标准号 |
中文名称 |
英文名称 |
| EN 60601-1-6-2004 |
医用电气设备.第1-6部分:安全的通用要求.并列标准:使用性 |
|
| EN 60601-1-8-2004 |
医疗电气设备.第1-8部分:安全的一般要求.并列标准:医疗电气设备和医疗电气系统中警报系统的一般要求、试验和指南 |
|
| EN 60601-2-11-1997 |
医疗电气设备第2-11部分：γ射束治疗设备安全专用要求 |
Medical electrical equipment - Part 2-11: Particular requirements for the safety of gamma beam therapy equipment (IEC 60601-2-11:1997) |
| EN 60601-2-11-2004 |
医疗电气设备.第2-11部分:γ射线治疗设备安全的特殊要求 |
|
| EN 60601-2-16-1998 |
医疗电气设备第2－16部分：血液透析、血液滤净、血液滤过设备安全的特殊要求 |
Medical electrical equipment - Part 2-16: Particular requirements for the safety of haemodialysis, haemodiafiltration and haemofiltration equipment (IEC 60601-2-16:1998) |
| EN 60601-2-17-2004 |
医用电气设备.第2-17部分:自动控制近距放射治疗后装设备安全的特殊要求 |
|
| EN 60601-2-2-2000 |
医疗电气设备第2－2部分： 高频手术设备安全专用要求 |
Medical electrical equipment - Part 2-2: Particular requirements for the safety of high frequency surgical equipment (IEC 60601-2-2:1998) |
| EN 60601-2-20-1996 |
医疗电气设备第2－20部分：运输培养箱安全专用要求 |
Medical electrical equipment - Part 2-20: Particular requirements for safety of transport incubators (IEC 60601-2-20:1990 + A1:1996) |
| EN 60601-2-22-1996 |
医疗电气设备第2－22部分：诊断和治疗用激光设备安全的特殊要求 |
Medical electrical equipment - Part 2-22: Particular requirements for the safety of diagnostic and therapeutic laser equipment (IEC 60601-2-22:1995) |
| EN 60601-2-23-2000 |
医疗电气设备第2－23部分：经皮分压监测设备的安全专用要求 |
Medical electrical equipment - Part 2-23: Particular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment (IEC 60601-2-23:1999) |
| EN 60601-2-24-1998 |
医疗电气设备第2－24部分：输液泵和控制器的特殊安全要求 |
Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998) |
| EN 60601-2-26-2003 |
医用电气设备第2－26部分：脑电图机安全专用要求 |
Medical electrical equipment - Part 2-26: Particular requirements for the safety of electroencephalographs (IEC 60601-2-26:2002) / Note: Endorsement notice |
| EN 60601-2-27-1994 |
医用电气设备第2－27部分：心电图监护设备安全的特殊要求 |
Medical electrical equipment - Part 2: Particular requirements for the safety of electrocardiographic monitoring equipment (IEC 60601-2-27:1994) |
| EN 60601-2-28-1993 |
医用电气设备第2－28部分：医疗诊断用X射线源组件和X射线管组件规范 |
Medical electrical equipment; part 2-28: particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis (IEC 60601-2-28:1993) |
| EN 60601-2-29-1999 |
医疗电气设备第2－29部分：放射疗法模拟器安全的特殊要求 |
Medical electrical equipment - Part 2-29: Particular requirements for the safety of radiotherapy simulators (IEC 60601-2-29:1999) |
| EN 60601-2-30-2000 |
医疗电器设备第2-30部分：自动循环间接血压监视设备和特殊安全要求 |
Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment (IEC 60601-2-30:1999) |
| EN 60601-2-32-1994 |
医用电气设备第2－32部分：X射线设备附属设备安全的特殊要求 |
Medical electrical equipment - Part 2-32: Particular requirements for the safety of associated equipment of X-ray equipment (IEC 60601-2-32:1994) |
| EN 60601-2-33-2002 |
医疗电气设备第2－33：部分：医疗诊断用磁共振设备安全专用规范 |
Medical electrical equipment - Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis (IEC 60601-2-33:2002) / Note: Endorsement notice |
| EN 60601-2-34-2000 |
医疗电器设备第2－34部分：直接血压监视设备安全特殊要求. |
Medical electrical equipment - Part 2-34: Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment (IEC 60601-2-34:2000) |
| EN 60601-2-35-1996 |
医用电气设备第2－35部分：医用电热毯、褥和垫安全的特殊要求. |
Medical electrical equipment - Part 2-35: Particular requirament for the safety of blanket, pads and mattresses, intended for heating in medical use(IEC 601-35:1996) |
| EN 60601-2-36-1997 |
医疗电气设备第2－36部分：体外碎石机的安全特殊要求 |
Medical electrical equipment - Part 2-36: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy (IEC 60601-2-36:1997) |
| EN 60601-2-37-2001 |
医疗电气设备第2－37部分：超声医疗诊断和监护设备安全的特殊要求 |
Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment (IEC 60601-2-37:2001) |
| EN 60601-2-39-1999 |
医疗电气设备第2－39部分：腹膜透析设备安全专用要求 |
Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment (IEC 60601-2-39:1999) |
| EN 60601-2-4-2003 |
医疗电气设备第2-4部分：心脏除纤维颤动器安全性的特殊要求 |
Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiac defibrillators (IEC 60601-2-4:2002) / Note: Endorsement notice |
| EN 60601-2-40-1998 |
医疗电气设备第2－40部分：电子机动描记器及诱发反映设备安全专用要求 |
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromygraphs and evoked response equipment (IEC 60601-2-40:1998) |
| EN 60601-2-41-2000 |
医疗电气设备第2－41部分：外科手术灯和诊断用灯光的安全专用要求 |
Medical electrical equipment - Part 2-41: Particular requirements for the safety of surgical luminaires and luminaires for diagnosis (IEC 60601-2-41:2000) |
| EN 60601-2-43-2000 |
医疗电气设备第2－43部分：介入过程用Ｘ射线设备安全专用要求 |
Medical electrical equipment - Part 2-43: Particular requirements for the safety of X-ray equipment for interventional procedures (IEC 60601-2-43:2000) |
| EN 60601-2-45-2001 |
医用电气设备第2－45部分：乳腺X射线摄影设备和乳腺摄影立体定位器安全专用要求 |
Medical electrical equipment - Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices (IEC 60601-2-45:2001) |
| EN 60601-2-46-1998 |
医用电气设备第2－46部分：手术台安全专用要求 |
Medical electrical equipment - Part 2-46: Particular requirements for the safety of operating tables (IEC 60601-2-46:1998) |
| EN 60601-2-47-2001 |
医用电气设备第2－47部分：不卧床的心电描记系统安全（包括主要性能）的特殊要求 |
Medical electrical equipment - Part 2-47: Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems (IEC 60601-2-47:2001) |
| EN 60601-2-49-2001 |
医用电气设备第2-49部分：多功能病人监护设备安全的特殊要求 |
Medical electrical equipment - Part 2-49: Particular requirements for the safety of multifunction patient monitoring equipment (IEC 60601-2-49:2001) |
| EN 60601-2-5-2000 |
医疗电气设备第2－5部分：超声治疗设备安全专用要求 |
Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment (IEC 60601-2-5:2000) |
| EN 60601-2-50-2002 |
医用电气设备第2－50部分：婴儿光治疗设备安全专用要求 |
Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment (IEC 60601-2-50:2000 + Corrigendum March 2001) |
| EN 60601-2-51-2003 |
医用电气设备第2-51部分：包括记录和分析单道与多道心电图扫描器主要性能在内的安全性特殊要求 |
Medical electrical equipment - Part 2-51: Particular requirements for the safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs (IEC 60601-2-51:2003) / Note: Endorsement notice |
| EN 60601-2-7-1998 |
医疗电气设备第2－7部分：诊断X射线发生装置的高压发生器安全专用要求 |
Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators (IEC 60601-2-7:1998) |
| EN 60601-2-9-1996 |
医用电器设备第2－9部分：放射治疗中与患者接触的计量仪与辐射探测器连接的安全专用要求 |
Medical electrical equipment - Part 2-9: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors (IEC 60601-2-9:1996) |
| EN 60601-3-1-1996 |
医疗电气设备第3－1部分：经皮氧分压和二氧化碳分压监护基本性能要求 |
Medical electrical equipment - Part 3-1: Essential performance requirement for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment (IEC 60601-3-1:1996) |
| EN 60601/prAB-1992 |
医用电气设备第1部分：安全通用要求修改草案ＡＢ |
Medical electrical equipment; part 1: general requirements for safety |
| EN 60603-1-1998 |
印制板用频率低于3MHz的连接器第１部分：通用规范带有评估的质量的详细规范的制订指南和通用要求 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality (IEC 60603-1:1991 + A1:1992) |
| EN 60603-10-1998 |
印制板用频率低于3MHz的连接器第１０部分：倒置型2.54mm(0.1in)基本网格印制电路板用两对端连接器 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type (IEC 60603-10:1991) |
| EN 60603-12-1998 |
印制板用频率低于3MHz的连接器第12部分：为集成电路用的插座尺寸、一般要求和试验的详细规范 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits (IEC 60603-12:1992) |
| EN 60603-13-1998 |
印制电路板用频率低于3MHz的连接器第13部分：不易卸绝缘可置换终端用带独立连接器的2.54mm(0.1in)基本网 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation disp |
| EN 60603-14-1999 |
印制板用频率低于3MHz的连接器第14部分：象音频、视频和视听设备一样的低频声音和视频信号用环形连接器的 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment (IEC 60603-14:1998) |
| EN 60603-2-1998 |
印制板用频率低于3MHz的连接器第2部分：共有固定特性的2.54mm(0.1in)基本网格的印制板用的评定质量的两部 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995) |
| EN 60603-3-1998 |
印制板用频率低于3MHz的连接器第３部分：触点中心相隔距离和交错线端子相隔距离均为2.54mm(0.100in)的印 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (O.1 in) centres and staggered terminations at that same spacing (IEC 60603-3:1987) |
| EN 60603-4-1998 |
印制板用频率低于3MHz的连接器第4部分：触点中心相隔距离和交错线端子相隔距离均为1·91mm(0·75in)的印 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing (IEC 60603-4:1987) |
| EN 60603-5-1998 |
印制板用频率低于3MHz的连接器第5部分：有2.54mm(0.10in)间隔的两面印制电路板用边缘插接器和两对端连接 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987) |
| EN 60603-6-1998 |
印制板用频率低于3MHz的连接器第6部分：标称厚度为1.6mm(0.063in)单面或双面印制板用间隔距离为2·54mm(0 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 6 |
| EN 60603-7-1-2002 |
用于印制电路板的3MHz以下频率连接器 第7－１部分：有质量评定的具通用插合特 性包括固定和自由连接器的8 |
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality (IEC 60603-7-1:2002) / Note: Endorsement notice |
| EN 60603-7-1997 |
用于印制电路板的3MHz以下频率连接器 第7部分：有质量评定的具通用插合特 性包括固定和自由连接器的8位连 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality (IEC 60603-7:1996) |
| EN 60603-7-7-2002 |
电子设备连接器第7-7部分：数据传输频率达 600 MHz (第 7种、 屏蔽式) 的8道、屏蔽式、活动和固定连接器 |
Connectors for electronic equipment - Part 7-7: Detail specification for 8 way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz (category 7, shielded) (IEC 60603-7-7:2002) / Note: Endorsement notice |
| EN 60603-7/prA1-1998 |
用于印制电路板的3MHz以下频率连接器 第7部分：有质量评定的具通用插合特 性包括固定和自由连接器的8位连 |
Amendment to IEC 60603-7: Detail specification for 8 way connectors, with assessed quality, including fixed and free connectors with common mating features - Test methods and related requirements for use at frequencies up to 100 MHz |
| EN 60603-8-1998 |
印制板用频率低于3MHz的连接器第8部分：具有0.63mm×0.63mm方形插头的2.54mm(0.1in)基本网格印制电路板用 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm (IEC 60603-8:1990) |
| EN 60603-9-1998 |
印制板用频率低于3MHz的连接器第９部分：2.54mm(0.1in)基本网格印制电路板、底板和电缆连接器用两对端连 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990) |
| EN 60604-1993 |
“顶闪－触闪”摄影灯组 |
Topflash/Flipflash photographic flash lamp array (IEC 60604:1980) |
| EN 60609-2-1999 |
水轮机蓄能泵和水泵水轮机气蚀损坏的评定第２部分：水斗式水轮机的评定 |
Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines (IEC 60609-2:1997) |
| EN 60613-1990 |
医用诊断旋转阳极Ｘ射线管的电、热和负载特性 |
Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis |
| EN 60617-10-1996 |
简图用图形符号 第10部分：电信传输 |
Graphical symbols for diagrams - Part 10: Telecommunications: Transmission (IEC 60617-10:1996) |
| EN 60617-11-1996 |
简图用图形符号第１１部分：建筑与地形的安装平面图和简图 |
Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams (IEC 60617-11:1996) |
| EN 60617-12-1998 |
简图用图形符号第１２部分：二进制逻辑件 |
Graphical symbols for diagrams - Part 12: Binary logic elements (IEC 60617-12:1997) |
| EN 60617-13-1993 |
图表用图形符号第13部分：模拟件 |
Graphical symbols for diagrams; Part 13: Analogue elements (IEC 60617-13:1993) |
| EN 60617-2-1996 |
简图用图形符号第２部分：符号要素、限定符号和常用的其它符号 |
Graphical symbols for diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application (IEC 60617-2:1996) |
| EN 60617-3-1996 |
简图用图形符号第３部分：导体和连接器件 |
Graphical symbols for diagrams - Part 3: Conductors and connecting devices (IEC 60617-3:1996) |
| EN 60617-4-1996 |
图表用图形符号第４部分：基础无源组件 |
Graphical symbols for diagrams - Part 4: Basic passive components (IEC 60617-4:1996) |
| EN 60617-5-1996 |
简图用图形符号第５部分：半导体和电子管 |
Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes (IEC 60617-5:1996) |
| EN 60617-6-1996 |
简图用图形符号第6部分：电能的发生和转换 |
Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy (IEC 60617-6:1996) |
| EN 60617-7-1996 |
简图用图形符号第７部分：开关设备、控制设备和保护装置 |
Graphical symbols for diagrams - Part 7: Switchgear, control gear and protective devices (IEC 60617-7:1996) |
| EN 60617-8-1996 |
简图用图形符号第８部分：测量仪器、灯和信号装置 |
Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices (IEC 60617-8:1996) |
| EN 60617-9-1996 |
制图用图形符号第9部分：电信：交换和外围设备 |
Graphical symbols for diagrams - Part 9: Telecommunications: Switching and peripheral equipment (IEC 60617-9:1996) |
| EN 60622-2003 |
含有碱性或非酸性电解液的蓄电池和蓄电池组密封隔镍棱柱形可充电单体电池 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells (IEC 60622:2002) / Note: Endorsement notice |
| EN 60623-2001 |
可再充电的开启式柱形镍-镉电池 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells (IEC 60623:2001) |
| EN 60626-2-1995 |
电气绝缘用复合柔软材料规范第2部分：试验方法 |
Combined flexible materials for electrical insulation - Part 2: Methods of test (IEC 60626-2:1995) |
| EN 60627-2001 |
诊断用Ｘ－射线 成像设备通用和大图形防散射滤栅的特征 |
Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids (IEC 60627:2001) |
| EN 60633-1999 |
高压直流电路(HVDC)传输用术语 |
Terminology for high-voltage direct current (HVDC) transmission (IEC 60633:1998) |
| EN 60634-1995 |
灯具热试验用热试验源(H.T.S)灯 |
Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires (IEC 60634:1993) |
| EN 60641-1-1995 |
电工用压纸板和薄纸板规范板第1部分：一般要求和定义 |
Specification for pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements (IEC 60641-1:1979 + A1:1993) |
| EN 60641-2-1995 |
电工用压纸板和薄纸板规范板第２部分：试验方法 |
Specification for pressboard and presspaper for electrical purposes - Part 2: Methods of test (IEC 60641-2:1979 + Corrigendum 1994 + A1:1993) |
| EN 60641-3-1-1994 |
电气用层压纸板和层压纸规范第3部分：.专用材料规范 活页1:B.0.1,B.2.1,B.2.3,B.3.1,B.3.3,B.4.1,B.4.3,B |
Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1 (IEC 60641-3-1:1994 |
| EN 60641-3-2-1994 |
电气用层压纸板和层压纸规范第3部分：专用材料规范 活页2:P.2.1,P.4.1,P.4.2,P. 4.3,P.6.1和P.7.1层压纸 |
Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1 (IEC 60641-3-2:1992) |
| EN 60644-1993 |
电动机电路用高压熔断体规范 |
Specification for high-voltage fuse-links for motor circuit applications (IEC 60644:1979) |
| EN 60645-1-2001 |
测听计第1部分：纯音测听计 |
Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers (IEC 60645-1:2001) |
| EN 60645-2-1997 |
测听计第2部分：语音测听装置 |
Audiometers - Part 2: Equipment for speech audiometry (IEC 60645-2:1993) |
| EN 60645-3-1995 |
测听计第3部分：声学和耳神经学用短持续试验信号 |
Audiometers - Part 3: Auditory test signals of short duration for audiometric and neuro-otological purposes (IEC 60645-3:1994) |
| EN 60645-4-1995 |
测听计第4部分：高频声学设备 |
Audiometers - Part 4: Equipment for extended high-frequency audiometry (IEC 60645-4:1994) |
| EN 60646-1998 |
坩锅感应炉的试验方法 |
Test methods for crucible induction furnaces (IEC 60646:1992) |
| EN 60652-2004 |
架空线路结构的负载试验 |
|
| EN 60654-1-1993 |
工业过程测量和控制设备运行条件第1部分：气候条件 |
Industrial-process measurement and control equipment- Operating conditions- Part 1: Climatic conditions (IEC 60654-1:1993) |
| EN 60654-2-1997 |
工业过程测量和控制设备的操作条件第２部分：动力 |
Operating conditions for industrial-process measurement and control equipment - Part 2: Power (IEC 60654-2:1979 + A1:1992) |
| EN 60654-3-1997 |
工业过程测量和控制设备的操作条件第３部分：.机械影响 |
Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences (IEC 60654-3:1983) |
| EN 60654-4-1997 |
工业过程测量和控制设备的操作条件第４部分：腐蚀和侵蚀影响 |
Operating conditions for industrial-process measurement and control equipment - Part 4: Corrosive and erosive influences (IEC 60654-4:1987) |
| EN 60660-1999 |
标称电压1000V至300KV(不含)系统用有机材料户内支柱 |
Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999) |
| EN 60662/prA8-1995 |
高压钠蒸气灯 修改８ |
Amendment 8 to IEC 662: High-pressure sodium vapour lamps |
| EN 60662/prAA-1993 |
高压钠蒸气灯弱电压的测量规程修改草案ＡＡ |
HPS lamp drop-out voltage measurement procedure |
| EN 60664-1-2003 |
低压系统设备的绝缘配位第1部分：原则、要求和试验 |
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:1992 + A1:2000 + A2:2002) / Note: Endorsement notice |
| EN 60664-3-2003 |
低压系统内设备的绝缘配合第3部分：防污染涂料、封装式模制的使用 |
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60064-3:2003) / Note: Endorsement notice |
| EN 60664-5-2003 |
低压系统内设备的绝缘配位第5部分：测定间隙和表面漏泄距离等于或小于2毫米的综合方法 |
Insulation coordination for equipment within low-voltage systems - Part 5: A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm (IEC 60664-5:2003) / Note: Endorsement notice |
| EN 60669-2-2-1997 |
家用和类似用途固定式电器开关第2部分：特殊要求第2节：电磁遥控开关 |
Switches for household and similar fixed electrical installations - Part 2: Particular requirements - Section 2: Electromagnetic remote-control switches (RCS) (IEC 60669-2-2:1996) / Note: Withdrawn by mistake |
| EN 60669-2-3-1997 |
家用和类似用途的固定电器设备开关第２－３部分：特殊要求时间延迟开关 |
Switches for household and similar fixed-electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS) (IEC 60669-2-3:1997) |
| EN 60672-1-1995 |
陶瓷和玻璃绝缘材料第1部分：定义和分类 |
Ceramic and glass insulating materials - Part 1: Definitions and classification (IEC 60672-1:1995) |
| EN 60672-2-2000 |
陶瓷和玻璃绝缘材料第2部分：试验方法 |
Ceramic and glass insulating materials - Part 2: Methods of test (IEC 60672-2:1999) |
| EN 60672-3-1997 |
陶瓷和玻璃绝缘材料第3部分：专用材料规范 |
Ceramic and glass-insulating materials - Part 3: Specifications for individual materials (IEC 60672-3:1997) |
| EN 60674-1-1998 |
电工用塑料薄膜规范第１部分：定义和一般要求 |
Specification for plastic films for electrical purposes - Part 1: Definitions and general requirements (IEC 60674-1:1980) |
| EN 60674-3-1-1998 |
电工用塑料薄膜规范第３部分：单项材料规范活页１：电容器用双轴定向聚丙烯薄膜 |
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998) |
| EN 60674-3-2-1998 |
电气用塑料薄膜规格第3部分：.专用材料的规格活页2：对电气绝缘用平衡双轴定聚对苯二甲酸乙二醇酯薄膜 |
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation (IEC 60674-3-2:1992) |
| EN 60674-3-3-1998 |
电气用塑料薄膜规格第3部分：专用材料的规格活页3：对电气绝缘用聚碳酸酯薄膜的要求 |
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:1992) |
| EN 60674-3-4 bis 6-1995 |
电气用塑料薄膜规格第3部分：专用材料的规格活页4至6：对电气绝缘用聚酰亚胺薄膜要求 |
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation (IEC 60674-3-4 to 6:1993) |
| EN 60674-3-7-1998 |
电气用塑料薄膜规格 第3部分：专用材料的规格活页7：对电气绝缘用氟乙烯-丙烯薄膜的要求 |
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992) |
| EN 60676-2002 |
电热装置直接电弧炉的试验方法注释：认可文件 |
Industrial electroheating equipment - Test methods for direct arc furnaces (IEC 60676:2002) / Note: Endorsement notice |
| EN 60679-3-2001 |
经质量评估的石英晶体震荡器第3部分：标准外形和引线连接 |
Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections (IEC 60679-3:2001) |
| EN 60679-4-1-1998 |
经质量评估的石英晶体受控振荡器第4-1部分：空白详细规范性能鉴定 |
Quartz crystal controlled oscillators of assessed quality - Part 4-1: Blank detail specification - Capability approval (IEC 60679-4-1:1998) |
| EN 60679-4-1998 |
石英晶体受控振荡器第4部分：.分规范能力鉴定 |
Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional specification - Capability approval (IEC 60679-4:1997) |
| EN 60679-5-1-1998 |
经质量评估的石英晶体受控振荡器第5-1部分：空白详细规范鉴定批准 |
Quartz crystal controlled oscillators of assessed quality - Part 5-1: Blank detail specification - Qualification approval (IEC 60679-5-1:1998) |
| EN 60679-5-1998 |
经质量评估的石英晶体受控振荡器第5部分：分规范鉴定批准 |
Quartz crystal controlled oscillators of assessed quality - Part 5: Sectional specification - Qualification approval (IEC 60679-5:1998) |
| EN 60684-1-2003 |
绝缘软套管规范第1部分：定义和一般要求 |
Flexible insulating sleeving - Part 1: Definitions and general requirements (IEC 60684-1:2003) / Note: Endorsement notice |
| EN 60684-3-100 bis 105-2001 |
绝缘软管第3部分：各种型号软管规范活页100至105：挤压聚氯乙烯(PVC)软管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001) |
| EN 60684-3-116 bis 117-2003 |
绝缘软套管第3部分：个别型号套管规范活页116和117：挤压聚氯丁烯通用用途 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3-116 and 117:2003) / Note: Endorsement notice |
| EN 60684-3-121 bis 124-2001 |
绝缘软管第3部分：各种型号软管规范活页121至124：挤压有机硅软管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 121 to 124: Extruded silicone sleeving (IEC 60684-3-121 to 124:2001) |
| EN 60684-3-136-1998 |
绝缘软套管规范第3部分：套管单型要求规范活页136：可挤压碳氟化合物套管一般用途 |
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose (IEC 60684-3-136:1997) |
| EN 60684-3-145 bis 147-2001 |
绝缘软管第3部分：各种型号软管规范活页145至147：挤压聚四氟乙烯(PTFE)软管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to 147: Extruded PTFE sleeving (IEC 60684-3-145 to 147:2001) |
| EN 60684-3-151-1998 |
绝缘软套管第3部分：单型套管的特殊要求活页151：通用挤压PVC／晴橡胶软管 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose (IEC 60684-3-151:1998) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com