标准号 |
中文名称 |
英文名称 |
EN 463-1994 |
抗液态化学品的防护服 试验方法 射流防渗透性测定(射流试验) |
Protective clothing for use against liquid chemicals - Test method: Determination of resistance to penetration by a jet of liquid (Jet Test) |
EN 464-1994 |
包括气溶液体和固体粒子的抗液态和气态化学品的防护服 试验方法:气密服的密封性测定(内压力试验) |
Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test) |
EN 468-1994 |
液态化学品防护服 试验方法:喷射抗渗透性的测定(喷射试验) |
Protective clothing for use against liquid chemicals - Test method: Determination of resistance to penetration by spray (Spray test) |
EN 469-1995 |
消防人员的防护服装 消防防护服装的要求和试验方法 |
Protective clothing for firefighters - Requirements and test methods for protective clothing for firefighting |
EN 47-1988 |
木材防腐剂 对防护家天牛 (Linnaeus)幼虫的毒性值的测定(实验室法) |
Wood preservatives; determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) (laboratory method) |
EN 471-2003 |
专业人员用高能见度报警服 试验方法及要求 |
High-visibility warning clothing for professional use - Test methods and requirements |
EN 472-1994 |
压力计 词汇 |
Pressure gauges - Vocabulary |
EN 473-2000 |
无损检测 无损检测人员的资格和认证 一般原则 |
Non destructive testing - Qualification and certification of NDT personnel - General principles |
EN 474-1-1994 |
土方机械 安全 第1部分:一般要求 |
Earth-moving machinery - Safety - Part 1: General requirements |
EN 474-10-1998 |
土方机械 安全 第10部分:挖沟机的要求 |
Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
EN 474-11-1998 |
土方机械 安全 第11部分:土地和垃圾掩埋夯土机要求 |
Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
EN 474-2-1996 |
土方机械 安全 第2部分:履带式推土机的要求 |
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
EN 474-3-1996 |
土方机械 安全 第3部分:装载机的要求 |
Earth-moving machinery - Safety - Part 3: Requirements for loaders |
EN 474-4-1996 |
土方机械 安全 第4部分:挖掘装载机的要求 |
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
EN 474-5-1996 |
土方机械 安全 第5部分:液压挖掘机的要求 |
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
EN 474-6-1996 |
土方机械 安全 第6部分:翻斗车的要求 |
Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
EN 474-7-1998 |
土方机械 安全 第7部分:铲土机要求 |
Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
EN 474-8-1998 |
土方机械 安全 第8部分:平地机的要求 |
Earth-moving machinery - Safety - Part 8: Requirements for graders |
EN 474-9-1998 |
土方机械 安全 第9部分:管道敷设机的要求 |
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
EN 475-1995 |
医疗设备 电气报警信号 |
Medical devices - Electrically-generated alarm signals |
EN 476-1997 |
用于排水管道组件、重力系统的排水管的一般要求 |
General requirements for components used in discharge pipes, drains and sewers for gravity systems |
EN 477-1995 |
门窗制造用未增塑聚氯乙烯(PVC-U)外形 通过下落重物对主要侧面抗冲击性的测定 |
Unplasticized polyvinyl chloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by the falling mass |
EN 478-1995 |
门窗制造用未增塑聚氯乙烯(PVC-U)外形 暴露于摄氏150℃后的外观 试验方法 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 ℃ - Test method |
EN 479-1995 |
门窗制造用未增塑聚氯乙烯(PVC-U)外形 热反转的测定 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion |
EN 48-1988 |
木材防腐剂 对家具蛀虫根除作用的测定(实验室法) |
Wood preservatives; determination of the eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) |
EN 480-1-1997 |
混凝土、灰泥和水泥浆的混合物 试验方法 第1部分:用于测试的参考混凝土和参考灰泥 |
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
EN 480-10-1996 |
混凝土、灰泥和水泥浆的混合物 试验方法 第10部分:水溶解氯化物含量的测定 |
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content |
EN 480-11-1998 |
混凝土、灰泥和水泥浆的混合物 试验方法 第11部分:硬化混凝土空气隙特性的测定 |
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete |
EN 480-12-1997 |
混凝土、灰泥和水泥浆的混合物 试验方法 第12部分:混合物碱含量的测定 |
Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures |
EN 480-13-2002 |
混凝土、灰泥和水泥浆的混合物 试验方法 第13部分:测试灰泥混合物用参考圬工灰浆 |
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures |
EN 480-2-1996 |
混凝土、灰泥和水泥浆的混合物 试验方法 第2部分:凝固时间的测定 |
Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
EN 480-4-1996 |
混凝土、灰泥和水泥浆的混合物 试验方法 第4部分:混凝土泌水性的测定 |
Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete |
EN 480-5-1996 |
混凝土、灰泥和水泥浆的混合物 试验方法 第5部分:毛细作用吸水率的测定 |
Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption |
EN 480-6-1996 |
混凝土、灰泥和水泥浆的混合物 试验方法 第6部分:红外线分析 |
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis |
EN 480-8-1996 |
混凝土、灰泥和水泥浆的混合物 试验方法 第8部分:常用干料含量的测定 |
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content |
EN 481-1993 |
工作场所空气 度量空气沉降粒子的尺寸分数定义 |
Workplace atmospheres; size fraction definitions for measurement of airborne particles |
EN 482-1994 |
工作场所空气 化学试剂测量程序性能的一般要求 |
Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents |
EN 484-1997 |
专用液化石油气器具规范 包括室外用配套烤架的独立烤盘 |
Specification for dedicated liquefied petroleum gas appliances - Independent hotplates, including those incorporating a grill for outdoor use |
EN 485-1-1993 |
铝和铝合金 片材、带材和板材 第1部分:检验和交货的技术条件 |
Aluminium and aluminium alloys-Sheet, strip, and plate-Part 1: Technical conditions for inspection and delivery |
EN 485-2-1994 |
铝和铝合金 片材、带材和板材 第2部分:机械性能 |
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
EN 485-2-2004 |
铝和铝合金.薄板、带材和板材.第2部分:机械性能 |
|
EN 485-3-2003 |
铝和铝合金 片材、带材和板材 第3部分:热轧制品的形状和尺寸公差 |
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
EN 485-4-1993 |
铝和铝合金 片材、带材和板材 第4部分:冷轧制品的形状和尺寸公差 |
Aluminium and aluminium alloys-Sheet, strip and plate-Part 4: Tolerances on shape and dimensions for cold-rolled products |
EN 486-1993 |
铝和铝合金 挤压铸锭 规范 |
Aluminium and aluminium alloys-Extrusion ingots-Specifications |
EN 487-1993 |
铝和铝合金 轧锭 规范 |
Aluminium and aluminium alloys- Rrolling ingots- Specifications |
EN 488-2003 |
热水分配管道 地下热水网用预先绝热包覆的管道系统 成套钢铁管道设备的管阀门组件、聚氨酯热绝缘和聚乙 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
EN 489-2003 |
热水分配管道 地下热水网用预隔热包覆的管道系统 成套钢铁管道设备的接头组件、聚氨酯热绝缘和聚乙烯外 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
EN 49-1-1992 |
木材防腐剂 用产卵和幼虫成活法对抗家具蛀虫防护效果的测定 第1部分:表面处理法运用(实验室法) |
Wood preservatives; determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival; part 1: application by surface treatment (laboratory method) |
EN 49-2-1992 |
木材防腐剂 用产卵和幼虫成活法对抗家具蛀虫防护效果的测定 第2部分:浸渍法运用(实验室法) |
Wood preservatives; determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival; part 1: application by impregnation (laboratory method) |
EN 490-1994 |
混凝土屋面瓦及配件 产品规范 |
Concrete roofing tiles and fittings - Product specifications |
EN 491-1994 |
混凝土屋面瓦及配件 试验方法 |
Concrete roofing tiles and fittings - Test methods |
EN 493-1992 |
紧固件 表面不均匀性 螺母 |
Fasteners; Surface discontinuities; Nuts |
EN 495-5-2000 |
防水用柔性板 低温下折叠性的测定 第5部分:屋顶防水用塑料和橡胶板 |
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing |
EN 497-1997 |
专用液化石油气器具规范 室外用多用途蒸煮炉 |
Specification for dedicated liquefied petroleum gas appliances - Multi purpose boiling burners for outdoor use |
EN 498-1997 |
专用液化石油气器具规范 室外用烤肉架 |
Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use |
EN 499-1994 |
焊接消耗品 非合金与细粒钢的手工金属电弧焊用包剂焊条 分类 |
Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels - Classification |
EN 500-1-1995 |
移动式道路施工机械 安全 第1部分:通用要求 |
Mobile road construction machinery - Safety - Part 1: Common requirements |
EN 500-2-1995 |
移动式道路施工机械 安全 第2部分:路面研压机的特殊要求 |
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines |
EN 500-3-1995 |
移动式道路施工机械 安全 第3部分:夯土机械的特殊要求 |
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil stabilization machines |
EN 500-4-1995 |
移动式道路施工机械 安全 第4部分:夯实机械的特殊要求 |
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
EN 50001-1972 |
低压开关设备和控制设备 尺寸 一般规则 |
Low-voltage switchgear and controlgear- Dimensions- General rules |
EN 50002-1972 |
低压开关设备和控制设备尺寸 继电器接触固定孔 |
Low-voltage switchgear and controlgear- Dimensions- Fixing holes of contactor relays |
EN 50003-1973 |
低压开关设备和控制设备尺寸 电动机接触器固定孔 |
Low-voltage switchgear and controlgear for industrial use- Dimensions- Fixing holes of contactor for motors |
EN 50005-1976 |
低压开关设备和控制设备 连线端标记 一般规则 |
Low voltage switchgear and controlgear for industrial use- Terminal marking- General rules |
EN 50011-1977 |
低压开关设备和控制设备 特殊控制继电器的终端标志和特殊数字和特殊标记 |
Low voltage switchgear and controlgear for industrial use- Terminal marking, distinctive number and distinctive letter for particular contactor relays |
EN 50012-1977 |
低压开关设备和控制设备 特殊接触器辅助连接用终端标志和特殊数字 |
Low voltage switchgear and controlgear for industrial use- Terminal marking and distinctive number for auxiliary contacts of particular contactors |
EN 50013-1977 |
低压开关设备和控制设备 特殊控制开关触点连线端子标志和参数 |
Low voltage switchgear and controlgear for industrial use- Terminal marking and distinctive number for particular control switches |
EN 50014/prA3-1998 |
潜在爆炸环境用防爆电气 一般要求 |
Electrical apparatus for potentially explosive atmospheres - General requirements |
EN 50014/prAA-1999 |
潜在爆炸环境用防爆电气 一般要求 修改AA |
Electrical apparatus for potentially explosive atmospheres - General requirements; Amendment AA |
EN 50015-1998 |
潜在爆炸环境用防爆电气 O级密封设备 |
Electrical apparatus for potentially explosive atmospheres - Oil immersion “O” |
EN 50016-2002 |
潜在爆炸环境用防爆电气 p级密封设备 |
Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus p |
EN 50017-1998 |
潜在爆炸环境下防爆用电气 q级填充粉料 |
Electrical apparatus for potentially explosive atmospheres - Powder filling q |
EN 50020-2002 |
潜在爆炸环境用防爆电气i级安全性 |
Electrical apparatus for potentially explosive atmospheres - Intrinsic safety i |
EN 50028-1987 |
潜在爆炸性环境用防爆电气设备m 型密封 |
Electrical apparatus for potentially explosive atmospheres; encapsulation“m” |
EN 50033-1991 |
潜在爆炸性环境用防爆电气设备防甲烷矿工帽灯 |
Electrical apparatus for potentially explosive atmospheres; caplights for mines susceptible to firedamp |
EN 50039-1980 |
潜在爆炸性环境用防爆电气设备固有安全i系统 |
Electrical apparatus for potentially explosive atmospheres. Intrinsic safety i Systems |
EN 50041-1981 |
工业用低压开关控制设备控制开关42.5×80行程开关尺寸和特性 |
Low voltage switchgear and controlgear for industrial use. Control switches. Position switches 42.5 × 80. Dimensions and characteristics |
EN 50042-1980 |
工业用低压开关控制设备终端标记外加辅助电子电路件和接点的连接 |
Low voltage switchgear and controlgear for industrial use. Terminal marking. Terminals for external associated electronic circuit components and contacts |
EN 50043-1985 |
工业用低压开关控制设备平面连接尺寸和量规 |
Low voltage switchgear and controlgear for industrial use. Sizes numbers and gauges for flat connections |
EN 50047-1981 |
工业用低压开关控制设备控制开关30×55行程开关尺寸和特性 |
Low voltage switchgear and controlgear for industrial use. Control switches. Position switches 30×55. Dimensions and characteristics |
EN 50050-2001 |
潜在爆炸性环境用防爆电气设备手持静电喷 |
Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
EN 50053-1-1987 |
使用易燃喷涂材料的静电喷涂器的选择、安装和使用要求第1部分:能量极限为0.24mJ的手持静电喷漆枪及有关 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable spraying materials - Part 1: Hand-held electrostatic paint spray guns with an energy limit of O.24 mJ and their associated apparatus |
EN 50053-2-1989 |
使用易燃材料的静电喷涂器的选择、安装和使用要求第2部分:能量极限为5mJ的手持静电喷粉枪及有关装置 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - part 2: Hand-held electrostatic powder spray guns with an energy limit of 5 mJ and their associated apparatus |
EN 50053-3-1989 |
使用易燃材料的静电喷涂器的选择、安装和使用要求第3部分:能量极限为0.24mJ 或5mJ的手持静电纤维填料喷 |
Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - Part 3: Hand - held electrostatic flock spray guns with an energy limit of 0,24 mJ or 5 mJ and their associated apparatus |
EN 50059-1990 |
涂漆和饰面用不可燃材料手持静电喷涂设备规范 |
Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
EN 50063-1989 |
电阻焊和相关工艺用设备的制造和安装的安全要求 |
Safety requirements for the construction and the installation of equipment for resistance welding and allied processes |
EN 50065-1-2001 |
频率范围为3kHz至148.5kHz的低压电气设备的信号装置 第1部分:一般要求、频带和电磁干扰 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances |
EN 50065-2-1-2003 |
频率范围为3kHz-148.5kHz的低压电气设备的信号装置第2-1部分:主通信设备频率范围为95kHz-148.5kHz以及计 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use i |
EN 50065-2-2-2003 |
频率范围为3kHz-148.5kHz的低压电气设备的信号装置第2-2部分:主通信设备频率范围为95kHz-148.5kHz以及计 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use i |
EN 50065-2-3-2003 |
频率范围为3kHz-148.5kHz的低压电气设备的信号装置第2-3部分:主通信设备频率范围为95kHz-148.5kHz以及计 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by el |
EN 50065-4-1-2001 |
频率范围为3kHz-148.5KHZ的低压电气设备的信号装置低压去耦滤波器总规范 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-1: Low voltage decoupling filters; Generic specification |
EN 50065-4-3-2003 |
频率范围为3kHz至148.5kHz的低压电气设备的信号第4-3部分:低压去偶滤波器输入滤波器 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-3: Low voltage decoupling filter; Incoming filter |
EN 50065-4-4-2003 |
频率范围为3kHz至148.5kHz的低压电气设备的信号装置第4-4部分:低压去耦滤波器阻抗滤波器 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter; Impedance filter |
EN 50065-4-5-2003 |
频率范围为3kHz至148.5kHz的低压电气设备的信号装置第4-5部分:低压去耦滤波器分割滤波器 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-5: Low voltage decoupling filter; Segmentation filter |
EN 50065-7-2001 |
频率范围为3kHz至148.5kHz的低压电气设备的信号装置第7部分:设备阻抗 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance |
EN 50066-1992 |
道路车辆中主供电设备用的小型连接器规范 |
Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
EN 50073-1999 |
燃气或氧气检验和测量装置的选择安装使用和维修指南 |
Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen |
EN 50075-1990 |
家用和类似用途Ⅱ类设备连接用带软线的2.5A、250V不可再连接的两相扁插销规范 |
Flat non-wirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
EN 50075/prA1-1995 |
家用和类似用途Ⅱ类设备连接用带软线的2.5A、250V不可再连接的两相扁插销规范修改A1 |
Flat non rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
EN 50077-1993 |
心脏起搏器第3部分:可植入的心脏起搏器用的小薄面连接器 |
Low-profile connector for implantable cardiac pacemakers |
EN 50080-1991 |
MAC AM-VSB收报机RF性能规范 |
RF characteristics of MAC AM-VSB cable receivers |
EN 50083-10-2002 |
电视和声音信号及交互式服务用电缆分配系统 第10部分:回程线路系统性能 |
Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
EN 50083-2-2001 |
电视和声音信号及交互式服务用电缆网络第2部分:设备的电磁兼容性 |
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
EN 50083-3-2002 |
电视和声音信号及交互式服务用电缆网络第3部分:共轴电缆网络的活力宽谱带设备 |
Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks |
EN 50083-4-1998 |
电视和声音信号及交互式服务用电缆网络第4部分:共轴电缆网络的无源宽谱带设备 |
Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
EN 50083-5-2001 |
电视和声音信号及交互式服务用电缆网络第5部分:起点设备 |
Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
EN 50083-6-1997 |
电视和声音信号及交互式服务用电缆网络第6部分:光学设备 |
Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
EN 50083-8-2002 |
电视和声音信号及交互式服务用电缆网络第8部分:网络的电磁兼容性 |
Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks |
EN 50083-9-2002 |
电视和声音信号及交互式服务用电缆网络第9部分:DVB/MPEG-2-传输电流用 CATV-/SMATV端点和类似专业设备 |
Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
EN 50085-1/prA2-2002 |
电气装置用电缆槽和电缆管道系统第1部分:一般要求 修改PrA2 |
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A2 |
EN 50085-2-3-1999 |
电气装置用电缆槽和电缆管道系统第2-3部分:箱式设备用有槽电缆槽系统的特殊要求 |
Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
EN 50086-1-1993 |
电缆装置用导管系统第1部分:一般要求 |
Conduit systems for cable management - Part 1: General requirements |
EN 50086-1/prA1-1995 |
电气装置用导管系统第1部分:一般要求 修改A1 |
Conduit systems for electrical installations - Part 1: General requirements; Amendment A1 |
EN 50087-1993 |
家用和类似用途电器的安全散装牛奶冷却器的特殊要求 |
Safety of household and similar electrical appliances; particular requirements for bulk-milk coolers |
EN 50090-2-1-1994 |
家用及建筑物电子系统(HBES)第2-1部分:系统综述、建筑 |
Home and Building Electronic Systems (HBES) - Part 2-1: System overview; architecture |
EN 50090-3-1-1994 |
家用及建筑物电子系统(HBES)第3-1部分:应用方面应用结构介绍 |
Home and Building Electronic Systems (HBES) - Part 3-1: Aspects of application - Introduction to the application structure |
EN 50090-3-2-1995 |
家用及建筑物电子系统(HBES)第3-2部分:应用方面用户程序 |
Home and Building Electronic Systems (HBES) - Part 3-2: Aspects of application - User process |
EN 50090-3-2-2004 |
家用和建筑物用电子系统(HBES).第3-2部分:使用方面.1类HBES的用户说明 |
|
EN 50090-4-1-2004 |
家用和建筑物用电子系统.第4-1部分:媒介独立层.HBES 1级应用层 |
|
EN 50090-4-2-2004 |
家用和建筑物用电子系统(HBES).第4-2部分:介质独立层.1级HBES运输层、网络层和数据链路层的通用部分 |
|