标准号 |
中文名称 |
英文名称 |
DIN EN 530-1995 |
防护服材料的抗磨性.检验方法 |
(Abrasion resistance of protective clothing material - Test methods; German version EN 530:1994) |
DIN EN 531-1998 |
高温工人用防护服(包括修改A1:1998) |
(Protective clothing for workers exposed to heat (includes Amendment A1:1998); German version EN 531:1995 + A1:1998) |
DIN EN 533-1997 |
防护服.防高温和火焰.限制火焰蔓延的材料和材料合成物 |
(Protective clothing - Protection against heat and flame - Limited flame spread materials and material assemblies; German version EN 533:1996) |
DIN EN 534-1998 |
沥青波纹板 |
(Corrugated bitumen sheets; German version EN 534:1998) |
DIN EN 536-1999 |
筑路机械.沥青混合料搅拌设备.安全性要求 |
(Road construction machines - Asphalt mixing plants - Safety requirements; German version EN 536:1999) |
DIN EN 538-1994 |
重叠敷设用粘土屋顶瓦.抗弯强度检验 |
(Clay roofing tiles for discontinuous laying - Flexural strength test; German version EN 538:1994) |
DIN EN 539-1-1994 |
重叠敷设用粘土屋顶瓦.物理性能测定.第1部分:不渗水性检验 |
(Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test; German version EN 539-1:1994) |
DIN EN 539-1-2005 |
非连续敷设用粘土屋面瓦.物理特性的测定.第1部分:不透水性试验 |
|
DIN EN 539-2-1998 |
重叠敷设用粘土屋顶瓦.物理性能测定.第2部分:抗冻性能的测定 |
(Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Tests for frost resistance; German version EN 539-2:1998) |
DIN EN 54-1-1996 |
火灾报警装置.第1部分:导言 |
(Fire detection and fire alarm systems - Part 1: Introduction; German version EN 54-1:1996) |
DIN EN 54-10-2002 |
火灾探测和报警系统.第10部分:火焰探测器.火警点探测器 |
(Fire detection and fire alarm systems - Part 10: Flame detectors; Point detectors; German version EN 54-10:2002) |
DIN EN 54-11-2001 |
火灾探测和火灾警报系统.第11部分:手摇呼叫地点 |
(Fire detection and fire alarm systems - Part 11: Manual call points; German version EN 54-11:2001) |
DIN EN 54-12-2003 |
火灾探测和火灾警报系统.第12部分:烟雾探测器.利用光学光束的线性探测器 |
(Fire detection and fire alarm systems - Part 12: Smoke detectors; Line detectors using an optical light beam; German version EN 54-12:2002) |
DIN EN 54-2-1997 |
火灾检测和报警系统.第2部分:控制和指示设备 |
(Fire detection and fire alarm systems - Part 2: Control and indicating equipment; German version EN 54-2:1997) |
DIN EN 54-3-2001 |
火灾探测和火灾警报系统.第3部分:火灾警报装置.发声器 |
(Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders; German version EN 54-3:2001) |
DIN EN 54-3/A1-2002 |
火灾探测和火灾警报系统.第3部分:火灾警报系统的发声器.修改件A1 |
(Fire detection and fire alarm systems - Part 3: Fire alarm devices; Sounders; Amendment A1; German version EN 54-3:2001/A1:2002) |
DIN EN 54-4-1997 |
火灾探测和报警设备.第4部分:供电设备 |
(Fire detection and fire alarm systems - Part 4: Power supply equipment; German version EN 54-4:1997) |
DIN EN 54-4/A1-2003 |
火灾探测和火灾警报系统.第4部分:电源设备.修改件A1 |
(Fire detection and fire alarm systems - Part 4: Power supply equipment; Amendment A1; German version EN 54-4:1997/A1:2002) |
DIN EN 54-5-2001 |
火灾探测和火灾报警系统.第5部分:热探测器,点探测器 |
(Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; German version EN 54-5:2000) |
DIN EN 54-5/A1-2002 |
火灾探测和火灾警报系统.第5部分:热探测器.定位探测器.修改件A1 |
(Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors; Amendment A1; German version EN 54-5:2000/A1:2002) |
DIN EN 54-7-2001 |
火灾探测和火灾报警系统.第7部分:烟探测器.使用散射光传输光或电离物的烟探测器 |
(Fire detection and fire alarm systems - Part 7: Smoke detectors; Point detectors using scattered light, transmitted light or ionization; German version EN 54-7:2000) |
DIN EN 54-7/A1-2002 |
火灾探测和火灾警报系统.第7部分:利用散射光、透射光或电离作用的定点探测器的烟雾探测器.修改件A1 |
(Fire detection and fire alarm systems - Part 7: Smoke detectors; Point detectors using scattered light, transmitted light or ionization; Amendment A1; German version EN 54-7:2000/A1:2002) |
DIN EN 540 Berichtigung 1-1998 |
对DINEN540:1993-07的校正.EN540/AC:1998-02的更正 |
(Corrigenda to DIN EN 540:1993-07; Corrigendum EN 540/AC:1998-02) |
DIN EN 540-1993 |
人用医疗仪器的临床检验 |
(Clinical investigation of medical devices for human subjects; German version EN 540:1993) |
DIN EN 541-1995 |
铝和铝合金.罐,塞子和盖子用轧制品.规范 |
(Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications; German version EN 541:1995) |
DIN EN 542-2003 |
胶粘剂.密度测定 |
(Adhesives - Determination of density; German version EN 542:2003) |
DIN EN 543-2003 |
胶粘剂.粉未和粒状胶粘剂表观密度的测定 |
(Adhesives - Determination of apparent density of powder and granule adhesives; German version EN 543:2003) |
DIN EN 544-1998 |
含矿物填料和/或塑料填料的沥青屋顶板 |
(Bitumen shingles with mineral and/or synthetic reinforcements; German version EN 544:1998) |
DIN EN 545-2002 |
水管用球墨铸铁管、配件、附件及其接头.要求和试验方法 |
(Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2002) |
DIN EN 546-1-1996 |
铝和铝合金.箔.第1部分:交货技术条件 |
(Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery; German version EN 546-1:1996) |
DIN EN 546-2-1996 |
铝和铝合金.箔.第2部分:机械性能 |
(Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties; German version EN 546-2:1996) |
DIN EN 546-3-1996 |
铝和铝合金.箔.第3部分:极限尺寸 |
(Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; German version EN 546-3:1996) |
DIN EN 546-4-1997 |
铝和铝合金.箔.第4部分:特殊性能要求 |
(Aluminium and aluminium alloys - Foil - Part 4: Special property requirements; German version EN 546-4:1997) |
DIN EN 547-1-1997 |
机器的安全性.人体测量.第1部分:机器工作场地的整个人体通道的尺寸测定用原理 |
(Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery; German version EN 547-1:1996) |
DIN EN 547-2-1997 |
机器的安全性.人体测量.第2部分:通道口尺寸测定的原理 |
(Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings; German version EN 547-2:1996) |
DIN EN 547-3-1997 |
机器的安全性.人体测量.第3部分:人体尺寸数据 |
(Safety of machinery - Human body measurements - Part 3: Anthropometric data; German version EN 547-3:1996) |
DIN EN 548-1997 |
弹性地板覆盖物.带花纹和不带花纹油毡的规范 |
(Resilient floor coverings - Specification for plain and decorative linoleum; German version EN 548:1997) |
DIN EN 548-2004 |
弹性地板覆盖物.带花纹和不带花纹油毡的规范 |
|
DIN EN 549-1995 |
使用除工业过程所用以外燃气器具和有关控制钮的密封和膜片用橡胶材料 |
(Rubber materials for seals and diaphragms for gas appliances and gas equipmemt; German version EN 549:1994) |
DIN EN 550-1994 |
医疗制品的消毒.用环氧乙烷消毒的验证和常规监督 |
(Sterilization of medical devices - Validation and routine control of ethylene oxide sterilization; German version EN 550:1994) |
DIN EN 55011 Bb.1-1999 |
工业,科学和医疗设备(ISM设备).国际电信联盟(ITU)规定的频带中干扰发射电平的指南 |
(Industrial, scientific and medical equipment (ISM) - Guidelines for emission levels within the bands designated by the ITU (IEC/CISPR 28:1997)) |
DIN EN 55011-2003 |
工业、科学和医疗(ISM)用射频设备.无线电干扰特性.极限值和测量方法 |
(Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement (IEC/CISPR 11:1997, modified + A1:1999 + A2:2002); German version EN 55011:1998 + A1:1999 + A2:2002) |
DIN EN 55012-2002 |
车辆、船舶和内燃机驱动装置.无线电干扰特性.接收器保护用测量方法和极限(那些安装在车辆/船舶/装置上的或 |
(Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/d |
DIN EN 55012-2005 |
车辆、船舶和内燃机驱动装置.无线电干扰特性.接收器保护的限值和测量方法(不包括那些安装在车辆/船舶/装置上的或邻近车辆/船舶/装置上的接收器) |
|
DIN EN 55013-2002 |
声音和电视广播接收机.无线电干扰特性.限值和测量方法 |
(Sound and television broadcast receivers - Radio disturbance characteristics - Limits and methods of measurement (IEC/CISPR 13:2001, modified); German version EN 55013:2001) |
DIN EN 55014-1-2002 |
电磁兼容性.家用器具、电动工具和类似电器的要求.第1部分:辐射 |
(Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (IEC/CISPR 14-1:2000 + A1:2001); German version EN 55014-1:2000 + A1:2001) |
DIN EN 55014-2-2002 |
电磁兼容性.家用器具、电动工具和类似电器的要求.第2部分:抗干扰性.产品系列标准 |
(Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity; Product family standard (including Corrigendum:1997) (IEC/CISPR 14-2:1997 + A1:2001); German version EN 55014-2:1997 + A1:2001 |
DIN EN 55015-2003 |
电气照明和类似设备无线电干扰特性的限值和测量方法 |
(Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (IEC/CISPR 15:2000 + A1:2001 + A2:2002); German version EN 55015:2000 + A1:2001 + A2:2002) |
DIN EN 55020 Bb.1-2003 |
DINEN55020-2003的说明表1.声音和电视广播接收机和相关设备.抗扰性.限值和测量方法.DINEN55020-2000的应用 |
(Explanatory sheet 1 to DIN EN 55020 (VDE 0872 Teil 20):2003-02 - Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement; Application guide to DIN EN 55020 (VDE 0872 Part 20):2000-0 |
DIN EN 55020-2005 |
声音和电视广播接收机及相关设备.抗扰特性.测量限值和方法 |
|
DIN EN 55022-2003 |
信息技术设备.无线电干扰特性.限值和测量方法 |
(Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (IEC/CISPR 22:1997 + A1:2000 + A2:2002); German version EN 55022:1998 + Corrigendum July 2003 + A1:2000 + Corrigendum April 2003 + A2:2003) |
DIN EN 55024-2002 |
信息技术设备.抗干扰特性的测量方法和极限值 |
(Information technology equipment - Immunity characteristics - Limits and methods of measurement (IEC/CISPR 24:1997, modified + A1:2001); German version EN 55024:1998 + A1:2001) |
DIN EN 55103-1-1997 |
电磁兼容.音频.视频,视听设备以及专用播音室光调制设备的产品系列目录.第1部分:干扰发射 |
(Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission; German version EN 55103-1:1996) |
DIN EN 55103-2-1997 |
电磁兼容.音频.视频,视听设备以及专用播音室光调制设备的产品系列目录.第2部分:抗干扰性 |
(Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity; German version EN 55103-2:1996) |
DIN EN 552-2001 |
医疗装置的消毒.用射线消毒的验证和常规监督 |
(Sterilization of medical devices - Validation and routine control of sterilization by irradiation (includes Corrigendum 1:1999 (A1:1999) and Amendment A2:2000); German version EN 552:1994 + Corrigendum 1:1999 (A1:1999) + Amendment A2:2000) |
DIN EN 554-1994 |
医疗制品消毒.用湿热消毒的验证和常规监督 |
(Sterilization of medical devices - Validation and routine control of sterilization by moist heat; German version EN 554:1994) |
DIN EN 556-1-2002 |
医疗设备的消毒.对标有“消毒“字样的医疗设备的要求.第1部分:定期消毒医疗设备的要求 |
(Sterilization of medical devices - Requirements for medical devices to be designated “STERILE“ - Part 1: Requirements for terminally sterilized medical devices; German version EN 556-1:2001) |
DIN EN 556-2-2004 |
医疗器械的消毒.对标有消毒字样的医疗器械的要求.第2部分:经无菌处理的医疗器械的要求 |
|
DIN EN 558-1-1995 |
工业配件.安装在带法兰的管道中的金属配件结构长度.第1部分:按PN标识的配件 |
(Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves; German version EN 558-1:1995) |
DIN EN 558-2-1995 |
工业配件.安装在带法兰的管道中的金属配件结构长度.第2部分:按级别标识的配件 |
(Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves; German version EN 558-2:1995) |
DIN EN 559-2003 |
气焊机.焊接、切割和相关工艺用橡胶软管 |
(Gas welding equipment - Rubber hoses for welding, cutting and allied processes; German version EN 559:2003) |
DIN EN 560-1994 |
气焊设备.焊接,切割和相关工艺用装置和设备的软管连接件 |
(Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes; German version EN 560:1994) |
DIN EN 561-2002 |
气焊设备.焊接,切割和相关工艺用带自动气体关闭的软管连接件 |
(Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes; German version EN 561:2002) |
DIN EN 562-2003 |
气焊设备.焊接、切割和相关工艺用压力计 |
(Gas welding equipment - Pressure gauges used in welding, cutting and allied processes; German version EN 562:2003) |
DIN EN 563-2000 |
机械安全.可接触表面的温度.确定高温表面温度极限值的人类工效学数据 |
(Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces (includes Corrigendum AC:1994 and Amendment A1:1999); German version EN 563:1994 + AC:1994 + A1:1999) |
DIN EN 564-1997 |
登山装置.缆绳.安全技术要求和检验方法 |
(Mountaineering equipment - Accessory cord - Safety requirements and test methods; German version EN 564:1997) |
DIN EN 565-1997 |
登山装置.登山带.安全技术要求和检验方法 |
(Mountaineering equipment - Tape - Safety requirements and test methods; German version EN 565:1997) |
DIN EN 566-1997 |
登山装置.绳套.安全技术要求和检验方法 |
(Mountaineering equipment - Slings - Safety requirements and test methods; German version EN 566:1997) |
DIN EN 567-1997 |
登山装置.绳夹.安全技术要求和检验方法 |
(Mountaineering equipment - Rope clamps - Safety requirements and test methods; German version EN 567:1997) |
DIN EN 568-1997 |
登山装备.冰镐.安全技术要求和检验方法 |
(Mountaineering equipment - Ice anchors - Safety requirements and test methods; German version EN 568:1997) |
DIN EN 569-1997 |
登山装备.岩石钩.安全技术要求和检验方法 |
(Mountaineering equipment - Pitons - Safety requirements and test methods; German version EN 569:1997) |
DIN EN 570-1994 |
铝和铝合金.由半成品作的挤压用凸台.规范 |
(Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications; German version EN 570:1994) |
DIN EN 571-1-1997 |
无损检验.渗透检验.第1部分:一般原理 |
(Non-destructive testing - Penetrant testing - Part 1: General principles; German version EN 571-1:1997) |
DIN EN 572-1-1995 |
建筑用玻璃.石灰氧化钠玻璃制基本产品.第1部分:定义和一般物理及机械性能 |
(Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties; German version EN 572-1:1994) |
DIN EN 572-1-2004 |
建筑用玻璃.基本钠钙玻璃制品.第1部分:定义和一般物理及机械特性 |
|
DIN EN 572-2-1995 |
建筑用玻璃.石灰氧化钠玻璃制基本产品.第2部分:浮法玻璃 |
(Glass in building - Basic soda lime silicate glass products - Part 2: Float glass; German version EN 572-2:1994) |
DIN EN 572-2-2004 |
建筑用玻璃.基本钠钙玻璃制品.第2部分:浮法玻璃 |
|
DIN EN 572-3-1995 |
建筑用玻璃.石灰氧化钠玻璃制基本产品.第4部分:抛光金属丝玻璃 |
(Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass; German version EN 572-3:1994) |
DIN EN 572-3-2004 |
建筑用玻璃.基本钠钙玻璃制品.第3部分:抛光络网玻璃 |
|
DIN EN 572-4-1995 |
建筑用玻璃.石灰氧化钠玻璃制基本产品.第4部分:拉伸平板玻璃 |
(Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass; German version EN 572-4:1994) |
DIN EN 572-4-2004 |
建筑用玻璃.基本钠钙玻璃制品.第4部分:拉制平板玻璃 |
|
DIN EN 572-5-1995 |
建筑用玻璃.石灰氧化钠玻璃制基本产品.第5部分:装饰玻璃 |
(Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass; German version EN 572-5:1994) |
DIN EN 572-5-2004 |
建筑用玻璃.基本钠钙玻璃制品.第5部分:压花玻璃 |
|
DIN EN 572-6-1995 |
建筑用玻璃.石灰氧化钠玻璃制基本产品.第6部分:金属丝装饰玻璃 |
(Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass; German version EN 572-6:1994) |
DIN EN 572-6-2004 |
建筑用玻璃.基本钠钙玻璃制品.第6部分:嵌丝压花玻璃 |
|
DIN EN 572-7-1995 |
建筑用玻璃.石灰氧化钠玻璃制基本产品.第7部分:带和不带金属丝夹层的断面结构玻璃 |
(Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass; German version EN 572-7:1994) |
DIN EN 572-7-2004 |
建筑用玻璃.基本钠钙玻璃制品.第7部分:嵌丝和不嵌丝的槽形玻璃 |
|
DIN EN 572-8-2004 |
建筑用玻璃.基本钠钙玻璃产品.第8部分:供货和最终切割尺寸 |
|
DIN EN 572-9-2005 |
建筑用玻璃.基本钠钙玻璃产品.第9部分:合格性评定/产品标准 |
|
DIN EN 573-1-1994 |
铝和铝合金.半成品的化学成份和形式.第1部分:标准号标识系统 |
(Aluminium and aluminium alloys - Chemical composition and forms of wrought products - Part 1: Numerical designation system; German version EN 573-1:1994) |
DIN EN 573-2-1994 |
铝和铝合金.半成品的化学成份和形式.第2部分:化学符号的标识系统 |
(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based on designation system; German version EN 573-2:1994) |
DIN EN 573-3-1994 |
铝和铝合金.半成品的化学成份和形式.第3部分:化学成份 |
(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition; German version EN 573-3:1994) |
DIN EN 573-4-1994 |
铝和铝合金.半成品的化学成份和形式.第4部分:成品形式 |
(Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products; German version EN 573-4:1994) |
DIN EN 573-4-2004 |
铝和铝合金.锻制品的化学成分和形状.第4部分:产品形状 |
|
DIN EN 574-1997 |
机器的安全性.双手控制装置.功能色灯显示.设计原则 |
(Safety of machinery - Two-hand control devices - Functional aspects; principles for design; German version EN 574:1996) |
DIN EN 575-1995 |
铝和铝合金.通过熔炼生产出的预合金.规范 |
(Aluminium and aluminium alloys - Master alloys produced by melting - Specifications; German version EN 575:1995) |
DIN EN 576-2004 |
铝和铝合金.再熔用非合金铝锭.规范 |
(Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications; German version EN 576:2003) |
DIN EN 576-2004 |
铝和铝合金.再熔用非合金铝锭.规范 |
|
DIN EN 577-1995 |
铝和铝合金.液态金属.规范 |
(Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995) |
DIN EN 578-1993 |
塑料管道系统.塑料管异型件.不透明度的测定 |
(Plastics piping systems; plastics pipes and fittings; determination of the opacity; German version EN 578:1993) |
DIN EN 579-1993 |
塑料管道系统.网状交联聚乙烯管.通过溶剂提取法测定聚合度 |
(Plastics piping systems; crosslinked polyethylene (PE-X) pipes; determination of degree of crosslinking by solvent extraction; German version EN 579:1993) |
DIN EN 58 Bb.1-1986 |
沥青粘合剂取样.签名用的表格纸 |
(Sampling bituminous binders; form for report) |
DIN EN 58-1986 |
沥青粘合剂取样 |
(Sampling bituminous binders) |
DIN EN 58-2004 |
沥青和沥青粘合剂.沥青粘合剂取样 |
|
DIN EN 580-2003 |
塑料管道系统.未增塑聚氯乙烯管.检验规定温度下抗二氯四甲烷的方法 |
(Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT); German version EN 580:2003) |
DIN EN 581-1-1997 |
室外家具.野营区,居住区和商业区用坐椅凳和桌.第1部分:一般安全技术要求 |
(Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements; German version EN 581-1:1997) |
DIN EN 581-3-1999 |
室外家具.野营区、居住区和商业区用坐椅凳和桌.第3部分:桌子的机械安全和试验方法 |
(Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables; German version EN 581-3:1999) |
DIN EN 582-1994 |
热喷涂.粘合抗拉强度的测定 |
(Thermal spraying; determination of tensile adhesive strength; German version EN 582:1993) |
DIN EN 583-1-1998 |
无损检验.超声波检验.第1部分:一般原理 |
(Non-destructive testing - Ultrasonic examination - Part 1: General principles; German version EN 583-1:1998) |
DIN EN 583-2-2001 |
无损检验.超声波检验.第2部分:敏感性和范围设置. |
(Non-destructuve testing - Ultrasonic examination - Part 2: Sensitivity and range setting; German version EN 583-2:2001) |
DIN EN 583-3-1997 |
无损检验.超声波检验.第3部分:超声技术 |
(Non-destructive testing - Ultrasonic testing - Part 3: Transmission technique; German version EN 583-3:1997) |
DIN EN 583-4-2002 |
无损检验.超声波检验.第4部分:垂直与表面的不连续性超声波的检验 |
(Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface; German version EN 583-4:2002) |
DIN EN 583-5-2001 |
无损检验.超声波检验.第5部分:不连续性特性和尺寸确定 |
(Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities; German version EN 583-5:2000) |
DIN EN 584-1-1994 |
无损检验.透视检验用工业胶卷.第1部分:工业透视检验用胶卷分类 |
(Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography; German version EN 584-1:1994) |
DIN EN 584-2-1997 |
无损检验.透视检验用工业胶卷.第2部分:用基准值控制胶卷处理 |
(Non-destructive testing - Industrial radiographic film - Part 2: Control of film processing by means of reference values; German version EN 584-2:1996) |
DIN EN 586-1-1997 |
铝和铝合金.锻件.第1部分:交货技术要求 |
(Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery; German version EN 586-1:1997) |
DIN EN 586-2-1994 |
铝和铝合金.锻件.第2部分:机械性能和其他性能要求 |
(Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements; German version EN 586-2:1994) |
DIN EN 586-3-2002 |
铝和铝合金.锻件.第3部分:尺寸和形状公差 |
(Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German version EN 586-3:2001) |
DIN EN 588-1-1996 |
污水管道用纤维水泥管.第1部分:重力管系统用管,管连接件和管配件 |
(Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems; German version EN 588-1:1996) |
DIN EN 588-2-2002 |
排水管和下水道用纤维水泥管.第2部分:人孔和检查室 |
(Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers; German version EN 588-2:2001) |