标准号 |
中文名称 |
英文名称 |
EN 10083-3-1995 |
淬火钢和回火钢第3部分:硼钢交货技术条件 |
Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels |
EN 10084-1998 |
表面硬化钢交货技术条件 |
Case hardening steels - Technical delivery conditions |
EN 10085-2001 |
氮化钢交货技术条件 |
Nitriding steels - Technical delivery conditions |
EN 10087-1998 |
快削钢半成品热轧棍和棒交货技术条件 |
Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
EN 10088-1-1995 |
不锈钢第1部分:不锈钢目录 |
Stainless steels - Part 1: List of stainless steels |
EN 10088-2-1995 |
不锈钢第2部分:一般用及结构用薄板/板材和带材的交货技术条件 |
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes |
EN 10088-3-1995 |
不锈钢第3部分:一般用途的半成品、钢棒、线材和型钢的交货技术条件 |
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes |
EN 10089-2002 |
淬火和回火热轧弹簧钢交货技术条件 |
Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
EN 10090-1998 |
内燃机阀门用钢和合金 |
Valve steels and alloys for internal combustion engines |
EN 10092-2-2003 |
热轧弹簧钢扁棒第2部分:有肋和凹槽簧片 形状和尺寸公差及尺寸 |
Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves; Dimensions and tolerances on shape and dimensions |
EN 10095-1999 |
耐热钢和镍合金 |
Heat resisting steels and nickel alloys |
EN 101-1991 |
陶瓷瓷砖 表面莫式划伤硬度的测定 |
Ceramic tiles - Determination of scratch hardness of surface according to Mohs |
EN 1010-3-2002 |
机械安全 印刷和纸张转换机的设计和结构的安全要求 第3部分:切割机 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
EN 1010-4-2004 |
机械安全.印刷和纸加工机械的设计和施工的安全要求.第4部分:装订机、纸加工机和修整机 |
|
EN 10106-1995 |
完全加工好的交货的冷轧无定向电工钢薄板及带材 |
Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state |
EN 10107-1995 |
完全加工好的交货的晶粒定向电工钢薄板及带材 |
Grain-oriented electrical steel sheet and strip delivered in the fully processed state |
EN 10108-2004 |
冷镦和冷挤压圆钢棒.尺寸和公差 |
|
EN 1011-2-2001 |
焊接 金属材料焊接的推荐规范 第2部分:铁素体钢的电弧焊接 |
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels |
EN 1011-3-2000 |
焊接 金属材料焊接的推荐规范 第3部分:不锈钢的电弧焊接 |
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels |
EN 1011-4-2000 |
焊接 金属材料焊接的推荐规范 第4部分:铝和铝合金的电弧焊接 |
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
EN 1011-5-2003 |
焊接 金属材料焊接的推荐规范 第5部分:复层钢焊接 |
Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
EN 1011-7-2004 |
焊接.焊接金属材料的建议.第7部分:电子束焊接 |
|
EN 1011-8-2004 |
焊接.金属材料的焊接建议.第8部分:铸铁的焊接 |
|
EN 10111-1998 |
冷成型用连续热轧低碳钢薄板及带材交货技术条件 |
Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
EN 10113-1-1993 |
可焊细晶粒结构钢的热轧制品第1部分:一般交货条件 |
Hot-rolled products in weldable fine grain structural steels; Part 1: General delivery conditions |
EN 10113-2-1993 |
可焊细晶粒结构钢的热轧制品第2部分:正火轧制钢的交货条件 |
Hot-rolled products in weldable fine grain structural steels- Part 2: Delivery conditions for normalized rolled steels |
EN 10113-3-1993 |
可焊细晶粒结构钢的热轧制品第3部分:热轧钢的交货条件 |
Hot-rolled products in weldable fine grain structural steels-Part 3: Delivery conditions for thermomechanically rolled steels |
EN 1012-1-1996 |
压缩机和真空泵 安全要求 第1部分:压缩机 |
Compressors and vacuum pumps - Safety requirements - Part 1: Compressors |
EN 1012-2-1996 |
压缩机和真空泵 安全要求 第2部分:真空泵 |
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
EN 10120-1996 |
焊接气瓶用钢薄板及带材 |
Steel sheet and strip for welded gas cylinders |
EN 10126-1995 |
半成品交货的冷轧非合金钢电工钢薄板和钢带 |
Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state |
EN 1013-1-1997 |
单层顶盖用透光齿形塑料板 第1部分:一般要求和试验方法 |
Light transmitting profiled plastic sheeting for single skin roofing - Part 1: General requirements and test methods |
EN 1013-2-1998 |
单层顶盖用透光齿形塑料板 第2部分:玻璃纤维增强的聚脂树脂薄板的特殊要求和试验方法 |
Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) |
EN 1013-3-1997 |
单层顶盖用透光齿形塑料板 第3部分:聚氯乙烯板的特殊要求和试验方法 |
Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC) |
EN 1013-4-2000 |
单层顶盖用透光齿形塑料板 第4部分:聚碳酸酯板的特殊要求、试验方法和性能 |
Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets |
EN 1013-5-2000 |
单层顶盖用透光齿形塑料板 第5部分:聚甲基丙烯酸甲酯板的特殊要求、试验方法和性能 |
Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets |
EN 10131-1991 |
冷成型用冷轧未涂覆低碳高屈服强度钢扁材产品尺寸和形状公差 |
Cold rolled uncoated low carbon high yield strength steel flat products for cold forming; tolerances on dimensions and shape |
EN 10132-1-2000 |
热处理用冷轧窄钢带交货技术条件第1部分:总则 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
EN 10132-2-2000 |
热处理用冷轧窄钢带交货技术条件第2部分:表面硬化钢 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels |
EN 10132-3-2000 |
热处理用冷轧窄钢带交货技术条件第3部分:淬火和回火钢 |
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering |
EN 10136-1989 |
黑色金属材料的化学分析钢铁中的镍含量的测定火焰原子吸收光谱测定法 |
Chemical analysis of ferrous materials; determination of nickel in steels and irons; flame atomic absorption spectrometric method |
EN 10137-1-1995 |
调质或沉淀硬化状态下高屈服强度结构钢制薄板和宽扁钢第1部分:一般交货条件 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions |
EN 10137-2-1995 |
调质或沉淀硬化状态下高屈服强度结构钢制薄板和宽扁钢第2部分:调质钢的交换条件 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels |
EN 10137-3-1995 |
调质或沉淀硬化状态下高屈服强度结构钢制薄板和宽扁钢第3部分:沉淀硬化钢的交货条件 |
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels |
EN 10139-1997 |
冷成型用冷轧未涂覆软钢窄带材交货技术条件 |
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions |
EN 1014-1-1995 |
木材防腐剂 木榴油和木榴油木材 采样和分析方法 第1部分:木榴油采样程序 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote |
EN 1014-2-1995 |
木材防腐剂 木榴油和木榴油木材 采样和分析方法 第2部分:后续分析用木榴油木材中木榴油采样程序 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis |
EN 1014-3-1997 |
木材防腐剂 木榴油和木榴油木材 采样和分析方法 第3部分:木榴油中苯并芘含量的测定 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote |
EN 1014-4-1995 |
木材防腐剂 木榴油和木榴油木材 采样和分析方法 第4部分:木榴油中水榨出苯酚含量的测定 |
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote |
EN 10140-1996 |
冷轧窄钢带尺寸和形状公差 |
Cold rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10142-2000 |
冷成型用连续热浸镀锌低碳钢薄板和带材交货技术条件 |
Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions |
EN 10143-1993 |
连续热浸镀金属钢薄板和带材尺寸和形状公差 |
Continuously hot-dip metal coated steel sheet and strip-Tolerances on dimensions and shape |
EN 10147-2000 |
连续热浸镀锌钢薄板和带材交货技术条件 |
Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions |
EN 10149-1-1995 |
冷成型用高屈服强度钢制热轧扁平产品第1部分:一般交货条件 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions |
EN 10149-2-1995 |
冷成型用高屈服强度钢制热轧扁平产品第2部分:热轧钢的交货条件 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels |
EN 10149-3-1995 |
冷成型用高屈服强度钢制热轧扁平产品第3部分:正火钢或正火轧制钢交货条件 |
Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels |
EN 1015-1-1998 |
圬工用灰浆试验方法 第1部分:颗粒尺寸分布的测定(筛分析法) |
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis) |
EN 1015-10-1999 |
圬工用灰浆试验方法 第10部分:硬化灰浆的干堆积密度的测定 |
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar |
EN 1015-11-1999 |
圬工用灰浆试验方法 第11部分:硬化灰浆弯曲和抗压强度的测定 |
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar |
EN 1015-12-2000 |
圬工用灰浆试验方法 第12部分:底层硬化粉刷和粘贴灰浆粘贴强度的测定 |
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
EN 1015-17-2000 |
圬工用灰浆试验方法 第17部分:新鲜灰浆可溶水氯化物含量的测定 |
Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars |
EN 1015-17-2004 |
圬工用灰浆的试验方法.第17部分:新凝灰浆中水溶性氯化物含量的测定 |
|
EN 1015-18-2002 |
圬工用灰浆试验方法 第18部分:由于毛细作用硬化灰浆水吸收系数的测定 |
Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar |
EN 1015-19-1998 |
圬工用灰浆试验方法 第19部分:硬化粉刷和粘贴灰浆水蒸汽渗透性的测定 |
Methods of test for mortar for masonry - Part 19: Determination for water vapour permeability of hardened rendering and plastering mortars |
EN 1015-19-2004 |
砖石灰浆试验方法.第19部分:硬化初涂灰浆和抹灰灰浆水蒸气渗透性的测定 |
|
EN 1015-2-1998 |
圬工用灰浆试验方法 第2部分:灰浆集块取样和试验灰浆制备 |
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars |
EN 1015-21-2002 |
圬工用灰浆试验方法 第21部分:带底色单层粉刷灰浆兼容性的测定 |
Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with subtrates |
EN 1015-3-1999 |
圬工用灰浆试验方法 第3部分:新鲜灰浆浓度的测定(流量表法) |
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) |
EN 1015-3-2004 |
圬工灰浆的试验方法.第3部分:根据流量表测定新凝砂浆的稠度 |
|
EN 1015-4-1998 |
圬工用灰浆试验方法 第4部分:新鲜灰浆浓度的测定(倾倒渗透法) |
Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) |
EN 1015-6-1998 |
圬工用灰浆试验方法 第6部分:新鲜灰浆堆积密度的测定 |
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar |
EN 1015-7-1998 |
圬工用灰浆试验方法 第7部分:新鲜灰浆空气含量的测定 |
Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar |
EN 1015-9-1999 |
圬工用灰浆试验方法 第9部分:新鲜灰浆使用寿命和调整时间的测定 |
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar |
EN 10151-2002 |
弹簧用不锈钢钢带交货技术条件 |
Stainless steel strip for springs - Technical delivery conditions |
EN 10152-2003 |
冷加工电镀锌冷轧扁钢制品交货技术条件 |
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
EN 10154-2002 |
连续热浸镀铝硅钢薄板和带材交货技术条件 |
Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions |
EN 10155-1993 |
改进的抗大气腐蚀的结构钢交货技术条件 |
Structural steels with improved atmospheric corrosion resistance-Ttechnical delivery conditions |
EN 10160-1999 |
厚度等于或大于6mm扁钢制品的超声检验(反射法) |
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
EN 10162-2003 |
冷轧钢型材交货技术条件尺寸和横截面公差 |
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
EN 10163-1-1991 |
热轧钢板材、宽扁材和型材表面条件的交货条件第1部分:一般要求 |
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections-Ppart 1: General requirements |
EN 10163-2-1991 |
热轧钢板材、宽扁材和型材表面条件的交货条件第2部分:板材和宽扁钢 |
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections-Part 2: Plate and wide flats |
EN 10163-3-1991 |
热轧钢板材、宽扁材和型材表面条件的交货条件第3部分:型钢 |
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: sections |
EN 10164-1993 |
改进产品表面垂直变形特性的钢产品交货技术条件 |
Steel products with improved deformation properties perpendicular to the surface of the product-Technical delivery conditions |
EN 10165-1995 |
半成品交货的冷轧电工合金钢制薄板和带材 |
Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state |
EN 10168-2004 |
钢产品.检验文件.内容和说明的目录表 |
|
EN 10169-1-1996 |
连续有机涂层(螺旋状涂层)的扁钢制品第1部分:一般信息(定义、材料、公差、试验方法) |
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
EN 10169-3-2003 |
连续有机涂层(螺旋状涂层)扁钢制品第3部分:用于建筑物内部的产品 |
Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
EN 1017-1998 |
人类用水处理用的化学制品 半烧的白云石 |
Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite |
EN 10177-1989 |
黑色金属材料的化学分析钢铁中钙的测定火焰原子吸收光谱法 |
Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method |
EN 10178-1989 |
黑色金属材料的化学分析钢中铌的测定分光光度法 |
Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method |
EN 10179-1989 |
黑色金属材料的化学分析钢中氮(微量)的测定分光光度法 |
Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method |
EN 1018-1998 |
人类用水处理用的化学制品 碳酸钙 |
Chemicals used for treatment of water intended for human consumption - Calcium carbonate |
EN 10181-1989 |
黑色金属材料的化学分析钢中铅的测定火焰原子吸收光谱法 |
Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method |
EN 10184-1989 |
黑色金属材料化学分析钢铁中磷的测定分光光度法 |
Chemical analysis of ferrous materials; determination of phosphorus in steels and irons; spectrophotometric method |
EN 10188-1989 |
黑色金属材料的化学分析钢铁中铬的测定火焰原子吸收光谱法 |
Chemical analysis of ferrous materials; determination of chromium in steels and irons; flame atomic absorption spectrometric method |
EN 1019-1995 |
人类用水处理用的化学制品 二氧化硫 |
Chemicals used for treatment of water intended for human consumption - Sulfur dioxide |
EN 10202-2001 |
冷轧镀锡钢制品电解镀锡钢制品和电解镀铬/镀氧化铬钢制品 |
Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel |
EN 10203-1991 |
冷轧电解镀锡钢制品 |
Cold reduced electrolytic tinplate |
EN 10204-1991 |
金属制品检查文件型式 |
Metallic products; types of inspection documents |
EN 10204-2004 |
冶金产品.检验文件的类型 |
|
EN 10205-1991 |
生产镀锡薄钢板或电解镀铬/镀氧化铬钢板用冷轧黑色卷材 |
Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel |
EN 10208-1-1997 |
易燃流体管道用钢管交货技术条件第1部分:符合A类要求的管材 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
EN 10209-1996 |
搪瓷用冷轧低碳钢板制品交货技术条件 |
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
EN 1021-1-1993 |
家具 装璜家具易燃性的评估 第1部分:火源 燃着的香烟 |
Furniture; Assessment of the ignitability of upholstered furniture; part 1: ignition source: smouldering cigarette (ISO 8191-1:1987, modified) |
EN 1021-2-1993 |
家具 装潢家具易燃性的评估 第2部分:火源 火柴的火焰当量 |
Furniture; assessment of the ignitability of upholstered furniture; part 2: ignition source: match flame equivalent (ISO 8191-2:1988, modified) |
EN 10210-1-1994 |
非合金及细晶粒结构钢的热轧结构空心型材交货技术条件 |
Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements |
EN 10210-2-1997 |
非合金及细晶粒结构钢的热轧结构空心型材第2部分:公差、尺寸和截面特性 |
Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties |
EN 10211-1995 |
黑色金属材料的化学分析钢铁中钛含量测定火焰原子吸收光谱测定法 |
Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method |
EN 10212-1995 |
黑色金属材料的化学分析钢铁中砷含量的测定分光光度法 |
Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method |
EN 10213-1-1995 |
压力用途的钢铸件的交货技术条件第1部分:总则 |
Technical delivery conditions for steel castings for pressure purposes - Part 1: General |
EN 10213-2-1995 |
压力用途的钢铸件的交货技术条件第2部分:环境温度和高温下使用的钢等级 |
Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures |
EN 10213-3-1995 |
压力用途的钢铸件的交货技术条件第3部分:低温下使用的钢等级 |
Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures |
EN 10213-4-1995 |
压力用途的钢铸件的交货技术条件第4部分:奥氏体和奥氏体-铁素体钢等级 |
Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades |
EN 10214-1995 |
连续热浸镀锌铝薄钢板和钢带交货技术条件 |
Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions |
EN 10215-1995 |
连续热浸镀铝锌薄钢板和钢带交货技术条件 |
Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions |
EN 10216-1-2002 |
压力用途的无缝钢管交货技术条件第1部分:有规定室温特性的非合金钢管 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-1/prA1 (2003-07). |
EN 10216-1-2004 |
压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管 |
|
EN 10216-2-2002 |
压力用途的无缝钢管交货技术条件第2部分:有规定高温特性的非合金及合金钢管 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (2003-07). |
EN 10216-2-2004 |
压力载荷用无缝钢管.交货技术条件.第2部分:带特定高温性能的非合金和合金钢管 |
|
EN 10216-3-2002 |
压力用途的无缝钢管交货技术条件第3部分:合金细晶粒钢管 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Note: To be amended by EN 10216-3/prA1 (2003-07). |