标准号 |
中文名称 |
英文名称 |
DIN EN ISO 15610-2004 |
金属材料焊接过程的规范和合格鉴定.基于已试验过的焊接耗材的合格鉴定 |
(Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003); German version EN ISO 15610:2003) |
DIN EN ISO 15610-2004 |
金属材料焊接过程的规范和合格鉴定.基于已试验过的焊接耗材的合格鉴定 |
|
DIN EN ISO 15611-2004 |
金属材料焊接程序规范和合格鉴定.根据已有的焊接经验进行合格鉴定 |
|
DIN EN ISO 15612-2004 |
金属材料焊接程序的规范和合格评定.通过采用标准焊接程序的合格评定 |
|
DIN EN ISO 15613-2004 |
金属材料焊接程序的规范和合格鉴定.基于生产前焊接试验的鉴定 |
|
DIN EN ISO 15614-1-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的弧焊接和气焊接以及镍和镍合金的弧焊接 |
|
DIN EN ISO 15614-11-2002 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002); German version EN ISO 15614-11:2002) |
DIN EN ISO 15614-12-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第12部分:点焊、缝焊和凸焊 |
|
DIN EN ISO 15614-5-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊接 |
|
DIN EN ISO 15614-8-2002 |
金属材料焊接程序规范和要求.焊接程序试验.第8部分:管对管连接件 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002); German version EN ISO 15614-8:2002) |
DIN EN ISO 15615-2002 |
气体焊接设备.焊接用Acetylenemanifoldsystems、切割和alliedprocesses高压装置的安全要求 |
(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002); German version EN ISO 15615:2002) |
DIN EN ISO 15616-1-2003 |
高质量焊接和切割用CO2激光射线机的验收试验.第1部分:通用原理和验收条件 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003); German version EN ISO 15616-1:2003) |
DIN EN ISO 15616-2-2003 |
高质量焊接和切割用CO2激光射线机的验收试验.第2部分:静态和动态准确度的测定 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003); German version EN ISO 15616-2:2003) |
DIN EN ISO 15616-3-2003 |
高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正 |
(Acceptance tests for CO-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003) |
DIN EN ISO 15618-1-2002 |
水下焊接的焊工资格鉴定试验.第1部分:超高压湿焊的潜水员焊工 |
(Qualification testing of welders for under-water welding - Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2001); German version EN ISO 15618-1:2001) |
DIN EN ISO 15618-2-2002 |
水下焊接的焊工资格鉴定试验.第2部分:超高压干焊的潜水员焊工和焊接操作员 |
(Approval testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001); German version EN ISO 15618-2:2001) |
DIN EN ISO 1562-1995 |
牙科金铸造合金 |
(Dental casting gold alloys (ISO 1562:1993); German version EN ISO 1562:1995) |
DIN EN ISO 1562-2004 |
牙科.铸金合金 |
|
DIN EN ISO 15620-2000 |
焊接.金属材料的摩擦焊接 |
(Welding - Friction welding of metallic materials (ISO 15620:2000); German version EN ISO 15620:2000) |
DIN EN ISO 15630-1-2002 |
混凝土的钢筋和预应力用钢.试验方法.第1部分:加筋棒、钢丝杆和钢丝 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bar, wire rod and wire (ISO 15630-1:2002); German version EN ISO 15630-1:2002) |
DIN EN ISO 15630-2-2002 |
混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002); German version EN ISO 15630-2:2002) |
DIN EN ISO 15630-3-2002 |
混凝土的钢筋和预应力用钢.试验方法.第3部分:预应力钢 |
(Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steels (ISO 15630-3:2002); German version EN ISO 15630-3:2002) |
DIN EN ISO 1564-1999 |
水化牙科琼脂基印模材料 |
(Dental aqueous impression materials based on agar (ISO 1564:1995); German version EN ISO 1564:1998) |
DIN EN ISO 15641-2001 |
高速切削机床用铣刀.安全要求 |
(Milling cutters for high speed machining - Safety requirements (ISO 15641:2001); German version EN ISO 15641:2001) |
DIN EN ISO 15652-2005 |
小艇.小型喷水推进艇舱内用远程操纵系统 |
|
DIN EN ISO 15652-2005 |
小艇.小型喷水推进艇舱内用远程操纵系统 |
|
DIN EN ISO 15667-2001 |
声学.由外壳和舱室控制噪声的指南 |
(Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000); German version EN 15667:2000) |
DIN EN ISO 1567-2000 |
牙科学-假牙基料聚合物 |
(Dentistry - Denture base polymers (ISO 1567:1999); German version EN ISO 1567:2000) |
DIN EN ISO 15680-2004 |
水质.使用purge-and-trap和热解析法进行若干单环芳烃、萘和一些氯化物的气相色谱测定 |
|
DIN EN ISO 15681-1-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第1部分:流量注入分析法 |
|
DIN EN ISO 15681-1-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第1部分:流量注入分析法 |
|
DIN EN ISO 15681-2-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第2部分:连续流量分析法 |
|
DIN EN ISO 15681-2-2005 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第2部分:连续流量分析法 |
|
DIN EN ISO 15682-2002 |
水质.通过流量分析(CFA和FIA)和光度测量或电势检测法测定氯化物含量 |
(Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000); German version EN ISO 15682:2001) |
DIN EN ISO 15695-2001 |
釉层和搪瓷.末涂瓷漆耐划痕性的测定. |
(Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes (ISO 15695:2000, including Technical Corrigendum 1:2000); German version EN ISO 15695:2001) |
DIN EN ISO 15700-1999 |
皮革.色牢度试验.耐水斑点色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998); German version EN ISO 15700:1999) |
DIN EN ISO 15701-1999 |
皮革.色牢度试验.受聚氯乙烯影响的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride) (ISO 15701:1998); German version EN ISO 15701:1999) |
DIN EN ISO 15702-1999 |
皮革.色牢度试验.机洗对色牢度的影响 |
(Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998); German version EN ISO 15702:1999) |
DIN EN ISO 15703-1999 |
皮革.色牢度试验.轻柔洗涤对色牢度的影响 |
(Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998); German version EN ISO 15703:1999) |
DIN EN ISO 15720-2001 |
金属涂层.孔隙率试验.胶材料电版术法测定金属衬底上金或钯涂层的孔隙率 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001); German version EN ISO 15720:2001) |
DIN EN ISO 15721-2001 |
金属涂层.孔隙率试验.用亚硫酸和二氧化硫蒸气测定金或钯涂层的孔隙率 |
(Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001); German version EN ISO 15721:2001) |
DIN EN ISO 15744-2002 |
手持非电动工具.噪声测量代码.工程法(2级) |
(Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002); German version EN ISO 15744:2002) |
DIN EN ISO 15747-2005 |
静脉注射用塑料容器 |
|
DIN EN ISO 15747-2005 |
静脉注射用塑料容器 |
|
DIN EN ISO 15747-2005 |
静脉注射用塑料容器 |
|
DIN EN ISO 15748-1-2002 |
船舶和航海技术.在船上和海上建筑物上饮用水的供应.第1部分:计划和设计 |
(Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002); German version EN ISO 15748-1:2002) |
DIN EN ISO 15748-2-2002 |
船舶和航海技术.在船上和海上建筑物上饮用水的供应.第2部分:计算方法 |
(Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002); German version EN ISO 15748-2:2002) |
DIN EN ISO 15749-1-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第1部分:卫生排水系统设计 |
|
DIN EN ISO 15749-2-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道 |
|
DIN EN ISO 15749-3-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道 |
|
DIN EN ISO 15749-4-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第4部分:卫生排水和污物处置管 |
|
DIN EN ISO 15749-5-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第5部分:甲板、货舱和游泳池的排水 |
|
DIN EN ISO 15755-1999 |
纸与纸张.反面估算 |
(Paper and board - Estimation of contraries (ISO 15755:1999); German version EN ISO 15755:1999) |
DIN EN ISO 15761-2003 |
石油和天然气工业用规格为DN100及更小的钢闸阀、球阀和止回阀 |
(Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)) |
DIN EN ISO 15774-2002 |
动植物脂肪和油.用直接石墨熔炉原子吸收光谱法测定镉含量 |
(Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2000); German version EN ISO 15774:2001) |
DIN EN ISO 15783-2004 |
无封装旋翼动力泵.级别II.规范 |
|
DIN EN ISO 15785-2002 |
技术制图.粘合、折叠和叠压接缝的符号指示和表示法 |
(Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints (ISO 15785:2002); German version EN ISO 15785:2002) |
DIN EN ISO 15788-1-2001 |
动植物脂肪和油.植物油中stigmastidenes的测定.第1部分:毛细管柱气相色谱法(基准方法) |
(Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method) (ISO 15788-1:1999); German version EN ISO 15788-1:2001) |
DIN EN ISO 15788-2-2005 |
动植物脂肪和油.植物油中豆固醇的测定.第2部分:高效液相色谱法 |
|
DIN EN ISO 15791-1-2005 |
塑料.塑料产品用中等规模燃烧试验的设计和应用.第1部分:一般指南 |
|
DIN EN ISO 15797 Berichtigung 1-2005 |
纺织品.工作服测试用工业洗涤和整理规程.EN ISO 15797-2004的勘误 |
|
DIN EN ISO 15797-2004 |
纺织材料.工作服检测用工业洗涤和整理规程 |
|
DIN EN ISO 15798 Berichtigung 1-2005 |
眼科植入物.眼科手术粘接件 |
|
DIN EN ISO 15798 Berichtigung 1-2005 |
眼科植入物.眼科手术粘接件 |
|
DIN EN ISO 15798-2001 |
眼科植入物.黏弹性眼科植入装置 |
(Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2001); German version EN ISO 15798:2001) |
DIN EN ISO 1580-1994 |
带槽平头螺钉.产品等级A |
(Slotted pan head screws - Product grade A (ISO 1580:1994); German version EN ISO 1580:1994) |
DIN EN ISO 15831-2004 |
服饰.生理效应.用热的人体模型法测量隔热性 |
|
DIN EN ISO 15854-2005 |
牙科学.铸型蜡和假牙托蜡 |
|
DIN EN ISO 15874-1-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第1部分:总则 |
|
DIN EN ISO 15874-2-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第2部分:管道 |
|
DIN EN ISO 15874-3-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第3部分:配件 |
|
DIN EN ISO 15874-5-2004 |
冷热水装置用塑料管道系统.聚丙烯(PP).第5部分:系统的适应性 |
|
DIN EN ISO 15875-1-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第1部分:总则 |
|
DIN EN ISO 15875-2-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第2部分:管道 |
|
DIN EN ISO 15875-3-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第3部分:配件 |
|
DIN EN ISO 15875-5-2004 |
冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第5部分:系统的适应性 |
|
DIN EN ISO 15876-1-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第1部分:总则 |
|
DIN EN ISO 15876-2-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第2部分:管道 |
|
DIN EN ISO 15876-3-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第3部分:配件 |
|
DIN EN ISO 15876-5-2004 |
冷热水装置用塑料管道设备.聚丁烯(PB).第5部分:系统的适应性 |
|
DIN EN ISO 15877-1-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第1部分:总则 |
|
DIN EN ISO 15877-2-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第2部分:管道 |
|
DIN EN ISO 15877-3-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第3部分:配件 |
|
DIN EN ISO 15877-5-2004 |
冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第5部分:系统的适应性 |
|
DIN EN ISO 15880-2004 |
色漆、清漆和粘合剂.水基涂料和粘合剂的MEQ值的测定 |
|
DIN EN ISO 15902-2005 |
光学和光子学.衍射光学.词汇 |
|
DIN EN ISO 15902-2005 |
光学和光子学.衍射光学.词汇 |
|
DIN EN ISO 15908-2003 |
塑料管系统粘合剂.测定粘合剂热稳定性的试验发方法 |
(Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002) |
DIN EN ISO 15913-2003 |
水质.固相萃取和衍生作用后用气相色谱法和质谱法测定包括苯达松和羟基苯甲腈在内的选定的苯氧基链烷除莠剂 |
(Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization (ISO 15913:2000); German version EN ISO 15913: |
DIN EN ISO 15914-2005 |
动物饲料.淀粉总含量的酶催化测定 |
|
DIN EN ISO 15914-2005 |
动物饲料.淀粉总含量的酶催化测定 |
|
DIN EN ISO 15914-2005 |
动物饲料.淀粉总含量的酶催化测定 |
|
DIN EN ISO 15927-1-2004 |
建筑物的湿热性能.气象数据的计算与显示.第1部分:单一气象素的月均值和年均值 |
(Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly and annual means of single meteorological elements (ISO 15927-1:2003); German version EN ISO 15927-1:2003) |
DIN EN ISO 15927-1-2004 |
建筑物的湿热性能.气象数据的计算与显示.第1部分:单一气象素的月均值和年均值 |
|
DIN EN ISO 15927-4-2005 |
建筑物的温湿性能.气候数据的计算和表示.第4部分:取暖和制冷年使用能量评定用小时数据 |
|
DIN EN ISO 1597-1999 |
塑料.未增塑的醋酸纤维素.醋酸含量的测定 |
(Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield (ISO 1597:1994); German version EN ISO 1597:1999) |
DIN EN ISO 15973-2001 |
带断点牵引心轴和突出头的封口式空心单面压装铆钉.AlA/St |
(Closed end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15973:2000); German version EN ISO 15973:2000) |
DIN EN ISO 15974-2001 |
带断点牵引心轴和埋头的封口式空心单面压装铆钉.AlA/St |
(Closed end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15974:2000); German version EN ISO 15974:2000) |
DIN EN ISO 15975-2003 |
封闭型盘头抽芯盲铆钉.AI/AIA |
(Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002) |
DIN EN ISO 15976-2003 |
封闭型盘头抽芯盲铆钉.St/St |
(Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002) |
DIN EN ISO 15977-2003 |
开口型盘头抽芯盲铆钉.AIA/St |
(Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002) |
DIN EN ISO 15978-2003 |
开口型沉头抽芯盲铆钉.AIA/St |
(Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002) |
DIN EN ISO 15979-2003 |
开口型盘头抽芯盲铆钉.St/St |
(Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002) |
DIN EN ISO 1598-1999 |
塑料.醋酸纤维素.不可溶解成份的测定 |
(Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999) |
DIN EN ISO 15980-2003 |
开口型沉头抽芯盲铆钉.St/St |
(Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002) |
DIN EN ISO 15981-2003 |
开口型盘头抽芯盲铆钉.AIA/AIA |
(Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002) |
DIN EN ISO 15982-2003 |
开口型沉头抽芯盲铆钉.AIA/AIA |
(Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002) |
DIN EN ISO 15983-2003 |
开口型盘头抽芯盲铆钉.A2/A2 |
(Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002) |
DIN EN ISO 15984-2003 |
开口型沉头抽芯盲铆钉.A2/A2 |
(Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002) |
DIN EN ISO 1599-2000 |
塑料.乙酸纤维素.模制时粘度损耗的测定 |
(Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999) |
DIN EN ISO 1600-2000 |
塑料.醋酸纤维素.利用加热的不同时期在模制试样生产中的光吸收量的测定 |
(Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999) |
DIN EN ISO 16017-1-2001 |
室内空气、环境空气和工作场所空气.用吸附管/热解吸/毛细管气相色谱法对挥发性有机化合物进行分析和取样.第 |
(Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000) |
DIN EN ISO 16021-2001 |
吸尿辅助器.从使用者和护理者的角度评价一次性使用的成人不能自制的辅助器的基本原则 |
(Urine absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000); German version EN ISO 16021:2000) |
DIN EN ISO 16032-2004 |
声学.建筑物服务设备的声压级测量.工程法 |
|
DIN EN ISO 16032-2004 |
声学.建筑物服务设备的声压级测量.工程法 |
|
DIN EN ISO 16035-2005 |
动物和植物脂肪和油.食用油中低沸点卤代烃的测定 |
|
DIN EN ISO 16047-2005 |
紧固件.扭矩/夹持力试验 |
|
DIN EN ISO 16048-2003 |
耐腐蚀不锈钢紧固件的钝化 |
(Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003) |
DIN EN ISO 16054-2002 |
外科植入物.外科植入物的最小数据集 |
(Implants for surgery - Minimum data sets for surgical implants (ISO 16054:2000); German version EN ISO 16054:2002) |
DIN EN ISO 16070-2002 |
石油和天然气工业.井下钻具.闭锁心轴和落地短接管 |
(Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001); German version EN ISO 16070:2001 (German and English text)) |