标准号 |
中文名称 |
英文名称 |
| EN ISO 8673-2000 |
六角螺母,1型米制细牙螺纹产品等级A和B级 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999) |
| EN ISO 8674-2000 |
六角螺母,2型米制细牙螺纹产品等级A和B级 |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999) |
| EN ISO 8675-2000 |
六角薄螺母(倒角)米制细牙螺纹产品等级A和B级 |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999) |
| EN ISO 8676-2000 |
米制细牙六角头螺钉产品等级A和B级 |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999) |
| EN ISO 868-2003 |
塑料与硬质橡胶用硬度计测定压痕硬度［肖氏(SHORE)硬度］ |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8689-1-2000 |
水质江河中生物的分类第1部分：对底栖微型无脊椎动物调查的生物质量数据的解释方法指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000) |
| EN ISO 8689-2-2000 |
水质江河中生物的分类第2部分：对底栖微型无脊椎动物调查的生物质量数据的表示方法指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000) |
| EN ISO 8692-2004 |
水质.用单细胞绿藻进行淡水藻类生长抑制性试验 |
|
| EN ISO 8728-1998 |
船舶与海上技术船用陀罗罗经 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997) |
| EN ISO 8729-1998 |
船舶与海上技术船用雷达反射器 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997) |
| EN ISO 8733-1997 |
不淬硬钢或奥氏体不锈钢内螺纹圆柱销 |
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997) |
| EN ISO 8734-1997 |
淬硬钢和马氏体不锈钢(定位销)圆柱销 |
Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997) |
| EN ISO 8735-1997 |
淬硬钢或马氏体不锈钢内螺纹圆柱销 |
Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997) |
| EN ISO 8739-1997 |
槽销带导杆及全长平行沟槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997) |
| EN ISO 8740-1997 |
槽销带倒角及全长平行沟槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997) |
| EN ISO 8741-1997 |
槽销半长倒锥槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997) |
| EN ISO 8742-1997 |
槽销中部槽长为1/3全长 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997) |
| EN ISO 8743-1997 |
槽销中部槽长为1/2全长 |
Grooved pins - Half-length centre grooved (ISO 8743:1997) |
| EN ISO 8744-1997 |
槽销全长锥槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997) |
| EN ISO 8745-1997 |
槽销半长锥槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997) |
| EN ISO 8746-1997 |
圆头槽销 |
Grooved pins with round head (ISO 8746:1997) |
| EN ISO 8747-1997 |
沉头槽销 |
Grooved pins with countersunk head (ISO 8747:1997) |
| EN ISO 8748-1997 |
弹性圆柱销卷制、重型 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997) |
| EN ISO 8750-1997 |
弹性圆柱销卷制、标准型 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997) |
| EN ISO 8751-1997 |
弹性圆柱销卷制、轻型 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997) |
| EN ISO 8752-1997 |
弹性圆柱销开槽、重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997) |
| EN ISO 8754-2003 |
石油产品含硫量的测定非扩散型X－射线荧光光谱法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence spectrometry (ISO 8754:2003) |
| EN ISO 8765-2000 |
米制细牙六角头螺栓产品等级A和B级 |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999) |
| EN ISO 877-1996 |
塑料玻璃板下日光暴晒耐老化及性能测定 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| EN ISO 8780-1-1995 |
颜料和体质颜料评定分散性的分散方法第1部分：综述 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990) |
| EN ISO 8780-2-1995 |
颜料和体质颜料评定分散性的分散方法第2部分：用振荡机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990) |
| EN ISO 8780-3-1995 |
颜料和体质颜料评定分散性的分散方法第3部分：用高速粉碎机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990) |
| EN ISO 8780-4-1995 |
颜料和体质颜料评定分散性的分散方法第4部分：用压研磨机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990) |
| EN ISO 8780-5-1995 |
颜料和体质颜料评定分散性的分散方法第5部分：用自动研磨机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990) |
| EN ISO 8780-6-1995 |
颜料和体质颜料评定分散性的分散方法第6部分：用三辕研磨机分散 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990) |
| EN ISO 8781-1-1995 |
颜料和体质颜料分散性评定方法第1部分：有色颜料着色力变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990) |
| EN ISO 8781-2-1995 |
颜料和体质颜料分散性评定方法第2部分：磨碎细度变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990) |
| EN ISO 8781-3-1995 |
颜料和体质颜料分散性评定方法第3部分：光泽变化评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990) |
| EN ISO 8785-1999 |
产品几何量技术规范（GPS）表面缺陷术语、定义和参数 |
Geometrical product specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998) |
| EN ISO 8795-2001 |
人类生活用水输送用塑料管道系统迁移评定塑料管道迁移值的测定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001) |
| EN ISO 8799-1995 |
表面活性剂乙氧基化醇和烷基酚硫酸盐未硫酸化物含量的测定 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988) |
| EN ISO 8819-1995 |
液化石油气硫化氢的测定乙酸铅法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993) |
| EN ISO 8826-1-1995 |
技术制图滚动轴承第1部分：通用简化画法 |
Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO 8826-1:1989) |
| EN ISO 8847-2004 |
小艇.操舵装置.钢索和滑轮系统 |
|
| EN ISO 8849-2003 |
小艇 电动直流舱底泵 |
Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
| EN ISO 887-2000 |
米制普通螺栓、螺钉和螺母用平垫圈总方案 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000) |
| EN ISO 8871-1-2004 |
非肠道及制药设备用弹性件.第1部分:水蒸汽中的提取物 |
|
| EN ISO 8871-2-2004 |
非肠道及制药设备用弹性件.第2部分:识别和表征 |
|
| EN ISO 8871-3-2004 |
非肠道及制药设备用弹性件.第3部分:释放粒子计数的测定 |
|
| EN ISO 8872-2003 |
输血、输液和注射瓶铝盖 一般要求和试验方法 |
Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003) |
| EN ISO 8891-2000 |
贵金属含量至少为25%但不低于75%的牙科用铸造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998) |
| EN ISO 8892-1995 |
油料饼粕残留已烷总量的测定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987) |
| EN ISO 8968-1-2001 |
牛奶含氮量的测定第1部分：凯氏法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001) |
| EN ISO 8968-2-2001 |
牛奶含氮量的测定第2部分：分段溶解法(宏观法) |
Milk - Determination of nitrogen content - Part 2: Block digestion method (Macro method) (ISO 8968-2:2001) |
| EN ISO 8968-4-2001 |
牛奶含氮量的测定第4部分：非蛋白质氮含量的测定 |
Milk - Determination of nitrogen content - Part 4: Determination of non-protein nitrogen content (ISO 8968-4:2001) |
| EN ISO 8968-5-2001 |
牛奶含氮量的测定第5部分：蛋白质氮含量的测定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001) |
| EN ISO 8973-1999 |
液化石油气密度和蒸气压的计算 |
Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997) |
| EN ISO 8974-2002 |
塑料酚醛树脂用气体色谱法测定残余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002) |
| EN ISO 8975-1995 |
塑料酚醛树脂pH值的测定 |
Plastics - Phenolic resins - Determination of pH (ISO 8975:1989) |
| EN ISO 898-1-1999 |
碳钢和铸钢铸造的紧固件机械性能第1部分：螺栓、螺钉和螺柱 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999) |
| EN ISO 898-5-1998 |
碳钢和铸钢铸造的紧固件机械性能第5部分：紧定螺钉及类似的不受拉应力的螺纹紧固件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses (ISO 898-5:1998) |
| EN ISO 898-6-1995 |
紧固件机械性能第6部分：规定保证载荷值的螺母 细牙螺纹 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO 898-6:1994) |
| EN ISO 8980-1-1997 |
眼科光学未切边成品眼镜片第1部分：单焦点和多焦点镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996) |
| EN ISO 8980-1-2004 |
眼科光学.未切边成品眼镜片.第1部分:单焦点和多焦点镜片规范 |
|
| EN ISO 8980-2-1997 |
眼科光学未切边成品眼镜片第2部分：渐变焦镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996) |
| EN ISO 8980-2-2004 |
眼科光学.未切边成品眼镜片.第2部分:渐变焦眼镜片规范 |
|
| EN ISO 8980-3-1999 |
眼科光学未切边成品眼镜片第3部分：透光性规范和试验方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999) |
| EN ISO 8980-4-2000 |
眼科光学未切边成品眼镜片第4部分：防反射涂层的试验方法和规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000) |
| EN ISO 8985-1998 |
塑料乙烯／乙酸乙烯共聚物(EVAC)热塑塑料乙酸乙烯含量的测定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998) |
| EN ISO 8986-1-1999 |
塑料聚丁烯模塑和挤塑材料第1部分：命名体系和基本规范 |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993) |
| EN ISO 8987-1998 |
塑料酚醛树脂在Ｂ转变试验板上的活化性能的测定 |
Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:1995) |
| EN ISO 8988-1997 |
塑料酚醛树脂六次甲基四胺含量的测定凯氏法和过氯酸法 |
Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method (ISO 8988:1995) |
| EN ISO 8989-1998 |
塑料液态酚醛树脂水溶物的测定 |
Plastics - Liquid phenolic resins - Determination of water miscibility (ISO 8989:1995) |
| EN ISO 899-1-2003 |
塑料 蠕变的测定 第1部分：拉伸蠕变 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003) |
| EN ISO 899-2-2003 |
塑料 蠕变的测定 第2部分：用三点负载测定扰屈蠕变 |
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003) |
| EN ISO 8990-1996 |
绝热稳态传热性质的测定校准和防护热箱法 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994) |
| EN ISO 8996-2004 |
热环境的人类工效学.代谢率的测定 |
|
| EN ISO 90-1-1999 |
薄壁金属容器尺寸、容量的定义和测定第1部分：顶开罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997) |
| EN ISO 90-2-1999 |
薄壁金属容器尺寸、容量的定义和测定第2部分：一般用途的容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997) |
| EN ISO 90-3-2001 |
薄壁金属容器尺寸、容量的定义和测定第3部分：喷雾罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000) |
| EN ISO 9000-2000 |
质量管理体系基础和词汇 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000) |
| EN ISO 9000-3-1997 |
质量管理和质量保证标准第3部分：ISO 9001-1994计算机软件的开发、供应、安装和维护应用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software (ISO 9000-3:1997) |
| EN ISO 9001-2000 |
质量管理体系要求 |
Quality management systems - Requirements (ISO 9001:2000) |
| EN ISO 9004-2000 |
质量管理体系业绩改进指南 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000) |
| EN ISO 9013-2002 |
热切割 热切割分类产品几何量规范和质量公差 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002) |
| EN ISO 9020-1998 |
色漆和清漆用粘合剂胺类树脂的游离甲醛含量的测定亚硫酸钠滴定法 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996) |
| EN ISO 9029-1995 |
原油水分的测定蒸馏法 |
Crude petroleum - Determination of water - Distillation method (ISO 9029:1990) |
| EN ISO 9047-2003 |
房屋建筑密封胶变温下的粘合性能的测定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) |
| EN ISO 9054-1999 |
硬质泡沫塑料自结皮高密度材料的试验方法 |
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990) |
| EN ISO 9073-2-1996 |
纺织品非织造布试验方法第2部分：厚度的测定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (EN ISO 9073-2:1995) |
| EN ISO 9073-4-1997 |
纺织品非织造布试验方法第4部分：抗撕裂的测定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) |
| EN ISO 9073-6-2003 |
纺织品非织造布试验方法第6部分：吸水性(注解：认可通知) |
Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) |
| EN ISO 9073-7-1998 |
纺织品非织造布试验方法第7部分：弯曲长度的测定 |
Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995) |
| EN ISO 9073-8-1998 |
纺织品非织造布试验方法第8部分：液体渗透时间的测定(模拟尿) |
Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| EN ISO 9073-9-1998 |
纺织品非织造布试验方法第9部分：悬垂系数的测定 |
Textiles - Test methods for nonwovens - Part 9: Determination of drape coefficient (ISO 9073-9:1995) |
| EN ISO 9080-2003 |
塑料管与管道系统用推断法测定热塑管型材料长期流动液体静力强度 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003) |
| EN ISO 9093-1-1997 |
小艇通海旋塞及贯穿艇体配件第1部分：金属的配件 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
| EN ISO 9093-2-2002 |
小艇通海旋塞及贯穿艇体配件第2部分：非金属的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
| EN ISO 9094-1-2003 |
小艇防火第1部分：船长≤15米的小艇 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003) |
| EN ISO 9094-2-2002 |
小艇防火第2部分：船长〈15米的小艇 |
Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002) |
| EN ISO 9163-1998 |
纺织玻璃纤维粗纱试样的制备和浸渍粗纱拉伸强度的测定 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996) |
| EN ISO 9167-1-1995 |
菜籽芥子油工甙含量的测定第1部分：高效液相色谱法 |
Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performamce liquid chromatography (ISO 9167-1:1992) |
| EN ISO 9167-2-1997 |
菜籽芥子油工甙含量的测定第2部分：用X－射线荧光光谱法 |
Rapeseed - Determination of glucosinolates content - Part 2: Method using X-ray fluorescence spectrometry (ISO 9167-2:1994) |
| EN ISO 9173-1-1995 |
拔牙钳第1部分：螺钉和铰链接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) |
| EN ISO 9187-1-2003 |
医用注射器具第1部分：注射安瓿 |
Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2000) |
| EN ISO 9220-1994 |
金属覆盖层镀层厚度测量扫描电子显微镜法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 9222-1-1995 |
技术制图动密封应用第1部分：通用简化画法 |
Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989) |
| EN ISO 9222-2-1994 |
技术制图动密封应用第2部分：简化画法 |
Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation (ISO 9222-2:1989) |
| EN ISO 9237-1995 |
纺织品织物透气性的测定 |
Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
| EN ISO 9239-1-2002 |
地板对火反应试验第1部分：使用单辐射热源的火焰性能测定 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002) |
| EN ISO 9241-10-1996 |
办公用视觉显示终端(VDTs)的人类工效学要求第10部分：对话原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996) |
| EN ISO 9241-11-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第11部分：可用性指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
| EN ISO 9241-12-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第12部分：信息表达 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998) |
| EN ISO 9241-13-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第13部分：用户指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998) |
| EN ISO 9241-14-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第14部分：菜单对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997) |
| EN ISO 9241-15-1997 |
办公用视觉显示终端(VDTs)的人类工效学要求第15部分：命令对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
| EN ISO 9241-16-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第16部分：直接处理对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues (ISO 9241-16:1999) |
| EN ISO 9241-17-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第17部分：填表对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998) |
| EN ISO 9241-5-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第5部分：工作台布置及位置要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) |
| EN ISO 9241-6-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第6部分：工作环境指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com