标准号 |
中文名称 |
英文名称 |
EN 4009-2003 |
航空航天系列耐热镍基合金 NI-P100HT (Inconel 718) 双六角头紧公差柄中长螺纹螺栓等级:1550 MPa (常 |
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4009 (2003-0 |
EN 4011-2003 |
航空航天系列耐热镍基合金 NI-P100HT (Inconel 718)镀银、双六角自锁螺母等级: 1550 MPa (常温)/600℃ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy, TI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4011 (2003-05). |
EN 4013-2003 |
航空航天系列耐热镍基合金 NI-P100HT (Inconel 718)镀银自锁带柄螺母等级:1550 MPa (常温)/600℃ |
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4013 (2003-05). |
EN 4014-2003 |
航空航天系列厚壁自锁插件设计标准 |
Aerospace series - Inserts, thick wall, self-locking - Design standard / Note: To be replaced by prEN 4014 (2003-05). |
EN 4015-2003 |
航空航天系列厚壁自锁插件安装和拆卸程序 |
Aerospace series - Inserts, thickwall, self-locking - Installation and removal procedure / Note: To be replaced by prEN 4015 (2003-05). |
EN 4018-2001 |
标准号: |
中文标题: |
EN 4019-2001 |
标准号: |
中文标题: |
EN 402-2003 |
呼吸保护装置 呼吸器管理需要在火灾中自救用带罩过滤装置 要求、测试和标志 |
Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
EN 4020-2001 |
标准号: |
中文标题: |
EN 4021-2001 |
标准号: |
中文标题: |
EN 4022-2001 |
标准号: |
中文标题: |
EN 4023-2001 |
标准号: |
中文标题: |
EN 4024-2001 |
标准号: |
中文标题: |
EN 4025-2001 |
标准号: |
中文标题: |
EN 4026-2001 |
标准号: |
中文标题: |
EN 4027-2001 |
标准号: |
中文标题: |
EN 4028-2001 |
标准号: |
中文标题: |
EN 4029-2001 |
标准号: |
中文标题: |
EN 403-1993 |
自救式呼吸保护设备 火灾中自救用带罩过滤装置 要求、测试和标志 |
Respiratory protective devices for self-rescue; filtering devices with hood for self-rescue from fire; requirements, testing, marking |
EN 403-2004 |
自救用呼吸保护器.火灾逃生用带面罩的过滤装置.要求、检验和标记 |
|
EN 4030-2001 |
标准号: |
中文标题: |
EN 4031-2001 |
标准号: |
中文标题: |
EN 404-1993 |
自救式呼吸保护设备 自救式过滤器 要求、测试和标志 |
Respiratory protective for self-rescue; filter self-rescuer; requirements, testing, marking |
EN 4047-2003 |
航空航天系列镀银NI-PH2601 (因康镍合金 718)耐热镍基合金制自锁MJ螺纹螺母等级:1550 MPa (环境温度 |
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ - Technical specification / Note: To be replaced by prEN 4047 (2003 |
EN 4048-2003 |
标准号: |
中文标题: |
EN 405-2001 |
呼吸保护设备 防气体或防气体和颗粒的阀滤式半面罩 要求、测试和标志 |
Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
EN 4051-2002 |
航空航天系列钛合金管连接 60°球形端口连接 |
Aerospace series - Pipe couplings, 60? spherical, in titanium alloy - Port connection |
EN 4054-2003 |
航空航天系列管连接、松套法兰和密封件碳氟橡胶密封件和铝合金附件技术规范 |
Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; Technical specification / Note: To be replaced by prEN 4054 (2003-05). |
EN 4058-2001 |
航空航天系列钛和钛合金用焊接填缝条和填缝丝直径 0.5 mm≤D≤ 5.0 mm尺寸 |
Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions |
EN 4059-2001 |
航空航天系列钢焊接用填缝条和填缝丝直径0,5 mm≤D≤5,0 mm尺寸 |
Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions |
EN 4060-2001 |
航空航天系列耐热合金焊接用填缝条和填缝丝直径 0.5 mm ≤D≤5.0 mm尺寸 |
Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm; Dimensions |
EN 4069-1996 |
航空航天系列钝化耐热钢制小矮的普通六角螺母等级:600MPa(环境温度)/ 650℃ |
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650℃ |
EN 407-1994 |
防热危险的保护手套(热和/或火) |
Protective gloves against thermal risks (heat and/or fire) |
EN 407-2004 |
防热危害的手套(高温和/或火焰) |
|
EN 408-2003 |
木材构件 结构木材和胶合板木材 某些物理性能和机械性能的测定 |
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
EN 4085-2001 |
航空航天系列镍基合金 NI-B40002(NiSi4B2)铜焊用填缝金属非晶质箔 |
Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing; Amorphous foil |
EN 409-1993 |
木材构件 试验方法 榫型紧固件屈服力矩的测定 钉入法 |
Timber structures - Test methods - Determination of the yield moment of dowel type fasteners - Nails |
EN 410-1998 |
建筑物用玻璃 装玻璃构件的发光和阳光特性的测定 |
Glass in building - Determination of luminous and solar characteristics of glazing |
EN 41003-1998 |
电信网络连接设备的特殊安全要求 |
Particular safety requirements for equipment to be connected to telecommunication networks |
EN 4103-2001 |
航空航天系列镍基合金 NI-B40002(NiSi4B2)钎焊用添缝金属硼化物箔 |
Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing; Borided foil |
EN 4104-2001 |
航空航天系列镍基合金 NI-B40002钎焊用添缝金属粉末和糊状 |
Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing; Powder or paste |
EN 4105-1998 |
航空航天系列镍基合金NI-B40002(NiSi4B2)钎焊用添缝金属窄条带材 |
Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape |
EN 4113-2001 |
航空航天系列带橡胶垫减震钝化的耐腐蚀钢环形P型卡箍尺寸、质量 |
Aerospace series - Clamps, loop (P type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses |
EN 4114-2001 |
航空航天系列带橡胶垫减震的铝合金环形P型卡箍尺寸、质量 |
Aerospace series - Clamps, loop (P type) in aluminium alloy with rubber cushioning - Dimensions, masses |
EN 4115-2001 |
航空航天系列卡箍橡胶垫尺寸、质量 |
Aerospace series - Cushion, rubber for clamps - Dimensions, masses |
EN 4116-2003 |
航空航天系列FE-PA92HT (A286)耐热钢制自锁螺纹镀银六角螺母等级:1100 MPa (环境温度)/425 ℃ |
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/425℃ / Note: To be replaced by prEN 4116 (2003-05). |
EN 4117-2003 |
航空航天系列耐热镊基合金 NI-PH2601 (铬镊铁合金718)制自锁螺纹镀银双六角螺母等级:1550 MPa (环境温 |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4117 (2003-05). |
EN 4118-2003 |
航空航天系列FE-PA92HT (A286)耐热钢 形自锁螺纹镀银双六角螺母等级:1100 MPa (环境温度)/650 ℃ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4118 (2003-05). |
EN 4119-2003 |
航空航天系列FE-PA92HT (A286)耐热钢形自锁深孔螺纹镀银双六角螺母等级:1100 MPa (环境温度)/650 ℃ |
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4119 (2003-05). |
EN 4120-2003 |
航空航天系列耐热镍基合金 NI-PH-1302 (Waspaloy)、自锁螺纹镀银双六角螺母等级:1200 MPa (环境温度)/ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), sliver plated on thread - Classification: 1 210 MPa (at ambient temperature)/730℃ / Note: To be replaced by prEN 4120 (2003-05). |
EN 4121-2003 |
航空航天系列 FE-PA92HT (A286)耐热钢、带锯齿自锁螺纹镀银带柄螺母等级:1100 MPa (环境温度)/650 ℃ |
Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4121 (2003-05). |
EN 4122-2003 |
航空航天系列FE-PA92HT (A286)耐热钢 、自锁螺纹镀银带柄螺母等级:1100 MPa (环境温度)/650 ℃ |
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4122 (2003-05). |
EN 4123-2003 |
航空航天系列耐热镍基合金 NI-PH2601 HT (Inconel 718)、自锁螺纹镀银带柄螺母等级:1550 MPa (环境温 |
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4123 (2003-05). |
EN 4124-2003 |
航空航天系列60°型模用耐热镍基合金 NI-PH-1302 (Waspaloy)制自锁螺纹镀银带柄螺母等级:1210 MPa (环 |
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), silver plated on thread, for 60 swage - Classification: 1 210 MPa (at ambient temperature)/730℃ / Note: To be replaced by prEN 4124 (2003-05). |
EN 413-1-2004 |
圬工混凝土.第1部分:组成、规范和合格标准 |
|
EN 413-2-1994 |
圬工用水泥 第2部分:试验方法 |
Masonry cement - Part 2: Test methods |
EN 414-2000 |
机械安全 安全标准的起草和报批规则 |
Safety of machinery - Rules for the drafting and presentation of safety standards |
EN 415-1-2000 |
包装机械安全 第1部分:包装机械及相关设备的术语和分类 |
Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
EN 415-2-1999 |
包装机械安全 第2部分:预成型刚性容器包装机械 |
Packaging machines safety - Part 2: Pre-formed rigid container packaging machines |
EN 415-3-1999 |
包装机械安全 第3部分:成型、填充和密封机械 |
Safety of packaging machines - Part 3: Form, fill and seal machines |
EN 4166-2003 |
航空航天系列3片式弹簧夹 PTFE 套筒 |
Aerospace series - Clips, spring tension, three parts - PTFE bushes / Note: To be replaced by prEN 4166 (2003-05). |
EN 4167-2003 |
航空航天系列3片式弹簧夹FE-PA92HT (A286)耐热钢内夹片 |
Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA92HT (A286) / Note: To be replaced by prEN 4167 (2003-05). |
EN 4168-2003 |
航空航天系列3片式弹簧夹FE-PA92HT (A286)耐热钢外夹片 |
Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA92HT (A286) / Note: To be replaced by prEN 4168 (2003-05). |
EN 417-2003 |
用于便携式灶具的、带或不带阀门的液化石油气用一次性金属气筒 制作、检验、测试和标志 |
Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
EN 4179-2000 |
航空航天系列无损检验人员的资格和鉴定 |
Aerospace series - Qualification and approval of personnel for non-destructive testing |
EN 418-1992 |
机械安全 功能方面的紧急停止设备 设计原则 |
Safety of machinery; Emergency stop equipment, functional aspects; Principles for design |
EN 4182-2001 |
航空航天系列钛合金管连接8°30′ 轧制三通 |
Aerospace series - Pipe coupling 8 Degree?30′in titanium alloy - Tees, reduced |
EN 4183-2001 |
航空航天系列钛合金管连接8°30′焊接端 90°弯头 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?welded ends |
EN 4184-2001 |
航空航天系列钛合金管连接8°30′焊接端 45°弯头 |
Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Elbows 45? welded ends |
EN 4185-2001 |
航空航天系列钛合金管连接8°30′长时间运行舱壁三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees bulkhead on run long |
EN 4186-2001 |
航空航天系列钛合金管连接8°30′四通管接头 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, cross |
EN 4187-2001 |
航空航天系列钛合金管连接8°30′舱壁90度弯头 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long |
EN 4188-2001 |
空航天系列钛合金管连接8°30′焊接端舱壁90度弯头 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long, welded end |
EN 4189-2001 |
空航天系列钛合金管连接8°30′长舱壁三通管 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, bulkhead branch, long |
EN 4190-2001 |
空航天系列钛合金管连接8°30′管道上有推力丝螺母的异径三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced with thrust wire nut on run |
EN 4191-2001 |
航空航天系列钛合金管连接8°30′长舱壁用异径三通 |
Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Tees, reduced, bulkhead branch, long |
EN 4192-2001 |
航空航天系列钛合金管连接8°30′舱壁用异径三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced bulkhead branch |
EN 4193-2001 |
航空航天系列钛合金管连接8°30′长时运行舱壁用异径三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced bulkhead on run long |
EN 4194-2001 |
航空航天系列钛合金管连接8°30′舱壁用异径三通 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced, bulkhead |
EN 420-2003 |
防护手套的一般要求和试验方法 |
Protective gloves - General requirements and test methods |
EN 421-1994 |
预防电离辐射和放射性污染的防护手套 |
Protective gloves against ionizing radiation and radioactive contamination |
EN 422-1995 |
橡胶和塑料机械 安全 生产空心制品的吹模机械 设计和制造的要求 |
Rubber and plastics machines - Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction |
EN 423-2001 |
弹性地板覆盖物 耐污斑性的测定 |
Resilient floor coverings - Determination of resistance to staining |
EN 4233-2001 |
航空航天系列钛合金管连接 8°30′焊接螺纹管接头 |
Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, welded, threaded |
EN 424-2001 |
弹性地板覆盖物 家具腿模拟移动效果的测定 |
Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg |
EN 425-2002 |
弹性和层状地板覆盖物 脚轮椅子试验 |
Resilient and laminate floor coverings - Castor chair test |
EN 4250-2001 |
航空航天系列镍基合金 NI-B41001(NiCr19Si7B)钎焊用填缝金属非晶质箔 |
Aerospace series - Nickel base alloy NI-B41001 (NiCr19Si7B) - Filler metal for brazing; Amorphous foil |
EN 4258-1998 |
航空航天系列金属材料标准化的一般组织欧洲标准的类型和其使用之间的链接 |
Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
EN 426-1993 |
弹性地板覆盖物 板材宽度、长度、平直度和平面度的测定 |
Resilient floorcoverings; determination of width, length, straightness and flatness of sheet material |
EN 4267-2001 |
航空航天系列钛和钛合金圆棒直径 6 mm≤D≤160 mm尺寸 |
Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm ≤ D ≤ 160 mm - Dimensions |
EN 427-1994 |
弹性地板覆盖物 瓷砖边长、垂直度和平直度的测定 |
Resilient floor coverings - Determination of the side length, squareness and straightness of tiles |
EN 428-1993 |
弹性地板覆盖物 总厚度测定 |
Resilient floor coverings; determination of overall thickness |
EN 429-1993 |
弹性地板覆盖物 叠层厚度的测定 |
Resilient floor coverings; determination of the thickness of layers |
EN 430-1994 |
弹性地板覆盖物 单位面积质量的测定 |
Resilient floor coverings - Determination of mass per unit area |
EN 431-1994 |
弹性地板覆盖物 耐剥离性的测定 |
Resilient floor coverings - Determination of peel resistance |
EN 432-1994 |
弹性地板覆盖物 剪切力测定 |
Resilient floor coverings - Determination of shear force |
EN 4321-2003 |
航空航天系列镀银耐热镍基合金 NI-PH2601 (Inconel 718)制带安全锁线孔的细柄长螺纹双六角头螺栓等级 |
Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by |
EN 4324-2001 |
航空航天系列铝合金AL-W42201焊接用填缝金属杆 |
Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod |
EN 4325-2001 |
航空航天系列耐热合金 NI-WH1302(NiCr20Co13Mo4Ti3Al)焊接用填缝金属丝和杆 |
Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod |
EN 4326-2001 |
航空航天系列耐热合金 CO-WH4102(CoCr28W20Ni5V1)焊接用填缝金属丝和杆 |
Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod |
EN 4327-2001 |
航空航天系列耐热合金CO-WH1401(CoCr26Ni11W8)焊接用填缝金属丝和杆 |
Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding; Wire and rod |
EN 4328-2002 |
航空航天系列钢 FE-WM1601 (X18CrWNi13-3-2)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding; Wire and rod |
EN 4329-2001 |
航空航天系列 耐热合金NI-WH0001(NiCr20)焊接用填缝金属丝和杆 |
Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding; Wire and rod |
EN 433-1994 |
弹性地板覆盖物 静荷载后残留压痕的测定 |
Resilient floor coverings - Determination of residual indentation after static loading |
EN 4330-2002 |
航空航天系列钢 FE-WA4802 (X8CrNiMn27-22-2)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding; Wire and rod |
EN 4331-2002 |
航空航天系列钢 FE-WL1804 (25CrMnMo4-2-2)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding; Wire and rod |
EN 4332-2002 |
航空航天系列钢 FE-WL1805 (8CrMnMo12-4-9)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding; Wire and rod |
EN 4333-2002 |
航空航天系列钢 FE-WL1805 (X5CrNiCoMoWMn21-20-20-3-3-2)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding; Wire and rod |
EN 4334-2002 |
航空航天系列钢 FE-WL1806 (15CrMnMoV5-4-9-3)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding; Wire and rod |
EN 4335-2002 |
航空航天系列钢 FE-WA2602 (X4NiCrTiMoV26-15)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding; Wire and rod |
EN 4336-2002 |
航空航天系列钢 FE-WA3801 (X4CrNiMn20-10-2)焊接用填缝金、丝和杆 |
Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding; Wire and rod |
EN 4337-2001 |
航空航天系列耐热合金 NI-WH8901(NiCr16Ti3Mn2)焊接用填缝金属丝和杆 |
Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding; Wire and rod |
EN 4338-2001 |
航空航天系列 耐热合金NI-WH3902(NiCr25Mo10C)焊接用填缝金属丝和杆 |
Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding; Wire and rod |
EN 4339-2001 |
航空航天系列耐热合金 CO-WH4001(CoCr29W9)焊接用填缝金属丝和杆 |
Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding; Wire and rod |
EN 434-1994 |
弹性地板覆盖物 尺寸稳定性和受热卷曲的测定 |
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat |
EN 4340-2002 |
航空航天系列镁合金 MG-W68001焊接用填缝金属丝和杆 |
Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod |
EN 4341-2001 |
航空航天系列铝合金 AL-W46431焊接用填缝金属丝和杆 |
Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod |
EN 4342-2001 |
航空航天系列钛TI-W99001焊接用填缝金属丝和杆 |
Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod |
EN 4343-2002 |
航空航天系列钢 FE-WM1001(X13Cr12)焊接填缝金属丝和杆 |
Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding; Wire and rod |
EN 4344-2001 |
航空航天系列钢 FE-WM1002 (X13Cr13)焊接用填缝金属丝和杆 |
Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding; Wire and rod |