标准号 |
中文名称 |
英文名称 |
prEN 9103-2001 |
航空航天系列特殊部门的不同管理质量管理体系 |
Aerospace series - Quality management systems - Variation management of key characteristics |
prEN 9110-2000 |
航空航天系列质量体系维护机构质量保证的模型 |
Aerospace series - Quality systems - Model for quality assurance applicable for maintenance organizations |
prEN 9111-2001 |
航空航天系列质量体系维修机构质量体系评估质量体系 |
Aerospace series - Quality systems - Quality system assessment applicable to maintenance organizations |
prEN 9120-2002 |
航空航天系列质量体系货物销售商质量保证的模型 |
Aerospace series - Quality management systems - Requirements for stockist distributors (based on ISI 9001:2000) and quality systems; Model for quality assurance applicable for stockist distributors (based on ISO 9001:1994) |
prEN 9121-2001 |
航空航天系列质量体系货物销售商质量体系评估 |
Aerospace series - Quality systems - Quality system assessment applicable to stockist distributors |
prEN 9130-2000 |
航空航天系列质量体系记录的保存 |
Aerospace series - Quality systems - Record retention |
prEN 9131-2001 |
航空航天系列 质量管理体系 不规范性文件 |
Aerospace series - Quality management systems - Nonconformance documentation |
prEN 9132-2001 |
航空航天系列 质量管理体系部分标记的数据矩阵(2D)编码的质量要求 |
Aerospace series - Quality management systems - Data Matrix (2D) coding quality requirements for parts marking |
prEN 9133-2002 |
航空航天系列 质量保证 EN航空航天产品 限制程序 |
Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts |
prEN 9200-2001 |
航空航天系列 计划管理计划管理规范指南 |
Aerospace series - Programme management - Guidelines for project management specification |
prEN 925-1992 |
滑翔降落设备 术语 |
Paragliding equipment; nomenclature |
prEN 926-2-2003 |
滑翔降落设备 滑翔伞 第2部分:分类飞行安全特性的要求和试验方法 |
Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight savety characteristics / Note: Intended as replacement for ENV 926-2 (1999-08). |
prEN 933-11-1995 |
集料的几何性能试验 第11部分:细屑评估 沙当量 |
Tests for geometrical properties of aggregates - Part 11: Assessment of fines - Sand equivalent |
prEN 933-12-1995 |
集料的几何性能试验 第12部分:细屑评估 亚甲蓝法 |
Tests for geometrical properties of aggregates - Part 12: Assessment of fines - Methylene blue test |
prEN 934-3-2002 |
混凝土、灰泥和水泥的添加剂 第3部分:圬工灰浆用添加剂 定义、要求和一致性 |
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar; Definitions, requirements and conformity, marking and labelling |
prEN 934-5-2003 |
混凝土、灰泥和水泥的添加剂 第5部分:喷射混凝土添加剂 定义、规范和一致性准则 |
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements and conformity |
prEN 943-1992 |
防液态和气态化学制品(包括液态悬浮颗粒和固体颗粒)的防护服 带不透气连接的不通风防护服的性能要求(1B |
Protective clothing for use against liquid and gaseous chemicals, including liquid aerosols and solid particles; performance requirements for unventilated protective clothing with gas tight connections (type 1B equipment) |
prEN 944-1992 |
防液态和气态化学品(包括液态悬浮颗粒和固体颗粒)的防护服 带不透气连接的空气输送防护服的性能要求 (1 |
Protective clothing for use against liquid and gaseous chemicals, including liquid aerosols and solid particles; performance requirements for air fed protective clothing with gas tight connections (type 1C equipment) |
prEN 945-1992 |
防液态和气态化学品(包括液态悬浮颗粒和固体颗粒)的防护服 带透气连接的空气输送防护服的性能要求 (2型 |
Protective clothing for use against liquid and gaseous chemicals, including liquid aerosols and solid particles; performance requirements for air fed protective clothing with non gas tight connections (type 2 equipment) |
prEN 946-1992 |
防液态和气态化学品(包括液态悬浮颗粒和固体颗粒)的防护服 带不透气连接的不通风压缩防护服的性能要求( |
Protective clothing for use against liquid and gaseous chemicals, including liquid aerosols and solid particles; performance requirements for unventilated encapsulating protective clothing with gas tight connections (type 1A equipment) |
prEN 948-1-1996 |
门和窗 耐静力扭转的测定 第1部分:窗 |
Windows and doors - Determination of the resistance to static torsion - Part 1: Windows |
prEN 954-2-1999 |
机械安全 控制系统部件的安全 第2部分:确认 |
Safety of machinery - Safety-related parts of control systems - Part 2: Validation |
prEN 955-3-1993 |
耐熔产品的化学分析 第3部分:具有铬的材料(湿分析法) |
Chemical analysis of refractory products; part 3: chrome-bearing materials (wet methods) |
prEN 956-1992 |
2 |
Non-destructive testing; penetrant testing; equipment |
prEN 968-1992 |
热天气下机动自行车使用者用防护帽 |
Protective helmets for users of mopeds in hot climates |
prEN 97-1-1977 |
装配于垂直面的带可视交叉连接体的混合螺塞 第1部分:尺寸特性(1/2公称尺寸螺塞) |
Mixing taps with visible cross connected body for mounting on vertical surfaces; part 1: dimensional characteristics (1/2 nominal size taps) |
prEN 971-2-1996 |
色漆和清漆 涂层材料的术语和定义 第2部分:与油漆特性和性能有关的特定术语 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties |
prEN 971-3-1996 |
色漆和清漆 涂层材料的术语和定义 第3部分:表面准备和应用方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and application methods |
prEN 974-2003 |
人类用水处理用化学制品 磷酸 |
Chemical used for treatment of water intended for human consumption - Phosphoric acid / Note: Intended as replacement for EN 974 (1997-07). |
prEN 975-2-2002 |
木材 硬木的表观分级 第2部分:白杨木 |
Sawn timber - Appearance grading of hardwoods - Part 2: Poplars |
prEN 976-3-1997 |
玻璃增强塑料地下贮罐 非压力存储液体石油燃料水平园柱状贮罐 第3部分:双壁贮罐的要求和试验方法 |
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 3: Requirements and test methods for double wall tanks |
prEN 976-4-1997 |
玻璃增强塑料地下贮罐 非压力存储液体石油燃料水平园柱状贮罐 第4部分:双壁贮罐的运输、储存、操作和安 |
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 4: Transport, handling, storage and installation of double wall tanks |
prEN 987-1995 |
塑料管道和导管系统 铸模装置 装置中磨掉碎片摆锤式冲击试验强度的测定 |
Plastics piping and ducting systems - Injection-moulded fittings - Determination of the Charpy impact strength of test pieces cut from a fitting |
prEN 993-19-2002 |
成形致密耐火制品的试验方法 第19部分:热膨胀的测定 |
Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion |
prEN 993-20-2002 |
成形致密耐火制品的试验方法 第20部分:环境温度下抗磨损的测定 |
Methods of test for dense shaped refractory products - Part 20: Determination of resistance to abrasion at ambient temperature |
prEN ISO 10052-2000 |
声学空中噪声和碰撞声隔音及设备噪声的现场测量测量法 |
Acoustics - Field measurements of airborne and impact sound insulation and of equipment sound - Survey method (ISO/DIS 10052:2000) |
prEN ISO 10085-2000 |
消防车和消防设备操作控制及其他显示符号 |
Fire fighting vehicles and equipment - Symbols for operator controls and other displays (ISO/DIS 10085:2000) |
prEN ISO 10240-2002 |
小艇艇主手册 |
Small craft - Owners manual (ISO/DIS 10240:2002) |
prEN ISO 10297-2002 |
可运输的气瓶阀门规范及定型试验 |
Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO/DIS 10297:2002) |
prEN ISO 10318-2000 |
土工合成材料土工布及相关产品、土工膜及土工合成粘土衬术语及其定义 |
Geosynthetics - Geotextiles, geotextile-related products, geomembranes and geosynthetic clay liners - Terms and theirdefinitions (ISO/DIS 10318:2000) |
prEN ISO 10351-1996 |
塑料用125mm火焰测定样品可燃性 |
Plastics - Determination of the combustibility of specimens using a 125 mm flame source (ISO/DIS 10351:1996) |
prEN ISO 10354-2000 |
粘合剂结构粘合剂胶接组件间耐久特性楔形破裂试验 |
Adhesives - Caracterization of durability of structural-adhesive-bonded assemblies - Wedge rupture test (ISO 10354:1992) |
prEN ISO 10366-2-2003 |
塑料甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 10366-2:2003) / Note: Intended as replacement for EN ISO 10366-2 (199 |
prEN ISO 10434-2002 |
石油和天然气工业用螺栓帽状钢闸阀 |
Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002) |
prEN ISO 10468-1999 |
塑料管玻璃纤维增增强热固塑料管 在湿环境中长期特殊环形蠕变劲度的测定及湿蠕变因子的计算 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor (ISO/DIS 10468:1999) |
prEN ISO 10497-2002 |
阀门试验阀门耐火试验要求 |
Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2002) |
prEN ISO 105-B06-2003 |
纺织品色牢度试验第B06部分:耐高温人造光色牢度:氙弧灯试验 |
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO 105-B06:1998, including Amendment 1:2002) |
prEN ISO 105-E01-1995 |
纺织品色牢度试验第E01部分:耐水色牢度 |
Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:1994) |
prEN ISO 105-E04-1995 |
纺织品色牢度试验第E04部分:耐汗渍色牢度 |
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:1994) |
prEN ISO 10618-2002 |
碳纤维树脂浸渍纱拉伸性能的测定 |
Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO/DIS 10618:2002) |
prEN ISO 10806-2003 |
管道工程皱纹软金属管用非合金及不锈钢配件 |
Pipework - Fittings for corrugated metallic hoses (ISO/FDIS 10806:2003) |
prEN ISO 10821-1998 |
工业缝纫机缝纫机、装置和系统的安全要求 |
Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO/DIS 10821:1998) |
prEN ISO 10848-1-1999 |
声学毗连房间之间冲击噪声和空气中噪声沿侧面传递的实验测量第1部分:框架文件 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 1: Frame document |
prEN ISO 10848-2-2001 |
声学毗连房间之间冲击噪声和空气中噪声沿侧面传递的实验测量第2部分:接合处有小影响的轻质件的应用 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 2: Application to light elements when the junction has a small influence (ISO/DIS 10848-2:2001) |
prEN ISO 10848-3-2001 |
声学毗连房间之间冲击噪声和空气中噪声沿侧面传递的实验测量第3部分:接合处有实质性影响的轻质件的 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence (ISO/DIS 10848-3:2001) |
prEN ISO 10993-3-2003 |
医疗器械的生物学评价第3部分:遗传毒性、致癌性和生殖毒性试验 |
Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO/FDIS 10993-3:2003) / Note: Intended as replacement for EN 30993-3 (1993-12). |
prEN ISO 11111-1-2002 |
纺织机械安全要求第1部分:一般要求 |
Textile machinery - Safety requirements - Part 1: Common requirements (ISO/DIS 11111-1:2002) |
prEN ISO 11111-2-2002 |
纺织机械安全要求第2部分:纺纱准备机和纺纱机 |
Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO/DIS 11111-2:2002) |
prEN ISO 11111-3-2002 |
纺织机械安全要求第3部分:无纺纱机 |
Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO/DIS 11111-3:2002) |
prEN ISO 11111-4-2002 |
纺织机械安全要求第4部分:纱线加工机及制绳机 |
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO/DIS 11111-4:2002) |
prEN ISO 11111-5-2002 |
纺织机械安全要求第5部分:编织和针织准备机 |
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO/DIS 11111-5:2002) |
prEN ISO 11111-6-2002 |
纺织机械安全要求第6部分:织物制造机 |
Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO/DIS 11111-6:2002) |
prEN ISO 11111-7-2002 |
纺织机械安全要求第7部分:印染机和精整机 |
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machines (ISO/DIS 11111-7:2002) |
prEN ISO 11197-2002 |
医用供电装置/注:仅仅适合于与EN 60601-(1990-08)一起使用 |
Medical supply units (ISO/DIS 11197:2002) / Note: Applies only in conjunction with EN 60601-1 (1990-08) |
prEN ISO 11205-2003 |
声学机器和设备发出的噪声用声强法测定工作现场和其它特定位置发出的噪声声压级用 工程法 |
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO/FDIS 11205:2003) |
prEN ISO 11219-1996 |
气瓶气瓶与瓶阀连接用17E锥螺纹检验量规 |
Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges (ISO/DIS 11219:1996) |
prEN ISO 1133-2003 |
塑料 熔体质量流动速率(MFR)和熔体体积流动速率(MFR)的测定 |
Plastics - Determination of the melt-mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO/DIS 1133:2003) / Note: Intended as replacement for EN ISO 1133 (1999-05). |
prEN ISO 11337-2001 |
塑料酰胺用气相色谱法测定e-已内酰胺和w-月桂内酰胺 |
Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO/DIS 11337:2001) |
prEN ISO 11403-2-2002 |
塑料可比多点数据的采集和表示第2部分:热和加工性能 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO/DIS 11403-2:2002) |
prEN ISO 11553-1-2002 |
机械安全激光加工机械安全要求 |
Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02). |
prEN ISO 11611-2003 |
焊接及相关工艺用防护服 |
Protective clothing for use in welding and allied processes (ISO/DIS 11611:2003) |
prEN ISO 11612-2001 |
防护服防热及防火焰用防护服 |
Protective clothing - Clothing to protect against heat and flame (ISO/DIS 11612:2001) |
prEN ISO 11681-1-2002 |
林业机械便携式链锯的安全要求和试验第1部分:林业专用链锯 |
Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 1: Chain-saws for nomal forest work (ISO/DIS 11681-1:2002) |
prEN ISO 11715-1994 |
光学镜片加工用数据载体的数字数据记录 |
Digital data record for data carriers for the processing of spectacle lenses (ISO/DIS 11715:1994) |
prEN ISO 1183-1-2003 |
塑料非泡沫塑料的密度测定方法第1部分:浸液方法液体比重瓶法和滴定法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO/FDIS 1183-1:2003) |
prEN ISO 1183-4-1998 |
塑料非泡沫塑料的密度测定方法第4部分:气体比重瓶法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 4: Gas pyknometer method (ISO/DIS 1183-4:1998) |
prEN ISO 11904-2-2001 |
声学耳朵接收到的来自封闭噪声源的噪声量的测定第2部分:使用人体模型技术(人体模型技术) |
Acoustics - Determination of sound immissions from sound sources placed closed to the ear - Part 2: Technique using a manikin (manikin-technique) (ISO/DIS 11904-2:2001) |
prEN ISO 12009-1994 |
纺织品及纺织制品燃烧性工业用纺织品测定空气过滤器燃烧性的详细工艺可燃性 |
Textiles and textile products - Burning bevaviour - Industrial and technical textiles - Detailed procedure to determine the burning behaviour of air filters - Ignitability (ISO/DIS 12009:1994) |
prEN ISO 1210-1996 |
塑料在与小火源接触中水平与垂直样品燃烧性能的测定 |
Plastics - Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source (ISO/DIS 1210:1996) |
prEN ISO 12100-1-2003 |
机械安全 设计用的基本概念、一般原则 第1部分:基本术语、方法论 |
Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO/FDIS 12100-1:2003) |
prEN ISO 12100-2-2003 |
机械安全 设计用的基本概念、一般原则 第2部分:技术原则 |
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO/FDIS 12100-2:2003) |
prEN ISO 12180-1-1999 |
产品几何量技术规范(GPS)圆柱度第1部分:词汇 |
Geometrical Product Specifications (GPS) - Cylindricity - Part 1: Vocabulary (ISO/DIS 12180-1:1999) |
prEN ISO 12180-2-1999 |
产品几何量技术规范(GPS)圆柱度第2部分:操作员规范 |
Geometrical Product Specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/DIS 12180-2:1999) |
prEN ISO 12181-1-1999 |
产品几何量技术规范(GPS)圆度第1部分:词汇 |
Geometrical Product Specifications (GPS) - Roundness - Part 1: Vocabulary (ISO/DIS 12181-1:1999) |
prEN ISO 12181-2-1999 |
产品几何量技术规范(GPS)圆度第2部分:操作员规范 |
Geometrical Product Specifications (GPS) - Roundness - Part 2: Specification operators (ISO/DIS 12181-2:1999) |
prEN ISO 12226-1-1997 |
焊药第1部分:分类及试验方法 |
Solder pastes - Part 1: Classification and test methods (ISO/DIS 12226-1:1997) |
prEN ISO 12402-1-2003 |
个人救生装置第1部分:A级(SOLAS救生衣)的安全要求 |
Personal flotation devices - Part 1: Lifejackets for seagoing ships; Safety requirements (ISO/DIS 12402-1:2003) |
prEN ISO 12402-2-2003 |
个人救生装置第2部分:B级(海边救生衣、极限条件275牛顿)的安全要求 |
Personal flotation devices - Part 2: Lifejackets for extreme offshore conditions (level 275); Safety requirements (ISO/DIS 12402-2:2003) |
prEN ISO 12402-3-2003 |
个人救生装置第3部分:C级(近海救生衣、150牛顿)的安全要求 |
Personal flotation devices - Part 3: Lifejackets for offshore conditions (level 150); Safety requirements (ISO/DIS 12402-3:2003) |
prEN ISO 12402-4-2003 |
个人救生装置第4部分:D级(内陆/海边救生衣、100牛顿)的安全要求 |
Personal flotation devices - Part 4: Lifejackets for inland/close to shore conditions (level 100); Safety requirements (ISO/DIS 12402-4:2003) |
prEN ISO 12402-5-2003 |
个人救生装置第5部分:E级(飘浮装置、50牛顿)的安全要求 |
Personal flotation devices - Part 5: Buoyancy aids (level 50); Safety requirements (ISO/DIS 12402-5:2003) |
prEN ISO 12402-8-2003 |
个人救生装置第8部分:附属装置的安全要求及试验方法 |
Personal flotation devices - Part 8: Accessories; Safety requirements and test methods (ISO/DIS 12402-8:2003) |
prEN ISO 12402-9-2003 |
个人救生装置第9部分:A至F级救生装置的试验方法 |
Personal flotation devices - Part 9: Test methods (ISO/DIS 12402-9:2003) |
prEN ISO 12567-2-2000 |
门、窗热性能热箱法测定传热系数第2部分:天窗和其他窗 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projection windows (ISO/DIS 12567-2:2000) |
prEN ISO 12707-2000 |
无损检测术语磁粉检测用术语 |
Non destructive testing - Terminology - Terms used in magnetic particle testing (ISO/DIS 12707:2000) |
prEN ISO 12780-1-1999 |
产品几何量技术规范(GPS)平面性第1部分:词汇 |
Geometrical Product Specifications (GPS) - Flatness - Part 1: Vocabulary (ISO/DIS 12780-1:1999) |
prEN ISO 12780-2-2001 |
产品几何量技术规范(GPS)直线性第1部分:操作员规范 |
Geometrical Product Specifications (GPS) - Straightness - Part 2: Specification operators (ISO/DIS 12780-2:2001) |
prEN ISO 12781-1-1999 |
产品几何量技术规范(GPS)平面性第1部分:词汇 |
Geometrical Product Specifications (GPS) - Flatness - Part 1: Vocabulary (ISO/DIS 12781-1:1999) |
prEN ISO 12781-2-1999 |
产品几何量技术规范(GPS)平面性第1部分:操作员规范 |
Geometrical Product Specifications (GPS) - Flatness - Part 2: Specification operators (ISO/DIS 12781-2:1999) |
prEN ISO 12870-2002 |
眼科光学眼镜镜框要求和试验方法 |
Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO/DIS 12870:2002) |
prEN ISO 12957-1-1997 |
土工布及相关产品摩擦特性的测定第1部分:直接剪切试验 |
Geotextiles and geotextile-related products - Determination of the friction characteristics - Part 1: Direct shear test (ISO/DIS 12957-1:1997) |
prEN ISO 12957-2-1997 |
土工布及相关产品摩擦特性的测定第2部分:斜面试验 |
Geotextiles and geotextile-related products - Determination of the friction characteristics - Part 2: Inclined plane test (ISO/DIS 12957-2:1997) |
prEN ISO 13385-1996 |
产品几何量技术规范(GPS)尺寸测量仪:卡尺及测深规设计及计量要求 |
Geometrical product specification (GPS) - Dimensional measuring instruments: Callipers and depth gauges - Design and metrological requirements (ISO/DIS 13385:1996) |
prEN ISO 13426-2-2002 |
土工布及相关产品结构功能强度第2部分:土壤化合物(Geocomposites) |
Geotextiles and geotextile related products - Strength of the structural junctions - Part 2: Geocomposites (ISO/DIS 13426-2:2002) |
prEN ISO 13438-2002 |
土工布及相关产品在提高氧压时抗氧化性测定用筛选试验方法 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation at elevated oxygen pressure (ISO/DIS 13438:2002) |
prEN ISO 13506-1998 |
耐热及火焰防护服连体服装的试验方法用仪器化人体模型预测燃烧损失 |
Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin (ISO/DIS 13506:1998) |
prEN ISO 13564-1996 |
测量自行式卡车视野的试验方法 |
Test method for measuring visibility from self-propelled trucks (ISO/DIS 13564:1996) |
prEN ISO 13590-2003 |
小艇个人艇建造及系统安装要求 |
Small craft - Personal watercraft - Construction and system installation requirements (ISO/FDIS 13590:2003) |
prEN ISO 13707-2000 |
石油和天然气工业往复式压缩机 |
Petroleum and natural gas industries - Reciprocating compressors (ISO/FDIS 13707:2000) |
prEN ISO 13732-3-2002 |
热环境的人类工效学冷表面的阻触摩第3部分:人类工效学数据及应用指南 |
Ergonomics of the thermal environment - Touching of cold surfaces - Part 3: Ergonomics data and guidance for application (ISO/DIS 13732-3:2002) |
prEN ISO 13790-2003 |
建筑物热性能加热用能量的计算 |
Thermal performance of buildings - Calculation of energy use for heating (ISO/FDIS 13790:2003) |
prEN ISO 13791-1995 |
建筑物热性能无机械冷却通风时夏季室内温度一般准则及计算方法 |
Thermal performance of buildings - Internal temperatures in summer of a room without mechanical cooling - General criteria and calculation procedures (ISO/DIS 13791:1995) |
prEN ISO 13792-1997 |
建筑物热性能无机械冷却通风时夏季室内温度简化计算方法的一般准则 |
Thermal performance of buildings - Internal temperatures of a room in summer without mechanical cooling - General criteria for a simplified calculation method (ISO/DIS 13792:1997) |
prEN ISO 13903-1999 |
动物饲料氨基酸含量的测定离子交换色谱法 |
Animal feeding stuffs - Determination of amino acids content - Ion-exchanging chromatographic method (ISO/DIS 13903:1999) |
prEN ISO 13936-1-2002 |
纺织品机织物接缝处纱缐防滑力的测定第1部分:固定缝开口法 |
Textiles - Determination of slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method (ISO/DIS 13936-1:2002) |
prEN ISO 13936-2-2002 |
纺织品机织物接缝处纱缐防滑力的测定第2部分:固定荷载法 |
Textiles - Determination of slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO/DIS 13936-2:2002) |
prEN ISO 13969-2003 |
乳和乳制品微生物抑制剂试验的标准化描述指南 |
Milk and milk products - Guidelines for a standardized description of microbial inhibitor tests (ISO/FDIS 13969:2003) |
prEN ISO 13982-1-2000 |
防粒状化学品用防护服第1部分:提供全身防粒状化学品的化学防护服的性能的要求(5型防护服) |
Protective clothing for use against solid particulate chemicals - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against solid particulate chemicals (type 5 clothing) (ISO/DIS 13982-1:2000) |
prEN ISO 13982-2-1999 |
防粒状化学品用防护服第2部分:悬浮细微粒向服装内渗透性的测试方法 |
Protective clothing for use against solid particulate chemicals - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO/DIS 13982-2:1999) |
prEN ISO 14122-4-2002 |
机器安全接近机器的固定方式第4部分:固定梯子 |
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO/FDIS 14122-4:2002) |