标准号 |
中文名称 |
英文名称 |
EN 10216-3-2004 |
压力载荷用无缝钢管.交货技术条件.第3部分:合金细粒钢管 |
|
EN 10216-4-2002 |
压力用途的无缝钢管交货技术条件第4部分:有规定低温特性的非合金及合金钢管 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (2003-07). |
EN 10216-4-2004 |
压力载荷用无缝钢管.交货技术条件.第4部分:带特定低温性能的非合金和合金钢管 |
|
EN 10216-5-2004 |
压力用途无缝钢管.交货技术条件.第5部分:不锈钢管 |
|
EN 10217-1-2002 |
压力用途的焊接钢管交货技术条件第1部分:有规定室温特性的非合金钢管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
EN 10217-2-2002 |
压力用途的焊接钢管交货技术条件第2部分:有规定高温特性的电焊非合金及合金钢管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
EN 10217-3-2002 |
压力用途的焊接钢管交货技术条件第3部分:合金细晶粒钢管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
EN 10217-4-2002 |
压力用途的焊接钢管交货技术条件第4部分:有规定低温特性的电焊非合金钢管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
EN 10217-5-2002 |
压力用途的焊接钢管交货技术条件第5部分:有规定高温特性的埋弧焊非合金及合金钢管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
EN 10217-6-2002 |
压力用途的焊接钢管交货技术条件第6部分:有规定低温特性的埋弧焊非合金钢管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
EN 10218-1-1994 |
钢丝和线材制品总则第1部分:试验方法 |
Steel wire and wire products-General-Part 1: Test methods |
EN 10218-2-1996 |
钢丝和线材制品总则第2部分:钢丝尺寸和公差 |
Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
EN 10219-1-1997 |
冷成型细晶粒钢和非合金钢的焊接结构空心型材第1部分:交货技术要求 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements |
EN 10219-2-1997 |
冷成型细晶粒钢和非合金钢的焊接结构空心型材第2部分:公差、尺寸和截面特性 |
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
EN 1022-1996 |
居室家具 坐椅 稳定性的测试 |
Domestic furniture - Seating - Determination of stability |
EN 10220-2002 |
无缝和焊接钢管单位长度的尺寸和质量 |
Seamless and welded steel tubes - Dimensions and masses per unit length |
EN 10221-1995 |
热轧棒材的表面质量分类交货技术条件 |
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
EN 10222-3-1998 |
压力用途的钢锻件第3部分:有规定低温特性的镍钢 |
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
EN 10223-1-1997 |
栅栏用钢丝和钢丝制品第1部分:镀锌和镀锌合金的有刺钢丝 |
Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire |
EN 10223-2-1997 |
栅栏用钢丝和钢丝制品第2部分:农业、隔离和栅栏用六角型钢丝网 |
Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation, and fencing purposes |
EN 10223-2-2004 |
栅栏用钢丝和钢丝制品.第2部分:农用隔离和栅栏用六角形钢丝网 |
|
EN 10223-3-1997 |
栅栏用钢丝和钢丝制品工程用六角型钢丝网 |
Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes |
EN 10223-4-1998 |
栅栏用钢丝和钢丝制品钢丝焊接网式栅栏 |
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing |
EN 10223-5-1998 |
栅栏用钢丝和钢丝制品钢丝编织绞接和打结网式栅栏 |
Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing |
EN 10223-6-1998 |
栅栏用钢丝和钢丝制品钢丝网栅栏的测定 |
Steel wire and wire products for fences - Part 6: Steel wire chain link fencing |
EN 10223-7-2002 |
栅栏用钢丝和钢丝制品第7部分:栅栏用钢丝焊接板 |
Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing |
EN 10224-2002 |
输送液体(包括人类生活用水)用的非合金钢管和管件交货技术条件 |
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions |
EN 10225-2001 |
固定海上结构用的可焊接结构钢交货技术条件 |
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
EN 10226-1-2004 |
有压力紧固连接件的管道螺纹.第1部分:锥形外螺纹和平行内螺纹.尺寸、公差和名称与符号 |
|
EN 10228-1-1999 |
钢锻件的无损检测第1部分:磁粉检查 |
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
EN 10228-2-1998 |
钢锻件的无损检测第2部分:渗透检验 |
Non-destructive testing of steel forgings - Part 2: Penetrant testing |
EN 10228-3-1998 |
钢锻件的无损检测第3部分:铁素体或马氏体钢锻件的超声检验 |
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
EN 10228-4-1999 |
钢锻件的无损检测第4部分:奥氏体和奥氏体-铁素体不锈钢锻件的超声检验 |
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
EN 10229-1998 |
钢产品耐氢致破裂(HIC)的评估 |
Evaluation of resistance of steel products to hydrogen induced cracking (HIC) |
EN 1023-1-1996 |
办公家具 屏风 第1部分:尺寸 |
Office furniture - Screens - Part 1: Dimensions |
EN 1023-2-2000 |
办公家具 屏风 第2部分:机械安全要求 |
Office furniture - Screens - Part 2: Mechanical safety requirements |
EN 1023-3-2000 |
办公家具 屏风 第3部分:试验方法 |
Office furniture - Screens - Part 3: Test methods |
EN 10230-1-1999 |
钢丝钉第1部分:一般应用的松动钉 |
Steel wire nails - Part 1: Loose nails for general applications |
EN 10232-1993 |
金属材料整截面管材弯曲试验 |
Metallic materials; tube (in full section); bend test |
EN 10233-1993 |
金属材料管材压扁试验 |
Metallic materials; tube; flattening test |
EN 10234-1993 |
金属材料管材管流延伸试验 |
Metallic materials; tube; drift expanding test |
EN 10235-1993 |
金属材料管材法兰试验 |
Metallic materials; tube; flanging test |
EN 10236-1993 |
金属材料管材环形扩管试验 |
Metallic materials; tube; ring expanding test |
EN 10237-1993 |
金属材料管材环形管拉伸试验 |
Metallic materials; tube; ring tensile test |
EN 10238-1996 |
自动喷砂清理和自动涂底漆结构钢制品 |
Automatically blast-cleaned and automatically prefabrication primed structural steel products |
EN 1024-1997 |
间断敷设用粘土制屋面瓦 几何性能测定 |
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics |
EN 10240-1997 |
钢管内或外保护覆层用于自动车间的热浸电动覆膜规范 |
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
EN 10241-2000 |
钢制螺纹管配件 |
Steel threaded pipe fittings |
EN 10243-1-1999 |
钢模锻件尺寸公差第1部分:落锤或立式压力锻件 |
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings |
EN 10243-2-1999 |
钢模锻件尺寸公差第2部分:卧式锻压机制的镦锻件 |
Steel die forgings - Tolerances on dimensions - Part 2: Upset forging made on horizontal forging machines |
EN 10244-1-2001 |
钢丝和钢丝制品钢丝上的非黑色金属外层第1部分:一般原则 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles |
EN 10244-2-2001 |
钢丝和钢丝制品钢丝上的非黑色金属外层第2部分:锌或锌合金镀层 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
EN 10244-3-2001 |
钢丝和钢丝制品钢丝上的非黑色金属外层第3部分:铝镀层 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings |
EN 10244-4-2001 |
钢丝和钢丝制品钢丝上的非黑色金属外层第4部分:锡镀层 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings |
EN 10244-5-2001 |
钢丝和钢丝制品钢丝上的非黑色金属外层第5部分:镍镀层 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings |
EN 10244-6-2001 |
钢丝和钢丝制品钢丝上的非黑色金属外层第6部分:铜、青铜或黄铜镀层 |
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings |
EN 10245-1-2001 |
钢丝和钢丝制品钢丝上的有机涂层第1部分:一般原则 |
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
EN 10245-2-2001 |
钢丝和钢丝制品钢丝上的有机涂层第2部分:涂PVC线材 |
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
EN 10245-3-2001 |
钢丝和钢丝制品钢丝上的有机涂层第3部分:涂PE线材 |
Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
EN 10245-4-2003 |
钢丝和钢丝制品钢丝上的有机涂层第4部分:涂聚脂线材 |
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
EN 10246-1-1996 |
钢管的无损检测第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 |
Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
EN 10246-10-2000 |
钢管的无损检测第10部分:钢管缺陷探测用的自动熔弧焊钢管焊缝的射线检验 |
Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
EN 10246-11-2000 |
钢管的无损检测第11部分:表面缺陷探测用的无缝和焊接钢管的液体渗透检验 |
Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
EN 10246-12-2000 |
钢管的无损检测第12部分:表面缺陷探测用的无缝和焊接铁磁钢管的磁粉检验 |
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
EN 10246-13-2000 |
钢管的无损检测第13部分:无缝和焊接钢管(埋弧焊除外)自动全周界厚度的超声检验 |
Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
EN 10246-14-1999 |
钢管的无损检测第14部分:层状缺陷探测用的无缝和焊接钢管(埋弧焊接除外)的自动超声检验 |
Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
EN 10246-15-2000 |
钢管的无损检测第15部分:层状缺陷探测用的制造焊接钢管用钢带/钢板的自动超声检验 |
Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
EN 10246-16-2000 |
钢管的无损检测第16部分:层状缺陷探测用的焊接钢管焊缝附近区域的自动超声检验 |
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
EN 10246-17-2000 |
钢管的无损检测第17部分:层状缺陷探测用的无缝和焊接钢管端部的自动超声检验 |
Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
EN 10246-18-2000 |
钢管的无损检测第18部分:层状缺陷探测用的无缝和焊接铁磁钢管端部的磁粉检验 |
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
EN 10246-2-2000 |
钢管的无损检测第2部分:证明液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外) 的自动涡流 |
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
EN 10246-3-1999 |
钢管的无损检测第3部分:缺陷探测用无缝和焊接钢管(埋弧焊除外)的自动涡流检验 |
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
EN 10246-4-1999 |
钢管的无损检测第4部分:横向缺陷探测用无缝或焊接铁磁钢管的(埋弧焊除外)自动全周界磁传感器检验漏磁 |
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
EN 10246-5-1999 |
钢管的无损检测第5部分:径向缺陷探测用无缝或焊接铁磁钢管的(埋弧焊除外)自动全周界磁传感器检验漏磁 |
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
EN 10246-6-1999 |
钢管的无损检测第6部分:横向缺陷探测用无缝钢管的自动全周界超声检验 |
Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
EN 10246-7-1996 |
钢管的无损检测第7部分:纵向缺陷探测用的无缝和焊接铁磁钢管(埋弧焊除外)的自动周界超声检验 |
Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections |
EN 10246-8-1999 |
钢管的无损检测第8部分:纵向缺陷探测用电焊钢管焊缝的自动超声检验 |
Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
EN 10246-9-2000 |
钢管的无损检测第9部分:探测用纵向和/或横向缺陷埋弧焊钢管焊缝的自动超声检验 |
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
EN 10248-1-1995 |
非合金钢制热轧板堆第1部分:交货技术条件 |
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EN 10248-2-1995 |
非合金钢制热轧板堆第2部分:尺寸和形状公差 |
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
EN 10249-1-1995 |
非合金钢制冷成型板堆第1部分:交货技术条件 |
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
EN 10249-2-1995 |
非合金钢制冷成型板堆第2部分:尺寸和形状公差 |
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
EN 10250-1-1999 |
一般工程用途的敞口钢模锻件第1部分:一般要求 |
Open die steel forgings for general engineering purposes - Part 1: General requirements |
EN 10250-2-1999 |
一般工程用途的敞口钢模锻件第2部分:非合金钢和特殊钢 |
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
EN 10250-3-1999 |
一般工程用途的敞口钢模锻件第3部分:合金特殊钢 |
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels |
EN 10250-4-1999 |
一般工程用途的敞口钢模锻件第4部分:不锈钢 |
Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
EN 10251-1997 |
磁性材料测定电工钢片和电工钢带几何特性值的方法 |
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
EN 10252-1997 |
磁性材料测量磁钢薄板和带材中频磁性能的方法 |
Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
EN 10253-1-1999 |
对缝焊管配件第1部分:一般用途和无特殊检验要求的锻制碳钢 |
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
EN 10254-1999 |
钢封闭模锻件交货一般技术条件 |
Steel closed die forgings - General technical delivery conditions |
EN 10255-2004 |
焊接和螺纹用非合金钢管.交货技术条件 |
|
EN 10256-2000 |
钢管的无损检测1级和2级无损检测人员的资格和能力 |
Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
EN 10257-1-1998 |
动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线第1部分:地面电缆 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
EN 10257-2-1998 |
动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线第2部分:海底电缆 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
EN 10258-1997 |
冷轧不锈钢窄带材和切割长度尺寸和形状公差 |
Cold-rolled stainless steel narrow strip and cut lengths - Tolerances on dimensions and shape |
EN 10259-1997 |
冷轧不锈钢宽带材和金属板/薄板尺寸和形状公差 |
Cold-rolled stainless steel wide strip and plate/sheet - Tolerances on dimensions and shape |
EN 1026-2000 |
门窗 空气渗透性 试验方法 |
Windows and doors - Air permeability - Test method |
EN 10263-2-2001 |
冷加工和冷挤压的钢棒、棒材和线材第2部分:冷加工后不用热处理钢交货的一般技术条件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working |
EN 10263-3-2001 |
冷加工和冷挤压的钢棒、棒材和线材第3部分:表面硬化钢交货的一般技术条件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels |
EN 10263-4-2001 |
冷加工和冷挤压的钢棒、棒材和线材第4部分:淬火和回火钢交货的一般技术条件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering |
EN 10263-5-2001 |
冷加工和冷挤压的钢棒、棒材和线材第5部分:不锈钢交货的一般技术条件 |
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels |
EN 10264-1-2002 |
钢丝和钢丝制品绳用钢丝第1部分:一般要求 |
Steel wire and wire products - Steel wire for ropes - Part 1: General requirements |
EN 10264-2-2002 |
钢丝和钢丝制品绳用钢丝第2部分:一般用途绳用冷拔非合金钢丝 |
Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
EN 10264-3-2002 |
钢丝和钢丝制品绳用钢丝第3部分:重载用途圆形和成形非合金钢丝 |
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
EN 10264-4-2002 |
钢丝和钢丝制品绳用钢丝第4部分:不锈钢钢丝 |
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire |
EN 10265-1995 |
磁性材料钢板和钢带的机械特性和导磁率的规范 |
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
EN 10266-2003 |
钢管、配件和结构空心型材 .产品标准中使用的符号和术语定义 |
Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
EN 10267-1998 |
热加工温度下沉淀硬化铁素体-珠光体钢 |
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
EN 10268-1998 |
冷成形用高屈服强度微合金钢的冷轧扁钢材交货一般条件 |
Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
EN 10269-1999 |
规定高温和/或低温性能的紧固件用钢及镍合金 |
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 1027-2000 |
门窗 水密封性 试验方法 |
Windows and doors - Watertightness - Test method |
EN 10270-1-2001 |
机械弹簧用钢丝第1部分:冷拔纯钢丝/注:与EN10021联合使用 |
Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed steel wire / Note: Applies in conjunction with EN 10021 |
EN 10270-2-2001 |
机械弹簧用钢丝第2部分:油淬火和回火弹簧钢丝/注:与EN10021联合使用 |
Steel wire for mechanical springs - Part 2: Oilhardened and tempered spring steel wire / Note: Applies in conjunction with EN 10021 |
EN 10270-3-2001 |
机械弹簧用钢丝第3部分:不锈弹簧钢丝/注:只与EN10021联合使用 |
Steel wire for mechanical springs - Part 3: Stainless spring steel wire / Note: Applies only in conjunction with EN 10021 |
EN 10271-1998 |
电镀锌镍的扁钢材交货技术条件 |
Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
EN 10272-2000 |
压力用途的不锈钢棒材 |
Stainless steel bars for pressure purposes |
EN 10273-2000 |
压力用途的规定高温度性能的热轧可焊接钢棒 |
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
EN 10274-1999 |
金属材料重物跌落扯裂试验 |
Metallic materials - Drop weight tear test |
EN 10275-1999 |
金属材料管式环液压试验 |
Metallic materials - Tube ring hydraulic pressure test |
EN 10276-1-2000 |
钢铁材料的化学分析钢和铁中氧的测定第1部分:氧含量测定中钢试样的取样和制备 |
Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination |