标准号 |
中文名称 |
英文名称 |
EN ISO 4541-1994 |
金属和其他无机覆盖层腐蚀膏腐蚀试验(CORR试验) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978) |
EN ISO 4543-1994 |
金属和其他无机覆盖层储存条件下腐蚀试验的一般规则 |
Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions (ISO 4543:1981) |
EN ISO 4577-1999 |
塑料聚丙烯和聚丙烯共聚物空气中氧化稳定性的测定烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:1983) |
EN ISO 4583-1998 |
塑料环氧树脂和有关材料易皂化氯的测定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998) |
EN ISO 4589-1-1999 |
塑料通过氧指数测定其燃烧性第1部分:指南 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996) |
EN ISO 4589-2-1999 |
塑料通过氧指数测定其燃烧性第2部分:室温试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996) |
EN ISO 4589-3-1996 |
塑料通过氧指数测定其燃烧性第3部分:高温试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996) |
EN ISO 4590-2003 |
硬质泡沫塑料材料开孔及闭孔体积百分数的测定 |
Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002) |
EN ISO 4597-1-1997 |
塑料环氧树脂用固化剂和促进剂第1部分:命名 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983) |
EN ISO 4599-1996 |
塑料耐环境应力龟裂的测定变形片法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986) |
EN ISO 4600-1997 |
塑料耐环境应力龟裂的测定球或针压痕法 |
Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method (ISO 4600:1992) |
EN ISO 4608-1998 |
塑料氯乙烯一般用途氯乙烯均聚物和共聚物树脂室温下增塑剂吸收的测定 |
Plastics - Vinylchlorid(VC)-homopolymere and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998) |
EN ISO 4610-2001 |
塑料氯乙烯均聚物和共聚物树脂用空气喷射筛滤器进行筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001) |
EN ISO 4611-1999 |
塑料湿热水溅和盐雾效应的测定 |
Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987) |
EN ISO 4612-1999 |
塑料试验用聚氯乙烯糊料的制备齿轮传动混合方法 |
Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:1999) |
EN ISO 4613-1-1999 |
塑料乙酸乙烯/乙烯酯模塑和挤塑材料第1部分:命名和规范 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993) |
EN ISO 4613-2-1995 |
塑料乙酸乙烯/乙烯酯模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995) |
EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
EN ISO 4613-2/prA1-2001 |
塑料乙酸乙烯/乙烯酯模塑和挤塑材料第2部分:试样的制备和性能的测定修改1 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment A1 (ISO 4613-2:1995/DAM 1:2001) |
EN ISO 4614-1999 |
塑料三聚氰胺-甲醛模塑件可萃取的甲醛的测定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977) |
EN ISO 4615-1999 |
塑料不饱和聚酯和环氧树脂总氯量的测定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979) |
EN ISO 4617-2000 |
色漆和清漆系列等效术语表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000) |
EN ISO 4618-2-1999 |
色漆和清漆涂覆材料的术语和定义第2部分:与涂料特性有关的特殊术语 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999) |
EN ISO 4618-3-1999 |
色漆和清漆涂覆材料的术语和定义第3部分:表面制备和应用方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999) |
EN ISO 4622-1994 |
色漆和清漆堆积压力试验 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992) |
EN ISO 4623-1-2002 |
色漆和清漆耐丝状腐蚀的测定第1部分:钢基质 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
EN ISO 4623-2-2004 |
涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底 |
|
EN ISO 4624-2003 |
色漆和清漆 粘附性的 撕开试验 |
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002) |
EN ISO 4628-1-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第1部分:一般介绍和命名系统 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003) |
EN ISO 4628-10-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第10部分:线状腐蚀度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree filiform corrosion (ISO 4628-10:2003) |
EN ISO 4628-2-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第2部分:起泡度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003) |
EN ISO 4628-3-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第3部分:防生锈度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003) |
EN ISO 4628-4-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第4部分:破裂度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003) |
EN ISO 4628-5-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第5部分:剥落度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003) |
EN ISO 4628-6-2001 |
色漆和清漆漆膜降解的评定一般性缺陷程度、量值和大小的规定第6部分:粉化等级评定用胶带方法 |
Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990) |
EN ISO 4628-7-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第7部分:用绒化法做粉化程 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003) |
EN ISO 4629-1998 |
色漆和清漆用粘合剂羟值的测定滴定法 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
EN ISO 4638-1995 |
软质泡沫聚合材料气流透过率的测定 |
Polymeric materials, cellular flexible - Determination of air flow permeability (ISO 4638:1984) |
EN ISO 4651-1995 |
泡沫橡胶和塑料动态缓冲性能测定 |
Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988) |
EN ISO 4671-2000 |
橡胶和塑料软管和软管组件尺寸测量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999) |
EN ISO 4672-1999 |
橡胶和塑料软管低温的弯曲试验 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997) |
EN ISO 4674-1-2003 |
涂橡胶-或塑料的织物 抗撕裂力的测定 第1部分: 撕裂方法的 恒定速度 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2003) |
EN ISO 4674-2-1998 |
橡胶或塑料涂覆织物抗撕裂性测定第2部分:冲击摆法 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998) |
EN ISO 472-2001 |
塑料 词汇 |
Plastics - Vocabulary (ISO 472:1999) |
EN ISO 4753-1999 |
紧固件ISO米制外螺纹零件的末端 |
Fasteners - Ends of parts with external ISO metric screw thread (ISO 4753:1999) |
EN ISO 4757-1994 |
螺钉用十字槽 |
Cross recesses for screws (ISO 4757:1983) |
EN ISO 4759-1-2000 |
紧固件公差第1部分:螺栓、螺钉、螺柱和螺母产品等级A、B和C级 |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; product grades A, B and C (ISO 4759-1:2000) |
EN ISO 4759-3-2000 |
紧固件公差第3部分:螺栓、螺钉和螺母用平垫圈产品等级A和C级 |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C (ISO 4759-3:2000) |
EN ISO 4762-1997 |
内六角圆柱头螺钉 |
Hexagon socket head cap screws (ISO 4762:1997) |
EN ISO 4762-2004 |
内六角圆柱头螺钉 |
|
EN ISO 4796-1-2000 |
实验室玻璃器皿瓶第1部分:螺纹口瓶 |
Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2000) |
EN ISO 4796-2-2000 |
实验室玻璃器皿瓶第2部分:锥型口瓶 |
Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000) |
EN ISO 4796-3-2000 |
实验室玻璃器皿瓶第3部分:吸气瓶 |
Laboratory glassware - Bottles - Part 3: Aspirator bottles (ISO 4796-3:2000) |
EN ISO 4823-2000 |
牙科学弹性体印模材料 |
Dentistry - Elastomeric impression materials (ISO 4823:2000) |
EN ISO 483-1999 |
塑料水溶液在小密封器中恒定相对湿度值法 |
Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value (ISO 483:1988) |
EN ISO 4833-2003 |
食物与动物饲料的微生物学微生物计数的一般方法在摄氏30度时的菌落计数技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 degrees C (ISO 4883:2003) |
EN ISO 4869-2-1995 |
声学护听器第2部分:佩带护听器时有效A-计权声压级的估算 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
EN ISO 4869-4-2000 |
声学护听器第4部分:与电平有关声音恢复耳罩的有效声压级的测量 |
Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998) |
EN ISO 4871-1996 |
声学机器和设备噪声辐射值的确定和检测 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN ISO 489-1999 |
塑料反射指数的测定 |
Plastics - Determination of refractive index (ISO 489:1999) |
EN ISO 4892-1-2000 |
塑料实验室光源暴露方法第1部分:通用指南 |
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999) |
EN ISO 4892-2-1999 |
塑料实验室光源暴露方法第2部分:氙弧灯 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994) |
EN ISO 4892-3-1999 |
塑料实验室光源暴露方法第3部分:UV荧光灯 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:1994) |
EN ISO 4894-1-1999 |
塑料苯乙烯/丙烯腈(SAN)模塑和挤塑材料第1部分:命名体系和基本规范 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997) |
EN ISO 4894-2-1999 |
塑料苯乙烯/丙烯腈(SAN)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995) |
EN ISO 4895-1999 |
塑料液态环氧树脂结晶性的测定 |
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997) |
EN ISO 4921-2001 |
针织品基本概念词汇 |
Knitting - Basic concepts - Vocabulary (ISO 4921:2000) |
EN ISO 4957-1999 |
工具钢 |
Tool steels (ISO 4957:1999) |
EN ISO 505-1999 |
传送带织物输送带抗撕裂强度的测定方法 |
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999) |
EN ISO 5079-1995 |
纺织纤维单纤维断裂强力和伸长率的测定 |
Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979) |
EN ISO 5080-1999 |
剑麻农业用细绳 |
Sisal agricultural twines (ISO 5080:1994) |
EN ISO 5084-1996 |
纺织品纺织品和纺织制品厚度的测定 |
Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996) |
EN ISO 5135-1998 |
声学在混响室中测定空调终端设备、空调终端单、阻尼器和调节阀门的噪声功率级 |
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
EN ISO 5136-2003 |
声学 风机或其他空气移动装置辐射入管道中的声功率的测定 管道法 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
EN ISO 5155-1995 |
家用制冷设备冷冻食品储藏柜和食品冷冻器特性和试验方法 |
Household refrigerating appliances - Frozen food storage cabinets and food freezers - Characteristics and test methods (ISO 5155:1995) |
EN ISO 5165-1998 |
石油产品柴油着火性能的测定十六烷值法 |
Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998) |
EN ISO 5167-1-2003 |
用压差装置测量流体流量第1部分:圆截面管道中插入的节流孔板、喷嘴和文杜利管 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
EN ISO 5167-2-2003 |
圆截面管道中用压差装置测量流体流量第2部分:锐孔法 |
Measurement of fluid flow by means of pressure differential devices in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) |
EN ISO 5167-3-2003 |
圆截面管道中用压差装置测量流体流量第3部分:喷嘴和文杜利喷嘴 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
EN ISO 5167-4-2003 |
圆截面管道中用压差装置测量流体流量第4部分:文杜利管 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) |
EN ISO 5172-1996 |
焊接、切割及加热用手工焊炬规范和试验 |
Manual blowpipes for welding, cutting and heating - Specifications and tests (ISO 5172:1995, including Amendment 1:1995) |
EN ISO 5183-1-2000 |
电阻焊设备外锥度1:10电极接头第1部分:锥度1:10圆锥形接头 |
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998) |
EN ISO 5183-2-2001 |
电阻点焊设备外锥度1:10电极接头第2部分:端推力电极用平行柄接头 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000) |
EN ISO 5198-1998 |
离心泵、混流泵和轴流泵液压性能试验规范精密级 |
Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987) |
EN ISO 5199-2002 |
离心泵技术条件Ⅱ类 |
Technical specifications for centrifugal pumps - Class II (ISO 5199:2002) |
EN ISO 5210-1996 |
通用阀门多回转阀门驱动装置的连接 |
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991) |
EN ISO 5211-2001 |
通用阀门转动零件的激励附件 |
Industrial valves - Part-turn actuator attachments (ISO 5211:2001) |
EN ISO 5261-1999 |
技术制图金属棒的简单表示和外形剖面 |
Technical drawings - Simplified representation of bars and profile sections (ISO 5261:1995) |
EN ISO 5263-1-2004 |
纸浆.实验室湿法分解.第1部分:化学纸浆的分解 |
|
EN ISO 5263-1997 |
纸浆实验室湿解离 |
Pulps - Laboratory wet disintegration (ISO 5263:1995) |
EN ISO 5263-2-2004 |
纸浆.实验室湿法分解.第2部分:20 鳦时机械纸浆的分解 |
|
EN ISO 5263-3-2004 |
纸浆.实验室湿法分解.第3部分:85 鳦时机械纸浆的分解 |
|
EN ISO 5264-2-2002 |
纸浆 实验室打浆 第2部分:PFI磨法 |
Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2002) |
EN ISO 5267-1-2000 |
纸浆滤水性的测定第1部分:朔珀-瑞格勒法 |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999) |
EN ISO 5269-1-2000 |
纸浆物理试验用实验室浆片的制备第1部分:常规纸页的成型法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:1998) |
EN ISO 5269-2-2000 |
纸浆物理试验用实验室浆片的制备第2部分:快速凯塞(Korhen)法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Korhen method (ISO 5269-2:1998) |
EN ISO 527-1-1996 |
塑料拉伸性能的测定第1部分:一般原则 |
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994) |
EN ISO 527-2-1996 |
塑料拉伸性能的测定第2部分:模压和挤压塑料试验条件 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994) |
EN ISO 527-4-1997 |
塑料拉伸性能的测定第4部分:各向同性及各向异性纤维增强塑料复合材料试验条件 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997) |
EN ISO 527-5-1997 |
塑料拉伸性能的测定第5部分:单向纤维增强塑料复合材料试验条件 |
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997) |
EN ISO 5270-1999 |
纸浆实验室纸页物理性能的测定 |
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:1998) |
EN ISO 5349-1-2001 |
机械振动人体手传振动的测量与评估第1部分:一般要求 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
EN ISO 5349-2-2001 |
机械振动人体手传振动的测量与评估第2部分:在车间测量的实用指南 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001) |
EN ISO 5350-1-1998 |
纸浆尘埃和纤维束的估算第1部分:实验室纸张检验 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets (ISO 5350-1:1998) |
EN ISO 5350-2-1998 |
纸浆尘埃和纤维束的估算第2部分:磨木浆片检验 |
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp (ISO 5350-2:1998) |
EN ISO 5353-1998 |
土方机械、农林用拖拉机和机械座椅标定点 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
EN ISO 5356-1-2004 |
麻醉和呼吸设备.圆锥形接头.第1部分:锥体和锥套 |
|
EN ISO 536-1996 |
纸和纸板定量的测定 |
Paper and board - Determination of grammage (ISO 536:1995) |
EN ISO 5366-1-2004 |
麻醉和呼吸设备.气管造口插管.第1部分:成人用插管和接头 |
|
EN ISO 5377-1994 |
水解淀粉产品还原能力和葡萄塘当量的测定莱恩和埃诺常量滴定法 |
Starch hydrolysis products - Determination of reducing power and dextrose equivalent - Lane and Eynon constant titre method (ISO 5377:1981) |
EN ISO 5378-1994 |
淀粉和淀粉制品用凯氏法测定氮的含量分光度法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Spectrophotometric method (ISO 5378:1978) |
EN ISO 5381-1994 |
水解淀粉产品水含量的测定改进的卡尔.费休法 |
Starch hydrolysis products - Determination of water content - Modified Karl Fischer method (ISO 5381:1983) |
EN ISO 5399-1998 |
皮革水溶性镁盐的测定乙二胺四乙酸滴定法 |
Leather - Determination of water-soluble magnesium salts - EDTA titrimetric method (ISO 5399:1984) |
EN ISO 5402-2002 |
皮革物理与机械试验用挠度法测定伸缩阻力 |
Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method (ISO 5402:2002) |
EN ISO 5403-2002 |
皮革物理与机械试验柔软皮革抗水性的测定 |
Leather - Physical and mechanical tests - Determination of water resistance of flexible leathers (ISO 5403:2002) |
EN ISO 5404-2002 |
皮革物理与机械试验厚皮革抗水性的测定 |
Leather - Physical and mechanical tests - Determination of water resistance of heavy leathers (ISO 5404:2002) |
EN ISO 542-1995 |
油籽取样 |
Oilseeds - Sampling (ISO 542:1990) |
EN ISO 5436-1-2000 |
产品几何量技术规范(GPS)表面结构:轮廓法测量标准第1部分:材料测量 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
EN ISO 5436-2-2001 |
产品几何量技术规范(GPS)表面结构:轮廓法测量标准第2部分:软件测量标准 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001) |
EN ISO 5455-1994 |
技术制图比例尺 |
Technical drawings - Scales (ISO 5455:1979) |