标准号 |
中文名称 |
英文名称 |
DIN EN 60352-5-2002 |
无焊连接.第5部分:压入连接.一般要求、试验方法和实施指南 |
(Solderless connections - Part 5: Press-in connections; General requirements, test methods and practical guidance (IEC 60352-5:2001); German version EN 60352-5:2001) |
DIN EN 60352-5-2004 |
无焊连接.第5部分:压入式连接.一般要求、试验方法和实用指南 |
|
DIN EN 60352-6-1998 |
无焊连接.第6部分:防渗漏连接.一般要求.检验方法和使用说明 |
(Solderless connections - Part 6: Insulation piercing connections; general requirements, test methods and practical guidance (IEC 60352-6:1997); German version EN 60352-6:1997) |
DIN EN 60352-7-2003 |
无焊连接.第7部分:弹簧夹件连接.一般要求、试验方法和使用指南 |
(Solderless connections - Part 7: Spring clamp connections; General requirements, test methods and practical guidance (IEC 60352-7:2002); German version EN 60352-7:2002) |
DIN EN 60357-2001 |
卤素白炽灯(车灯除外) |
(Tungsten halogen lamps (non-vehicle) (IEC 60357:1982 + A1:1984 up to A13:2000); German version EN 60357:1988 + A4:1991 up to A13:2000) |
DIN EN 60359-2002 |
电气和电子测量设备.性能表示 |
(Electrical and electronic measurement equipment - Expression of the performance (IEC 60359:2001); German version EN 60359:2002) |
DIN EN 60360-1999 |
灯头温升测量的标准方法 |
(Standard method of measurement of lamp cap temperature rise (IEC 60360:1998); German version EN 60360:1998) |
DIN EN 60368-1-2000 |
评定质量的压电滤波器.第1部分:一般规范 |
(Piezoelectric filters of assessed quality - Part 1: Generic specification (IEC 60368-1:2000); German version EN 60368-1:2000) |
DIN EN 60368-2-2-1999 |
压电滤波器.第2部分:压电滤波器应用指南.第2节:压电陶瓷滤波器 |
(Piezoelectric filters - Part 2: Guide to the use of piezoelectric filters - Section 2: Piezoelectric ceramic filters (IEC 60368-2-2:1996); German version EN 60368-2-2:1999) |
DIN EN 60368-3-2002 |
经质量评定的压电滤波器.第3部分:标准外形和引线接触 |
(Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections (IEC 60368-3:2001); German version EN 60368-3:2001) |
DIN EN 60368-4-1-2001 |
评定质量的压电滤波器.第4-1部分:空白详细规范.能力鉴定 |
(Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification; Capability approval (IEC 60368-4-1:2000); German version EN 60368-4-1:2000 + Corrigendum:2001) |
DIN EN 60368-4-2001 |
评定质量的压电滤波器.第4部分:分规范.能力鉴定 |
(Piezoelectric filters of assessed quality - Part 4: Sectional specification; Capability approval (IEC 60368-4:2000); German version EN 60368-4:2000 + Corrigendum:2001) |
DIN EN 60371-1-2004 |
云母基绝缘材料规范.第1部分:定义和一般要求 |
(Specification for insulating materials based on mica - Part 1: Definitions and general requirements (IEC 60371-1:2003); German version EN 60371-1:2003) |
DIN EN 60371-1-2004 |
云母基绝缘材料规范.第1部分:定义和一般要求 |
|
DIN EN 60371-2-1997 |
以云母为基材的绝缘材料规范.第2部分:试验方法 |
(Specification for insulating materials based on mica - Part 2: Methods of test (IEC 60371-2:1987 + A1:1994); German version EN 60371-2:1997) |
DIN EN 60371-3-1-1997 |
云母基绝缘材料规范.第3部分:单项材料规范.第1活页:换向器隔板和材料 |
(Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials (IEC 60371-3-1:1984); German version EN 60371-3-1:1995) |
DIN EN 60371-3-2-1997 |
云母基绝缘材料规范.第3部分:单一材料规范.第2活页:云母纸 |
(Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper (IEC 60371-3-2:1991); German version EN 60371-3-2:1995) |
DIN EN 60371-3-3-1997 |
云母基绝缘材料规范.第3部分:单项材料规范.第3活页:加热设备用硬质云母材料 |
(Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 3: Rigid mica materials for heating equipment (IEC 60371-3-3:1983); German version EN 60371-3-3:1995) |
DIN EN 60371-3-4-1997 |
云母基绝缘材料规范.第3部分:单项材料规范.第4活页:用B级环氧树脂粘合剂粘结的聚酯薄膜衬底云母纸 |
(Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-4:1992); German version EN 60371-3-4:1995) |
DIN EN 60371-3-5-1997 |
云母基绝缘材料规范.第3部分:单项材料规范.第5活页:用环氧树脂粘合剂粘结的待浸渍处理的玻璃纤维织物衬底云 |
(Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:1992); German version EN 60371-3-5:1995) |
DIN EN 60371-3-6-1997 |
云母基绝缘材料规范.第3部分:单项材料规范.第6活页:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸 |
(Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-6:1992); German version EN 60371-3-6:1995) |
DIN EN 60371-3-7-1997 |
云母基绝缘材料.第3部分:单项材料规范.第7活页:单导体胶带用带有环氧树脂的聚脂薄膜云母纸 |
(Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping (IEC 60371-3-7:1995 + Corrigendum 1995); German version EN 60371-3-7:1995) |
DIN EN 60371-3-8-1997 |
云母基绝缘材料规范.第3部分:单项材料规范.第8活页:耐火安全电缆用云母纸带 |
(Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables (IEC 60371-3-8:1995 + Corrigendum 1995); German version EN 60371-3-8:1995) |
DIN EN 60371-3-9-1997 |
云母基绝缘材料规范.第3部分:单项材料规范.第9活页:模制胶合云母板 |
(Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite (IEC 60371-3-9:1995 + Corrigendum 1995); German version EN 60371-3-9:1995) |
DIN EN 60372-2005 |
绝缘子串单球窝连接的锁紧装置.尺寸和试验(IEC 60372-1984 + A1-1991 + A2-2003) |
|
DIN EN 60375-2004 |
有关电路和磁路的规定 |
|
DIN EN 60379-2004 |
家用电蓄水式热水器的性能测量方法 |
|
DIN EN 60382-1994 |
过程控制系统用模拟气动信号 |
(Analogue pneumatic signal for process control systems (IEC 60382:1991); German version EN 60382:1993) |
DIN EN 60383-1 Berichtigung 1-2001 |
DINEN60383-1-1997(VDE0446Teil1)的勘误 |
(Corrigenda to DIN EN 60383-1 (VDE 0446 Teil 1):1997-05; German version EN 60383-1:1996/A11:1999) |
DIN EN 60383-1-1997 |
公称电压高于1000V的架空线路用绝缘子.第1部分:交流系统用陶瓷或玻璃绝缘子的定义,试验方法和验收要求 |
(Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-1:1993); German version EN 60383-1:1996) |
DIN EN 60383-2-1995 |
公称电压高于1000V的架空线路用绝缘子.第2部分:交流电路系统绝缘子串和绝缘子装置.试验方法和验收指标 |
(Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-2:1993); German version EN 60383-2:1995) |
DIN EN 60384-1-2002 |
电子设备用固定电容器.第1部分:总规范. |
(Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:1999, modified); German version EN 60384-1:2001) |
DIN EN 60384-14-2-2005 |
电子设备用固定电容器.第14-2部分:空白详细规范:抑制电磁干扰和电源网络连接用固定电容器.安全试验 |
|
DIN EN 60384-14-2-2005 |
电子设备用固定电容器.第14-2部分:空白详细规范:抑制电磁干扰和电源网络连接用固定电容器.安全试验 |
|
DIN EN 60384-14-3-2005 |
电子设备用固定电容器.第14-3部分:空白详细规范:抑制电磁干扰和电源网络连接用固定电容器.评定等级DZ |
|
DIN EN 60384-14-3-2005 |
电子设备用固定电容器.第14-3部分:空白详细规范:抑制电磁干扰和电源网络连接用固定电容器.评定等级DZ |
|
DIN EN 60384-20-1-1999 |
电子设备用固定电容器.第20部分:空白详细规范:金属化聚苯硫薄膜介质表面安装直流固定电容器.EZ级评定 |
(Fixed capacitors for use in electronic equipment - Part 20: Blank detail specification: Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors; assessment level EZ (IEC 60384-20-1:1996); German version EN 60384-20-1:1999) |
DIN EN 60384-20-1999 |
电子设备用固定电容器.第20部分:分规范:金属化聚苯硫薄膜介质直流表面安装固定电容器 |
(Fixed capacitors for use in electronic equipment - Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors (IEC 60384-20:1996); German version EN 60384-20:1999) |
DIN EN 60384-21-1-2005 |
电子设备用固定电容器.第21-1部分:空白详细规范:1级陶瓷介质的表面安装固定多层电容器.评定级别EZ |
|
DIN EN 60384-21-2005 |
电子设备用固定电容器.第21部分:分规范:1级陶瓷介质的表面安装固定多层电容器 |
|
DIN EN 60384-22-1-2005 |
电子设备用固定电容器.第22-1部分:空白详细规范:2级陶瓷介质的表面安装固定多层电容器.评定级别EZ |
|
DIN EN 60384-22-2005 |
电子设备用固定电容器.第22部分:分规范:2级陶瓷介质的表面安装固定多层电容器 |
|
DIN EN 60387-1993 |
交流电表的符号 |
(Symbols for alternating-current electricity meters (IEC 60387:1992); German version EN 60387:1992) |
DIN EN 60398-2000 |
工业电热装置.通用试验方法 |
(Industrial electroheating installations - General test methods (IEC 60398:1999); German version EN 60398:1999) |
DIN EN 60399-1999 |
带灯罩座环的E14和E27灯座柱筒螺纹用标准活页 |
(Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring (IEC 60399:1972 + A1:1997 + A2:1999); German version EN 60399:1993 + A1:1997 + A2:1999) |
DIN EN 604-1-1997 |
铝和铝合金.铸锻毛坯.第1部分:交货技术条件 |
(Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery; German version EN 604-1:1997) |
DIN EN 604-2-1997 |
铝和铝合金.铸锻毛坯.第2部分:极限尺寸和形状公差 |
(Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form; German version EN 604-2:1997) |
DIN EN 60400 Berichtigung 1-2003 |
DINEN60400-2003的技术勘误1 |
(Corrigendum to DIN EN 60400 (VDE 0616 Part 3):2003-03 (CENELEC-Corrigendum to EN 60400:2000/A1:2002)) |
DIN EN 60400-2003 |
管形荧光灯和启动器灯座 |
(Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:1999, modified + A1:2002); German version EN 60400:2000 + A1:2002) |
DIN EN 60401-3-2004 |
软磁材料制芯的术语和命名.第3部分:写入变压器和电感器磁芯制造厂产品目录中的数据格式指南 |
|
DIN EN 60404-14-2003 |
磁性材料.第14部分:用拔出或旋转法对铁磁材料试样的磁偶极矩的测量方法 |
(Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002); German version EN 60404-14:2002) |
DIN EN 60404-2-1998 |
磁性材料.第2部分:用爱普斯坦方圈测定电工钢片和钢带的磁性能的方法 |
(Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC 60404-2:1996); German version EN 60404-2:1998) |
DIN EN 60404-4-2002 |
磁性材料.第4部分:铁和钢直流磁特性测量方法 |
(Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials (IEC 60404-4:1995 + A1:2000); German version EN 60404-4:1997 + A1:2002) |
DIN EN 60404-6-2004 |
磁性材料.第6部分:使用环形样品的频率范围在20 Hz 到 200 kHz的磁性软金属和粉末材料的磁性能测量方法 |
|
DIN EN 60417-1-2000 |
用于设备的图形符号.第1部分:总览和应用 |
(Graphical symbols for use on equipment - Part 1: Overview and application (IEC 60417-1:1998); Trinlingual version EN 60417-1:1998) |
DIN EN 60417-2-2000 |
用于设备的图形符号.第2部分:符号原文 |
(Graphical symbols for use on equipment - Part 2: Symbol originals (IEC 60417-2:1998); Trilingual version EN 60417-2:1999) |
DIN EN 60420-1994 |
高压交流开关熔断器 |
(High-voltage alternating current switch-fuse combinations (IEC 60420:1990); German version EN 60420:1993) |
DIN EN 60423-1995 |
电气设备用导管.电气安装用导管的外径和导管及配件的螺纹 |
(Conduits for electrical purposes - Outside diameters of conduits for electrical installations and threads for conduits and fittings (IEC 60423:1993, modified); German version EN 60423:1994) |
DIN EN 60424-1-2000 |
铁氧体磁芯.表面不规则性指南 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999) |
DIN EN 60424-2-1998 |
铁氧体磁芯表面不平度极限值的导则.第2部分:RM-磁芯 |
(Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores (IEC 60424-2:1997); German version EN 60424-2:1997) |
DIN EN 60424-3-2000 |
铁氧体磁芯.表面不规则性指南.第3部分:ETD磁芯和E磁芯 |
(Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores (IEC 60424-3:1999); German version EN 60424-3:1999) |
DIN EN 60424-4-2001 |
铁氧体磁芯.表面不规则性指南.第4部分:环芯 |
(Ferrit cores - Guide on the limits of surface irregularities - Part 4: Ring-cores (IEC 60424-4:2001); German version EN 60424-4:2001) |
DIN EN 60427-2001 |
高压交流电断路器综合试验 |
(Synthetic testing of high-voltage alternating current circuit-breakers (IEC 60427:2000); German version EN 60427:2000) |
DIN EN 60431-1998 |
磁性氧化物正方形磁芯(RM磁芯).尺寸和附件 |
(Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts (IEC 60431:1983 + A1:1995); German version EN 60431:1997) |
DIN EN 60431/A2-1999 |
磁氧化物制方芯(RM-芯)及其附件的尺寸.修正A2 |
(Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts; Amendment A2; (IEC 60431:1983/A2:1996); German version EN 60431:1997/A2:1998) |
DIN EN 60432-1-2000 |
白炽灯的安全规范.第1部分:家用和类似一般照明用钨丝白炽灯 |
(Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999, modified); German version EN 60432-1:2000) |
DIN EN 60432-1-2005 |
白炽灯.安全规范.第1部分:家用和类似场合普通照明用钨丝灯 |
|
DIN EN 60432-2-2000 |
白炽灯的安全规范.第2部分:家用和类似一般照明用的卤钨灯 |
(Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes (IEC 60432-2:1999, modified); German version EN 60432-2:2000) |
DIN EN 60432-3-2003 |
白炽灯.安全规范.第3部分:卤钨灯(非车用) |
(Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) (IEC 60432-3:2002); German version EN 60432-3:2003) |
DIN EN 60432-3-2005 |
白炽灯.安全规范.第3部分:钨卤灯(非车用) |
|
DIN EN 60433-1999 |
1kV以上额定电压的架空电线用绝缘子.交流电系统用瓷绝缘子.长棒型绝缘子串的特性值 |
(Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type (IEC 60433:1998); German version EN 60433:1998) |
DIN EN 60437-1998 |
高电压绝缘子无线电干扰试验 |
(Radio interference test on high-voltage insulators (IEC 60437:1997); German version EN 60437:1997) |
DIN EN 60439-1 Bb.2-1997 |
封闭式低压开关设备和控制设备成套装置.第1部分:型式试验和部分型式试验组合.技术报告:故障电弧条件下检验 |
(Enclosed low-voltage switchgear and controlgear assemblies - Part 1: Typetested and partially typetested assemblies; technical report: Guide for testing under conditions of arcing due to an internal fault (IEC 61641:1996)) |
DIN EN 60439-1-2000 |
低压开关设备和控制设备组件.第1部分:型式试验和部分型式试验的组件 |
(Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999); German version EN 60439-1:1999) |
DIN EN 60439-1-2005 |
低压开关设备和控制设备组合装置.第1部分:已通过型式试验和部分型式试验的组合装置 |
|
DIN EN 60439-2-2001 |
低压开关设备和控制设备成套装置.第2部分:母线干线系统的特殊要求(母线路)(IEC60439-2:2000) |
(Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) (IEC 60439-2:2000); German version EN 60439-2:2000) |
DIN EN 60439-3-2002 |
低压开关设备和控制设备组合装置.第3部分:安装在非专业人员要进入使用场所的低压开关设备和控制设备的组合 |
(Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use; Distribution boards (IEC 60439 |
DIN EN 60439-4 Berichtigung 2-2004 |
对DIN EN 60439-4 (VDE 0660 Teil 501)-2000的勘误 |
|
DIN EN 60439-4-2000 |
低压开关设备和控制设备组件.第4部分:施工现场用组件的特殊要求 |
(Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) (IEC 60439-4:1990:1990 + A1:1995 + A2:1999); German version EN 60439-4:1991 + A1:1995 + A2:1999) |
DIN EN 60439-4-2005 |
低压开关设备和控制设备组合装置.第4部分:施工现场用组合装置(ACS)的特殊要求 |
|
DIN EN 60439-5-1997 |
低压开关设备和控制设备组件.第5部分:室外公共场所安装用低压开关组件的特殊要求.供电网络用电力分配电缆交 |
(Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places; cable distribution cabinets (CDCs) for power distribution networks (IEC 60439-5:1996); German version E |
DIN EN 60439-5/A1-1999 |
低压开关设备和控制设备组件.第5部分:室外公共场所安装用低压开关组件的特殊要求.供电网络用电力分配电缆交 |
(Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places; cable distribution cabinets (CDCs) for power distribution in networks; Amendment A1 (IEC 60439-5:1996/A |
DIN EN 60442-1999 |
家用和类似用途的电面包烘烤器.使用性能的测量方法 |
(Electric toasters for household and similar purposes - Methods for measuring the performance (IEC 60442:1998); German version EN 60442:1998) |
DIN EN 60444-1-2000 |
用π型网络的零相位技术测量石英晶体单的参数.第1部分:用π型网络的零相位技术测量石英晶体单的谐振频 |
(Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network (IEC 60444-1:1986 |
DIN EN 60444-2-1997 |
用π型网络的零相位技术测量石英谐振器参数.第2部分:测量石英谐振器的动态电容的相位偏离法 |
(Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units (IEC 60444-2:1980); German version EN 60444-2:1997) |
DIN EN 60444-3-1997 |
用π型网络的零相位技术测量石英谐振器参数.第3部分:用与并联电容量Co补偿相连的π网络相位技术测量200MHz |
(Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the |
DIN EN 60444-4-1997 |
用π型网络的零相位技术测量石英谐振器参数.第4部分:石英晶体件负荷谐振频率fl、负荷谐振电阻Rl的测量方 |
(Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency f, load resonance resistance R and the calculation of other derived values of quartz crystal units, |
DIN EN 60444-5-1997 |
石英谐振器参数测量.第5部分:用自动网络分析仪和误差修正技术评定电气参数的测量方法 |
(Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German version EN 60444-5:1997) |
DIN EN 60444-6-1997 |
石英谐振器参数测量.第6部分:取决于负载的测量 |
(Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (IEC 60444-6:1995); German version EN 60444-6:1997) |
DIN EN 60444-7-2004 |
石英晶体件参数的测量.第7部分:石英晶体件的活性和频率下降的测量 |
|
DIN EN 60444-8-2004 |
石英晶体件参数的测量.第8部分:表面安装的石英晶体件用测试工具 |
|
DIN EN 60445-2000 |
人机接口、标记和识别的基本与安全原则.设备终端和用相应符号标记的接线端子的识别方法(包括字母数字系统的 |
(Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules of an alphanumeric system (IEC 60445:1999); German ver |
DIN EN 60446-1999 |
人机接口的基本和安全规则.用颜色和数字对导线作标志 |
(Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or numerals (IEC 60446:1999); German version EN 60446:1999) |
DIN EN 60447-1994 |
人机接口(MMI).操纵原理 |
(Man-machine interface (MMI); actuating principles (IEC 60447:1993); German version EN 60447:1993) |
DIN EN 60447-2004 |
人机界面(MMI)、标记和标识的基础和安全原则.操作原则 |
|
DIN EN 60454 Bb.1-1999 |
电工用自粘胶带.相关标准目录.类型比较 |
(Pressure-sensitive adhesive tapes for electrical purposes - List of relevant standards, comparison of types (status as of 1999)) |
DIN EN 60454-1-1997 |
电工用自粘电线胶布带规范.第1部分:一般要求 |
(Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements (IEC 60454-1:1992); German version EN 60454-1:1994) |
DIN EN 60454-2-1997 |
电工用自粘电线胶布带规范.第2部分:试验方法 |
(Specification for pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test (IEC 60454-2:1994); German version EN 60454-2:1995) |
DIN EN 60454-3-1-2002 |
电工用压敏粘带.第3部分:单项材料规范.第1活页:聚氯乙烯薄膜压敏粘带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: PVC film tapes with pressure-sensitive adhesive (IEC 60454-3-1:1998 + A1:2001); German version EN 60454-3-1:1998 + A1:2001) |
DIN EN 60454-3-10-1997 |
电工用自粘电线胶布带.第3部分:单项材料规范.活页10:带有橡胶制热固性胶的乙酸丁酸纤维素薄膜胶粘带的要求 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive (IEC 60454-3-10:1995); German version EN 6045 |
DIN EN 60454-3-11-1999 |
电工用自粘胶带.第3部分:单项材料规范.第11页:带热固橡胶胶粘材料的皱折纤维素纸和聚乙烯对酞酸盐薄膜合成 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 11: Combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive (IEC 60454-3-11:1 |
DIN EN 60454-3-12-1999 |
电工用自粘胶带.第3部分:单项材料规范.第12页:聚乙烯薄膜自粘胶带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 12: Polyethylene film tapes with pressure-sensitive adhesive (IEC 60454-3-12:1998); German version EN 60454-3-12:1998) |
DIN EN 60454-3-13-1997 |
电工用压敏胶粘带.第3部分:单项材料的规范.活页13:带有一面是热塑料,另一面是热固橡胶粘接材料的粘胶断纤维 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; sheet 13: Requirements for combined cellulose-viscose woven fabric tapes, one side recovered with thermoplastic material, the other side with rub |
DIN EN 60454-3-14-2002 |
电工用压敏粘带.第3部分:单项材料规范.活页14:涂压敏粘合剂的聚四氟乙烯薄膜带(IEC60454-3-14:2001) |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive (IEC 60454-3-14:2001); German version EN 60454-3-14:2001) |
DIN EN 60454-3-15-2002 |
电工用压敏粘带.第3部分:单项材料规范.活页15:涂橡胶热塑粘合剂的聚酯膜/聚酯无编织复合带(IEC60454-3-15:2 |
() |
DIN EN 60454-3-16-2004 |
电工用压敏粘带.第3部分:单项材料的规范.第16活页:涂压敏粘合剂的聚脂薄膜/玻璃丝复合带 |
|
DIN EN 60454-3-17-2002 |
电工用压敏粘带.第3部分:单项材料规范.活页17:涂压敏粘合剂的聚酯和环氧复合(IEC60454-3-17:2001).德文版EN |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 17: Polyester/epoxy combinations with pressure-sensitive adhesive (IEC 60454-3-17:2001); German version EN 60454-3-17:2001) |
DIN EN 60454-3-18-2004 |
电工用压敏粘带.第3部分:单项材料的规范.第18活页:涂压敏粘合剂的聚丙烯薄膜带 |
|
DIN EN 60454-3-19-2004 |
电工用压敏粘带.第3部分:单项材料的规范.第19活页:双面涂压敏粘合剂的不同衬底材料制粘带 |
|
DIN EN 60454-3-2-1999 |
电工用自粘胶带.第3部分:单项材料的规范.第2页:带热固橡胶的或交联丙烯粘合的丙烯粘合的聚脂薄膜带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Polyester film tapes with rubber thermosetting or acrylic crosslinked adhesives (IEC 60454-3-2:1998); German version EN 60454-3-2:1998) |
DIN EN 60454-3-3-1999 |
电工用自粘胶带.第3部分:单项材料规范.第3页:带热固橡胶粘合材料的聚酯薄膜带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Polyester film tapes with rubber thermoplastic adhesive (IEC 60454-3-3:1998); German version EN 60454-3-3:1998) |
DIN EN 60454-3-4-1999 |
电工用自粘胶带.第3部分:单项材料规范.第4页:带热固橡胶粘合材料的纤维素皱纹纸 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive (IEC 60454-3-4:1998); German version EN 60454-3-4:1998) |
DIN EN 60454-3-5-1999 |
电工用自粘胶带.第3部分:单项材料规范.第5页:带热固橡胶粘合材料的纤维素非皱纹纸 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive (IEC 60454-3-5:1998); German version EN 60454-3-5:1998) |
DIN EN 60454-3-6-1999 |
电工用自粘胶带.第3部分:单项材料规范.第6页:带热塑丙烯酸胶粘剂的聚碳酸脂薄膜带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 6: Polycarbonate film tapes with acrylic thermosetting adhesive (IEC 60454-3-6:1998); German version EN 60454-3-6:1998) |
DIN EN 60454-3-7-1999 |
电工用自粘胶带.第3部分:单项材料规范.第7页:聚酰亚胺薄膜自粘胶带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 7: Polyimide film tapes with pressure-sensitive adhesive (IEC 60454-3-7:1998); German version EN 60454-3-7:1998) |
DIN EN 60454-3-8-1999 |
电工用自粘胶带.第3部分:单项材料规范.第8页:玻璃布自粘胶带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 8: Glass fabric with pressure-sensitive adhesive (IEC 60454-3-8:1998); German version EN 60454-3-8:1998) |
DIN EN 60454-3-9-1999 |
电工用自粘胶带.第3部分:单项材料规范.第9页:带热固橡胶较粘材料的醋酸纤维素织带 |
(Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive (IEC 60454-3-9:1998); German version EN 60454-3-9:1998) |
DIN EN 60455-1-1999 |
电器绝缘用反应性树脂化合物.第1部分:定义和一般要求 |
(Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements (IEC 60455-1:1998); German version EN 60455-1:1998) |
DIN EN 60455-2-2000 |
电器绝缘用反应性树脂化合物.第2部分:试验方法 |
(Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (IEC 60455-2:1998); German version EN 60455-2:1999) |
DIN EN 60455-3-1-2004 |
电绝缘用树脂基反应性复合物.第3部分:单项材料规范.活页1:未填充环氧树脂复合物 |
(Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds (IEC 60455-3-1:2003); German version EN 60455-3-1:2003) |