标准号 |
中文名称 |
英文名称 |
BS EN ISO 9241-7-1998 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.反射显示的要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Requirements for display with reflections) |
BS EN ISO 9241-8-1998 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.显示色要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Requirements for displayed colours) |
BS EN ISO 9241-9-2000 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.非键盘输入装置的要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Requirements for non-keyboard input devices) |
BS EN ISO 9251-1996 |
热绝缘.材料的热传导条件和性能.词汇 |
(Thermal insulation - Heat transfer - Conditions and properties of materials - Vocabulary) |
BS EN ISO 9283-1998 |
操纵工业机器人.性能指标和有关试验方法 |
(Manipulating industrial robots - Performance criteria and related test methods) |
BS EN ISO 9288-1996 |
热绝缘.散热传递.物理的量值和定义 |
(Thermal insulation - Heat transfer by radiation - Physical quantities and definitions) |
BS EN ISO 9289-1991 |
油料种子残渣.游离残留乙烷测定 |
(Oilseed residues - Determination of free residual hexane) |
BS EN ISO 9300-1991 |
用文杜利临界流量喷嘴测定气体流量 |
(Measurement of gas flow by means of critical flow Venturi nozzles) |
BS EN ISO 9308-1-2000 |
水质.表面水和废水中大肠杆菌和大肠杆菌类细菌的检测与计数.薄膜过滤法 |
(Water quality - Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water - Membrane filtration method) |
BS EN ISO 9308-3-1999 |
水质.表面和废水中大肠杆菌和大肠杆菌型细菌的计数和检测.表面和废水中大肠杆菌的计数和检测的小型化方法( |
(Water quality - Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water - Miniaturized method (most probable number) for the detection and enumeration of E. coli) |
BS EN ISO 9311-2-2002 |
热塑性塑料管道系统用胶粘剂.剪切强度测定 |
(Adhesives for thermoplastic piping systems - Determination of shear strength) |
BS EN ISO 9311-3-2005 |
热塑性管道系统用胶粘剂.测定耐内压力性的试验方法 |
|
BS EN ISO 9312-1995 |
电阻焊设备.电极挡块的绝缘柱 |
(Resistance welding equipment - Insulated pins for use in electrode back-ups) |
BS EN ISO 9337-2-2004 |
接触镜片.后顶点屈光度的测定.盐水中浸泡的接触镜片的测量 |
|
BS EN ISO 9338-1998 |
光学和光学仪器.接触镜片.直径的测定 |
(Optics and optical instruments - Contact lenses - Determination of the diameters) |
BS EN ISO 9339-1-1998 |
光学及光学仪器.接触镜片.厚度测定.直接接触镜片 |
(Optics and optical instruments - Contact lenses - Determination of the thickness - Rigid contact lenses) |
BS EN ISO 9339-2-1998 |
光学及光学仪器.接触镜片.厚度测定.水凝胶接触镜片 |
(Optics and optical instruments - Contact lenses - Determination of the thickness - Hydrogel contact lenses) |
BS EN ISO 9340-1999 |
光学及光学仪器.接触镜片.直接接触镜片的应力测定 |
(Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses) |
BS EN ISO 9341-1998 |
光学和光学仪器.接触镜片.刚性接触镜片杂质和表面缺陷的测定 |
(Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses) |
BS EN ISO 9342-1996 |
光学及光学仪器.焦距校正用检验透镜 |
(Optics and optical instruments - Test lenses for calibration of focimeters) |
BS EN ISO 9346-1996 |
热绝缘.质量传递.物理量和定义 |
(Thermal insulation - Mass transfer - Physical quantities and definitions) |
BS EN ISO 9360-1-2000 |
麻醉和呼吸设备.使人体呼吸气体增湿的热和潮气交换(HMEs).与最小潮量250 ml一起使用的热和潮气交换 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - HMEs for use with minimum tidal volumes of 250 ml) |
BS EN ISO 9360-2-2002 |
麻醉和呼吸设备.使人体呼吸湿润气体用热和潮气交换器(HMEs).250ml最小量气管造口病人用热和潮气交换器 |
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml) |
BS EN ISO 9363-1-1999 |
光学和光学议器.接触镜片.接触镜片材料的细胞毒性的测定.琼酯覆盖试验和生长抑制试验 |
(Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Agar overlay test and growth inhibition test) |
BS EN ISO 9377-2-2000 |
水质.烃油指数的测定.用溶剂萃取法和气相色谱法 |
(Water quality - Determination of hydrocarbon oil index - Method using solvent extraction and gas chromatography) |
BS EN ISO 9391-1995 |
水质.宏无脊椎生物的深水取样.菌落定性和定量采样设备的使用导则 |
(Water quality - Sampling in deep water for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers) |
BS EN ISO 9394-1998 |
眼科光学.接触镜片和接触镜片护理产品.用兔眼睛研究目镜法测定生物相溶性 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes) |
BS EN ISO 9396-2001 |
塑料.酚醛树脂.利用自动装置测定在给定温度下的胶凝时间 |
(Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus) |
BS EN ISO 9397-1997 |
塑料.酚醛树脂.游离甲醛含量的测定 |
(Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method) |
BS EN ISO 9400-1996 |
镍基合金.抗晶间腐蚀性的测定 |
(Nickel-based alloys - Determination of resistance to intergranular corrosion) |
BS EN ISO 9408-1999 |
水质.含水介质中有机化合物最大需氧生物降解能力的评定.在封闭的呼吸器中测定需氧量 |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer) |
BS EN ISO 9409-1-1997 |
操作工业机器人.机械界面.板(A式) |
(Manipulating industrial robots - Mechanical interfaces - Plates (form A)) |
BS EN ISO 9409-1-2004 |
操作型工业机器人.机械接口.板型 |
|
BS EN ISO 9409-2-1997 |
操纵工业机器人.机械界面.轴(A式) |
(Manipulating industrial robots - Mechanical interfaces - Shafts (form A)) |
BS EN ISO 9409-2-2004 |
操作型工业机器人.机械接口.轴 |
|
BS EN ISO 9431-1999 |
建筑图纸.图和正文的间隔,图纸上的标题栏 |
(Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets) |
BS EN ISO 9439-2001 |
水质.水介质中有机化合物临界需氧生物降解性的评估.二氧化碳评估试验 |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test) |
BS EN ISO 945-1994 |
抵石墨显微结构的表示方法 |
(Cast iron - Designation of microstructure of graphite) |
BS EN ISO 9454-2-2001 |
软钎焊剂.分类和要求.性能要求 |
(Soft soldering fluxes - Classification and requirements - Performance requirements) |
BS EN ISO 9455-10-2001 |
软钎焊剂的试验方法.助熔剂功效试验.焊料展开法 |
(Soft soldering fluxes - Test methods - Flux efficacy test, solder spread method) |
BS EN ISO 9455-12-1994 |
软钎焊剂.试验方法.钢管耐腐蚀试验 |
(Soft soldering fluxes - Test methods - Steel tube corrosion test) |
BS EN ISO 9455-13-2000 |
软钎焊助熔剂.试验方法.助熔剂飞溅量的测定 |
(Soft soldering fluxes - Test methods - Determination of flux spattering) |
BS EN ISO 9455-15-2000 |
软钎焊剂.试验方法.铜腐蚀试验 |
(Soft soldering fluxes - Test methods - Copper corrosion test) |
BS EN ISO 9455-2-1996 |
软钎焊剂.试验方法.第2部分:不挥发物的测定.沸点计法 |
(Soft soldering fluxes - Test methods - Determination of non-volatile matter, ebulliometric method) |
BS EN ISO 9455-3-1995 |
软钎焊剂.试验方法.酸值测定.电势法和目测滴定法 |
(Soft soldering fluxes - Test methods - Determination of acid value, potentiometric and visual titration methods) |
BS EN ISO 9455-6-1997 |
软钎焊剂.试验方法.第6部分:卤化物(不包括氟化物)的含量测定 |
(Soft soldering fluxes - Test methods - Determination and detection of halide (excluding fluoride) content) |
BS EN ISO 9455-9-1996 |
软钎焊剂.试验方法.第9部分:氨含量测定 |
(Soft soldering fluxes - Test methods - Determination of ammonia content) |
BS EN ISO 9456-1992 |
光学和光学仪器.眼科光学.眼镜架标志 |
(Optics and optical instruments - Opthalmic optics - Marking of spectacle frames) |
BS EN ISO 9488-2000 |
太阳能.词汇 |
(Solar energy - Vocabulary) |
BS EN ISO 9509-1990 |
水质.通过化学药品和污水对活性污泥中微生物硝酸化抑制作用的鉴定方法 |
(Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water) |
BS EN ISO 9513-2002 |
金属材料.单轴向试验用引伸计的校准 |
Metallic materials - Calibration of extensometers used in uniaxial testing |
BS EN ISO 9514-1993 |
色漆和清漆.液态适用期测定.样品的制备和状态调节以及试验指南 |
Paints and varnishes - Determination of the pot-life of liquid systems - Preparation and conditioning of samples and guidelines for testing |
BS EN ISO 9514-2005 |
色漆和清漆.多组分涂覆系统适用期测定.样品的制备和处理以及试验指南 |
|
BS EN ISO 9554-2005 |
纤维绳索.一般规范 |
|
BS EN ISO 9556-2001 |
钢铁.含碳总量的测定.感应电炉燃烧红外线吸收法 |
(Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace) |
BS EN ISO 9562-2004 |
水质.可吸附卤素(AOX)的测定 |
|
BS EN ISO 9606-2-2004 |
焊工的认可试验.熔焊.铝和铝合金 |
|
BS EN ISO 9606-2-2004 |
焊工的认可试验.熔焊.铝和铝合金 |
|
BS EN ISO 9606-3-1999 |
焊工的认可试验.熔焊.铜及铜合金 |
(Approval testing of welders - Fusion welding - Copper and copper alloys) |
BS EN ISO 9606-4-1999 |
焊工的认可试验.熔焊.镍及镍合金 |
(Approval testing of welders - Fusion welding - Nickel and nickel alloys) |
BS EN ISO 9606-5-2000 |
焊工的认可试验.熔焊.钛和钛合金.锆和锆合金 |
Approval testing of welders - Fusion welding - Titanium and titanium alloys, zirconium and zirconium alloys |
BS EN ISO 9614-1-1993 |
声学.利用声音强度测定噪声源功率级.第1部分:离散点测量 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement at discrete points) |
BS EN ISO 9614-2-1997 |
声学.利用声强度对噪声源声功率级别的测定.使用扫描测量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement by scanning |
BS EN ISO 9614-3-2002 |
声学.利用声强度对噪声源声功率级别的测定.使用扫描精确测量法 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Precision method for measurement by scanning) |
BS EN ISO 9626-1991 |
医疗设备生产用不锈钢针管 |
(Stainless steel needle tubing for the manufacture of medical devices) |
BS EN ISO 9653-2000 |
粘合剂.胶粘剪切强度的试验方法 |
(Adhesives - Test method for shear strength of adhesive bonds (ISO 9653:1998)) |
BS EN ISO 9664-1995 |
粘合剂.拉伸剪切结构胶粘剂疲劳性能的试验方法 |
(Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear) |
BS EN ISO 9665-2000 |
粘合剂.动物胶.取样和试验方法 |
(Adhesives - Animal glues - Methods of sampling and testing (ISO 9665:1998)) |
BS EN ISO 9680-1994 |
牙科手术用照明灯具规范 |
(Specification for dental operating light) |
BS EN ISO 9687-1993 |
牙科设备.图形符号 |
(Dental equipment - Graphical symbols) |
BS EN ISO 9692-2-1998 |
焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊 |
(Welding and allied processes - Joint preparation - Submerged arc welding of steels) |
BS EN ISO 9692-3-2001 |
焊接和相关工艺.接头的准备.铝及其合金的金属极惰性气体保护焊和钨极惰性气体保护焊 |
(Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys) |
BS EN ISO 9692-4-2003 |
焊接和相关工艺.接头制备.包钢 |
(Welding and allied processes - Joint preparation - Clad steels) |
BS EN ISO 9693-2000 |
金属-陶瓷牙科修复系统 |
(Metal-ceramic dental restorative systems) |
BS EN ISO 9702-1997 |
塑料.环氧氨硬化剂.对第1、2、3 氨组含氮量的测定 |
(Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content) |
BS EN ISO 9703-3-1999 |
麻醉和呼吸护理报警信号.警报应用指南 |
(Anaesthetic and respiratory care alarm signals - Guidance on application of alarms) |
BS EN ISO 9707-1991 |
信息和文本资料.图书、报纸、期刊和电子出版物的分布和生产统计 |
(Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications) |
BS EN ISO 9713-2004 |
神经外科植入物.颅内动脉瘤自闭合夹 |
|
BS EN ISO 9771-1997 |
塑料.酚醛树脂.测定可溶酚醛树脂在酸性条件下的反应性 |
(Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions) |
BS EN ISO 9773-1999 |
塑料.薄软试样垂直与小火焰源接触燃烧性能的测定 |
(Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source) |
BS EN ISO 9785-2002 |
船舶和造船技术.可行驶内燃机机动车的货舱.总气流需求的理论计算 |
(Ship and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required) |
BS EN ISO 9787-1999 |
操纵工业机器人.坐标系和运动专门用语 |
(Manipulating industrial robots - Coordinate systems and motion nomenclatures) |
BS EN ISO 9832-2003 |
动植物脂肪和油.工业己烷残留量的测定 |
(Animal and vegetable fats and oils - Determination of residual technical hexane content) |
BS EN ISO 9856-2004 |
输送带.弹性和固定延伸率的测定和弹性模量的计算 |
|
BS EN ISO 9856-2004 |
输送带.弹性模数的测定 |
|
BS EN ISO 9862-2005 |
土工合成织物.抽样和试样制备 |
|
BS EN ISO 9863-1-2005 |
土工合成织物.特定压力下厚度的测定.单层 |
|
BS EN ISO 9863-2-1996 |
土工织物和相关产品.特定压力下厚度的测定.多层制品的单层厚度测定程序 |
(Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Procedure for determination of thickness of single layers of multilayer products) |
BS EN ISO 9864-2005 |
土工合成织物.土工织物和相关产品每单位面积质量测定的试验方法 |
|
BS EN ISO 9873-2000 |
手持式牙科器械.可重复使用的镜子和手柄 |
(Dental hand instruments - Reusable mirrors and handles) |
BS EN ISO 9875-2002 |
船舶和造船技术.船用回声探测设备 |
(Ships and marine technology - Marine echo-sounding equipment) |
BS EN ISO 9876-1999 |
船舶和航海技术.气象图用航海传真接收机 |
(Ships and marine technology - Marine facsimile receivers for meteorological charts) |
BS EN ISO 9886-2001 |
用生理测量法评定热应变 |
(Evaluation of thermal strain by physiological measurements) |
BS EN ISO 9886-2004 |
人类工程学.热疲劳的生理学测量评价 |
|
BS EN ISO 9887-1995 |
水质.含水介质中有机物化合物需氧生物降解性的评定.半连续激活污泥法(SCAS) |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS)) |
BS EN ISO 9888-1999 |
水质.含水介质中有机化合物最大需氧生物降解能力的评定.静态试验(Zahn-Wellens法) |
(Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method)) |
BS EN ISO 9902-1-2001 |
纺织机械.噪声试验规程.通用要求 |
(Textile machinery - Noise test code - Common requirements) |
BS EN ISO 9902-2-2001 |
纺织机械.噪声试验规程.纺纱准备和纺纱机械 |
(Textile machinery - Noise test code - Spinning preparatory and spinning machinery) |
BS EN ISO 9902-3-2001 |
纺织机械.噪声试验规程.非纺织机械 |
(Textile machinery - Noise test code - Nonwoven machines) |
BS EN ISO 9902-4-2001 |
纺织机械.噪声试验规程.纱的加工、缆索和绳制造用机械 |
(Textile machinery - Noise test code - Yarn processing, cordage and rope manufacturing machines) |
BS EN ISO 9902-5-2001 |
纺织机械.噪声试验规程.织造和针织用机械 |
(Textile machinery - Noise test code - Weaving and knitting preparatory machinery) |
BS EN ISO 9902-6-2001 |
纺织机械.噪声试验规程.制布机械 |
(Textile machinery - Noise test code - Fabric manufacturing machines) |
BS EN ISO 9902-7-2001 |
纺织机械.噪声试验规程.染色和精整机械 |
(Textile machinery - Noise test code - Dyeing and finishing machines) |
BS EN ISO 9905-1994 |
离心泵技术规范.I类 |
(Technical specifications for centrifugal pumps - Class I) |
BS EN ISO 9906-2000 |
回转动力泵.液压性能验收试验.1和2级 |
(Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2) |
BS EN ISO 9908-1994 |
离心泵技术规范.III类 |
(Technical specifications for centrifugal pumps - Class III) |
BS EN ISO 9913-1-1997 |
光学和光学仪器.隐形镜片.第1部分:用FATT法对氧气渗透性和可透性的测定 |
(Optics and optical instruments - Contact lenses - Determination of oxygen permeability and transmissibility by the FATT method) |
BS EN ISO 9913-2-2000 |
光学和光学仪器.接触镜片.用库仑法测定氧渗透性和传输性 |
(Optics and optical instruments - Contact lenses - Determination of oxygen permeability and transmissibility by the coulometric method) |
BS EN ISO 9914-1997 |
光学及光学仪器.接触镜片.接触镜片材料折射指数的测定 |
(Optics and optical instruments - Contact lenses - Determination of refractive index of contact lens materials) |
BS EN ISO 9917-1-2003 |
牙科用水基粘结剂.粉末/液态酸基粘结剂 |
(Dental water-based cements - Powder/liquid acid-base cements) |
BS EN ISO 9917-2-2000 |
牙科用水基粘结剂.光敏粘结剂 |
(Dental water-based cements - Light-activated cements) |
BS EN ISO 9919-2005 |
医用电气设备.医用脉动式血氧计的基本安全和性能的特殊要求 |
|
BS EN ISO 9921-2003 |
人类工效学.语音通讯的评估 |
(Ergonomics - Assessment of speech communication) |
BS EN ISO 9934-1-2001 |
无损检验.磁粉检验.一般原理 |
(Non-destructive testing - Magnetic particle testing - General principles) |
BS EN ISO 9934-2-2002 |
无损检验.磁粉检验.碳伤媒介 |
(Non-destructive testing - Magnetic particle testing - Detection media) |
BS EN ISO 9934-3-2002 |
无损检验.磁粉检验.设备 |
(Non-destructive testing - Magnetic particle testing - Equipment) |
BS EN ISO 9944-1995 |
塑料.酚醛树脂.树脂萃取物电导率的测定 |
(Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts) |
BS EN ISO 9946-1999 |
工业操纵机器人.特性表示方法 |
(Manipulating industrial robots - Presentation of characteristics) |
BS EN ISO 9956-10-1997 |
金属材料焊接程序的批准和规范.电子束焊接程序规范 |
(Specification and approval of welding procedures for metallic materials - Welding procedure specification for electron beam welding) |
BS EN ISO 9956-11-1997 |
金属材料焊接程序的批准和规范.激光束焊接程序规范 |
(Specification and approval of welding procedures for metallic materials - Welding procedure specification for laser beam welding) |