标准号 |
中文名称 |
英文名称 |
prEN 10163-4-1991 |
热轧钢制品表面质量的交货条件第4部分:圆棒和线材 |
Delivery requirements for surface quality of hot rolled steel products-Part 4: Round bars and wire rod |
prEN 10168-2000 |
铁和钢检查文件信息及描述清单 |
Iron and steel - Inspection documents - List of information and description |
prEN 10184-2001 |
黑色金属材料的化学分析非合金钢和铁中磷的测定分光光度法 |
Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
prEN 10201-1988 |
黑色金属材料的化学分析钢铁中硅的测定火焰原子吸收光谱法 |
Chemical analysis of ferrous materials; determination of silicon in steel and iron; flame atomic absoption spectrometric method |
prEN 10204-2000 |
金属制品检查文件的类型 |
Metallic products - Types of inspection documents |
prEN 10208-3-1997 |
易燃流体管道用钢管交货技术条件第3部分:符合C类要求的管材 |
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 3: Pipes of requirement class C |
prEN 10216-5-1998 |
压力用途的无缝钢管交货技术条件第5部分:不锈钢管 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
prEN 10217-7-1998 |
压力用途的焊接钢管交货技术条件第7部分:不锈钢管 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
prEN 10222-6-1994 |
压力用途的钢锻件第6部分:奥氏体、马氏体和奥氏体-铁素体不锈钢 |
Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels |
prEN 10226-1-1995 |
螺纹式密封的管螺纹第1部分:名称、尺寸和公差 |
Pipe threads where pressure tight joints are made on the threads - Part 1: Designation, dimensions and tolerances |
prEN 10226-2-2002 |
螺纹式密封的管螺纹 第2部分:锥形内螺纹和锥形外螺纹 名称、公差和尺寸 |
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads; Dimensions, tolerances and designation |
prEN 1025-1993 |
欧洲IT质量系统审核指南 |
European IT quality system auditor guide |
prEN 10253-2-1999 |
对缝焊管配件第2部分:具有特殊检验要求的锻制碳和铁素体合金钢 |
Butt welding pipe fittings - Part 2: Wrought carbon and ferritic alloy steel with specific inspection requirements |
prEN 10255-2002 |
适用于焊接和加工螺纹的非合金钢管交货技术条件 |
Non-alloy steel tubes suitable for welding or threading - Technical delivery conditions |
prEN 10285-1996 |
岸上和海上管路用钢管及配件外部三层喷涂聚乙烯底化 |
Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coatings |
prEN 10286-1996 |
岸上和海上管路用钢管及配件外表三层喷涂聚丙烯底化 |
Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings |
prEN 10287-1996 |
岸上和海上管路用钢管及配件外表熔化聚乙烯底化 |
Steel tubes and fittings for on and offshore pipelines - External fused polyethylene based coatings |
prEN 1029-1993 |
装配式铁素产品的热浸电镀层 规范 |
Hot dip galvanized coatings on fabricated ferrous products; specification |
prEN 10293-1-1998 |
建筑和一般工程用途钢铸件第1部分:总则 |
Steel castings for structural and general engineering uses - Part 1: General |
prEN 10293-2-1998 |
建筑和一般工程用途钢铸件第2部分:建筑用途钢铸件 |
Steel castings for structural and general engineering uses - Part 2: Steel casting for structural uses |
prEN 10293-2002 |
一般工程用途钢铸件 |
Steel castings for general engineering uses |
prEN 10293-3-1998 |
建筑和一般工程用途钢铸件第3部分:一般工程用途钢铸件 |
Steel castings for structural and general engineering uses - Part 3: Steel casting for general engineering uses |
prEN 10294-1-1998 |
加工用空心棒材交货技术条件第1部分:非合金钢和合金钢 |
Hollow bars for machining - Technical delivery conditions - Part 1: Non-alloy and alloy steels |
prEN 10296-2-2001 |
机械和一般工程用途的焊接钢管交货技术条件第2部分:不锈钢管 |
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes |
prEN 10297-2-2001 |
机械和一般工程用途的无缝环行钢管交货技术条件第2部分:不锈钢管 |
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes |
prEN 10298-2002 |
岸上和海上管路钢管及配件水泥沙浆内衬 |
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar |
prEN 10300-2002 |
岸上和海上管路钢管及配件外表涂层用沥青加热材料 |
Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
prEN 10305-6-1999 |
高精密度用途的钢管交货技术条件第6部分:液压和气动系统用冷拔焊接钢管 |
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
prEN 10309-1999 |
岸上和海上管路钢管及配件外表环氧树脂粉末涂层 |
Steel tubes and fittings for onshore and offshore pipelines - External epoxy powder coating |
prEN 10310-2002 |
岸上和海上管路钢管及配件双层环氧树脂和聚酰胺基涂层的内衬和外衬 |
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
prEN 10311-1999 |
传送人类消耗的含水液体(包括水)的钢管和接头间的连接件 |
Joints for the connection of steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption |
prEN 10315-1999 |
采用“逼近技术”法用X射线荧光光谱仪分析高合金钢的常规方法 |
Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique method |
prEN 10318-2000 |
锌基和铝基金属镀层厚度和化学成分的测定常规方法 |
Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
prEN 10323-2001 |
钢丝和钢丝制品钢丝圈 |
Steel wire and wire products - Bead wire |
prEN 10324-2001 |
钢丝和钢丝制品软管增强用钢丝 |
Steel wire and wire products - Hose reinforcement wire |
prEN 10325-2002 |
钢热处理效应增加屈服强度的测定(Bake淬火指数) |
Steel - Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index) |
prEN 10326-2002 |
连续热浸镀结构钢带和薄钢带交货技术条件 |
Continuously hot-dip coated structural steels strip and sheet - Technical delivery conditions |
prEN 10327-2002 |
冷成形用连续热浸镀冷扎低碳钢带和薄钢带交货技术条件 |
Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
prEN 10328-2002 |
表面加热后有效硬化层深度的测定 |
Determination of the effective depth of hardening after surface heating |
prEN 10329-2002 |
岸上和海上管路钢管及配件外表安装接头涂层 |
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
prEN 1042-1995 |
塑料管道系统 聚烯烃管和/或配件间的熔接连接件 恒温下内部压力抵抗力的测定 |
Plastics piping systems - Fusion joints between polyolefin pipes and/or fittings - Determination of resistance to internal pressure at constant temperature |
prEN 1052-5-2002 |
圬工用试验方法 第5部分:用粘结扭转法测定粘结强度 |
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
prEN 1062-2-1996 |
涂料和清漆 外部圬工和混凝土用覆层材料和涂覆系统 第2部分:水蒸汽传输率(渗透性)的测定和分类 |
Paints and varnishes - Coating materials and coating systems for exterior masonry - Part 2: Determination and classification of water-vapour transmission rate (permeability) |
prEN 1071-3-2000 |
先进技术陶瓷 陶瓷涂层用试验方法 第3部分:用刮痕试验测定胶合力和其它机械故障 |
Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test |
prEN 1073-1995 |
防放射性污染的防护服装 要求和测试 |
Protective clothing against radioactive contamination - Requirements and testing |
prEN 1074-6-2003 |
供水阀门 目的要求的适应性和合适的认证试验 第6部分:消防栓 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
prEN 1079-1993 |
滑板及旱冰鞋使用者用防护帽 |
Helmets for users of skateboards and roller skates |
prEN 109-1986 |
载人和载材料的建筑物升降机的建造和安装的安全规则(I类) |
Safety rules for the construction and installation of building hoists for passengers and materials (category I) |
prEN 1096-4-2001 |
建筑物玻璃 涂层玻璃 第4部分:一致性评定 |
Glass in building - Coated glass - Part 4: Evaluation of conformity |
prEN 110-1977 |
建筑物升降机的建造和安装的安全规则(III类) |
Safety rules for construction and installation of building hoists; category III |
prEN 1105-1-1994 |
识别卡系统 应用于内部环境使用IC卡系统的术语 第1部分:注册程序 |
Identification cards; terminology applying to systems using integrated circuit(s) card in intersector environment; part 1: registration procedures |
prEN 1105-1995 |
识别卡系统 应用于内部环境使用IC卡系统的一般概念 内部应用一致性准则 |
Identification card systems - General concepts applying to systems using IC cards in inter-sector environments - Rules for inter-application consistency |
prEN 11070-1998 |
一次性使用无菌血管内导管导入器 |
Sterile single-use intravascular catheter introducers |
prEN 1115-2-1997 |
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料(GRP) 第2部分:具挠 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
prEN 1115-4-1993 |
压力下地下排水和排污装置用塑料管道系统 基于聚脂树脂的玻璃增强热固性塑料(GRP) 第4部分:辅助设备 |
Plastics piping systems for underground drainage and sewerage under pressure; glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP); part 4 (informative): ancillary equipment |
prEN 1115-6-1997 |
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料(GRP) 第6部分:安装 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 6: Practices for installation |
prEN 1115-7-1995 |
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料(GRP) 第7部分:一致 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 7: Assessment of conformity |
prEN 1126-2-1993 |
建筑构件 出口装置 第2部分:搬把式门拉手或按垫操作的紧急装置 规范和试验方法 |
Building hardware; exit devices; part 2: emergency devices operated by a lever handle or push pad; specifications and test methods |
prEN 1144-1994 |
热果脯 定义、要求和命名 |
Heat preserved fruit - Definitions, requirements and denominations |
prEN 1145-1993 |
罐装蔬菜 规范 名称 |
Canned vegetables; specifications; designations |
prEN 1146-2002 |
自救呼吸保护装置 带面具的自带开放线路压缩空气呼吸装置(带面具的压缩空气逃生装置) 要求、测试和标志 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape (compressed air escape apparatus with hood) - Requirements, testing, marking |
prEN 1149-1993 |
防护服 静电性能 |
Protective clothing; electrostatic properties |
prEN 1149-3-2001 |
防护服 静电性能 第3部分:电荷衰减测量的试验方法 |
Protective clothing - Electrostatic properties - Part 3: Test method for measurement of charge decay |
prEN 1157-1993 |
焊接 工作位置 倾斜角和旋转角定义 |
Welds; working positions; definitions of angles of slope and rotation |
prEN 116100-1991 |
分规范机电有或无继电器 |
Sectional specification; electromechanical all-or-nothing relays |
prEN 116101-1991 |
空白详细规范机电有或无继电器 |
Blank detail specification; electromechanical all-or-nothing relays |
prEN 1166-1993 |
羽毛和绒毛 试验方法 空调和测试的标准大气 |
Feather and down; standard atmosphere for conditioning and testing |
prEN 1168-1993 |
地基或预制预应力空心素 |
Floor or precast prestressed hollow core elements |
prEN 1168-2-1999 |
预制混凝土制品 楼板用空心板 第2部分:加强板 |
Precast concrete products - Hollow core slabs for floors - Part 2: Reinforced slabs |
prEN 1176-8-1993 |
运动场设备 第8部分:安装、检验、维护 |
Playground equipment; part 8: installation, inspection and maintenance |
prEN 1176-9-1993 |
运动场设备 第9部分:操作 |
Playground equipment; part 9: operation |
prEN 1178-1-2000 |
家具 家用儿童高椅 第1部分:安全要求 |
Furniture - High chairs for domestic use - Part 1: Safety requirements |
prEN 1178-2-2000 |
家具 家用儿童高椅 第2部分:试验方法 |
Furniture - High chairs for domestic use - Part 2: Test methods |
prEN 1188-6-1993 |
承载部件的抗火试验 第6部分:立柱抗火试验方法 |
Fire resistance tests on load bearing elements; part 6: method of test for fire resistance of columns |
prEN 1190-1993 |
建筑物的热性能 与地面的热交换 计算方法 |
Thermal performance of buildings; heat exchange with the ground; calculation method |
prEN 12001-2002 |
用于混凝土和砂浆输送、喷射和布料的机械安全要求 |
Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
prEN 120012-1991 |
空白详细规范能提供防电击保护的带有光电晶体管输出的光耦合器 |
Blank detail specification; optocoupler with phototransistor output, providing protection against electrical shock |
prEN 120013-1992 |
空白详细规范PINFET组件(用于光纤) |
Blank detail specification; PINFET-module (for fibre optic applications) |
prEN 120014-1992 |
空白详细规范同轴接收激光器 |
Blank detail specification; coaxial receptable laser |
prEN 120016-1991 |
空白详细规范矩阵液晶显示器组件 |
Blank detail specification; matrix liquid crystal display; modules |
prEN 120017-1992 |
标准号: |
中文标题: |
prEN 12008-1-1995 |
对16巴以下(包括16巴)供气系统材料、设计、构造、操作、维修和更新的特殊功能要求第1部分:10巴以下( |
Specific functional requirements for the materials, design, construction, operation, maintenance and renovation of gas supply systems up to and including 16 bar - Part 1: Polyethylene systems up to and including 10 bar |
prEN 12008-2-1995 |
对16巴以下(包括16巴)供气系统的材料、设计、构造、操作、维修和更新的特殊功能要求第2部分:16巴以下 |
Specific functional requirements for the materials, design, construction, operation, maintenance and renovation of gas supply systems up to and including 16 bar - Part 2: Steel-systems up to and including 16 bar MOP |
prEN 12008-3-1996 |
对16巴以下(包括16巴)供气系统的材料、设计、构造、操作、维修和更新的特殊功能要求第3部分:更新 |
Functional requirements for the materials, design, construction, operation, maintenance and renovation of gas supply systems up to and including 16 bar - Part 3: Renovation |
prEN 12015-2001 |
电磁兼容性电梯、自动扶梯和载客输送机的产品族标准发射 |
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission |
prEN 12016-2003 |
电磁兼容性电梯、自动扶梯和载客输送机的产品系列标准抗扰性 |
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity / Note: Intended as replacement for EN 12016 (1998-05). |
prEN 12042-2000 |
食品加工机械对自动分配机的安全及卫生要求 |
Food processing machinery - Automatic dividers - Safety and hygiene requirements |
prEN 12044-1998 |
鞋类、皮革及仿皮革制品制造机械切割及冲压机械安全要求 |
Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
prEN 12054-2001 |
化学消毒剂和防腐剂卫生和外科用擦手和洗手用品的杀菌效果评价用定量悬浮液试验试验方法和要求(第二阶 |
Chemical desinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of products for hygienic and surgical handrub and handwash used in human medicine - Test method and requirements (phase 2/step 1) |
prEN 12056-6-1995 |
建筑物内的重力排水系统第6部分:检验与测试 |
Gravity drainage systems inside buildings - Part 6: Inspection and testing |
prEN 12064-1996 |
木板包装用实心和波纹纤维板规范 |
Board - Specification of solid and corrugated fibreboard for packaging purposes |
prEN 12067-2-2001 |
燃气喷嘴和燃气装置用燃气/空气混合调节器第2部分:电子型 |
Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
prEN 12076-1995 |
压缩机和真空汞的噪声发射的测量(工程法) |
Measurement of noise emission from compressors and vacuum pumps (engineering method) |
prEN 1209-2003 |
人类用水处理使用的化学制品 硅酸钠 |
Chemicals used for treatment of water intended for human consumption - Sodium silicate / Note: Intended as replacement for EN 1209 (1997-09). |
prEN 12093-1-1995 |
纸浆赃物和杂质的估计第1部分:造纸用纸浆 |
Pulp - Estimation of dirt and shives - Part 1: Pulp manufactured in sheets |
prEN 12094-4-2001 |
固定式消防系统气体灭火系统的部件第4部分:对高压容器阀组件及其驱动器的要求及试验方法 |
Fixed fire fighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for high pressure container valve assemblies and their actuators |
prEN 12101-1-2003 |
烟和热控制系统 第1部分:烟幕的规范 |
Smoke and heat control systems - Part 1: Specification for smoke barriers |
prEN 12101-4-2003 |
烟和热控制系统第4部分:火和烟雾控制装置工具 |
Smoke and heat control systems - Part 4: Fire and smoke control installations; Kits |
prEN 12101-6-2001 |
烟和热控制系统第6部分:压差系统工具 |
Smoke and heat control systems - Part 6: Pressure differential systems; Kits |
prEN 12116-1995 |
工业阀门部分回流阀驱动附件 |
Industrial valves - Part-turn valve actuator attachment |
prEN 1214-1993 |
铁路用自动车辆识别 |
Automatic vehicle identification for railways |
prEN 12150-2-2001 |
建筑玻璃热韧化碱石灰硅酸盐安全玻璃第2部分:合格评定 |
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity |
prEN 12151-1995 |
混凝土和灰浆拌制机械与设备安全要求 |
Machinery and plant for the preparation of concrete and mortar - Safety requirements |
prEN 12178-2003 |
制冷系统和热泵液面指示装置的要求、试验和标志 |
Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
prEN 1218-2-1997 |
木工机械的安全 制榫机 第2部分:链条进料的双端制榫机和/或仿型机 |
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
prEN 1218-4-1997 |
木工机械的安全 制榫机 第4部分:链条进料的边缘封边机 |
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
prEN 1218-5-1998 |
木工机械的安全 制榫机 第5部分:带固定工作台和进料辊或链条进料的单边仿型机 |
Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed by chain |
prEN 1219-1993 |
卫生用具 抗瓷釉表面磨损的测定 |
Sanitary appliances; determination of the resistance of enamelled (glazed) surfaces to abrasion |
prEN 12195-1-2003 |
道路车辆的货物约束装置安全第1部分:捆绑力的计算 |
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of lashing forces |
prEN 12195-4-2003 |
道路车辆的货物约束装置安全第4部分:捆绑钢丝绳 |
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
prEN 1220-1993 |
塑料材料的卫生用具 冲击性试验 |
Sanitary appliances of plastic materials; impact test |
prEN 122000-1993 |
通用规范:无线电频率同轴连接器(第I、II、III部分) |
Generic specification: radio frequency coaxial connectors (parts I, II and III) (CECC 22000:1992) |
prEN 12206-1-2001 |
色漆和清漆建筑用途的铝和铝合金涂层第1部分:由粉末涂料的配制涂层 |
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from powder coating materials |
prEN 12209-2003 |
建筑五金件锁和插销机械加工锁、插销和锁板要求和试验方法 |
Building hardware - Locks and latches; Mechanically operated locks, latches and locking plates - Requirements and test methods |
prEN 12209-3-1998 |
建筑五金件锁和插销第3部分:电动加工锁和插销要求和试验方法 |
Building hardware - Locks and latches - Part 3: Electromechanically operated locks and striking plates - Requirements and test methods |
prEN 1221-1993 |
卫生用具 抗香烟燃烧性的测定 |
Sanitary appliances; determination of the resistance to cigarette burns |
prEN 12214-1995 |
低温容器各种设备和附件的要求 |
Cryogenic vessels - Requirements for miscellaneous equipment and accessories |
prEN 12215-1995 |
涂覆设备有机液体涂料的喷雾室应用安全要求 |
Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
prEN 122151-1992 |
空白详细规范:射频同轴连接器EIA法兰系列 |
Blank detail specification: Radio frequency coaxial connectors-series EIA flange (CECC 22151:1986) |
prEN 12217-2003 |
门开启力分级 |
Doors - Operating forces - Requirements and classification |