标准号 |
中文名称 |
英文名称 |
EN 14155-2003 |
煤分解的衍生物 碳黑原料 规范和试验方法 |
Derivates from coal pyrolysis - Carbon black feedstocks - Specifications and test methods |
EN 14156-2003 |
煤分解的衍生物煤焦油基油: 煤焦油燃料 规范和试验方法 |
Derivates from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
EN 14157-2004 |
天然石料试验方法.耐磨性的测定 |
|
EN 14158-2004 |
天然石料试验方法.破裂力的测定 |
|
EN 1416-1996 |
接触闭合扣锁 曲率的测定 |
Touch and close fasteners - Determination of curvature |
EN 14160-2001 |
航天工程 软件 |
Space engineering - Software |
EN 14163-2001 |
石油和天然气工业 管道运输系统 管道的焊接 |
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified) |
EN 14165-2004 |
空间工程标准.断裂控制 |
|
EN 1417-1996 |
橡胶和塑料加工机器 双辊式破碎机 安全要求 |
Rubber and plastics machines - Two roll mills - Safety requirements |
EN 14173-2002 |
建筑用粘合剂 挠性粘合组件的T-剥离试验 |
Structural adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:1993 modified) |
EN 14175-1-2003 |
通风橱 第1部分: 词汇 |
Fume cupboards - Part 1: Vocabulary |
EN 14175-2-2003 |
通风橱 第2部分:安全和性能要求 |
Fume cupboards - Part 2: Safety and performance requirements |
EN 14175-4-2004 |
通风柜.第4部分:现场试验方法 |
|
EN 14178-1-2004 |
建筑物用玻璃.基本碱土硅酸盐玻璃制品.第1部分:浮法玻璃 |
|
EN 14178-2-2004 |
建筑物用玻璃.基本碱土硅酸盐玻璃制品.第2部分:合格评价/产品标准 |
|
EN 1418-1997 |
焊接人员 设定完全机械化和自动化金属材料焊接的熔焊和阻焊的焊接操作者的批准测试 |
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
EN 14180-2003 |
医疗用消毒器 甲醛和低温蒸气消毒器 试验和要求 |
Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
EN 14181-2004 |
固定源辐射.自动测量系统的质量保证 |
|
EN 14182-2002 |
包装 术语 基本术语和定义 |
Packaging - Terminology - Basic terms and definitions |
EN 14184-2003 |
水质 流动水中生长的大型水生栖植物观测的标准指南 |
Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters |
EN 14185-1-2003 |
非油脂食品 N-氨基甲酸甲酯残留量的测定第1部分:用SPE完成的高效液相色谱法 |
Non fatty foods - Determination of N-methylcarbamate residues - Part 1: HPLC-method with SPE clean-up |
EN 14187-1-2003 |
低温用接缝密封剂 第1部分:凝固速率测定的试验方法 |
Cold applied joint sealants - Part 1: Test method for the determination of the rate of cure |
EN 14187-2-2003 |
低温用接缝密封剂第2部分:消耗时间测定的试验方法 |
Cold applied joint sealants - Part 2: Test method for the determination of tack free time |
EN 14187-3-2003 |
低温用接缝密封剂 第3部分: 自均涂性测定的试验方法 |
Cold applied joint sealants - Part 3: Test method for the determination of self-levelling properties |
EN 14187-4-2003 |
低温用接缝密封剂 第4部分:在试验燃料中浸渍后质量和体积变化测定的试验方法 |
Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel |
EN 14187-5-2003 |
低温用接缝密封剂 第5部分:抗水解性测定的试验方法 |
Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis |
EN 14187-6-2003 |
低温用接缝密封剂 第6部分:在化学溶液中浸渍后粘着力/粘合力特性测定的试验方法 |
Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids |
EN 14187-7-2003 |
低温用接缝密封剂 第7部分:耐火性测定的试验方法 |
Cold applied joint sealants - Part 7: Test method for the determination of resistance to flame |
EN 14187-8-2003 |
低温用接缝密封剂 第8部分:用紫外线照射法进行人工风化测定的试验方法 |
Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation |
EN 14188-1-2004 |
接缝填充物和密封胶.第1部分:热用密封胶的规范 |
|
EN 14189-2003 |
可运输气瓶 气瓶定期检查时对瓶阀的检查和维护 |
Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders |
EN 14197-1-2003 |
低温容器 静态非真空隔热容器 第1部分:基本要求 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements |
EN 14197-3-2004 |
低温容器.静压非真空绝热容器.第3部分:操作要求 |
|
EN 142-2002 |
呼吸保护装置 口罩 要求、测试、标志 |
Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking |
EN 1420-1-1999 |
有机材料对民用水的影响 管道系统中水气味的测定 第1部分:试验方法 |
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method |
EN 14200-2004 |
铁路设施.悬挂组件.钢制抛物线形弹簧 |
|
EN 14201-2004 |
遮帘和百叶窗.耐反复操作性(机械耐久性).试验方法 |
|
EN 14202-2004 |
遮帘和百页窗.管状和方形遮帘和百页窗机械化使用的适用性.要求和试验方法 |
|
EN 14203-2004 |
遮帘和百叶窗.带手摇曲柄的齿轮使用能力.要求和试验方法 |
|
EN 14204-2004 |
化学抗菌剂和防腐剂.评价兽医领域用化学抗菌剂和防腐剂的分枝杆菌科活性的定量悬浮试验.试验方法和要求(阶段2,步骤1) |
|
EN 14206-2003 |
内航船只 客船舷梯 要求、试验 |
Inland navigation vessels - Gangways for passenger vessels - Requirements, tests |
EN 14207-2003 |
水质 表氯醇的测定 |
Water quality - Determination of epichlorohydrin |
EN 14208-2004 |
可运输气瓶.气体运输用容量在1000升及以下的焊接压力鼓形物的规范 |
|
EN 1421-1996 |
民用水处理用化学品 氯化铵 |
Chemicals used for treatment of water intended for human consumption - Ammonium chloride |
EN 14213-2003 |
供暖燃料 脂肪酸甲酯(FAME) 要求和试验方法 |
Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods |
EN 14214-2003 |
车用燃料 柴油机用脂肪酸甲酯(FAME) 试验方法和要求 |
Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods |
EN 14215-2003 |
纺织品地板覆盖物机织软绒面地毯和长地毯的分类 |
Textile floor coverings - Classification of machine-made pile rugs and runners |
EN 14216-2004 |
水泥.超低热特种水泥的组分、规范和合格准则 |
|
EN 14218-2003 |
法兰用六角螺母 细牙螺纹 |
Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) |
EN 14219-2003 |
带有公制细齿节螺纹法兰的六角螺母 小系列 |
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) |
EN 1422-1997 |
医用灭菌器 环氧乙烷灭菌器 要求和试验方法 |
Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
EN 14222-2003 |
不锈钢火管锅炉 |
Stainless steel shell boilers |
EN 14227-1-2004 |
液力粘结混合物.规范.第1部分:水泥粘结粒状混合物 |
|
EN 14227-2-2004 |
液力粘合混合料.规范.第2部分:矿渣粘合混合料 |
|
EN 14227-3-2004 |
液力粘结混合物.规范.第3部分:飞灰粘结混合物 |
|
EN 14227-4-2004 |
液力粘结混合物.规范.第3部分:液力粘结混合物用飞灰 |
|
EN 14227-5-2004 |
液力粘结混合物.规范.第5部分:液力道路粘合剂粘结混合物 |
|
EN 14231-2003 |
天然石材试验方法 用摆锤试验器测定防滑性 |
Natural stone test methods - Determination of the slip resistance by means of the pendulum tester |
EN 14233-2002 |
与食物接触的材料和物品 塑料 为进行迁移试验选择适当温度在微波炉或传统炉加热过程中,塑料/食物接触面 |
Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature fo |
EN 14238-2004 |
起重机.手工控制加载操作设备 |
|
EN 14239-2004 |
建筑物通风.管道系统.管道系统表面积的测量 |
|
EN 14240-2004 |
建筑物通风.冷凝天花板.试验和等级 |
|
EN 14242-2004 |
铝和铝合金.化学分析.电感耦合等离子体光学发射光谱分析 |
|
EN 1425-1999 |
沥青和沥青粘合剂 感观性能的特征 |
Bitumen and bituminous binders - Characterization of perceptible properties |
EN 14250-2004 |
木制结构.装配有穿孔金属板紧固件的预制结构构件的生产要求 |
|
EN 14254-2004 |
体外诊断医疗装置.收集来自于人体的试样(血液除外)用一次性容器 |
|
EN 14258-2004 |
结构胶粘剂.短期和长期暴露在特定温度条件下的胶粘连接件的机械性能 |
|
EN 1426-1999 |
沥青和沥青粘合剂 针穿透深度的测定 |
Bitumen and bituminous binders - Determination of needle penetration |
EN 14260-2003 |
煤高温分解的衍生物煤焦油和沥青基胶粘剂及相关产品:筑路焦油 特性和试验方法 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Road tars - Characteristics and test methods |
EN 14261-2003 |
煤高温分解的衍生物煤焦油和沥青基胶粘剂及相关产品:难熔胶粘剂特性和试验方法 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Refractory binders - Characteristics and test methods |
EN 14262-2003 |
煤高温分解的衍生物煤焦油和沥青基胶粘剂及相关产品:块状沥青 特性和试验方法 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Briquetting pitch - Characteristics and test methods |
EN 14263-2003 |
煤高温分解的衍生物煤焦油和沥青基胶粘剂及相关产品:碳胶结沥青 特性和试验方法 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Carbon binder pitch - Characteristics and test methods |
EN 14264-2003 |
煤高温分解的衍生物煤焦油和沥青基胶粘剂及相关产品:浸渍沥青 特性和试验方法 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Impregnating pitch - Characteristics and test methods |
EN 14265-2003 |
煤高温分解的衍生物煤焦油和沥青基胶粘剂及相关产品:涂抹焦油 特性和试验方法 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Painting tar - Characteristics and test methods |
EN 14266-2003 |
煤高温分解的衍生物煤焦油和沥青基胶粘剂及相关产品:涂层焦油 特性和试验方法 |
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Coating tar - Characteristics and test methods |
EN 14267-2004 |
灌溉技术.灌溉给水栓 |
|
EN 1427-1999 |
沥青和沥青粘合剂 软化点的测定 圆环法和圆球法 |
Bitumen and bituminous binders - Determination of the softening point - Ring and ball method |
EN 14274-2003 |
汽车用燃料 汽油和柴油质量的评定 燃料质量监测系统 |
Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) |
EN 14275-2003 |
汽车燃料 汽油和柴油燃料质量的评定 从零售泵和商品燃料售货机取样 |
Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
EN 14278-1-2004 |
纺织品.棉纤维黏性的测定.第1部分:使用手工热检测设备的方法 |
|
EN 14278-2-2004 |
纺织品.棉纤维黏性的测定.第2部分:使用自动热检波板设备的方法 |
|
EN 14278-3-2004 |
纺织品.棉纤维黏性的测定.第3部分:使用自动热检波旋转鼓设备的方法 |
|
EN 1428-1999 |
沥青和沥青粘合剂 沥青乳剂中水分含量的测定 共沸点蒸馏法 |
Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method |
EN 14286-2004 |
铝和铝合金.储存和运输危险货物的罐用可焊接轧制产品 |
|
EN 14287-2004 |
铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求 |
|
EN 1429-1999 |
沥青和沥青粘合剂 沥青乳化剂筛渣的测定及筛法测定堆积稳定性 |
Bitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions, and determination of storage stability by sieving |
EN 14290-2004 |
锌和锌合金.二次原料 |
|
EN 14291-2004 |
燃气装置上检漏用发泡溶液 |
|
EN 14294-2004 |
皮革和鞋靴材料用胶粘剂.通过制模工艺进行粘结试验件的制备 |
|
EN 14297-2004 |
烟囱.烟囱产品的抗冻-融试验方法 |
|
EN 14298-2004 |
锯材.干燥质量的评定 |
|
EN 14299-2004 |
非活性外科植入物.心脏和血管植入物的特殊要求.动脉斯滕特固定模的特殊要求 |
|
EN 143-2000 |
呼吸保护装置 微粒过滤器 要求、测试、标志 |
Respiratory protective devices - Particle filters - Requirements, testing, marking |
EN 1430-1999 |
沥青和沥青粘合剂 沥青乳剂颗粒极性的测定 |
Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions |
EN 143000-1991 |
通用规范:热敏电阻器 |
Generic specification: thermistors |
EN 143001-1991 |
空白详细规范:直热式负温度系数热敏电阻器(固态玻璃或搪瓷玻璃中的水珠) |
Blank detail specification: directly heated negative temperature coefficient thermistors (beads in solid glass or vitreous enamel) |
EN 143002-1991 |
空白详细规范:直热式负温度系数热敏电阻器(泡形珠) |
Blank detail specification: directly heated negative temperature coefficient thermistors (beads in envelopes) |
EN 143003-1991 |
空白详细规范:直热式负温度系数热敏电阻器(盘形) |
Blank detail specification: directly heated negative temperature coefficient thermistors (disk type) |
EN 143004-1991 |
空白详细规范:直热式负温度系数热敏电阻器(棒形) |
Blank detail specification: directly heated negative temperature coefficient thermistors (rod type) |
EN 1431-1999 |
沥青和沥青粘合剂 通过蒸馏法测定从沥青乳剂中回收的粘合剂和油蒸馏物 |
Bitumen and bituminous binders - Determination of recovered binder and oil distillate from bitumen emulsions by distillation |
EN 14316-1-2004 |
建筑物的热绝缘产品.膨胀珍珠岩制品的现场热绝缘成形.第1部分:粘结和松填装产品的安装前规范 |
|
EN 14317-1-2004 |
建筑物的热绝缘产品.片状蛭石产品的现场热绝缘成形.第1部分:粘结和松填装产品的安装前规范 |
|
EN 1432-1997 |
交换体 交换箱 规格、要求、试验方法、操作条件 |
Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions |
EN 14322-2004 |
木基板材.内部用三聚氰胺面板.定义、要求和分类 |
|
EN 14323-2004 |
木基板材.内部用三聚氰胺面板.试验方法 |
|
EN 14324-2004 |
钎焊.钎焊连接件的应用指南 |
|
EN 14325-2004 |
化学防护服.化学防护服材料、接缝、接头及总体的试验方法和性能分类 |
|
EN 14329-2004 |
内河航运船舶.停泊处和装载区域的装配 |
|
EN 1433-2002 |
车辆和人行区域的排水渠道分类、设计和试验要求 标志和符合性评估 |
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
EN 14331-2004 |
液态石油产品.中间馏出材料中脂肪酸甲脂的分离和表征.液相色谱法/气相色谱法 |
|
EN 14332-2004 |
食品.痕量素的测定.用微波溶解后的石墨炉原子吸收光谱法测定海产品中的砷 |
|
EN 14333-1-2004 |
无脂食品.苯并咪唑杀菌剂carbendazim、噻唑苯并咪唑和苯菌灵的测定.第1部分:固相淬取清洁HPLC法 |
|
EN 14333-2-2004 |
无脂食品.苯并咪唑杀菌剂carbendazim、噻唑苯并咪唑和苯菌灵的测定.第2部分:凝胶渗胶透色谱清洁HPLC法 |
|
EN 14333-3-2004 |
无脂食品.苯并咪唑杀菌剂carbendazim、噻唑苯并咪唑和苯菌灵的测定.第3部分:液/液分离清洁HPLC法 |
|
EN 14336-2004 |
建筑物取暖系统.水基取暖系统的安装和交付使用 |
|
EN 1434-3-1997 |
热量表 第3部分:数据交换和接口 |
Heat meters - Part 3: Data exchange and interfaces |
EN 1434-6-1997 |
热量表 第6部分:安装、使用、操作监控和维护 |
Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance |
EN 14340-2004 |
皮革.物理和机械试验.外衣皮革的防水性测定 |
|
EN 14344-2004 |
儿童用护理用品.自行车用儿童座椅.安全要求和试验方法 |
|
EN 14345-2004 |
废弃物的表征.用重量测定法测定烃类的含量 |
|