标准号 |
中文名称 |
英文名称 |
| EN 14035-29-2004 |
焰火.第29部分:蛇型烟花.规范和试验方法 |
|
| EN 14035-3-2004 |
焰火.第3部分:悬空轮.规范和试验方法 |
|
| EN 14035-34-2003 |
烟花第34部分：盘式烟花弹规范和试验方法 |
Fireworks - Part 34: Table bombs; Specification and test methods |
| EN 14035-35-2004 |
焰火.第35部分:摔炮.规范和试验方法 |
|
| EN 14035-36-2004 |
焰火.第36部分:轮型.规范和试验方法 |
|
| EN 14035-4-2003 |
烟花第4部分：爆竹和爆竹串规范和试验方法 |
Fireworks - Part 4: Bangers and banger batteries; Specification and test methods |
| EN 14035-6-2004 |
焰火.第6部分:信号火焰.规范和试验方法 |
|
| EN 14035-7-2004 |
焰火.第7部分:信号火柴.规范和试验方法 |
|
| EN 14035-8-2004 |
焰火.第8部分:信号棒.规范和试验方法 |
|
| EN 14035-9-2004 |
焰火.第9部分:爆裂颗粒.规范和试验方法 |
|
| EN 14036-2003 |
婴儿用护理品婴儿蹦床安全要求和试验方法 |
Child use and care articles - Baby bouncers - Safety requirements and test methods |
| EN 14037-1-2003 |
装有用低于120度温水供暖辐射板的天花板第1部分：技术规范和要求 |
Ceiling mounted radiant panels supplied with water at temperature below 120℃ - Part 1: Technical specifications and requirements |
| EN 14037-2-2003 |
装有用低于120度温水供暖辐射板的天花板 第2部分：散热率检验方法 |
Ceiling mounted radiant panels supplied with water at temperature below 120℃ - Part 2: Test method for thermal output |
| EN 14037-3-2003 |
装有低于120℃温水的发热板的天花板第3部分：热辐射输出功率的额定法和评估 |
Ceiling mounted radiant panels supplied with water at temperature below 120℃ - Part 3: Rating methods and evaluation of radiant thermal output |
| EN 14039-2004 |
废弃物表征.用气相色谱法测定C10至C40范围内的烃含量 |
|
| EN 140401-2002 |
空白详细规范：低功率非线绕表面安装固定电阻器 |
Blank detail specification: Fixed low power non wire-wound surface mount (SMD) resistors |
| EN 140401-802-2002 |
详细规范：低功率非线绕表面安装固定电阻器矩形稳定级12 |
Detail specification: Fixed low power non wire-wound surface mounting (SMD) resistors; Rectangular; Stability classes 1; 2 / Note: To be amended by EN 140401-802/prA1 (2003-05), EN 140401-802/prAA (2003-05). |
| EN 140401-802-2004 |
详细规范:低功率非线绕表面安装的固定电阻器.矩形.稳定性级别1和2 |
|
| EN 140401-803-2002 |
详细规范：低功率非线绕表面安装固定电阻器矩形稳定级0.050.10.250.512 |
Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors; Cylindrical; Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 |
| EN 140402-1998 |
空白详细规范：低功率线绕表面安装固定电阻器 |
Blank detail specification: Fixed low power wire wound surface mounting (SMD) resistors |
| EN 14041-2004 |
弹性、纺织和层压地板覆盖物.基本特性 |
|
| EN 14042-2003 |
工作场所空气暴露于化学和生物制剂的评定程序应用及使用指南 |
Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| EN 14045-2003 |
包装在特定堆放条件下包装材料定向试验中的分解的评定 |
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
| EN 14046-2003 |
包装在可控堆肥条件下包装材料极限有氧生物降解性的评估二氧化碳释放的分析方法 |
Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide |
| EN 14047-2002 |
包装在水介质中包装材料极限有氧生物降解性的测定释放二氧化碳的分析方法 |
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
| EN 14048-2002 |
包装在水介质中包装材料极限有氧生物降解性的测定用闭式呼吸测定计测量需氧量的方法 |
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
| EN 1405-1998 |
民用水处理的化学品 藻酸钠 |
Chemicals used for treatment of water intended for human consumption - Sodium alginate |
| EN 14053-2003 |
包装由波纹或实心纤维板制造的包装材料型号和结构 |
Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
| EN 14054-2003 |
包装纸和纸板包装纸箱设计 |
Packaging - Paper and paperboard packaging - Design of cartons |
| EN 14056-2003 |
实验室家具设计和安装的建议 |
Laboratory furniture - Recommendations for design and installation |
| EN 14057-2003 |
铅及铅合金废料术语和定义 |
Lead and lead alloys - Scraps - Terms and definitions |
| EN 14058-2004 |
防护服.抵抗寒冷环境用防护服 |
|
| EN 14059-2002 |
装饰油灯安全要求和试验方法 |
Decorative oil lamps - Safety requirements and test methods |
| EN 1406-1998 |
民用水处理的化学品 改良淀粉 |
Chemicals used for treatment of water intended for human consumption - Modified starches |
| EN 14063-1-2004 |
热绝缘材料和产品.现场成形膨胀粘土轻集料产品.第1部分:松填装产品的安装前规范 |
|
| EN 14065-2002 |
纺织品洗衣房处理过的织物生物污染控制系统 |
Textiles - Laundry processed textiles - Biocontamination control system |
| EN 14066-2003 |
天然石材试验方法抗热冲击变质的测定 |
Natural stone test methods - Determination of resistance to ageing by thermal shock |
| EN 14067-1-2003 |
铁路应用空气动力学第1部分：符号和单位 |
Railway applications - Aerodynamics - Part 1: Symbols and units |
| EN 14067-2-2003 |
铁路设备空气动力学第2部分：开路轨道的空气动力学 |
Railway applications - Aerodynamics - Part 2: Aerodynamics on open track |
| EN 14067-3-2003 |
铁路设备空气动力学第3部分：隧道内的空气动力学 |
Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels |
| EN 1407-1998 |
民用水处理的化学品 阴离子和非离子聚丙烯酰胺 |
Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides |
| EN 14071-2004 |
LPG罐用减压阀.辅助设备 |
|
| EN 14073-2-2004 |
办公室家具.储存家具.第2部分:安全要求 |
|
| EN 14073-3-2004 |
办公室家具.储存家具.第3部分:结构稳定性和强度测定的试验方法 |
|
| EN 14074-2004 |
办公室家具.工作台、办公桌和储存家具.移动部件的强度和耐用性测定的试验方法 |
|
| EN 14075-2002 |
标准号： |
中文标题： |
| EN 14075-2004 |
的连续生产的液化石油气储存用固定焊接圆柱形钢罐.设计和制造 |
EN 14075-2004 |
| EN 14076-2004 |
木楼梯.术语 |
|
| EN 14079-2003 |
非特效医疗设备脱脂棉纱布、脱脂棉和粘胶纱布的性能要求和试验方法 |
Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze |
| EN 1408-1998 |
民用水处理的化学品：聚二烯丙基二甲基氯化铵 |
Chemicals used for treatment of water intended for human consumption - Poly(diallydimethylammonium chloride) |
| EN 14082-2003 |
食品 微量素的测定干灰化后用原子吸收光谱法（AAS）测定铅、镉、锌、铜、铁和铬 |
Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing |
| EN 14083-2003 |
食品微量素的测定加压煮解后用石墨炉原子吸收光谱法（GFAAS）测定铅、镉、铬和钼的测定 |
Foodstuffs - Determination of trace elements - Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion |
| EN 14084-2003 |
食品微量素的测定微波煮解后用原子吸收光谱法（AAS）测定铅、镉、锌、铜和铁 |
Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion |
| EN 14085-2003 |
弹性地板覆盖材料非固定地板的规范 |
Resilient floor coverings - Specification for floor panels for loose laying |
| EN 14086-2003 |
纸和纸板光泽度的测量用平行光束的45度光泽 DIN方法 |
Paper and board - Measurement of specular gloss - 45?gloss with a parallel beam, DIN method |
| EN 14089-2002 |
航天产品质量保证 最小搁置寿命材料的管理 |
Space products assurance - The control of limited shelf-life materials |
| EN 1409-1998 |
民用水处理的化学品：聚胺 |
Chemicals used for treatment of water intended for human consumption - Polyamines |
| EN 14090-2002 |
航天产品质量保证 航天材料筛屑的易燃试验 |
Space product assurance - Flammability testing for the screening of space materials |
| EN 14091-2002 |
航天产品质量保证 航天材料筛屑的热真空气体释放试验 |
Space product assurance - Thermal vacuum outgassing test for the screening of space materials |
| EN 14092-2002 |
航天工程空间环境 |
Space engineering - Space environment |
| EN 14093-2002 |
航天工程管理 管理章程和机构 |
Space project management - Organization and conduct of reviews |
| EN 14096-1-2003 |
无损检验X光胶片的数字化系统的条件第1部分：定义、图象质量参数的量化测量、标准参考胶片和定性控制 |
Non-destructive testing - Qualification of radiographic film digitalisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
| EN 14096-2-2003 |
无损检验X光胶片数字化系统的条件第2部分：最低限度的要求 |
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements |
| EN 14097-2001 |
航天产品质量保证 非一致性控制系统 |
Space product assurance - Nonconformance control system |
| EN 14098-2001 |
航天产品质量保证 航天材料筛屑的热循环试验和处理 |
Space product assurance - Thermal cycling test for the screening of space materials and processes |
| EN 14099-2001 |
航天产品质量保证 用压敏带测量涂层和面漆的抗剥落和抗撕裂强度 |
Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
| EN 141-2000 |
呼吸保护装置 气体过滤器和组合过滤器 要求、测试、标志 |
Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking |
| EN 1410-1998 |
民用水处理的化学品 阳离子聚丙烯酰胺 |
Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides |
| EN 14100-2001 |
航天产品质量保证 用于有人驾驶的航天宇航舱废的材料和装配器件的释放气体的测定 |
Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| EN 14101-2001 |
航天产品质量保证 控制应力腐蚀开裂用材料的选择 |
Space product assurance - Material selection for controlling stress-corrosion cracking |
| EN 14103-2003 |
脂肪和油脂衍物物 脂肪酸甲酯 酯和亚麻酸甲酯含量的测定 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents |
| EN 14104-2003 |
油和脂肪衍生物 脂肪酸甲酯 酸值的测定 |
Oil and fat derivatives - Fatty Acid Methyl Esters (FAME) - Determination of acid value |
| EN 14105-2003 |
脂肪和油脂衍生物 脂肪酸甲酯 (FAME)游离和全甘油和单酸甘油酯、甘油二酯、甘油三酯含量的测定（参考法 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents (Reference method) |
| EN 14106-2003 |
脂脂和油脂衍生物 脂肪酸甲酯 游离甘油含量的测定 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free glycerol content |
| EN 14107-2003 |
脂脂和油脂衍生物 脂肪酸甲酯 用感应耦合等离子发射光谱法测定磷含量 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductivity coupled plasma (ICP) emission spectrometry |
| EN 14108-2003 |
脂脂和油脂衍生物 脂肪酸甲酯 用原子吸收光谱法测定钠含量 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry |
| EN 14109-2003 |
脂脂和油脂衍生物 脂肪酸甲酯 用原子吸收光谱法测定钾含量 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry |
| EN 1411-1996 |
塑料管道和导管系统 热塑管 用阶梯法测定抗外冲击能力 |
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method |
| EN 14110-2003 |
脂脂和油脂衍生物 脂肪酸甲酯 甲醇含量的测定 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of methanol content |
| EN 141101-1992 |
空白详细规范：螺杆驱动的和旋转预调电位器 |
Blank detail specification: lead-screw actuated and rotary preset potentiometers |
| EN 14111-2003 |
油脂和脂肪衍生物 脂肪酸甲酯 碘值的测定 |
Oil and fat derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value |
| EN 14112-2003 |
脂脂和油脂衍生物 脂肪酸甲酯 氧化稳定性的测定(加速氧化试验) |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| EN 14114-2002 |
建筑设备和工业安装的温湿性能 水蒸气扩散量的计算 管子保冷系统 |
Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems |
| EN 14115-2001 |
纺织品 帐篷和大帐篷及相关产品的材料的燃烧性 易燃性 |
Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition |
| EN 14116-2003 |
危险货物运输罐 产品标识图案的数字格式 |
Tanks for transport of dangerous goods - Digital interface for the product recognition device |
| EN 14117-2004 |
混凝土结构的保护和维修用产品和系统.试验方法.粘性注入产品的流出时间测定 |
|
| EN 14118-1-2003 |
增强 纺织玻璃纤维垫规范（短切原丝薄毡和连续纤维薄毡） 第1部分：名称 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation |
| EN 14118-2-2003 |
增强 纺织玻璃纤维垫规范（短切原丝薄毡和连续纤维薄毡） 第2部分：一般要求和试验方法 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
| EN 14118-3-2003 |
增强 纺织玻璃纤维垫规范（短切原丝薄毡和连续纤维薄毡） 第3部分：特殊要求 |
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements |
| EN 14119-2003 |
纺织品的试验细菌影响的评估 |
Testing of textiles - Evaluation of the action of microfungi |
| EN 1412-1995 |
铜和铜合金 欧洲标准号系统 |
Copper and copper alloys - European numbering system |
| EN 14120-2003 |
防护服滚轴运动器械使用者的护腕、护踝、护膝和护肘要求和试验方法 |
Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods |
| EN 14121-2003 |
铝及铝合金电工用铝片、铝带和铝板 |
Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications |
| EN 14122-2003 |
食品用高效液相色谱法（HPLC）测定维生素B1 |
Foodstuffs - Determination of vitamin B1 by HPLC |
| EN 14123-2003 |
食品花生、阿月浑子、无花果和辣椒粉中黄曲霉素B1和总黄曲霉素B1、B2、G1和G2的测定用支柱衍化和免疫亲 |
Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method with postcolumn derivatization and immunoaffinity column clean-up |
| EN 14124-2004 |
带内溢水口的冲洗水箱用入口阀 |
|
| EN 14126-2003 |
防护服防传病毒防护服的性能要求和试验方法 |
Protective clothing - Performance requirements and tests methods for protective clothing against infective agents |
| EN 14127-2004 |
无损检验.超声波厚度测量 |
|
| EN 14129-2004 |
LPG罐用减压阀 |
|
| EN 1413-1998 |
纺织品 水萃取物pH值测定 |
Textiles - Determination of pH of aqueous extract |
| EN 14130-2003 |
食品用用高效液相色谱法（ＨＰＬC）测定维生素C |
Foodstuffs - Determination of vitamin C by HPLC |
| EN 14131-2003 |
食品 微生物鉴定法测定叶酸 |
Foodstuffs - Determination of folate by microbiological assay |
| EN 14132-2003 |
食品 大麦和烤制咖啡中赫曲毒素A的测定 用免疫亲合柱完成的高效液相色谱法（HPLC） |
Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up |
| EN 14133-2003 |
食品葡萄酒和啤酒中赫曲毒素A的测定 用免疫亲合柱完成的高效液相色谱法（HPLC） |
Foodstuffs - Determination of ochratoxin A in wine and beer - HPLC method with immunoaffinity column clean-up |
| EN 14134-2004 |
建筑物通风.住宅通风形态的性能试验和安装检查 |
|
| EN 14135-2004 |
涂层.防火能力的测定 |
|
| EN 14136-2004 |
体外诊断检验程序性能评估的外部质量评估方案的使用 |
|
| EN 14137-2003 |
邮政服务服务质量 已登记邮件丢失的检定方法以及使用跟踪系统的其它类型的邮政服务 |
Postal services - Quality of service - Measurement of loss of registered mail and other types of postal service using a track and trace system |
| EN 14139-2002 |
眼科光学 成品眼镜的规范 |
Ophthalmic optics - Specifications for ready-to-wear spectacles |
| EN 1414-1996 |
接触闭合扣锁 连续测试用循环程序 |
Touch and close fasteners - Cycling procedure for subsequent testing |
| EN 14140-2003 |
可运输的可重复充装的焊接液化石油气钢瓶 （LPG） 设计和结构的选择 |
Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction |
| EN 14142-1-2003 |
邮政服务 地址数据库 第1部分：邮政地址的组成部分 |
Postal services - Adress databases - Part 1: Components of postal adresses |
| EN 14143-2003 |
呼吸装置 自闭式呼吸潜水设备 要求、试验、标识 |
Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 14144-2003 |
救生圈 试验 要求 |
Lifebuoys - Requirements, tests |
| EN 14145-2003 |
救生圈固定架 |
Holders for lifebuoys |
| EN 14146-2004 |
天然石料试验方法.弹性的动态模量测定(通过基本的共振频率测量) |
|
| EN 14148-2003 |
食品 用高效液相色谱法（HPLC）测定维生素K1 |
Foodstuffs - Determination of vitamin K1 by HPLC |
| EN 14149-2003 |
包装 装满的运输包装和单荷载用旋转跌落法进行的冲击试验 |
Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop |
| EN 1415-1996 |
接触闭合扣锁 布织边撕裂的习性 |
Touch and close fasteners - Behaviour of slit selvedges |
| EN 14152-2003 |
食品 用高效液相色谱法（HPLC）测定维生素B2 |
Foodstuffs - Determination of vitamin B2 by HPLC |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com