标准号 |
中文名称 |
英文名称 |
EN 1911-3-1998 |
固定源辐射 HCI的人工测定法 第3部分:吸收溶液分析和计算 |
Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation |
EN 1914-1997 |
内河航运船舶 轮船上的小船 |
Inland navigation vessels - Ships boats |
EN 1915-1-2001 |
航行器的地面支撑设备 一般要求 第1部分:基本安全要求 |
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
EN 1915-2-2001 |
航行器的地面支撑设备 一般要求 第2部分:稳定性和强度的要求、计算和试验方法 |
Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
EN 1915-3-2004 |
飞行器地面支持设备.一般要求.第3部分:振动测量方法和减振 |
|
EN 1915-4-2004 |
飞行器地面支持设备.一般要求.第4部分:噪声测量方法和减噪 |
|
EN 1916-2002 |
无钢筋和有钢筋的混凝土管材及管件 |
Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
EN 1917-2002 |
无钢筋和有钢筋的混凝土检修孔和检验室 |
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
EN 1918-1-1998 |
燃气供应系统 地下燃气储存 第1部分:含水土层中燃气储存的功能建议书 |
Gas supply systems - Underground gas storage - Part 1: Functional recommendations for storage in aquifers |
EN 1918-2-1998 |
燃气供应系统 地下燃气储存 第2部分:油田和气田中燃气储存的功能建议书 |
Gas supply systems - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields |
EN 1918-3-1998 |
燃气供应系统 地下燃气储存 第3部分:盐溶洞中燃气储存的功能建议书 |
Gas supply systems - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns |
EN 1918-4-1998 |
燃气供应系统 地下燃气储存 第4部分:岩洞中燃气储存的功能建议书 |
Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns |
EN 1918-5-1998 |
燃气供应系统 地下燃气储存 表面设备的功能建议书 |
Gas supply systems - Underground gas storage - Part 5: Functional recommendations for surface facilities |
EN 1919-2000 |
可运输气瓶 液化气瓶(已炔气和液化石油气除外) 灌充时的检验 |
Transportable gas cylinders - Cylinders for liquefied gases (excluding acetylene and LPG) - Inspection at time of filling |
EN 1920-2000 |
可运输气瓶 液化气瓶(已炔气除外) 灌充时的检验 |
Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling |
EN 1922-1997 |
信息技术 与电传业务配合的字符指令表和编码 |
Information technology - Character repertoire and coding for interworking with Telex services |
EN 1923-1998 |
欧洲字符集及其编码 8位单字节编码 |
European character repertoires and their coding - 8 bit single byte coding |
EN 1925-1999 |
天然石料试验方法 毛细管作用吸水率的测定 |
Natural stone test methods - Determination of water absorption coefficient by capillarity |
EN 1926-1999 |
天然石料试验方法 抗压强度的测定 |
Natural stone test methods - Determination of compressive strength |
EN 1928-2000 |
防水挠性薄板 屋顶防水用沥青、 塑料和橡胶薄板 不透水性的测定 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness |
EN 1929-1-1998 |
蓝筐式手推车 第1部分:有或无儿童乘坐设备的蓝式手推车的要求和试验 |
Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without child carrying facility |
EN 1929-2-2004 |
超市购物车.第2部分:用于载客传送带的带或不带儿童座位的超市购物车的要求、试验和检验 |
|
EN 1930-2000 |
儿童保育品 安全障碍 安全要求和试验方法 |
Child care articles - Safety barriers - Safety requirements and test methods |
EN 1932-2001 |
外面百叶窗和百叶窗 耐风能力 试验方法 |
External blinds and shutters - Resistance to wind loads - Method of testing |
EN 1933-1998 |
室外面百叶窗 耐积水能力 试验方法 |
Exterior blinds - Resistance to load due to water accumulation - Test method |
EN 1934-1998 |
建筑物的热性能 采用热流计热箱法测定热阻 圬工 |
Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry |
EN 1935-2002 |
建筑五金器具 单轴铰链 要求和试验方法 |
Building hardware - Single-axis hinges - Requirements and test methods |
EN 1936-1999 |
天然石料试验方法 实际密度和表观密度的测定及总孔隙度和外部孔隙度的测定 |
Natural stone test methods - Determination of real density and apparent density, and of total and open porosity |
EN 1937-1999 |
使水硬地板光滑和/或平整的化合物的试验方法 标准混合程序 |
Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures |
EN 1938-1998 |
人的眼睛保护 摩托车和机动脚踏两用车使用者的护目镜 |
Personal eye protection - Goggles for motorcycle and moped users |
EN 1939-2003 |
自粘合带 剥离粘合力特性测量 |
Self adhesive tapes - Determination of peel adhesion properties |
EN 1940-1996 |
自粘合带 抗断强度的测量 |
Self adhesive tapes - Measurement of breaking strength |
EN 1941-1996 |
自粘合带 断裂时伸长度的测量 |
Self adhesive tapes - Measurement of elongation at break |
EN 1942-2003 |
自粘合带 厚度测量 |
Self adhesive tapes - Measurement of thickness |
EN 1943-2002 |
自粘合带 静态剪切附着力的测量 |
Self adhesive tapes - Measurement of static shear adhesion |
EN 1944-1996 |
自粘合带 低速剥离附着力的测量 |
Self adhesive tapes - Measurement of unwind adhesion at low speed |
EN 1945-1996 |
自粘合带 快速粘着力的测量 |
Self adhesive tapes - Measurement of quick stick |
EN 1946-1-1999 |
建筑产品和件热性能 试验室测量热传递性能评估的特殊标准 第1部分:通用标准 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria |
EN 1946-2-1999 |
建筑产品和件热性能 试验室测量热传递性能评估的特殊标准 第2部分:用保护热平板法测量 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method |
EN 1946-3-1999 |
建筑产品和件热性能 试验室测量热传递性能评估的特殊标准 第3部分:用热流量计法测量 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method |
EN 1946-4-2000 |
建筑产品和件热性能 试验室测量传热传递性能评估的特殊标准 第4部分:用芯盒造型法测量 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods |
EN 1946-5-2000 |
建筑产品和件热性能 试验室测量传热传递性能评估的特殊标准 第5部分:导管试验法测量 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods |
EN 1947-2002 |
消防软管 水泵及车辆用半刚性输送水软管组装件 |
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
EN 1948-1-1996 |
固定源排放 PCDDs/PCDFs的质量浓度测定 第1部分:取样 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 1: Sampling |
EN 1948-2-1996 |
固定源排放 PCDDs/PCDFs的质量浓度测定 第2部分:萃取和提纯 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up |
EN 1948-3-1996 |
固定源排放 PCDDs/PCDFs的质量浓度测定 第3部分:识别及定量化 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification |
EN 1949-2002 |
旅游居住车及其它道路车辆中居住用LPG系统的安装规范 |
Specification for the installation of LPG-systems for habitation purposes in leisure accommodation vehicles and other road vehicles |
EN 1953-1998 |
涂覆材料的雾化和喷涂设备 安全要求 |
Atomising and spraying equipment for coating materials - Safety requirements |
EN 1957-2000 |
家庭用具 床和床垫 测定功能特性的试验方法 |
Domestic furniture - Beds and mattresses - Test methods for the determination of functional characteristics |
EN 196-1-1994 |
测试水泥的方法 第1部分:强度测定 |
Methods of testing cement - Part 1: Determination of strength |
EN 196-2-1994 |
测试水泥的方法 第2部分:水泥的化学分析 |
Methods of testing cement - Part 2: Chemical analysis of cement |
EN 196-21-1989 |
测试水泥的方法 水泥中氯化物、二氧化碳和碱含量的测定 |
Methods of testing cement - Determination of the chloride, carbon dioxide and alkali content of cement |
EN 196-6-1989 |
测试水泥的方法 细度的测定 |
Methods of testing cement - Determination of fineness |
EN 196-7-1989 |
测试水泥的方法 水泥试样的取样和准备方法 |
Methods of testing cement - Methods of taking and preparing samples of cement |
EN 196103-1998 |
空白详细规范:旋转式开关评定水平Y |
Blank detail specification: Rotary switches - Assessment level Y |
EN 1963-1997 |
铺地织物 使用柔软踏轮机的试验 |
Textile floor coverings - Tests using the Lisson Tretrad Machine |
EN 1964-2-2001 |
可运输气瓶 水容量从0,5L到150L(包括150L)的可再灌装的可运输无缝钢制气瓶的设计和结构规范 第2部分:Rm |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel With and Rm V |
EN 1964-3-2000 |
可运输气瓶 水容量从0,5L到150L(包括150L)的可再灌装的可运输无缝钢制气瓶的设计和结构规范 第3部分:Rm |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacity from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel With |
EN 196403-1998 |
空白详细规范:按钮开关评定水平Y |
Blank detail specification: Push button switches - Assessment level Y |
EN 1965-1-2001 |
建筑粘合剂 腐蚀 第1部分:对铜粘合对象腐蚀度的测定和分类 |
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
EN 1965-2-2001 |
建筑粘合剂 腐蚀 第2部分:对黄铜粘合对象腐蚀度的测定和分类 |
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
EN 196500*EN 196501-1993 |
分规范:包括空白详细规范的膜开关 |
Sectional specification: membrane switches including blank detail specification EN 196501 |
EN 1966-2002 |
建筑粘合剂 通过三点挠曲法测量粘合力描述表面特性 |
Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method |
EN 1967-2002 |
建筑粘合剂 使用与活动滚筒粘合方法有联系的潮湿剥离试验对铝表面处理效用的评估 |
Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
EN 1968-2002 |
可运输气瓶 无缝钢瓶的定期检验和试验 |
Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders |
EN 1969-2000 |
运动场地面 人造运动地面厚度的测定 |
Surfaces for sports areas - Determination of thickness of synthetic sports surfaces |
EN 197-1-2000 |
水泥 第1部分:普通水泥的成分、规范和合格判据 |
Cement - Part 1: Composition, specifications and conformity criteria for common cements |
EN 197-1-2004 |
水泥.第1部分:普通水泥的组分、规范和合格标准 |
|
EN 197-1/prA1-2003 |
水泥 第3部分:低热普通水泥的成分、规范和合格判据 |
Cement - Part 1: Composition, specifications and conformity criteria for common cements; Amendment A1 / Note: Intended as an amendment to EN 197-1 (2000-06). |
EN 197-2-2000 |
水泥 第2部分:合格评价 |
Cement - Part 2: Conformity evaluation |
EN 197-4-2004 |
水泥.第4部分:低早硬强度高炉水泥的组分、规范和合格标准 |
|
EN 1970-2000 |
伤残人用可调床 要求与试验方法 |
Adjustable beds for disabled persons - Requirements and test methods |
EN 1971-1998 |
铜和铜合金 管的涡流试验 |
Copper and copper alloys - Eddy current test for tubes |
EN 1972-1997 |
潜水辅助设备 通气管 安全设备和试验方法 |
Diving accessories - Snorkels - Safety requirements and test methods |
EN 1974-1998 |
食品加工机械 切片机 安全和卫生要求 |
Food processing machinery - Slicing machines - Safety and hygiene requirements |
EN 1975/prA1-2003 |
可运输气瓶 容积从0.5L至150L可再灌装可运输无缝铝和铝合金气体瓶设计和结构规范 修改A1 |
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; Amendment A1 / Note: Intended as an amendment to EN |
EN 1976-1998 |
铜及铜合金 未最后成形的铜铸件产品 |
Copper and copper alloys - Cast unwrought copper products |
EN 1977-1998 |
铜及铜合金 铜拉制坯料(绕材) |
Copper and copper alloys - Copper drawing stock (wire rod) |
EN 1978-1998 |
铜及铜合金 铜阴极 |
Copper and copper alloys - Copper cathodes |
EN 1979-1999 |
塑料管道和管道系统 热塑螺旋型结构壁的管材 接缝拉伸强度的测定 |
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
EN 198-1987 |
丙烯酸材料制造的家用成品浴室规范 |
Specification for finished baths for domestic purposes made of acrylic material |
EN 1981-2003 |
铜及铜合金 母合金 |
Copper and copper alloys - Master alloys |
EN 1982-1998 |
铜和铜合金 铸锭和铸件 |
Copper and copper alloys - Ingots and castings |
EN 1984-2000 |
工业阀门 钢制阀门 |
Industrial valves - Steel gate valves |
EN 1985-1998 |
助步器 一般要求和试验方法 |
Walking aids - General requirements and test methods |
EN 1986-1-1997 |
电动道路车辆 能量特性测量 第1部分:纯电动车辆 |
Electrically propelled road vehicles - Measurement of energy performances - Part 1: Pure electric vehicles |
EN 1986-2-2001 |
电动道路车辆 能量特性测量 第2部分:热能电能混合车辆 |
Electrically propelled road vehicles - Measurement of energy performances - Part 2: Thermal electric hybrid vehicles |
EN 1987-1-1997 |
电动道路车辆 安全的特殊要求 第1部分:车载能量储存 |
Electrically propelled road vehicles - Specific requirements for safety - Part 1: On board energy storage |
EN 1987-2-1997 |
电动道路车辆 安全的特殊要求 第2部分:功能安全措施和失效防护 |
Electrically propelled road vehicles - Specific requirements for safety - Part 2: Functional safety means and protection against failures |
EN 1987-3-1998 |
电动道路车辆 安全的特殊要求 第3部分:防止使用者被电伤害的保护 |
Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards |
EN 1988-1-1998 |
食品 亚硫酸盐的测定 第1部分:最佳Monier-Williams法 |
Foodstuffs - Determination of sulfite - Part 1: Optimized Monier-Williams method |
EN 1988-2-1998 |
食品 亚硫酸盐的测定 第2部分:酶催法 |
Foodstuffs - Determination of sulfite - Part 2: Enzymatic method |
EN 1989-2000 |
热塑性管道系统 埋地无压污水用接头 通过估计密封压力对热塑弹性塑料(TPE)密封接头的长时间密封性能的试 |
Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
EN 1990-2002 |
欧洲法典 结构设计的基础 |
Eurocode - Basis of structural design |
EN 1991-1-1-2002 |
欧洲法典1:对结构的影响 第1-1部分:一般影响 建筑物的密度、自重和强加负荷 |
Eurocode 1: Actions on structures - Part 1-1: General actions; Densities, self-weight and imposed loads for buildings |
EN 1991-1-2-2002 |
欧洲法典 1:对结构的影响 第1-2部分:一般影响 对易发生火灾环境的结构的影响 |
Eurocode 1: Actions on structures - Part 1-2: General actions; Actions on structures exposed to fire |
EN 1991-1-3-2003 |
欧洲法典1:对结构上的影响 第1-3部分:一般影响 雪负荷 |
Eurocode 1 - Actions on structures - Part 1-3: General actions; Snow loads |
EN 1991-2-2003 |
欧洲规范1:对结构上的影响 第2部分:桥梁上的通行荷载 |
Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges |
EN 1992-1-1-2004 |
欧洲法规2.混凝土结构设计.第1-1部分:一般规则和建筑规则 |
|
EN 1995-1-1-2004 |
欧洲法规 5:木材结构设计.第1-1部分:总则.一般原则和建筑原则.德文版本 EN 1995-1-1-2004 |
|
EN 1997-1-2004 |
欧洲法规7:土木技术设计.第1部分:总则 |
|
EN 2-1992 |
火灾的分类 |
Classification of fires |
EN 2-2004 |
火灾分级 |
|
EN 20-1-1992 |
木材防腐剂 对竹粉蠹(Stephens)防护效果的测定 第1部分:运用表面处理法(实验室法) |
Wood preservatives; determination of the protective effectiveness against Lyctus Brunneus (Stephens); part 1: application by surface treatment (laboratory method) |
EN 20-2-1993 |
木材防腐剂 对竹粉蠹(Stephens)防护效果的测定 第2部分:运用浸渍法(实验室法) |
Wood preservatives; determination of the protective effectiveness against Lyctus brunneus (Stephens); part 2: application by impregnation (laboratory method) |
EN 200-1989 |
卫生用水龙头 PN10型单一和混合水龙头(公称尺寸1/2)通用技术规范 最小流动压力0.05MPa(0.5bar) |
Sanitary tapware - General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10; Minimum flow pressure of 0,05 MPa (0,5 bar) |
EN 200-2004 |
卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 |
|
EN 200-2004 |
卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 |
|
EN 2000-1991 |
航空航天系列 质量保证 EN航空航天产品 制造厂商质量体系的批准 |
Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
EN 2004-1-1993 |
航空航天系列 铝和铝合金产品试验方法 第1部分:锻铝合金电导率的测定 |
Aerospace series; test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys |
EN 2004-1-1993 |
航空和航天.铝合铝合金制品的检验方法.锻铝合金导电率的测定 |
|
EN 2004-5-1993 |
航空航天系列 铝和铝合金产品试验方法 第5部分:包层半成品的包层厚度和铜扩散的测定 |
Aerospace series; test methods for aluminium and aluminium alloy products - Part 5: Determination of cladding thickness and copper diffusion of clad semi-finished products |
EN 2004-5-1993 |
航空和航天.铝和铝合金制品的检验方法.电镀半成品时测定镀层厚度和铜渗滤 |
|
EN 2009-1984 |
航空航天系列 轴承飞行器结构用直径系列8和9滚动、刚性、单列球轴承尺寸和负载 等待新设计 见EN3281 |
Bearings-airframe rolling, rigid, single row ball bearings in steel, diameter series 8 and 9, dimensions and loads; Aerospace series; inactive for new design, see EN 3281 |
EN 20105-C01-1992 |
纺织品 色牢度试验 第C01部分:耐洗涤色牢度:试验1 |
Textiles; tests for colour fastness; part C01: colour fastness to washing; test 1 (ISO 105-C01:1989) |
EN 20105-C02-1992 |
纺织品 色牢度试验 第C02部分:耐洗涤色牢度:试验2 |
Textiles; tests for colour fastness; part C02: colour fastness to washing; test 2 (ISO 105-C02:1989) |
EN 20105-C03-1992 |
纺织品 色牢度试验 第C03部分:耐洗涤色牢度:试验3 |
Textiles; tests for colour fastness; part C03: colour fastness to washing; test 3 (ISO 105-C03:1989) |
EN 20105-C04-1992 |
纺织品 色牢度试验 第C04部分::耐洗涤色牢度:试验4 |
Textiles; tests for colour fastness; part C04: colour fastness to washing; test 4 (ISO 105-C04:1989) |
EN 20105-C05-1992 |
纺织品 色牢度试验 第C05部分:耐洗涤色牢度:试验5 |
Textiles; tests for colour fastness; part C05: colour fastness to washing; test 5 (ISO 105-C05:1989) |
EN 20105-N01-1995 |
纺织品 色牢度试验 第N01部分:耐漂白色牢度 次氯酸盐 |
Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite (ISO 105-N01:1993) |