标准号 |
中文名称 |
英文名称 |
EN 12704-1999 |
纸、纸板、包装和易处置卫生品用粘合剂含水胶粘剂起泡性的测定 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
EN 12705-1999 |
皮革和鞋靴材料粘合剂用迁移法对白色或鲜艳色皮革表面颜色变化的测定 |
Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
EN 12706-1999 |
胶粘剂不凝地板光滑剂和/或均化剂的试验方法流动特性的测定 |
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics |
EN 12707-1999 |
塑料桶公称容量为210升、220升和225升的非移动头式(敞口)桶 |
Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l |
EN 12708-2000 |
公称容量为20升至225升的塑料容器用塞/盖封闭系统 |
Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l |
EN 12709-2000 |
塑料桶标称容量20升到120升的非移动头(敞口)桶 |
Plastics drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l |
EN 1271-2004 |
运动场地器材.排球设备.功能和安全要求及试验方法 |
|
EN 12710-1999 |
纤维板柱桶公称容量为15升至250升的带封闭环的可移动头(开口)式桶 |
Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l |
EN 12711-2000 |
钢制桶最小总容量为230升的非移动头(敞口)钢桶 |
Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 230 l |
EN 12713-2000 |
公称容积20升至60升的塑料容器用螺旋帽闭合系统 |
Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l |
EN 12714-2000 |
塑料柱桶额定容量为25升至220升的可移动头(开口)桶 |
Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 220 l |
EN 12715-2000 |
特殊土工作业的实施灌浆 |
Execution of special geotechnical works - Grouting |
EN 12716-2001 |
特殊土工作业的实施喷浆 |
Execution of special geotechnical works - Jet grouting |
EN 12717-2001 |
机床安全钻床 |
Safety of machine tools - Drilling machines |
EN 1272-1998 |
儿童保育产品 连椅桌 安全要求和试验方法 |
Child care articles - Table mounted chairs - Safety requirements and test methods |
EN 12720-1997 |
家具表面耐冷液性能的评定(ISO4211:1979修订) |
Furniture - Assessment of surface resistance to cold liquids (ISO 4211:1979 modified) |
EN 12721-1997 |
家具表面耐湿热性能的评定(ISO4211-2:1993修订) |
Furniture - Assessment of surface resistance to wet heat (ISO 4211-2:1993 modified) |
EN 12722-1997 |
家具表面耐干热性能的评定(ISO4211-3:1993修订) |
Furniture - Assessment of surface resistance to dry heat (ISO 4211-3:1993 modified) |
EN 12723-2000 |
液泵泵和设备的通用术语 定义、参数、字母符号和单位 |
Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units |
EN 12726-2000 |
包装软木塞和回头明显的瓶口用口径为18.5mm的塞软木塞的瓶口 |
Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and temper evident capsules |
EN 12727-2000 |
家具排坐椅强度和耐用性要求和试验方法 |
Furniture - Ranked seating - Test methods and requirements for strength and durability |
EN 12728-1999 |
表面活性剂起泡能力的测定多孔盘打拍法 |
Surface active agents - Determination of foaming power - Perforated disc beating method |
EN 12729-2002 |
防止饮用水回流污染的装置 减压区可控的防回流装置B类A型 |
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B; Type A |
EN 1273-2001 |
儿童保育产品 婴儿助行架 安全要求和试验方法 |
Child care articles - Baby walking frames - Safety requirements and test methods |
EN 12730-2001 |
防水软薄板屋面防水用沥青塑料和橡胶薄板抗静负荷性能的测定 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading |
EN 12732-2000 |
燃气供应系统焊接钢管功能要求 |
Gas supply systems - Welding steel pipework - Functional requirements |
EN 12733-2001 |
农业和林业机械步行电动割草机安全 |
Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
EN 12734-2000 |
灌溉技术可移动灌溉设备用快速连接管技术特性和试验 |
Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing |
EN 12735-1-2001 |
铜和铜合金空调和制冷用无缝圆铜管第1部分:管道系统用管子 |
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
EN 12735-2-2001 |
铜和铜合金空调和制冷用无缝圆铜管第2部分:设备用管子 |
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
EN 12736-2001 |
电动道路车辆用车载充电器充电过程中车辆的在空中噪声声功率级的测定 |
Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
EN 12737-2004 |
预制混凝土产品.家畜用地板横木 |
|
EN 12738-1999 |
生物技术研究、开发和分析用实验室作实验时给动物接种微生物的动物的隔离的指南 |
Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments |
EN 1274-1996 |
热喷涂 粉末、成份、交货技术条件 |
Thermal spraying - Powders - Composition - Technical supply conditions |
EN 1274-2004 |
热喷涂.粉末.成分、交货技术条件 |
|
EN 12740-1999 |
生物技术研究、开发和分析用实验室废料的处理、灭活和检验指南 |
Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste |
EN 12741-1999 |
生物技术研究、开发与分析用实验室生物技术实验室操作指南 |
Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations |
EN 12742-1999 |
果汁和蔬菜汁游离氨基酸含量的测定液体色谱法 |
Fruit and vegetable juices - Determination of the free amino acids content - Liquid chromatographic method |
EN 12743-1999 |
鞋类外底的试验方法抗压能力 |
Footwear - Test methods for outsoles - Compression energy |
EN 12744-1999 |
鞋类内底的试验方法抗脱胶性 |
Footwear - Test methods for insoles - Delamination resistance |
EN 12745-1999 |
鞋类内底的试验方法鞋跟钉系牢度 |
Footwear - Test methods for insoles - Heel pin holding strength |
EN 12746-2000 |
鞋类内底和鞋里帮的试验方法水的吸收性和脱水性 |
Footwear - Test methods for insoles and insocks - Water absorption and desorption |
EN 12747-1999 |
鞋类内底的试验方法抗磨性 |
Footwear - Test methods for insoles - Abrasion resistance |
EN 12748-1999 |
鞋类外底、内底、鞋衬和鞋里帮的试验方法水溶性物质含量 |
Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content |
EN 12749-1999 |
鞋类老化条件 |
Footwear - Ageing conditioning |
EN 1275-1997 |
化学消毒剂和防腐剂 碱性真菌活性 检验方法和要求(第1阶段) |
Chemical disinfectants and antiseptics - Basic fungicidal activity - Test method and requirements (Phase 1) |
EN 12750-2001 |
木工机械的安全四边制模机械 |
Safety of woodworking machines - Four-sided moulding machines |
EN 12751-1999 |
纺织品试验用纤维、纱和织物的抽样 |
Textiles - Sampling of fibres, yarns and fabrics for testing |
EN 12752-1-1999 |
标称热输入不超过20kW的B型燃气滚动烘干机第1部分:安全 |
Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 1: Safety |
EN 12752-2-1999 |
标称热输入不超过20kW的B型滚动烘干机能量的合理利用 |
Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 2: Rational use of energy |
EN 12754-2001 |
可移动的气瓶溶解乙炔用气瓶灌装时的检查 |
Transportable gas cylinders - Cylinders for dissolved acetylene - Inspection at time of filling |
EN 12755-2000 |
可移动气瓶乙炔灌装条件 |
Transportable gas cylinders - Filling conditions for acetylene bundles |
EN 12756-2000 |
机械密封主要尺寸、标识和材料编码 |
Mechanical seals - Principal dimensions, designation and material codes |
EN 12758-2002 |
建筑玻璃装玻璃和隔声产品描述和性能的测定 |
Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
EN 12759-2001 |
涂橡胶或塑料涂织物耐液体性能 |
Rubber- or plastic-coated fabrics - Determination of resistance to liquids |
EN 1276-1997 |
化学消毒剂和防腐剂 用在食品、工业、家用、和公共区域的化学消毒剂和防腐剂的微生物活性评估的定量悬浮实 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (Phase2) |
EN 12760-1999 |
阀门 钢阀门套接焊接端 |
Valves - Socket welding ends for steel valves |
EN 12761-1-2001 |
农业和林业机械 喷雾器和液体肥料撒布机 环境保护 第1部分:总则 |
Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors; Environmental protection - Part 1: General |
EN 12761-2-2001 |
农业和林业机械 喷雾器和液态肥料撒布机 环境保护 第2部分:田间作物喷雾器 |
Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors; Environmental protection - Part 2: Field crop sprayers |
EN 12761-3-2001 |
农业和林业机械 喷雾器和液态肥料撒布机 环境保护 第3部分:灌木和乔木作物用空气助动式喷雾器 |
Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors; Environmental protection - Part 3: Air-assisted sprayers for bush and tree crops |
EN 12763-2000 |
建筑物排水系统的纤维胶合管及附件 交货尺寸和技术术语 |
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
EN 12765-2001 |
非建筑应用中热固性木胶的分类 |
Classification of thermosetting wood adhesives for non-structural applications |
EN 12766-1-2000 |
石油制品和废油 PCBs和相关产品的测定 第1部分:用电子俘获探测器(ECD)通过气相色谱分析(GC)法分离和 |
Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
EN 12766-2-2001 |
石油制品和废油 PCBs和相关产品的测定 第2部分:多氯化联二苯(PCB)含量计算 |
Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content |
EN 12766-3-2004 |
石油产品和用过的油.多氯联苯和相关产品的测定.第3部分:用电子俘获探测器的气相色谱法测定多氯三联苯(PCT)和多氯甲苯((PCBT)含量 |
|
EN 12767-2000 |
公路设备支承结构的被动安全 要求和试验方法 |
Passive safety of support structures for road equipment - Requirements and test methods |
EN 1277-1996 |
塑料管道系统 地下无压用热塑管道系统 弹性密封环型接头密封性试验方法 |
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
EN 12770-1999 |
鞋类 鞋底试验方法 耐磨性 |
Footwear - Test methods for outsoles - Abrasion resistance |
EN 12771-1999 |
鞋类 鞋底试验方法 撕裂强度 |
Footwear - Test methods for outsoles - Tear strength |
EN 12772-1999 |
鞋类 鞋底试验方法 尺寸稳定性 |
Footwear - Test methods for outsoles - Dimensional stability |
EN 12773-1999 |
鞋类 鞋底试验方法 针刺裂强度 |
Footwear - Test methods for outsoles - Needle tear strength |
EN 12774-1999 |
鞋类 鞋底试验方法 裂口撕裂强度和抗分层阻力的测定 |
Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance |
EN 12775-2001 |
实心木板 分类和术语 |
Solid wood panels - Classification and terminology |
EN 12778-2002 |
炊具 家用压力炊具 |
Cookware - Pressure cookers for domestic use |
EN 12779-2004 |
木材加工机械安全.带固定装置的碎片和灰尘排出系统.性能相关安全和安全要求 |
|
EN 12779-2004 |
木材加工机械安全.带固定装置的碎片和灰尘排出系统.性能相关安全和安全要求 |
|
EN 1278-1998 |
民用水处理用化学药剂 臭氧 |
Chemicals used for treatment of water intended for human consumption - Ozone |
EN 1278/prA1-2000 |
民用水处理用化学药剂 臭氧 修正A1 |
Chemicals used for treatment of water intended for human consumption - Ozone; Amendment A1 |
EN 12780-2002 |
水质 通过膜滤除法检测和统计假单胞铜绿菌 |
Water quality - Detection and enumeration of Pseudomonas aeruginosa by membrane filtration |
EN 12781-2001 |
墙面覆盖层 软木板规范 |
Wallcoverings - Specification for cork panels |
EN 12782-1999 |
鞋类 鞋垫试验方法 抗缝合撕裂阻力 |
Footwear - Test methods for insoles - Resistance to stitch tear |
EN 12784-1999 |
鞋类 整鞋试验方法 保温 |
Footwear - Test methods for whole shoe - Thermal insulation |
EN 12785-2000 |
鞋类 整鞋试验方法 鞋跟固定 |
Footwear - Test methods for whole shoe - Heel attachment |
EN 12786-1999 |
机械安全性 安全标准振动条款起草指南 |
Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards |
EN 12789-2002 |
高级工艺陶瓷 空气、大气压的空气中陶瓷合成物的高温机械性能 抗弯强度测定 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
EN 1279-1-2004 |
建筑玻璃.绝缘玻璃组件.第1部分:概论、尺寸公差和系统描述规则 |
|
EN 1279-2-2002 |
建筑玻璃 隔离玻璃装置 第2部分:透潮性长期试验方法和要求 |
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
EN 1279-3-2002 |
建筑玻璃 隔离玻璃装置 第3部分:漏气率和气体浓度容差的长期试验方法和要求 |
Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
EN 1279-4-2002 |
建筑玻璃 隔离玻璃装置 第4部分:边缘密封物理特性的试验方法 |
Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
EN 1279-6-2002 |
建筑玻璃 隔离玻璃装置 第6部分:工厂生产控制及周期试验 |
Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
EN 12790-2002 |
儿童看护用品 斜倚式摇篮 |
Child care articles - Reclined cradles |
EN 12792-2003 |
建筑物通风 符号、术语和图形符号 |
Ventilation for buildings - Symbols, terminology and graphical symbols |
EN 12795-2003 |
公路交通和运输通信和信息处理技术 专用近程通讯(DSRC) DSRC数据链路层 媒体访问和逻辑链路控制 |
Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC Data link layer: Medium access and logical link control |
EN 12797-2000 |
铜焊 铜焊接头的破坏性试验 |
Brazing - Destructive tests of brazed joints |
EN 12798-1999 |
运输质量体系 公路、铁路以及内河运输 有关危险品运输安全性的EN ISO 9002增补质量体系要求 |
Transport Quality System - Road, rail and inland navigation transport - Quality system requirements to supplement EN ISO 9002 for the transport of dangerous goods with regard to safety |
EN 12799-2000 |
铜焊 铜焊接头的破坏性试验 |
Brazing - Non-destructive examination of brazed joints |
EN 12800-2000 |
鞋类 鞋垫试验方法 尺寸稳定性 |
Footwear - Test methods for insoles - Dimensional stability |
EN 12801-2000 |
鞋类 鞋垫、衬里和衬垫试验方法 耐汗性 |
Footwear - Test methods for insoles, lining and insocks - Perspiration resistance |
EN 12802-2000 |
道路标志材料 实验室识别方法 |
Road marking materials - Laboratory methods for identification |
EN 12803-2000 |
鞋类 鞋底试验方法 抗拉强度和伸长率 |
Footwear - Test methods for outsoles - Tensile strength and elongation |
EN 12805-2002 |
机动车液化石油气(LPG)构件 容器 |
Automotive LPG components - Containers |
EN 12806-2003 |
机动车液化石油气(LPG)构件 罐以外的其它容器 |
Automative liquefied petroleum gas components - Other than containers |
EN 12807-2001 |
可移动再充式液化石油气(LPG)铜焊钢瓶 设计和构造 |
Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
EN 12808-1-1999 |
瓷砖用粘合剂和灰浆 第1部分:反应树脂砂浆耐化学腐蚀性测定 |
Adhesives and grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars |
EN 12808-2-2001 |
瓷砖用灰浆 第2部分:耐磨性测定 |
Grouts for tiles - Part 2: Determination of resistance to abrasion |
EN 12808-3-2001 |
瓷砖用灰浆 第3部分:抗弯和耐压强度测定 |
Grouts for tiles - Part 3: Determination of flexural and compressive strength |
EN 12808-4-2001 |
瓷砖用灰浆 第4部分:收缩性测定 |
Grouts for tiles - Part 4: Determination of shrinkage |
EN 12808-5-2001 |
瓷砖用灰浆 第5部分:吸水性测定 |
Grouts for tiles - Part 5: Determination of water absorption |
EN 1281-2-1995 |
麻醉和呼吸设备 圆锥形接头 第2部分:螺纹承重连接头 |
Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:1987 modified) |
EN 12811-2-2004 |
临时工作设备.第2部分:材料的信息 |
|
EN 12811-3-2002 |
临时性工程设备 脚手架 第3部分:负荷试验 |
Temporary works equipment - Part 3: Load testing |
EN 12812-2004 |
脚手架.性能要求和一般设计 |
|
EN 12813-2004 |
临时工程设备.预制构件的承载塔.结构设计的特殊要求 |
|
EN 12814-2-2000 |
热塑性塑料半成品的焊接接头试验 第2部分:拉伸试验 |
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test |
EN 12814-3-2000 |
热塑性塑料半成品的焊接接头试验 第3部分:拉伸蠕变试验 |
Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test |
EN 12814-4-2001 |
热塑性塑料半成品的焊接接头试验 第4部分:剥落试验 |
Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test |
EN 12814-5-2000 |
热塑性塑料半成品的焊接接头试验 第5部分:目测 |
Testing of welded joints of thermoplastics semi-finished - Part 5: Macroscopic examination |
EN 12814-6-2000 |
热塑性塑料半成品的焊接接头试验 第6部分:低温拉伸试验 |
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test |
EN 12814-7-2002 |
热塑性塑料半成品的焊接接头试验 第7部分:采用腰形试样的拉伸试验 |
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
EN 12815-2004 |
家用固体燃料炊具.要求和试验方法 |
|