标准号 |
中文名称 |
英文名称 |
EN 763-1994 |
塑料管道和导管系统 喷射铸模热塑型配件 外观检查加热效果的试验方法 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating |
EN 764-1-2004 |
压力设备.第1部分:术语.压力、温度、容积和标称尺寸 |
|
EN 764-1994 |
压力设备 术语和符号 压力、温度和体积 |
Pressure equipment - Terminology and symbols - Pressure, temperature, volume |
EN 764-2-2002 |
压力设备 第2部分:量、符号和单位 |
Pressure equipment - Part 2: Quantities, symbols and units |
EN 764-3-2002 |
压力设备 第3部分:各零件的定义 |
Pressure equipment - Part 3: Definition of parties involved |
EN 764-4-2002 |
压力设备 第4部分:金属材料技术交货条件的建立 |
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
EN 764-5-2002 |
压力设备 第5部分:材料合格和检验文件 |
Pressure equipment - Part 5: Compliance and inspection documentation of materials |
EN 764-7-2002 |
压力设备 第7部分:不着火的压力设备的安全系统 |
Pressure equipment - Part 7: Safety systems for unfired pressure equipment |
EN 765-1994 |
食品运输袋 聚丙烯之外的其它聚烯烃编织袋 |
Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only |
EN 766-1994 |
食品运输袋 黄麻纤维编织袋 |
Sacks for the transport of food aid - Sacks made of jute fabric |
EN 767-1994 |
食品运输袋 黄麻/聚烯烃混合织物编织袋 |
Sacks for the transport of food aid - Sacks made of woven jute/polyolefin fabric |
EN 768-1994 |
食品运输袋 内衬的棉织物的编织袋 |
Sacks for the transport of food aid - Sacks made of lined cotton fabric |
EN 769-1994 |
食品运输袋 棉和聚烯烃混合编织袋 |
Sacks for the transport of food aid - Sacks made of woven cotton/polyolefine fabric |
EN 770-1994 |
食品运输袋 纸袋 |
Sacks for the transport of food aid - Paper sacks |
EN 771-1-2003 |
砌块规范 第1部分:粘土砌块 |
Specification for masonry units - Part 1: Clay masonry units |
EN 771-2-2003 |
砌块规范 第2部分:硅酸钙砌块 |
Specification for masonry units - Part 2: Calcium silicate masonry units |
EN 771-3-2003 |
砌块规范 第3部分:聚合混凝土砌块(密集和轻质聚合) |
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) |
EN 771-4-2003 |
砌块规范 第4部分:热处理过的加气混凝土砌块 |
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units |
EN 771-6-2000 |
砌块规范 第6部分:天然石料砌块 |
Specification for masonry units - Part 6: Natural stone masonry units |
EN 772-1-2000 |
砌块的试验方法 第1部分:压缩强度的测定 |
Methods of test for masonry units - Part 1: Determination of compressive strength |
EN 772-10-1999 |
砌块的试验方法 第10部分:硅酸钙和热处理过的加气混凝土中水分含量的测定 |
Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units |
EN 772-11-2000 |
砌块的试验方法 第11部分:由于粘土砌块表面张力作用和初始吸水率引起的聚合混凝土、人造石料和天然石料砌 |
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
EN 772-11-2004 |
砌块的试验方法.第11部分:集料混凝土、高压蒸养加气混凝土、人造石和天然石砌块因毛细作用的吸水率及粘土砌块初始吸水率的测定 |
|
EN 772-13-2000 |
砌块的试验方法 第13部分:砌块净密度和毛干密度的测定(天然石除外) |
Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone) |
EN 772-14-2001 |
砌块的试验方法 第14部分:聚合混凝土和人造石料砌块的湿度变化的测定 |
Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units |
EN 772-15-2000 |
砌块的试验方法 第15部分:热压处理过的加气混凝土砌块水蒸汽渗透性的测定 |
Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units |
EN 772-16-2000 |
砌块的试验方法 第16部分:尺寸的测定 |
Methods of test for masonry units - Part 16: Determination of dimensions |
EN 772-18-2000 |
砌块的试验方法 第18部分:硅酸钙砌块抗冷冻-融化性的测定 |
Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units |
EN 772-19-2000 |
砌块的试验方法 第19部分:大型水平穿孔粘土砌块湿度扩张性的测定 |
Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units |
EN 772-2-1998 |
砌块的试验方法 第2部分:聚合混凝土砌块的孔隙面积百分率的确定(纸压痕法) |
Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation) |
EN 772-20-2000 |
砌块的试验方法 第20部分:聚合混凝土、人造石料和天然石料砌块表面平面度的测定 |
Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units |
EN 772-3-1998 |
砌块的试验方法 第3部分:流体静态称重法测定粘土砌块的孔隙百分率和净体积 |
Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing |
EN 772-4-1998 |
砌块的试验方法 第4部分:测定天然石料的真实密度和堆积密度(松装密度)以及总孔隙率和开放孔隙率 |
Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units |
EN 772-5-2001 |
砌块的试验方法 第5部分:粘土砌块活性可溶解盐含量的测定 |
Methods of test for masonry units - Part 5: Determination of the active soluble salt content of clay masonry units |
EN 772-6-2001 |
砌块的试验方法 第6部分:聚合混凝土砌块的弯曲抗张强度的测定 |
Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units |
EN 772-7-1998 |
砌块的试验方法 第7部分:通过水沸腾对粘土砌块防潮层水吸收的测定 |
Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water |
EN 772-9-1998 |
砌块的试验方法 第9部分:通过添加盐对硅酸钙砌块净体积、孔隙百分率和体积的测定 |
Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling |
EN 773-1999 |
液压排放管、排水管和污水管构件的一般要求 |
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
EN 774-1996 |
花园设备 手提式电动篱笆修剪机 安全 |
Garden equipment - Hand held, integrally powered hedge trimmers - Safety |
EN 779-2002 |
一般通风用微粒空气过滤器 过滤能力测定 |
Particulate air filters for general ventilation - Determination of the filtration performance |
EN 786-1996 |
花园设备 电动步行手扶剪草机和草地修边机 机械安全 |
Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety |
EN 787-1994 |
食品运输袋 聚乙烯薄膜袋. |
Sacks for the transport of food aid - Sacks made of polyethylene film |
EN 788-1994 |
食品运输袋 复合薄膜管状袋 |
Sacks for the transport of food aid - Tubular sacks made of composite film |
EN 789-1995 |
木材结构 试验方法 木基板力学性能的测定 |
Timber structures - Test methods - Determination of mechanical properties of wood based panels |
EN 789-2004 |
木结构.试验方法.木基板材机械特性的测定 |
|
EN 790-2001 |
内河运输船 45°至60°倾斜角楼梯 要求、类型 |
Inland navigation vessels - Stairs with inclination angles of 45?to 60?- Requirements, types |
EN 791-1995 |
钻机 安全 |
Drill rigs - Safety |
EN 792-1-2000 |
手持式非电动工具 安全要求 第1部分:非螺纹机械紧固件用组装动力工具 |
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners |
EN 792-10-2000 |
手持式非电动工具 安全要求 第10部分:压缩动力工具 |
Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools |
EN 792-11-2000 |
手持式非电动工具 安全要求 第11部分:毛坯下料机和剪切机 |
Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears |
EN 792-12-2000 |
手持式非电动工具 安全要求 第12部分:小循环、小振荡和往复式锯 |
Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws |
EN 792-13-2000 |
手持式非电动工具 安全要求 第13部分:紧固件传动工具 |
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
EN 792-2-2000 |
手持式非电动工具 安全要求 第2部分:切割和卷边动力工具 |
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools |
EN 792-3-2000 |
手持式非电动工具 安全要求 第3部分:钻孔机和攻丝机 |
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers |
EN 792-4-2000 |
手持式非电动工具 安全要求 第4部分:非旋转冲击动力工具 |
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools |
EN 792-5-2000 |
手持式非电动工具 安全要求 第5部分:旋转式冲击钻孔机 |
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills |
EN 792-6-2000 |
手持式非电动工具 安全要求 第6部分:螺纹紧固件用组装动力工具 |
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners |
EN 792-7-2001 |
手持式非电动工具 安全要求 第7部分:研磨机 |
Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
EN 792-8-2001 |
手持式非电动工具 安全要求 第8部分:抛光机和磨沙机 |
Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
EN 792-9-2001 |
手持式非电动工具 安全要求 第9部分:硬模研磨机 |
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
EN 793-1997 |
医疗供应设备安全的特殊要求 |
Particular requirements for safety of medical supply units |
EN 794-2-1997 |
肺呼吸器 第2部分:家庭看护用呼吸器的特殊要求 |
Lung ventilators - Part 2: Particular requirements for home care use |
EN 794-3-1998 |
肺呼吸器 第3部分:紧急和移动呼吸器的特殊要求 |
Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators |
EN 796-1995 |
条形码 码标识符 |
Bar coding - Symbology identifiers |
EN 799-1995 |
条形码 码规范 “128码” |
Bar coding - Symbology specifications - Code 128 |
EN 80-2001 |
壁挂式小便池 连接尺寸 |
Wall-hung urinals - Connecting dimensions |
EN 800-1995 |
条形码 码规范 “39码” |
Bar coding - Symbology specifications - Code 39 |
EN 801-1995 |
条行码 码规范 “交插25码” |
Bar coding - Symbology specifications - Interleaved 2 of 5 |
EN 802-1994 |
塑料管道和导管系统 压力管道系统的喷射铸造热塑性部件 挤压最大变形试验方法 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing |
EN 803-1994 |
塑料管道系统 压力管道的弹性密封环状连接的喷射铸造热塑性部件 无轴向推力的瞬时内压阻力试验方法 |
Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust |
EN 804-1994 |
塑料管道系统 压力管道溶焊接头的喷射铸造插接部件 瞬时内部液压阻力的试验方法 |
Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
EN 80416-1-2001 |
设备用图形符号基本原则第1部分:原始符号创造 |
Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals (IEC 80416-1:2001) |
EN 80416-2-2001 |
设备用图形符号基本原则第2部分:箭头的形成和使用 |
Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows (ISO 80416-2:2001) |
EN 80416-3-2002 |
设备用图形符号基本原则第3部分:图形符号应用指南 |
Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002) / Note: Endorsement notice |
EN 805-2000 |
供水 建筑物外部系统和部件的要求 |
Water supply - Requirements for systems and components outside buildings |
EN 81-1/A2-2004 |
升降机施工和安装的安全规则.第1部分:电动升降机.A2:机械和滑轮间隔 |
|
EN 81-1/prA1-2003 |
电梯建造和安装的安全规则 第1部分:电梯 修改A1 |
Safety rules for the construction and installation of lifts - Part 1: Electric lifts; Amendment A1 / Note: Intended as an amendment to EN 81-1 (1998-08). |
EN 81-1/prA2-2000 |
电梯建造和安装的安全规则 第1部分:电梯 修改A2:机械和滑轮空间 |
Safety rules for the construction and installation of lifts - Part 1: Electric lifts; A2: Machinery and pulley spaces |
EN 81-2/A2-2004 |
升降机施工和安装的安全规则.第2部分:液压升降机.A2:机械和滑轮间隔 |
|
EN 81-2/prA1-2003 |
电梯建造和安装的安全规则 第2部分:液压梯 修改A1 |
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; Amendment A1 / Note: Intended as an amendment to EN 81-2 (1998-08). |
EN 81-2/prA2-2000 |
电梯建造和安装的安全规则 第2部分:液压梯 修改A2:机械和滑轮空间 |
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; A2: Machinery and pulley spaces |
EN 81-28-2003 |
电梯建造和安装的安全规则 客运和货运电梯 第28部分:客运和货运电梯上的远程警报器 |
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts |
EN 81-3-2000 |
电梯建造和安装的安全规则 第3部分:电和液压维修电梯 |
Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts |
EN 81-58-2003 |
电梯建造和安装的安全规则 试验和检查 第58部分:乘载门的耐火试验 |
Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test |
EN 81-70-2003 |
电梯建造和安装的安全规则 客运和货运电梯的特殊使用 第70部分: 人(包括残疾人)进入电梯的易用性 |
Safety rules for the construction and installations of lifts - Particular applications for passenger and good passenger lifts - Part 70: Accessibility to lifts for persons including persons with disability |
EN 81-70-2004 |
电梯建造和安装的安全规则.客梯及客货两用梯的特殊应用.第70部分:电梯对包括残疾人在内的所有人员的可达性 |
|
EN 81-72-2003 |
电梯建造和安装的安全规则 客运和货运电梯的特殊使用 第72部分:消防队员梯 |
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts |
EN 810-1997 |
电动压缩机用的减湿器 额定试验、标志、操作要求及技术数据表 |
Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet |
EN 811-1996 |
机械安全 防止被下肢碰撞的危险区安全距离 |
Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs |
EN 813-1997 |
防止从高处坠落的个人保护设备 座式吊带 |
Personal protective equipment for prevention of falls from a height - Sit harnesses |
EN 814-1-1997 |
带有电驱动压缩机的热泵和空调器 制冷模型 第1部分:术语、定义和名称 |
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations |
EN 814-2-1997 |
带有电驱动压缩机的热泵和空调器 制冷模型 第2部分:测试和标志要求 |
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking |
EN 814-3-1997 |
带有电驱动压缩机的热泵和空调器 制冷模型 第3部分:要求 |
Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 3: Requirements |
EN 815-1996 |
岩石用未掩蔽的隧道掘进钻探设备和无杆钻井机的安全 |
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock |
EN 816-1996 |
卫生间水开关制品 自动切断阀PN 10 |
Sanitary tapware - Automatic shut-off valves PN 10 |
EN 817-1997 |
卫生间水开关制品 机械混合器(PN10) 一般技术规范 |
Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications |
EN 81714-2-1998 |
产品技术文件用图形符号的设计第2部分:用于计算机敏感性、包括用于参考书图书馆的图形符号规范和它们交 |
Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange (IEC 8171 |
EN 81714-3-2001 |
产品技术文件用图形符号的设计第3部分:连接节点、网络及其编码的分类 |
Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding (IEC 81714-3:1998) |
EN 818-2-1996 |
提升用短节链条 安全 第2部分:吊链用中等公差链条 等级8 |
Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
EN 818-3-1999 |
提升用短节链条 安全 第3部分: 吊链用中等公差链条 等级4 |
Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
EN 818-4-1996 |
提升用短节链条 安全 第4部分:吊链 等级8 |
Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
EN 818-5-1999 |
提升用短节链条 安全 第5部分:吊链 等级4 |
Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
EN 818-6-2000 |
提升用短节链条 安全 第6部分:吊链 生产商提供的使用和维护的信息规范 |
Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
EN 818-7-2002 |
提升用短节链条 安全 第7部分:精密公差吊链 等级T(类型T、DAT和DT) |
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
EN 820-1-2002 |
先进技术陶瓷 单片陶瓷试验方法 热机械性能 第1部分:升温时弯曲强度的测定 |
Advanced technical ceramics - Method of testing monolithic ceramics; Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures |
EN 820-2-2003 |
先进技术陶瓷 单片陶瓷试验方法 热机械性能 第2部分:自加载变形的测定 |
Advanced technical ceramics - Methods of testing for monolithic ceramics; Thermo-mechanical properties - Part 2: Determination of self-loaded deformation |
EN 820-3-2004 |
高级工业陶瓷.块体陶瓷的试验方法.热机械特性.第3部分:水淬火法测定耐热冲击性 |
|
EN 82045-1-2001 |
文件管理第1部分:原则和方法 |
Document management - Part 1: Principles and methods (IEC 82045-1:2001) |
EN 821-1-1995 |
先进技术陶瓷 单片陶瓷 热物理特性 第1部分:热膨胀率的测定 |
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion |
EN 821-2-1997 |
先进技术陶瓷 单片陶瓷 热物理特性 第2部分:激光闪烁法(热脉冲法)对热扩散率的测定 |
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
EN 822-1994 |
建筑用绝热产品 长度和宽度的测定 |
Thermal insulating products for building applications - Determination of length and width |
EN 823-1994 |
建筑用绝热产品 厚度的测定 |
Thermal insulating products for building applications - Determination of thickness |
EN 824-1994 |
建筑用绝热产品 垂直度的测定 |
Thermal insulating products for building applications - Determination of squareness |
EN 825-1994 |
建筑用绝隔热产品 平面度的测定 |
Thermal insulating products for building applications - Determination of flatness |
EN 826-1996 |
建筑用绝热产品 压缩性测定 |
Thermal insulating products for building applications - Determination of compression behaviour |
EN 827-1994 |
胶粘剂 常规固体含量和单位质量固体含量的测定 |
Adhesives - Determination of conventional solids content and constant mass solids content |
EN 828-1997 |
胶粘剂 湿润度 通过对固体表面临界表面张力和接触角度的测量值来确定 |
Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface |
EN 829-1996 |
玻璃试管内的诊断系统 医学和生物试样的传送包装 要求、试验 |
In vitro diagnostic systems - Transport packages for medical and biological specimens - Requirements, tests |
EN 832-1998 |
建筑物的热性能 供热用热能的计算 住宅 |
Thermal performance of buildings - Calculation of energy use for heating - Residential buildings |
EN 834-1994 |
测定房间加热散热器消耗用的热消耗分配器 带电能源的器具 |
Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply |