标准号 |
中文名称 |
英文名称 |
DIN EN ISO 8289-2001 |
釉瓷和搪瓷.检测和确定缺陷位置的低电压试验 |
Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO 8289:2000); German version EN ISO 8289:2001 |
DIN EN ISO 8290-1998 |
釉瓷和搪瓷.室温下抗硫酸的测定 |
Vitreous and porcelain enamels - Determination of resistance to sulfuric acid at room temperature (ISO 8290:1998); German version EN ISO 8290:1998 |
DIN EN ISO 8292-1995 |
动植物脂肪和油.固态脂肪含量的测定.脉冲核磁共振法 |
Animal and vegetable fats and oils - Determination of solid fat content - Pulsed nuclear magnetic resonance method (ISO 8292:1991); German version EN ISO 8292:1995 |
DIN EN ISO 8294-1999 |
动植物的脂肪和油.铜、铁和镍含量的测定.石墨熔炉原子吸收法 |
Animal and vegetable fats and oils - Determination of copper, iron and nickel contents - Graphite furnace atomic absorption method (ISO 8294:1994); German version EN ISO 8294:1999 |
DIN EN ISO 8295-2004 |
塑料.薄膜和薄板.摩擦系数的测定 |
|
DIN EN ISO 8307-1998 |
软泡沫塑料聚合材料.回跳弹性的测定 |
Flexible cellular polymeric materials - Determination of resilience (ISO 8307:1990); German version EN ISO 8307:1997 |
DIN EN ISO 8308-1996 |
带和不带填料的橡胶和塑料软管及管系.软管和管壁的透液量的测定 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993); German version EN ISO 8308:1995 |
DIN EN ISO 8311-1996 |
轻质碳氢化合物制冷液.船上薄膜式罐和柱型罐的标定.物理测量法 |
Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement (ISO 8311:1989); German version EN ISO 8311:1995 |
DIN EN ISO 8316-1995 |
封闭管道内液体流量的测量.容积测量箱的液体收集法 |
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995 |
DIN EN ISO 8317 Berichtigung 1-2005 |
防儿童拆开的包装.可再次包装件的要求和试验程序 |
|
DIN EN ISO 8317-2004 |
防儿童拆开的包装.可再次包装的要求和试验程序 |
|
DIN EN ISO 8318-2002 |
包装.完满运输包装和成组装运.采用可变频的正弦振动试验 |
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000); German version EN ISO 8318:2002 |
DIN EN ISO 8320-1-2004 |
接触镜片和接触镜片护理产品.词汇.第2部分:接触镜片 |
(Contact lenses and contact lens care products - Vocabulary - Part 1: Contact lenses (ISO 8320-1:2003); German version EN ISO 8320-1:2003) |
DIN EN ISO 8320-1-2004 |
接触镜片和接触镜片护理产品.词汇.第2部分:接触镜片 |
|
DIN EN ISO 8320-2-2001 |
接触镜片和接触镜片护理产品.词汇.第2部分:接触镜片护理产品 |
Contact lenses and contact lens care products - Vocabulary - Part 2: Contact lens care products (ISO 8320-2:2001); German version EN ISO 8320-2:2001 |
DIN EN ISO 8321-1-2003 |
眼科光学.接触透镜的材料、光学和尺寸性能规范.第1部分:刚性角膜接触透镜和巩膜接触透镜 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 1: Rigid corneal and scleral contact lenses (ISO 8321-1:2002); German version EN ISO 8321-1:2002 |
DIN EN ISO 8321-2-2000 |
光学和光学仪器.接触透境材料,光学特性和尺寸特性规范.第2部分:单视水晶透镜 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2: Single-vision hydrogel lenses (ISO 8321-2:2000); German version EN ISO 8321-2:2000 |
DIN EN ISO 8325-2004 |
牙医学.旋转仪器的试验方法 |
|
DIN EN ISO 8330-2000 |
橡胶和塑料软管和软管组件.词汇表 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000 |
DIN EN ISO 8351-1-1996 |
包装.袋包装规格方法.第1部分:纸袋 |
Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994); German version EN ISO 8351-1:1996 |
DIN EN ISO 8351-2-1996 |
包装.袋包装规格方法.第2部分:热塑软薄膜制成的包装袋 |
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994); German version EN ISO 8351-2:1996 |
DIN EN ISO 8359-1997 |
医用氧气浓缩器.安全要求 |
Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996); German version EN ISO 8359:1996 |
DIN EN ISO 8362-1-2004 |
注射容器及附件.第1部分:玻璃管注射瓶 |
|
DIN EN ISO 8362-4-2004 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
DIN EN ISO 8367-1-1996 |
包装.一般用途袋子的尺寸公差.第1部分:纸袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993); German version EN ISO 8367-1:1996 |
DIN EN ISO 8367-2-1996 |
包装.一般用途袋子的尺寸公差.第2部分:热塑塑料薄膜袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993); German version EN ISO 8367-2:1996 |
DIN EN ISO 8373-1996 |
操作工业机器人.词汇 |
Manipulating industrial robots - Vocabulary (ISO 8373:1994); German version EN ISO 8373:1996 |
DIN EN ISO 8381-2000 |
以奶为基料的婴儿食品.脂肪含量的测定.重量分析法(参照法) |
Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) (ISO 8381:2000); German version EN ISO 8381:2000 |
DIN EN ISO 8384-2001 |
船和航运技术.挖泥船.词汇 |
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000); Trilingual version EN ISO 8384:2001 |
DIN EN ISO 8385-2000 |
船和海船术语.挖泥船.分类 |
Ships and marine technology - Dredgers - Classification (ISO 8385:1999); German version EN ISO 8385:1999 |
DIN EN ISO 8401-1995 |
金属镀层.延展性的测量方法述评 |
Metallic coatings - Review of methods of measurement of ductility (ISO 8401:1986); German version EN ISO 8401:1994 |
DIN EN ISO 8420-2002 |
动植物脂肪和油.极性化合物含量测定 |
Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002 |
DIN EN ISO 8429-1996 |
光学和光学仪器.眼科学.分度盘刻度 |
Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986); German version EN ISO 8429:1996 |
DIN EN ISO 8434-1-1997 |
液压传动和一般用金属导管连接件.第1部分:24度喇叭形压合接头 |
Metallic tube connections for fluid power and general use - Part 1: 24?compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997 |
DIN EN ISO 8434-4-2000 |
液压及通用金属管件连接.第4部分:以O形密封圈焊接于接头上的24度圆锥体连接件 |
Metallic tube connections for fluid power and general use - Part 4: 24?cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000 |
DIN EN ISO 8442-1-1998 |
和食品接触的材料及物品.刀具和餐桌器具.第1部分:准备餐食用刀具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997); German version EN ISO 8442-1:1997 |
DIN EN ISO 8442-2-1998 |
和食品接触的材料及物品.刀具和餐桌器具.第2部分:镀银和不锈钢餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997); German version EN ISO 8442-2:1997 |
DIN EN ISO 8442-3-1998 |
与食品接触的材料和物品.刀具和餐桌器皿.第3部分:镀银餐桌器皿和装饰凹型器皿 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silver-plated table and decorative holloware (ISO 8442-3:1997); German version EN ISO 8442-3:1997 |
DIN EN ISO 8442-4-1998 |
和食品接触的材料及物品.刀具和餐桌器具.第4部分:镀金餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 4: Requirements for gold plated cutlery (ISO 8442-4:1997); German version EN ISO 8442-4:1997 |
DIN EN ISO 8442-6-2001 |
与食品接触的材料和物品.刀叉餐具和凹型餐具.第6部分:薄镀银的由清漆保护的餐桌凹形餐具 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000 |
DIN EN ISO 8442-7-2001 |
与食品接触的材料和物品.刀叉餐具和凹形餐具.第7部分:由银、其他贵金属及其合金制成的刀叉餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000 |
DIN EN ISO 8442-8-2001 |
与食品接触的材料和物品.刀叉餐具和凹形餐具.第8部分:银制餐桌餐具和装饰性凹形餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000 |
DIN EN ISO 845-1995 |
泡沫橡胶和塑料.表观密度的测定 |
Cellular plastics and rubbers - Determination of apparent (bulk) density (ISO 845:1988); German version EN ISO 845:1995 |
DIN EN ISO 846-1997 |
塑料.微生物作用的评价 |
Plastics - Evaluation of the action of microorganisms (ISO 846:1997); German version EN ISO 846:1997 |
DIN EN ISO 8467-1995 |
水质.高锰酸盐指数的测定 |
Water quality - Determination of permanganate index (ISO 8467:1993); German version EN ISO 8467:1995 |
DIN EN ISO 8469 Berichtigung 1-2001 |
DIN EN ISO 8469-1995的勘误 |
Corrigendum to DIN EN ISO 8469:1995 (German version EN ISO 8469:1995/A1:2000) |
DIN EN ISO 8469-1995 |
小艇.不耐火的燃料软管 |
Small craft - Non-fire-resistant fuel hoses (ISO 8469:1994); German version EN ISO 8469:1995 |
DIN EN ISO 8491-2004 |
金属材料.管(全截面).弯曲试验 |
|
DIN EN ISO 8492-2004 |
金属材料.管.压扁试验 |
|
DIN EN ISO 8493-2004 |
金属材料.管.扩口试验 |
|
DIN EN ISO 8494-2004 |
金属材料.管.卷边试验 |
|
DIN EN ISO 8495-2004 |
金属材料.管.环形扩口试验 |
|
DIN EN ISO 8496-2004 |
金属材料.管.环形拉伸试验 |
|
DIN EN ISO 8497-1996 |
绝热.管道用绝热稳定状态中热传输性能测定 |
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996 |
DIN EN ISO 8501-1 Bb.1-2002 |
涂料和有关产品使用之前钢衬底的预处理.表面清洁度的目视评定.对第1部分的信息性补充:不同磨料喷射清理所致钢材表观改变的典型样板照片(ISO 8501-1:1988/补充:1994) |
|
DIN EN ISO 8501-1-2002 |
涂料和有关产品使用之前钢衬底的预处理.表面清洁度的目视评定.第1部分:未涂装的钢材和全面清除原有涂层后的钢材的锈蚀等级和除锈等级(ISO 8501-1:1988) |
|
DIN EN ISO 8501-2-2002 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第2部分:已有覆层局部除去后已涂覆钢衬底的制备等级 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994); |
DIN EN ISO 8502-2-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度的检验.第2部分:已清洁的表面上氯化物的实验室测定 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992); German version EN ISO 8502-2:1999 |
DIN EN ISO 8502-3-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度评定的检验.第3部分:为涂层作准备的钢表面上灰尘的评定(粘合带法) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992); Ge |
DIN EN ISO 8502-4-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度评定的检验.第4部分:涂层前出现露水可能性的评估指南 |
|
DIN EN ISO 8502-6-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度评定的检验.第6部分:分析用可溶于水的杂质的萃取,布雷斯勒法(Bresle) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis; the Bresle method (ISO 8502-6:1995); German version EN ISO 8502- |
DIN EN ISO 8502-9-2001 |
涂料和有关产品使用前钢衬底的制备.表面清洁度评定试验.第9部分:水溶性盐热导测定的现场方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998); German version EN ISO |
DIN EN ISO 8503-1-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第1部分:喷砂处理表面的 ISO评定比较样板的规范和定义 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra |
DIN EN ISO 8503-2-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第2部分:喷砂处理表面的定级方法.比较方 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel; comparator proced |
DIN EN ISO 8503-3-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第3部分:ISO表面轮廓比较仪的校准方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
DIN EN ISO 8503-4-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第4部分:ISO表面轮廓比较仪的校准方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
DIN EN ISO 8504-1-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第1部分:总则 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000); German version EN ISO 8504-1:2001) |
DIN EN ISO 8504-2-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第2部分:喷砂清理 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001) |
DIN EN ISO 8504-3-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第3部分:手工工具和电动工具清洗 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993); German version EN ISO 8504-3:2001) |
DIN EN ISO 8536-1-2004 |
医用输液设备.第1部分:输液玻璃瓶 |
|
DIN EN ISO 8536-2 Berichtigung 1-2005 |
医用输液设备.第2部分:输液瓶塞.DIN EN ISO 8536-2-2003的勘误 |
|
DIN EN ISO 8536-2-2003 |
医用输液设备.第2部分:输液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2001); German version EN ISO 8536-2:2002, German and English texts |
DIN EN ISO 8536-8-2005 |
医用输液器具.第8部分:有压力输液仪的输液器具 |
|
DIN EN ISO 8537-2001 |
胰导素注射用的有或无针头的灭菌一次性使用注射器. |
Sterile single-use syringes, with or without needle, for insulin (ISO 8537:1991) (including Amendment AMD 1:2000); German version EN ISO 8537:1994 + A1:2000 |
DIN EN ISO 8561-1996 |
家用无霜制冷设备.强制循环冷却的冰箱,制冷机,冷冻机和低温制冷机.性能和测试方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods (ISO 8561:1995); German version EN ISO 8561:1 |
DIN EN ISO 8561/A1-1998 |
家用无霜制冷设备.制冷机,制冷机冷藏柜,冷冻食品储藏柜和用内压力空气循环冷却的食品冷藏柜特性和试验方法.补充件1:强易腐蚀品防腐用特殊冷冻箱 |
|
DIN EN ISO 8565-1995 |
金属和合金.大气腐蚀试验.野外试验的一般要求 |
Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992); German version EN ISO 8565-1995 |
DIN EN ISO 8580-1995 |
橡胶和塑料软管.稳定状态下抗紫外线的测定 |
(Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995) |
DIN EN ISO 8596-1996 |
眼科光学.视力检验.标准视力符号及其演示 |
(Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994); German version EN ISO 8596:1996) |
DIN EN ISO 8597-1996 |
眼科光学.视力检验.视力符号相关连接方法 |
(Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995); German version EN ISO 8597:1996) |
DIN EN ISO 8598-1998 |
光学和光学仪器.焦距计 |
(Optics and optical instruments - Focimeters (ISO 8598:1996); Deutsche Fassung EN ISO 8598:1998) |
DIN EN ISO 8599-1997 |
光学和光学仪器.接触镜片.光谱透射率和光透射率的测定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994); German version EN ISO 8599:1996 |
DIN EN ISO 8611-1-2004 |
物料搬运用托盘.平托盘.第1部分:试验方法 |
|
DIN EN ISO 8612-2001 |
眼科装置.眼压计 |
Ophthalmic instruments - Tonometers (ISO 8612:2001); German version EN ISO 8612:2001 |
DIN EN ISO 8618-1998 |
塑料.液态酚醛树脂.非挥发性物质的常规测定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995); German version EN ISO 8618:1998 |
DIN EN ISO 8619-1998 |
塑料.酚醛树脂粉.在加热玻璃板上流动距离的测定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:1995); German version EN ISO 8619:1998 |
DIN EN ISO 8624-2002 |
眼科光学.眼镜架.测量系统和术语 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2002); German version EN ISO 8624:2002 |
DIN EN ISO 8655-1-2002 |
活塞式容量测量仪器.第1部分:术语、一般要求和用户使用建议 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002); German version EN ISO 8655-1:2002 |
DIN EN ISO 8655-2-2002 |
活塞式容量测量仪器.第2部分:活塞式吸量管 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002); German version EN ISO 8655-2:2002 |
DIN EN ISO 8655-3-2002 |
活塞式容量测量仪器.第3部分:活塞式玻璃量管 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002); German version EN ISO 8655-3:2002 |
DIN EN ISO 8655-4-2002 |
活塞式容量测量仪器.第4部分:稀释器 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002); German version EN ISO 8655-4:2002 |
DIN EN ISO 8655-5-2002 |
活塞式容量测量仪器.第5部分:分配器 |
Piston-operated volumetric apparatus - Part 5: Dispenser (ISO 8655-5:2002); German version EN ISO 8655-5:2002 |
DIN EN ISO 8655-6-2002 |
活塞式容量测量仪器.第6部分:确定测量误差的重量分析法 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002); German version EN ISO 8655-6:2002 |
DIN EN ISO 8655-7-2005 |
活塞式容量测量仪器.第7部分:评估设备性能用非重量测量法(ISO 8655-1-2005); 德文版本 EN ISO 8655-1-2005 |
|
DIN EN ISO 8662-10 Berichtigung 1-2002 |
DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002)勘误 |
Corrigenda to DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002) |
DIN EN ISO 8662-10-1999 |
手提电动工具.手柄振动测量.第10部分:步冲轮廓机和剪切机械 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998); German version EN ISO 8662-10:1998 |
DIN EN ISO 8662-12-1997 |
便携式手提动力工具.手柄振动测量.第12部分:有往复作用的锯和锉和有摆动或旋转作用的锯 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997); German version EN ISO 8662-12:1997 |
DIN EN ISO 8662-13 Berichtigung 1-1999 |
对DIN EN ISO 8662-13:1997-10的校正 |
Corrigenda to DIN EN ISO 8662-13:1997-10 (EN ISO 8662-13:1997/AC:1998) |
DIN EN ISO 8662-13-1997 |
便携式手提动力工具.手柄振动测量.第13部分:模具研模机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997); German version EN ISO 8662-13:1997 |
DIN EN ISO 8662-14-1997 |
便携式手提动力工具.手柄机械振动的测量.第14部分:石料加工机和针式标定器 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996); German version EN ISO 8662-14:1996 |
DIN EN ISO 8662-4-1995 |
便携式手提动力工具.手柄振动的测量.第4部分:磨床 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994); German version EN ISO 8662-4:1995 |
DIN EN ISO 8662-6-1995 |
便携式手提动力工具.手柄振动的测量.第6部分:冲击式钻机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994); German version EN ISO 8662-6:1995 |
DIN EN ISO 8662-7-1997 |
便携式手提动力工具.手柄振动测量.第7部分:扳手,旋具与具有冲击,冲力和刻踞齿作用的螺纹滚子 |
Hand-held portable power tools - Measurement of vibration at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or rachet action (ISO 8662-7:1997); German version EN ISO 8662-7:1997 |
DIN EN ISO 8662-8-1997 |
便携式手提动力工具.手柄振动测量.第8部分:抛光和旋转,轨道和随机轨道砂轮机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997); German version EN ISO 8662-8:1997 |
DIN EN ISO 8662-9-1997 |
便携式手提动力工具.手柄振动的测量.第9部分:夯实机 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996); Deutsche Fassung EN ISO 8662-9:1996 |
DIN EN ISO 8665 Berichtigung 1-2001 |
DIN EN ISO 8665-1995的勘误 |
Corrigendum to DIN EN ISO 8665:1995 (German version EN ISO 8665:1995/A1:2000) |
DIN EN ISO 8665-1995 |
小型船舶.船舶驱动电动机和装置.功率测量和说明 |
Small craft - Marine propulsion engines and systems - Power measurements and declarations (ISO 8665:1994); German version EN ISO 8665:1995 |
DIN EN ISO 8666-2003 |
小艇.主要数据 |
Small craft - Principal data (ISO 8666:2002); German version EN ISO 8666:2002 |
DIN EN ISO 8669-2-1997 |
尿收集袋.第2部分:要求和试验方法 |
Urine collection bags - Part 2: Requirements and test methods (ISO 8669-2:1996); German version EN ISO 8669-2:1996 |
DIN EN ISO 8670-2-1997 |
造口术收集袋.第2部分:要求和试验方法 |
Ostomy collection bags - Part 2: Requirements and test methods (ISO 8670-2:1996); German version EN ISO 8670-2:1996 |
DIN EN ISO 8673-2001 |
有米制细牙螺纹的1型六角螺母.产品等级A和B |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999); German version EN ISO 8673:2000 |
DIN EN ISO 8674-2001 |
有米制细牙螺纹的2型六角螺母.产品等级A和B |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999); German version EN ISO 8674:2000 |
DIN EN ISO 8675-2001 |
有米制细牙螺纹的六角薄螺母(倒角).产品等级A和B |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000 |
DIN EN ISO 8676-2001 |
有米制细牙螺纹的六角头螺钉.产品等级A和B |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000 |
DIN EN ISO 868-1998 |
塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度) |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985); German version EN ISO 868:1997 |
DIN EN ISO 8689-1-2000 |
水质.江河的生物分类.第1部分:对海底大型无脊椎动物调查的生物质量数据的解释指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000); German version EN ISO 8689-1:2000 |
DIN EN ISO 8689-2-2000 |
水质.江河的生物分类.第2部分:对海底大型无脊椎动物调查的生物质量数据的表示指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000); German version EN ISO 8689-2:2000 |
DIN EN ISO 8692-2005 |
水质.用单细胞绿藻进行淡水藻类生长抑制性试验 |
|
DIN EN ISO 8728-1999 |
造船和航海技术.航海用陀螺罗盘 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997); German version EN ISO 8728:1998 |
DIN EN ISO 8729-1999 |
造船和航海技术.海上雷达反光镜 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997); German version EN ISO 8729:1998 |