标准号 |
中文名称 |
英文名称 |
| DIN EN 13675-2004 |
机械安全.管成形、辊轧及其精整线设备的安全要求 |
|
| DIN EN 13676-2001 |
与食品接触的聚合物涂覆的纸和纸板.针孔的检测 |
(Polymer coated paper and board intended for food contact - Detection of pinholes; German version EN 13676:2001) |
| DIN EN 13677-1-2003 |
增强的热塑性模塑复合材料.GMT规范.第1部分:名称与符号 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation; German version EN 13677-1:2003) |
| DIN EN 13677-2-2003 |
增强的热塑性模塑复合材料.GMT规范.第2部分:试验方法和一般要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003) |
| DIN EN 13677-3-2003 |
增强的热塑性模塑复合材料.GMT规范.第3部分:特殊要求 |
(Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements; German version EN 13677-3:2003) |
| DIN EN 13683-2004 |
园艺机具.整体动力粉碎机/削片机.安全 |
|
| DIN EN 13684-2004 |
园艺设备.可在侧面控制的草坪通气机和松土机.安全 |
|
| DIN EN 13687-1-2002 |
混凝土结构的保护和检修用产品和设备.试验方法.热相容性测定.第1部分:用防冻盐浸泡的冻融循环 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion; German version DIN EN 13687-1:2002) |
| DIN EN 13687-2-2002 |
混凝土结构的保护和检修用产品和设备.试验方法.热相容性测定.第2部分:雷雨循环(热冲击) |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002) |
| DIN EN 13687-3-2002 |
混凝土结构的保护和检修用产品和设备.试验方法.热相容性测定.第3部分:无防冻盐冲击的热循环 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002) |
| DIN EN 13687-4-2002 |
混凝土结构的防护和检修用产品和设备.试验方法.热适应性的测定.第4部分:干热循环试验 |
(Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002) |
| DIN EN 13687-5-2002 |
混凝土结构的防护和检修用产品和设备.试验方法.热适应性的测定.第5部分:耐温度冲击性 |
(Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock; German version EN 13687-5:2002) |
| DIN EN 1369-1997 |
铸造.磁粉检验 |
(Founding - Magnetic particle inspection; German version EN 1369:1996) |
| DIN EN 13693-2004 |
预制混凝土产品.特殊屋顶组件 |
|
| DIN EN 13697-2002 |
化学消毒剂和防腐变剂.食品、工业、家庭和研究所范围内使用的化学消毒剂的杀菌和/或杀真菌性能评定用定量无 |
(Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical desinfectants used in food, industrial, domestic and institutional areas - Test method and requirement |
| DIN EN 13698-1-2004 |
托盘生产规范.第1部分:800mmx1200mm木制平托盘的制作规范 |
(Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets; German version EN 13698-1:2003) |
| DIN EN 13698-1-2004 |
托盘生产规范.第1部分:800 mm x 1200 mm木制平托盘的制作规范 |
|
| DIN EN 13698-2-2004 |
托盘生产规范.第2部分:1000mmx1200mm木制平托盘的制作规范 |
(Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets; German version EN 13698-2:2003) |
| DIN EN 13698-2-2004 |
托盘生产规范.第2部分:1000 mm x 1200 mm木制平托盘的制作规范 |
|
| DIN EN 137-1993 |
呼吸保护装置.压缩空气容器装置(压缩空气呼吸器).要求、检验、标识 |
(Respiratory protective devices; self-contained open-circuit compressed air breathing apparatus; requirements, testing, marking; German version EN 137:1993) |
| DIN EN 1370-1997 |
铸造.用标准试样对比检验表面粗糙度 |
(Founding - Surface roughness inspection by visualtactile comparators; German version EN 1370:1996) |
| DIN EN 137000-1998 |
总规范.电动机运行用带液态电介质的铝电介质交流电压电容器 |
(Generic specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors; German version EN 137000:1997) |
| DIN EN 13701-2002 |
航空航天.航空系统.术语词汇 |
(Aerospace - Space systems - Glossary of terms; Trilingual version EN 13701:2001) |
| DIN EN 13702-1-2004 |
沥青和沥青粘合剂.改性沥青动态粘度的测定.第1部分:圆锥和平板法 |
|
| DIN EN 13702-2-2004 |
沥青和沥青粘合剂.改性沥青动态粘度的测定.第2部分:同轴圆柱法 |
|
| DIN EN 13703-2004 |
沥青和沥青粘合剂.变形能的测定 |
|
| DIN EN 13704-2002 |
化学消毒剂.食品、工业、家庭和研究单位用化学消毒剂的杀孢子活性评定用定量悬浮试验.试验方法和要求(阶段2 |
() |
| DIN EN 13705-2004 |
热塑性材料的焊接.热气焊机械和设备(包括挤焊) |
|
| DIN EN 13706-1-2003 |
增强塑料复合材料.挤拉制型材规范.第1部分:命名 |
(Reinforced plastic composites - Specification for pultruded profiles - Part 1: Designation; German version EN 13706-1:2002) |
| DIN EN 13706-2-2003 |
增强塑料复合材料.挤拉制型材规范.第2部分:试验方法和一般要求 |
(Reinforced plastic composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements; German version EN 13706-2:2002) |
| DIN EN 13706-3-2003 |
增强塑料复合材料.挤拉制型材规范.第3部分:特殊要求 |
(Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements; German version EN 13706-3:2002) |
| DIN EN 13707-2005 |
防水用柔性薄板.屋顶防水用增强沥青薄板.定义和特性 |
|
| DIN EN 13708-2002 |
食品.用电子自旋共振光谱法检验经辐照的食品 |
(Foodstuffs - Detection of irradiated food containing crystalline sugar by ESR-spectroscopy; German version EN 13708:2001) |
| DIN EN 13709-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002) |
| DIN EN 1371-1-1997 |
铸造业.探伤检验.第1部分:砂型铸件.重力金属铸件.低压金属铸件 |
(Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:1997) |
| DIN EN 1371-2-1998 |
铸造业.渗透检验.第2部分:精密铸件 |
(Founding - Liquid penetrant inspection - Part 2: Investment castings; German version EN 1371-2:1998) |
| DIN EN 137100-1998 |
分规范.电动机启动用带液态电介质的铝电介质交流电压电容器.结构类型识别 |
(Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997) |
| DIN EN 137101-1998 |
空白详细规范.电动机启动用带液态电介质的铝电介质交流电压电容器.结构类型识别 |
(Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 137101:1995) |
| DIN EN 13711-2002 |
内河导航船舶.船舶运行用绞车的安全要求 |
(Inland navigation vessels - Winches for ship operation - Safety requirements; German version EN 13711:2002) |
| DIN EN 13716-2003 |
表面活性剂.基本氮总量的测定.电势滴定法 |
(Surface active agents - Determination of total base nitrogen - Potentiometric titration; German version EN 13716:2001) |
| DIN EN 13717-2003 |
表面活化剂.测定一级、二级和三级氨基氮.电位测量滴定法 |
(Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration; German version EN 13717:2002) |
| DIN EN 13718-1-2002 |
空气、水和难以通行地带的救护.第1部分:病人治疗连续性所需医疗器具接口要求 |
(Air, water and difficult terrain ambulances - Part 1: Medical device interface requirements for the continuity of patient care; German version EN 13718-1:2002) |
| DIN EN 13718-2-2002 |
空气、水和难以通行地带的救护.第2部分:病人治疗连续性所需手术和技术要求 |
(Air, water and difficult terrain ambulances - Part 2: Operational and technical requirements for the continuity of patient care; German version EN 13718-2:2002) |
| DIN EN 13719 Berichtigung 1-2005 |
土工织物及其相关产品.与土工合成阻挡层接触的土工织物长期保护效果的测定.DIN EN 13719-2002的勘误 |
|
| DIN EN 13719-2002 |
土工织物和土工织物有关产品.与土工合成屏障接触的土工织物长期保护效能的测定 |
(Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers; German version EN 13719:2002) |
| DIN EN 1372-1999 |
胶粘剂.地板覆盖物和墙壁涂层用胶粘剂的试验方法 |
(Adhesives - Test method for adhesives for floor and wall coverings - Peel test; German version EN 1372:1999) |
| DIN EN 13720-2002 |
可运输储气瓶.乙炔气瓶蓄电池设备装填条件 |
(Transportable gas cylinders - Filling conditions for acetylene cylinder battery vehicles; German version EN 13720:2002) |
| DIN EN 13721-2004 |
家具.表面反射的评估 |
|
| DIN EN 13722-2004 |
家具.表面光泽度的评估 |
|
| DIN EN 13723-2002 |
石油产品.汽油中低铅含量的测定.波长色散X射线荧光光谱法 |
(Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF); German version EN 13723:2002) |
| DIN EN 13724-2003 |
邮政业务.私人信箱和信箱投信口金属板缝隙的要求和试验方法 |
(Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods; German version EN 13724:2002) |
| DIN EN 13725-2003 |
空气质量.用动态气味测定法测定气味浓度 |
(Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003) |
| DIN EN 13726-1-2002 |
主要伤口敷料试验方法.第1部分:吸收度 |
(Test methods for primary wound dressings - Part 1: Aspects of absorbency; German version EN 13726-1:2002) |
| DIN EN 13726-2-2002 |
主要伤口敷料试验方法.第2部分:可渗透薄膜敷料湿气蒸发传输率 |
(Test methods for primary wound dressings - Part 2: Moisture vapour transmission rate of permeable film dressings; German version EN 13726-2:2002) |
| DIN EN 13726-3-2003 |
非放射性医疗器械.主要伤口敷料试验方法.第3部分:防水性 |
(Non-active medical devices - Test methods for primary wound dressings - Part 3: Waterproofness; German version EN 13726-3:2003) |
| DIN EN 13726-4-2003 |
非放射性医疗器械.主要伤口敷料试验方法.第4部:符合性 |
(Non-active medical devices - Test methods for primary wound dressings - Part 4: Conformability; German version EN 13726-4:2003) |
| DIN EN 13726-6-2003 |
非放射性医疗器械.主要伤口敷料试验方法.第6部分:气味控制 |
(Non-active medical devices - Test methods for primary wound dressings - Part 6: Odour control; German version EN 13726-6:2003) |
| DIN EN 13727-2004 |
化学消毒剂和防腐剂.医疗器械用化学消毒剂的杀菌作用评价用定量悬浮试验.试验方法和要求(第2阶段第1步) |
|
| DIN EN 1373-1999 |
胶粘剂.地板及墙壁铺面用胶粘剂的检验方法.剪切试验 |
(Adhesives - Test methods for adhesives for floor and wall coverings - Shear test; German version EN 1373:1999) |
| DIN EN 13732-2003 |
食品加工机械.农家散装奶冷却器.使用、安全和卫生用结构、性能和适用性要求 |
(Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene; German version EN 13732:2002) |
| DIN EN 13733-2002 |
混凝土构件的修补和保护用产品和系统.试验方法.结构搭接耐久力的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of the durability of structural bonding; German version EN 13733:2002) |
| DIN EN 13736-2003 |
机床安全.气动压力机 |
(Safety of machine tools - Pneumatic presses; German version EN 13736:2003) |
| DIN EN 13738-2005 |
土工织物和土工织物相关产品.土壤中拔出阻力的测定 |
|
| DIN EN 13739-1-2003 |
农业机械.固体肥料撒播机和全幅撒肥机.环境保护.第1部分:要求 |
(Agricultural machinery - Solid fertilizer broadcasters and full-width distributors; Environmental protection - Part 1: Requirements; German version EN 13739-1:2003) |
| DIN EN 13739-2-2003 |
农业机械.固体肥料撒播机和全幅撒肥机.环境保护.第2部分:试验方法 |
(Agricultural machinery - Solid fertilizer broadcasters and full-width distributors; Environmental protection - Part 2: Test methods; German version EN 13739-2:2003) |
| DIN EN 1374-2000 |
农业机械.圆筒仓用筒仓固定卸载机 |
(Agricultural machinery - Silos stationary unloaders for round silos - Safety; German version EN 1374:2000) |
| DIN EN 13740-1-2003 |
农用机械.固体肥料分行施肥机.环保.第1部分:要求 |
(Agricultural machinery - Solid fertilizer line-distributors; Environmental protection - Part 1: Requirements; German version EN 13740-1:2003) |
| DIN EN 13740-2-2003 |
农用机械.固体肥料分行施肥机.环保.第2部分:试验方法 |
(Agricultural machinery - Solid fertilizer line-distributors; Environmental protection - Part 2: Test methods; German version EN 13740-2:2003) |
| DIN EN 13741-2004 |
机械干燥系列潮湿冷却塔的热性能验收试验 |
|
| DIN EN 13742-1-2005 |
灌溉技术.固定式喷水系统.第1部分:选择、设计、规划和安装 |
|
| DIN EN 13742-2-2005 |
灌溉技术.整体设置喷水系统.第2部分:试验方法 |
|
| DIN EN 13743-2002 |
涂覆磨料的安全要求 |
(Safety requirements for coated abrasives; German version EN 13743:2001) |
| DIN EN 13744-2005 |
运动场表面.通过在热水中浸渍的加速老化规程 |
|
| DIN EN 13745-2004 |
运动区域用表面.镜面反射率的测定 |
|
| DIN EN 13746-2004 |
运动场表面.由于水、霜和热条件的变化而引起的尺寸变化的测定 |
|
| DIN EN 13748-1-2004 |
水磨石砖.第1部分:内部用水磨石砖 |
|
| DIN EN 1375-2003 |
识别卡系统.交叉集成电路卡附加格式.ID-000卡尺寸和物理特性 |
(Identification card systems - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics; German version EN 1375:2002) |
| DIN EN 13750-2003 |
暖炉、炊具或炉架上用家用水壶.定义、要求和试验方法 |
(Domestic water kettles for use on top of stove, cooker or hob - Definitions, requirements and test methods; German version EN 13750:2002) |
| DIN EN 13751-2002 |
食品.用光致发光法探测辐照过的食品 |
(Foodstuffs - Detection of irradiated food using photostimulated luminescence; German version EN 13751:2002) |
| DIN EN 13752-2003 |
饮用水处理用产品.二氧化锰 |
(Products used for treatment of water intended for human consumption - Manganese dioxide; German version EN 13752:2003) |
| DIN EN 13753-2003 |
生活用水的水处理用品.粒状活性铝氧土 |
(Products used for treatment of water intended for human consumption - Granular activated alumina; German version EN 13753:2002) |
| DIN EN 13754-2003 |
生活用水处理用产品.膨润土 |
(Products used for treatment of water intended for human consumption - Bentonite; German version EN 13754:2003) |
| DIN EN 13755 Berichtigung 1-2004 |
DIN EN 13755-2002的技术勘误 |
|
| DIN EN 13755-2002 |
天然石料试验方法.大气压下吸水性的测定 |
(Natural stone test methods - Determination of water absorption at atmospheric pressure; German version EN 13755:2001) |
| DIN EN 13756-2003 |
木地板.术语 |
(Wood flooring - Terminology; Trilingual version EN 13756:2002) |
| DIN EN 13757-1-2003 |
仪表及其远程读数的通信系统 |
(Communication systems for meters and remote reading of meters - Part 1: Data exchange; English version EN 13757-1:2002) |
| DIN EN 13757-2-2005 |
仪表及其远程读数的通信系统.第2部分:物理层和链路层 |
|
| DIN EN 13757-3-2005 |
仪表及其远程读数的通信系统.第3部分:专用层 |
|
| DIN EN 13757-4-2005 |
仪表通信系统和仪表远程读数.第4部分:无线仪表读数(在868 MHz 至870 MHz SRD频带上运行的无线电仪表读数) |
|
| DIN EN 13758-1-2002 |
纺织品.太阳紫外线保护特性.第1部分:外衣织物试验方法 |
(Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001) |
| DIN EN 1376 Berichtigung 1-1997 |
对DINEN1376:1996-10的校正 |
(Corrigenda to DIN EN 1376:1996-10 (EN 1376:1996/AC:1996)) |
| DIN EN 1376-1996 |
食品.块状甜品中糖精的测定.分光光度测量法 |
(Foodstuffs - Determination of saccharin in table top sweetener preparations - Spectrometric method; German version EN 1376:1996) |
| DIN EN 13761-2002 |
办公家具.来访者座椅 |
(Office furniture - Visitors chairs; German version EN 13761:2002) |
| DIN EN 13763-1-2004 |
民用爆炸物.雷管和传爆管.第1部分:要求 |
|
| DIN EN 13763-11-2004 |
民用爆炸物.雷管和传爆管.第9部分:雷管和传爆管抗摔落损坏的测定 |
(Explosives for civil uses - Detonators and relays - Part 11: Determination of resistance to damage by dropping of detonators and relays; German version EN 13763-11:2003) |
| DIN EN 13763-11-2004 |
民用爆炸物.雷管和传爆管.第9部分:雷管和传爆管抗摔落损坏的测定 |
|
| DIN EN 13763-12-2004 |
民用爆炸物.雷管和传爆管.第12部分:雷管抗流体静压力的测定 |
(Explosives for civil uses - Detonators and relays - Part 12: Determination of resistance to hydrostatic pressure; German version EN 13763-12:2003) |
| DIN EN 13763-12-2004 |
民用爆炸物.雷管和传爆管.第12部分:雷管抗流体静压力的测定 |
|
| DIN EN 13763-13-2004 |
民用爆炸物.雷管和传爆管.第13部分:电雷管耐静电放电性的测定 |
|
| DIN EN 13763-15-2005 |
民用爆炸物.雷管和传爆管.第15部分:等效起爆能力的测定 |
|
| DIN EN 13763-16-2004 |
民用爆炸物.雷管和传爆管.第16部分:延时精度的测定 |
|
| DIN EN 13763-17-2004 |
民用爆炸物.雷管和传爆管.第17部分:电雷管的非点火电流测定 |
|
| DIN EN 13763-18-2004 |
民用爆炸物.雷管和传爆管.第18部分:电雷管的串联点火电流的测定 |
|
| DIN EN 13763-19-2004 |
民用爆炸物.雷管和传爆管.第19部分:电雷管的点火脉冲测定 |
|
| DIN EN 13763-2-2002 |
民用爆炸物.雷管和继电器.第2部分:热稳定性的测定 |
(Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability; German version EN 13763-2:2002) |
| DIN EN 13763-20-2004 |
民用爆炸物.雷管和传爆管.第20部分:电子雷管总体承受力的测定 |
(Explosives for civil uses - Detonators and relays - Part 20: Determination of total resistance of electric detonators; German version EN 13763-20:2003) |
| DIN EN 13763-20-2004 |
民用爆炸物.雷管和传爆管.第20部分:电子雷管总体承受力的测定 |
|
| DIN EN 13763-21-2004 |
民用爆炸物.雷管和传爆管.第21部分:电雷管的闪络电压测定 |
|
| DIN EN 13763-22-2004 |
民用爆炸物.雷管和传爆管.第22部分:引线的电容、绝缘电阻和绝缘击穿的测定 |
|
| DIN EN 13763-23-2002 |
民用爆炸物.雷管和继电器.第23部分:激波管激波速度的测定 |
(Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube; German version EN 13763-23:2002) |
| DIN EN 13763-24-2002 |
民用爆炸物.雷管和继电器.第24部分:激波管非导电性的测定 |
(Explosives for civil uses - Detonators and relays - Part 24: Determination of the electrical non-conductivity of shock tube; German version EN 13763-24:2002) |
| DIN EN 13763-25-2004 |
民用爆炸物.雷管和传爆管.第25部分:表面连接器、传爆管和耦合附件的传递能力测定 |
|
| DIN EN 13763-26-2004 |
民用爆炸物.雷管和传爆管.第26部分:雷管和传爆管的可靠和安全功能的设备和附件的定义、方法和要求 |
|
| DIN EN 13763-3-2002 |
民用爆炸物.雷管和继电器.第3部分:冲击灵敏性的测定 |
(Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact; German version EN 13763-3:2002) |
| DIN EN 13763-4-2004 |
民用爆炸物.雷管和传爆管.第4部分:引线和冲击管耐磨性的测定 |
(Explosives for civil uses - Detonators and relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes; German version EN 13763-4:2003) |
| DIN EN 13763-4-2004 |
民用爆炸物.雷管和传爆管.第4部分:引线和冲击管耐磨性的测定 |
|
| DIN EN 13763-5-2004 |
民用爆炸物.雷管和传爆管.第5部分:引线和冲击管耐切割损坏性的测定 |
(Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes; German version EN 13763-5:2003) |
| DIN EN 13763-5-2004 |
民用爆炸物.雷管和传爆管.第5部分:引线和冲击管耐切割损坏性的测定 |
|
| DIN EN 13763-6-2004 |
民用爆炸物.雷管和传爆管.第5部分:引线耐低温断裂性的测定 |
(Explosives for civil uses - Detonators and relays - Part 6: Determination of resistance to cracking at low temperatures of leading wires; German version EN 13763-6:2003) |
| DIN EN 13763-6-2004 |
民用爆炸物.雷管和传爆管.第5部分:引线耐低温断裂性的测定 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com