标准号 |
中文名称 |
英文名称 |
DIN EN ISO 8502-6-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度评定的检验.第6部分:分析用可溶于水的杂质的萃取,布雷斯勒法(Bresle) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis; the Bresle method (ISO 8502-6:1995); German version EN ISO 8502- |
DIN EN ISO 8502-9-2001 |
涂料和有关产品使用前钢衬底的制备.表面清洁度评定试验.第9部分:水溶性盐热导测定的现场方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998); German version EN ISO |
DIN EN ISO 8503-1-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第1部分:喷砂处理表面的 ISO评定比较样板的规范和定义 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra |
DIN EN ISO 8503-2-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第2部分:喷砂处理表面的定级方法.比较方 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel; comparator proced |
DIN EN ISO 8503-3-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第3部分:ISO表面轮廓比较仪的校准方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
DIN EN ISO 8503-4-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第4部分:ISO表面轮廓比较仪的校准方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
DIN EN ISO 8504-1-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第1部分:总则 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000); German version EN ISO 8504-1:2001) |
DIN EN ISO 8504-2-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第2部分:喷砂清理 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001) |
DIN EN ISO 8504-3-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第3部分:手工工具和电动工具清洗 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993); German version EN ISO 8504-3:2001) |
DIN EN ISO 8536-1-2004 |
医用输液设备.第1部分:输液玻璃瓶 |
|
DIN EN ISO 8536-2 Berichtigung 1-2005 |
医用输液设备.第2部分:输液瓶塞.DIN EN ISO 8536-2-2003的勘误 |
|
DIN EN ISO 8536-2-2003 |
医用输液设备.第2部分:输液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2001); German version EN ISO 8536-2:2002, German and English texts |
DIN EN ISO 8536-8-2005 |
医用输液器具.第8部分:有压力输液仪的输液器具 |
|
DIN EN ISO 8537-2001 |
胰导素注射用的有或无针头的灭菌一次性使用注射器. |
Sterile single-use syringes, with or without needle, for insulin (ISO 8537:1991) (including Amendment AMD 1:2000); German version EN ISO 8537:1994 + A1:2000 |
DIN EN ISO 8561-1996 |
家用无霜制冷设备.强制循环冷却的冰箱,制冷机,冷冻机和低温制冷机.性能和测试方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods (ISO 8561:1995); German version EN ISO 8561:1 |
DIN EN ISO 8561/A1-1998 |
家用无霜制冷设备.制冷机,制冷机冷藏柜,冷冻食品储藏柜和用内压力空气循环冷却的食品冷藏柜特性和试验方法.补充件1:强易腐蚀品防腐用特殊冷冻箱 |
|
DIN EN ISO 8565-1995 |
金属和合金.大气腐蚀试验.野外试验的一般要求 |
Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992); German version EN ISO 8565-1995 |
DIN EN ISO 8580-1995 |
橡胶和塑料软管.稳定状态下抗紫外线的测定 |
(Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995) |
DIN EN ISO 8596-1996 |
眼科光学.视力检验.标准视力符号及其演示 |
(Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994); German version EN ISO 8596:1996) |
DIN EN ISO 8597-1996 |
眼科光学.视力检验.视力符号相关连接方法 |
(Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995); German version EN ISO 8597:1996) |
DIN EN ISO 8598-1998 |
光学和光学仪器.焦距计 |
(Optics and optical instruments - Focimeters (ISO 8598:1996); Deutsche Fassung EN ISO 8598:1998) |
DIN EN ISO 8599-1997 |
光学和光学仪器.接触镜片.光谱透射率和光透射率的测定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994); German version EN ISO 8599:1996 |
DIN EN ISO 8611-1-2004 |
物料搬运用托盘.平托盘.第1部分:试验方法 |
|
DIN EN ISO 8612-2001 |
眼科装置.眼压计 |
Ophthalmic instruments - Tonometers (ISO 8612:2001); German version EN ISO 8612:2001 |
DIN EN ISO 8618-1998 |
塑料.液态酚醛树脂.非挥发性物质的常规测定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995); German version EN ISO 8618:1998 |
DIN EN ISO 8619-1998 |
塑料.酚醛树脂粉.在加热玻璃板上流动距离的测定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:1995); German version EN ISO 8619:1998 |
DIN EN ISO 8624-2002 |
眼科光学.眼镜架.测量系统和术语 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2002); German version EN ISO 8624:2002 |
DIN EN ISO 8655-1-2002 |
活塞式容量测量仪器.第1部分:术语、一般要求和用户使用建议 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002); German version EN ISO 8655-1:2002 |
DIN EN ISO 8655-2-2002 |
活塞式容量测量仪器.第2部分:活塞式吸量管 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002); German version EN ISO 8655-2:2002 |
DIN EN ISO 8655-3-2002 |
活塞式容量测量仪器.第3部分:活塞式玻璃量管 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002); German version EN ISO 8655-3:2002 |
DIN EN ISO 8655-4-2002 |
活塞式容量测量仪器.第4部分:稀释器 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002); German version EN ISO 8655-4:2002 |
DIN EN ISO 8655-5-2002 |
活塞式容量测量仪器.第5部分:分配器 |
Piston-operated volumetric apparatus - Part 5: Dispenser (ISO 8655-5:2002); German version EN ISO 8655-5:2002 |
DIN EN ISO 8655-6-2002 |
活塞式容量测量仪器.第6部分:确定测量误差的重量分析法 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002); German version EN ISO 8655-6:2002 |
DIN EN ISO 8655-7-2005 |
活塞式容量测量仪器.第7部分:评估设备性能用非重量测量法(ISO 8655-1-2005); 德文版本 EN ISO 8655-1-2005 |
|
DIN EN ISO 8662-10 Berichtigung 1-2002 |
DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002)勘误 |
Corrigenda to DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002) |
DIN EN ISO 8662-10-1999 |
手提电动工具.手柄振动测量.第10部分:步冲轮廓机和剪切机械 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998); German version EN ISO 8662-10:1998 |
DIN EN ISO 8662-12-1997 |
便携式手提动力工具.手柄振动测量.第12部分:有往复作用的锯和锉和有摆动或旋转作用的锯 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997); German version EN ISO 8662-12:1997 |
DIN EN ISO 8662-13 Berichtigung 1-1999 |
对DIN EN ISO 8662-13:1997-10的校正 |
Corrigenda to DIN EN ISO 8662-13:1997-10 (EN ISO 8662-13:1997/AC:1998) |
DIN EN ISO 8662-13-1997 |
便携式手提动力工具.手柄振动测量.第13部分:模具研模机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997); German version EN ISO 8662-13:1997 |
DIN EN ISO 8662-14-1997 |
便携式手提动力工具.手柄机械振动的测量.第14部分:石料加工机和针式标定器 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996); German version EN ISO 8662-14:1996 |
DIN EN ISO 8662-4-1995 |
便携式手提动力工具.手柄振动的测量.第4部分:磨床 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994); German version EN ISO 8662-4:1995 |
DIN EN ISO 8662-6-1995 |
便携式手提动力工具.手柄振动的测量.第6部分:冲击式钻机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994); German version EN ISO 8662-6:1995 |
DIN EN ISO 8662-7-1997 |
便携式手提动力工具.手柄振动测量.第7部分:扳手,旋具与具有冲击,冲力和刻踞齿作用的螺纹滚子 |
Hand-held portable power tools - Measurement of vibration at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or rachet action (ISO 8662-7:1997); German version EN ISO 8662-7:1997 |
DIN EN ISO 8662-8-1997 |
便携式手提动力工具.手柄振动测量.第8部分:抛光和旋转,轨道和随机轨道砂轮机 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997); German version EN ISO 8662-8:1997 |
DIN EN ISO 8662-9-1997 |
便携式手提动力工具.手柄振动的测量.第9部分:夯实机 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996); Deutsche Fassung EN ISO 8662-9:1996 |
DIN EN ISO 8665 Berichtigung 1-2001 |
DIN EN ISO 8665-1995的勘误 |
Corrigendum to DIN EN ISO 8665:1995 (German version EN ISO 8665:1995/A1:2000) |
DIN EN ISO 8665-1995 |
小型船舶.船舶驱动电动机和装置.功率测量和说明 |
Small craft - Marine propulsion engines and systems - Power measurements and declarations (ISO 8665:1994); German version EN ISO 8665:1995 |
DIN EN ISO 8666-2003 |
小艇.主要数据 |
Small craft - Principal data (ISO 8666:2002); German version EN ISO 8666:2002 |
DIN EN ISO 8669-2-1997 |
尿收集袋.第2部分:要求和试验方法 |
Urine collection bags - Part 2: Requirements and test methods (ISO 8669-2:1996); German version EN ISO 8669-2:1996 |
DIN EN ISO 8670-2-1997 |
造口术收集袋.第2部分:要求和试验方法 |
Ostomy collection bags - Part 2: Requirements and test methods (ISO 8670-2:1996); German version EN ISO 8670-2:1996 |
DIN EN ISO 8673-2001 |
有米制细牙螺纹的1型六角螺母.产品等级A和B |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999); German version EN ISO 8673:2000 |
DIN EN ISO 8674-2001 |
有米制细牙螺纹的2型六角螺母.产品等级A和B |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999); German version EN ISO 8674:2000 |
DIN EN ISO 8675-2001 |
有米制细牙螺纹的六角薄螺母(倒角).产品等级A和B |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000 |
DIN EN ISO 8676-2001 |
有米制细牙螺纹的六角头螺钉.产品等级A和B |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000 |
DIN EN ISO 868-1998 |
塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度) |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985); German version EN ISO 868:1997 |
DIN EN ISO 8689-1-2000 |
水质.江河的生物分类.第1部分:对海底大型无脊椎动物调查的生物质量数据的解释指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000); German version EN ISO 8689-1:2000 |
DIN EN ISO 8689-2-2000 |
水质.江河的生物分类.第2部分:对海底大型无脊椎动物调查的生物质量数据的表示指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000); German version EN ISO 8689-2:2000 |
DIN EN ISO 8692-2005 |
水质.用单细胞绿藻进行淡水藻类生长抑制性试验 |
|
DIN EN ISO 8728-1999 |
造船和航海技术.航海用陀螺罗盘 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997); German version EN ISO 8728:1998 |
DIN EN ISO 8729-1999 |
造船和航海技术.海上雷达反光镜 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997); German version EN ISO 8729:1998 |
DIN EN ISO 8733-1998 |
未淬硬钢或奥氏体不锈钢制带内螺孔的平行销 |
Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997 |
DIN EN ISO 8734-1998 |
淬硬钢和马氏体不锈钢制平行销 |
Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997 |
DIN EN ISO 8735-1998 |
淬硬钢和马氏体不锈钢制带内螺纹的平行销 |
Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997 |
DIN EN ISO 8739-1998 |
槽销.带导向的全长平行槽 |
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997 |
DIN EN ISO 8740-1998 |
槽销.带倒角的全长平行槽 |
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997 |
DIN EN ISO 8741-1998 |
槽销.半长倒锥槽 |
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997 |
DIN EN ISO 8742-1998 |
槽销.三分之一长中心槽 |
Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997 |
DIN EN ISO 8743-1998 |
槽销.半长中心槽 |
Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997 |
DIN EN ISO 8744-1998 |
槽销.全长锥型槽 |
Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997 |
DIN EN ISO 8745-1998 |
槽销.半长锥型槽 |
Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997 |
DIN EN ISO 8746-1998 |
圆头槽销 |
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997 |
DIN EN ISO 8747-1998 |
沉头槽销 |
Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997 |
DIN EN ISO 8748-1998 |
弹簧型开口直销.重载盘绕式 |
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997); German version EN ISO 8748:1997 |
DIN EN ISO 8750-1998 |
弹簧型开口直销.标准负荷盘绕式 |
Spring-type straight pins - Coiled, standard duty (ISO 8750:1997); German version EN ISO 8750:1997 |
DIN EN ISO 8751-1998 |
弹簧型开口直销.轻负荷盘绕式 |
Spring-type straight pins - Coiled, light duty (ISO 8751:1997); German version EN ISO 8751:1997 |
DIN EN ISO 8752-1998 |
弹簧直销.开槽重型 |
Spring-type straight pins - Slotted, heavy duty (ISO 8752:1997); German version EN ISO 8752:1997 |
DIN EN ISO 8754-1995 |
石油产品.硫含量测定.能量分散X射线荧光法 |
Petroleum products - Determination of sulfur content - Energy-dispersive-X-ray fluorescence method (ISO 8754:1992); German version EN ISO 8754:1995 |
DIN EN ISO 8765-2001 |
有米制细牙螺纹的六角头螺栓.产品等级A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999); German version EN ISO 8765:2000 |
DIN EN ISO 877-1997 |
塑料.自然风化法,窗玻璃后照射法和用夫累内尔镜光照辐射加速风化法 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994): German version EN ISO 877:1996 |
DIN EN ISO 8780-1-1995 |
颜料和稀释剂.色散特性评定用色散方法.第1部分:前言 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990); German version EN ISO 8780-1:1995 |
DIN EN ISO 8780-2-1995 |
颜料和稀释剂.色散特性评定用色散方法.第2部分:色散用振荡摇动机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990); German version EN ISO 8780-2:1995 |
DIN EN ISO 8780-3-1995 |
颜料和稀释剂.色散特性评定用色散方法.第3部分:色散用高速叶轮机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990); German version EN ISO 8780-3:1995 |
DIN EN ISO 8780-4-1995 |
颜料和稀释剂.色散特性评定用色散方法.第4部分:色散用压片机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990); German version EN ISO 8780-4:1995 |
DIN EN ISO 8780-5-1995 |
颜料和稀释剂.色散特性评定用色散方法.第5部分:色散用自动研磨机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995 |
DIN EN ISO 8780-6-1995 |
颜料和稀释剂.色散特性评定用色散方法.第6部分:色散用三组镇压机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990); German version EN ISO 8780-6:1995 |
DIN EN ISO 8781-1-1995 |
颜料和稀释剂.色散特性评定方法.第1部分:有色颜料着色度变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990); German version EN ISO 8781-1:1995 |
DIN EN ISO 8781-2-1995 |
颜料和稀释剂.色散特性评定方法.第2部分:磨碎细度变化的评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind (ISO 8781-2:1990); German version EN ISO 8781-2:1995 |
DIN EN ISO 8781-3-1995 |
颜料和稀释剂.色散特性评定方法.第3部分:光泽变化评定 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss (ISO 8781-3:1990); German version EN ISO 8781-3:1995 |
DIN EN ISO 8785-1999 |
几何制品技术规格.表面不完全性.术语、定义和参数 |
Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999 |
DIN EN ISO 8795-2001 |
人类生活用水的塑料输水管道系统.迁移评定.塑料管、配件及其接头迁移值的测定 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001 |
DIN EN ISO 8799-1995 |
表面活性剂.硫酸乙氧乙醇和硫酸乙氧烷基苯酚.非硫化物含量的测量 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:1988); German version EN ISO 8799:1995 |
DIN EN ISO 8819-1995 |
液化石油气.硫化氢的测定.醋酸铅法 |
Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993); German version EN ISO 8819:1995 |
DIN EN ISO 8847-2004 |
小艇.操舵装置.钢索和滑轮系统 |
|
DIN EN ISO 8849-2004 |
小艇.电动直流舱底泵 |
(Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003); German version EN ISO 8849:2003) |
DIN EN ISO 8849-2004 |
小艇.电动直流舱底泵 |
|
DIN EN ISO 8861-1998 |
造船.柴油机船的发动机室的通风.设计要求和计算依据 |
Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998); German version EN ISO 8861:1998 |
DIN EN ISO 887-2000 |
通用米制螺栓、螺钉和螺母用的平垫圈.一般示意图 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000); German version EN ISO 887:2000 |
DIN EN ISO 8871-1-2004 |
非肠道及制药设备用弹性件.第1部分:水蒸汽中的提取物 |
|
DIN EN ISO 8871-2-2004 |
非肠道及制药设备用弹性件.第2部分:识别和表征 |
|
DIN EN ISO 8871-3-2004 |
非肠道及制药设备用弹性件.第3部分:释放粒子计数的测定 |
|
DIN EN ISO 8891-2000 |
贵金属含量至少为25%但小于75%的牙科用铸造合金 |
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998); German version EN ISO 8891:2000 |
DIN EN ISO 8892-1995 |
油料种子残渣.己烷总残留量的测定 |
Oilseed residues - Determination of total residual hexane (ISO 8892:1987); German version EN ISO 8892:1995 |
DIN EN ISO 8968-1-2002 |
牛奶.测定氮含量.第1部分:基耶达尔法 |
Milk - Determination of nitrogen content - Part 1: Kjeldahl method (ISO 8968-1:2001); German version EN ISO 8968-1:2001 |
DIN EN ISO 8968-2-2002 |
牛奶.测定氮含量.第2部分:分段容积法(宏观法) |
Milk - Determination of nitrogen content - Part 2: Block-digestion method (Macro method) (ISO 8968-2:2001); German version EN ISO 8968-2:2001 |
DIN EN ISO 8968-4-2002 |
牛奶.测定氮含量.第4部分:无蛋白质的氮含量测定 |
Milk - Determination of nitrogen content - Part 4: Determination of the non-protein-nitrogen content (ISO 8968-4:2001); German version EN ISO 8968-4:2001 |
DIN EN ISO 8968-5-2002 |
牛奶.测定氮含量.第5部分:蛋白质的氮含量测定 |
Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001); German version EN ISO 8968-5:2001 |
DIN EN ISO 8973-2000 |
液化石油气.密度和蒸气压力的计算 |
Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999 |
DIN EN ISO 8974-2002 |
塑料.酚醛树脂.用气体色谱法测定残余酚含量 |
Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002); German version EN ISO 8974:2002 |
DIN EN ISO 898-1-1999 |
碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺杆和双头螺栓 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999 |
DIN EN ISO 898-5-1998 |
碳钢和合金钢制连接件的机械性能.第5部分:螺销和类似非拉伸受力的连接件 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998 |
DIN EN ISO 898-6-1996 |
紧固件的机械性能.第6部分:带规定试验力的螺母.细牙螺纹 |
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995 |
DIN EN ISO 8980-1-1997 |
眼科光学.未打磨完成的眼镜片.第1部分:单光多焦透镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:1996); German version EN ISO 8980-1:1997 |
DIN EN ISO 8980-1-2004 |
眼科光学.未切边成品眼镜片.第1部分:单焦点和多焦点镜片规范 |
|
DIN EN ISO 8980-2-1997 |
眼科光学.未打磨完成的眼镜片.第2部分:渐变眼镜片规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:1996); German version EN ISO 8980-2:1997 |
DIN EN ISO 8980-2-2004 |
眼科光学.未切边成品眼镜片.第2部分:渐变焦眼镜片规范 |
|
DIN EN ISO 8980-3-1999 |
眼科光学.未打磨完成的眼镜片.第3部分:透射要求和检验方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:1999); German version EN ISO 8980-3:1999 |
DIN EN ISO 8980-4-2000 |
眼科光学.未打磨成品柔性焦距透镜组.第4部分:防反射涂层的试验方法和规范 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000); German version EN ISO 8980-4:2000 |
DIN EN ISO 8980-5-2005 |
眼科光学.未切边的成品眼镜镜片.第5部分:眼镜镜片表面耐磨性的最低要求 |
|
DIN EN ISO 8985-1998 |
塑料.乙烯/乙烯基乙酸盐共聚物(ENAC)热塑性.乙烯基乙酸盐含量的测定 |
Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998); German version EN ISO 8985:1998 |
DIN EN ISO 8986-1-1999 |
塑料.聚丁烯模制品和挤塑材料.第1部分:命名体系与基础规范. |
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993); German version EN ISO 8986-1:1999 |