件和接头.内部水压下长期密封性的试验方法 |
(Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure) |
| BS EN ISO 13849-2-2003 |
机械安全.控制系统有关安全部分.确认 |
(Safety of machinery - Safety-related parts of control systems - Validation) |
| BS EN ISO 13897-2004 |
牙科学.汞齐合金胶囊 |
|
| BS EN ISO 139-2005 |
纺织品.调湿和试验用标准大气 |
|
| BS EN ISO 13900-2002 |
钢.测定硼的含量.蒸馏后用光谱测定法 |
(Steel - Determination of boron content - Curcumin spectrophotometric method after distillation) |
| BS EN ISO 13916-1997 |
焊接.预热温度、层间温度和预加热的维持温度测量的导则 |
(Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature) |
| BS EN ISO 13918-1998 |
焊接.弧螺栓焊接用螺栓和水泥箍 |
(Welding - Studs and ceramic ferrules for arc stud welding) |
| BS EN ISO 13919-1-1997 |
焊接.电子和激光射线焊接接头.缺陷的质量级别导则.钢 |
(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel) |
| BS EN ISO 13919-2-2001 |
焊接.电子和激光束焊接接头.缺陷的质量级别导则.铝及其可焊合金 |
(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys) |
| BS EN ISO 13920-1997 |
焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 |
(Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position) |
| BS EN ISO 13927-2001 |
塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验 |
(Plastics - Simple heat release test using a conical radiant heater and a thermopile detector) |
| BS EN ISO 13929-2001 |
小艇.转向齿条.齿条链系统 |
(Small craft - Steering gear - Geared link systems) |
| BS EN ISO 13934-1-1999 |
织物.织物拉伸特性.用剥离法对最大作用力和在最大作用力下延伸的测定 |
(Textiles - Tensile properties of fabrics - Determination of maximum force and elongation at maximum force using the strip method) |
| BS EN ISO 13934-2-1999 |
织物.织物拉伸特性.用夹钳方法对最大作用力的测定 |
(Textiles - Tensile properties of fabrics - Determination of maximum force using the grab method) |
| BS EN ISO 13935-1-1999 |
织物.织物和成衣接缝拉伸特性.用剥离方法对接缝裂开最大拉力的测定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Determination of maximum force to seam rupture using the strip method) |
| BS EN ISO 13935-2-1999 |
织物.织物和成衣接缝拉伸特性.用夹钳方法对接缝裂开最大拉力的测定 |
(Textiles - Seam tensile properties of fabrics and made-up textile articles - Determination of maximum force to seam rupture using the grab method) |
| BS EN ISO 13936-1-2004 |
纺织物.机织物中缝合处纱线的抗滑脱性测定.固定接缝打开法 |
|
| BS EN ISO 13936-2-2004 |
纺织品.机织物中缝合处纱线的抗滑脱性测定.固定荷载法 |
|
| BS EN ISO 13937-1-2000 |
纺织材料.织物撕裂特性.用冲击摆方法测定撕裂力(埃尔门多夫) |
(Textiles - Tear properties of fabrics - Determination of tear force using ballistic pendulum method (Elmendorf)) |
| BS EN ISO 13937-2-2000 |
纺织材料.织物撕裂特性.裤形试样撕裂力的测定(单撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of trouser-shaped test specimens (single tear method)) |
| BS EN ISO 13937-3-2000 |
纺织材料.织物撕裂特性.翼形试样撕裂力的测定(单撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of wing-shaped test specimens (single tear method)) |
| BS EN ISO 13937-4-2000 |
纺织材料.织物撕裂特性.舌形试样撕裂力的测定(双撕裂法) |
(Textiles - Tear properties of fabrics - Determination of tear force of tongue-shaped test specimens (double tear test)) |
| BS EN ISO 13938-1-1999 |
织物.纤维破碎特性.破碎强度和破碎膨胀测定的液压方法 |
(Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension) |
| BS EN ISO 13938-2-1999 |
纺织品.纤维破碎特性.对破碎强度和破碎膨胀力的气动测定方法 |
(Textiles - Bursting properties of fabrics - Pneumatic method for determination of bursting strength and bursting distension) |
| BS EN ISO 13943-2000 |
防火安全.词汇 |
(Fire safety - Vocabulary) |
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制剂试验的标准化描述指南 |
|
| BS EN ISO 13969-2004 |
奶和奶制品.微生物抑制剂试验的标准化描述指南 |
|
| BS EN ISO 13982-2-2005 |
防固体颗粒用防护服.测定细粒气溶胶向服装内渗漏量的试验方法 |
|
| BS EN ISO 13995-2001 |
防护服.机械性能.材料抗穿刺性和抗撕裂性测定的试验方法 |
(Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials) |
| BS EN ISO 13997-1999 |
防护服.机械特性.抗尖锐物切割特性的测定 |
(Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com