标准号 |
中文名称 |
英文名称 |
DIN EN ISO 17652-3-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第3部分:热切割 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003); German version EN ISO 17652-3:2003) |
DIN EN ISO 17652-4-2003 |
焊接.与焊接及相关工艺有关的工厂底漆的试验.第4部分:焊接烟尘和气体的排放 |
(Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003); German version EN ISO 17652-4:2003) |
DIN EN ISO 17653-2003 |
金属材料焊缝的破坏检验.电阻点焊的扭转试验 |
Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2003); German version EN ISO 17653:2003 |
DIN EN ISO 17654-2003 |
金属材料焊缝的破坏检验.电阻焊接.电阻缝焊的压力试验 |
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003 |
DIN EN ISO 17655-2003 |
金属材料焊缝的破坏检验.δ铁素体测量用样品的准备方法 |
Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement (ISO 17655:2003); German version EN ISO 17655:2003 |
DIN EN ISO 17664-2004 |
医疗设备的消毒.由生产商提供的可再消毒医疗设备的处理过程的信息 |
|
DIN EN ISO 17693-2005 |
鞋靴.鞋帮的试验方法.耐磨损性 (ISO 17693-2004); 德文版本 EN ISO 17693-2005 |
|
DIN EN ISO 17695-2005 |
鞋靴.鞋帮试验方法.变形性(ISO 17695-2004); 德文版本 EN ISO 17695-2005 |
|
DIN EN ISO 177-1999 |
塑料.增塑剂扩散的测定 |
Plastics - Determination of migration of plasticizers (ISO 177:1988); German version EN ISO 177:1999 |
DIN EN ISO 17700-2005 |
鞋靴.鞋帮、鞋衬和鞋内衬试验方法.耐摩擦色牢度 |
|
DIN EN ISO 17707-2005 |
鞋靴.外底试验方法.耐弯性 |
|
DIN EN ISO 178-1997 |
塑料.弯曲性能测定 |
Plastics - Determination of flexural properties (ISO 178:1993); German version EN ISO 178:1996 |
DIN EN ISO 178-2003 |
塑料.弯曲性能测定 |
(Plastics - Determination of flexural properties (ISO 178:2001); German version EN ISO 178:2003) |
DIN EN ISO 17834-2004 |
热喷镀.防高温腐蚀和氧化的涂层 |
(Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003) |
DIN EN ISO 17834-2004 |
热喷镀.防高温腐蚀和氧化的涂层 |
|
DIN EN ISO 17836-2005 |
热喷涂.热喷涂熔敷效率的测定 |
|
DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
DIN EN ISO 17895-2005 |
色漆和清漆.低VOC乳化涂料的挥发性有机化合物含量测定 |
|
DIN EN ISO 179-1-2001 |
塑料.摆式冲击特性测定.第1部分:非仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000); German version EN ISO 179-1:2000 |
DIN EN ISO 179-2-2000 |
塑料.摆锤式冲击特性的测定.第2部分:仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999 |
DIN EN ISO 1797-1-1999 |
牙科用旋转器具.柄.第1部分:金属柄 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992 + AMD 1:1997) including Amendment A1:1999; German version EN ISO 1797-1:1995 + A1:1999 |
DIN EN ISO 1797-2-1995 |
牙科用旋转器具.柄.第2部分:塑料柄 |
Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992); German version EN ISO 1797-2:1995 |
DIN EN ISO 1798-2000 |
柔性泡沫聚合材料.抗拉强度和断裂时延伸率的测定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997); German version EN ISO 1798:1999 |
DIN EN ISO 17993-2004 |
水质.用液-液萃取后的荧光探测高效液相色谱法(HPLC)测定水中的15环芳香烃(PAH) |
|
DIN EN ISO 17994-2004 |
水质.确定微生物方法之间等效性的标准 |
|
DIN EN ISO 180-2001 |
塑料.伊兆特(Izod)冲击强度的测定 |
Plastics - Determination of Izod impact strength (ISO 180:2000); German version EN ISO 180:2000 |
DIN EN ISO 1806-2003 |
鱼网.测定拉网的筛网断裂力 |
Fishing nets - Determination of mesh breaking force of netting (ISO 1806:2002); German version EN ISO 1806:2002 |
DIN EN ISO 18064-2005 |
热塑性弹性体.术语和简化术语 |
|
DIN EN ISO 18064-2005 |
热塑性弹性体.术语和简化术语 |
|
DIN EN ISO 18104-2004 |
医疗信息学.护理用参考术语模式的综合 |
|
DIN EN ISO 182-2-2000 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高温时形成 其它酸性制品的趋势的测定.第2部分:pH值法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990); German version |
DIN EN ISO 182-3-2001 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高温时形成氯化氢和其它酸性制品的趋势的测定.第3部分:电导分析法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993); Ger |
DIN EN ISO 182-4-2001 |
塑料.基于氯乙烯均聚物和共聚物的混合物和制品在高温时形成氯化氢和其它酸性制品的趋势的测定.第4部分:电位测量法 |
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993); Ger |
DIN EN ISO 18265-2004 |
金属材料.硬度值的换算 |
(Metallic materials - Conversion of hardness values (ISO 18265:2003); German version EN ISO 18265:2003) |
DIN EN ISO 18265-2004 |
金属材料.硬度值的换算 |
|
DIN EN ISO 18273-2004 |
焊接消耗品.铝和铝合金焊接用焊丝电极、焊丝和焊棒.分类 |
|
DIN EN ISO 18274-2004 |
焊接消耗品.镍和镍合金熔焊用实心焊丝、条和棒材.分类 |
|
DIN EN ISO 18278-1-2005 |
电阻焊.可焊性.第1部分:金属材料的电阻点焊、缝焊和凸焊的可焊性评定 |
|
DIN EN ISO 18278-2-2005 |
电阻焊.可焊性.第2部分:点焊用薄钢板评定用备用程序 |
|
DIN EN ISO 18279-2004 |
铜焊.铜焊接头的缺陷 |
|
DIN EN ISO 183-1999 |
塑料.着色剂渗色的定性评估 |
Plastics - Qualitative evaluation of the bleeding of colorants (ISO 183:1976); German version EN ISO 183:1999 |
DIN EN ISO 1854-2000 |
乳清干酪.脂肪含量的测定.重量分析法(参照法) |
Whey cheese - Determination of fat content - Gravimetric method (Reference method) (ISO 1854:1999); German version EN ISO 1854:1999 |
DIN EN ISO 1856-2001 |
泡沫柔性聚合材料.压缩变形的测定 |
Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000); German version EN ISO 1856:2000 |
DIN EN ISO 186-2002 |
纸和纸板.测定平均质量取样 |
Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
DIN EN ISO 18609-2002 |
动植物脂肪和油.不皂化物测定.己烷提取法(ISO 18609:2000) |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000); German version EN ISO 18609:2001 |
DIN EN ISO 18613-2003 |
木制平托盘的修理 |
(Repair of flat wooden pallets (ISO 18613:2003); German version EN ISO 18613:2003) |
DIN EN ISO 1872-1-1999 |
塑料.聚乙烯(PE)模塑和挤制材料.第1部分:命名与基础规范 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993); German version EN ISO 1872-1:1999 |
DIN EN ISO 1872-2-2000 |
塑料.聚乙烯(PE)模塑和挤制材料.第2部分:试样制备和性能测定 |
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1872-2:1997 + A1:2000 |
DIN EN ISO 1873-1-1995 |
塑料.聚丙烯(PP)模塑和挤塑材料.第1部分:名称与符号系统和规范基础 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995); German version EN ISO 1873-1:1995 |
DIN EN ISO 1873-2-2000 |
塑料.聚丙烯(PP)模塑和挤制材料.第2部分:试样制备和性能测定 |
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1873-2:1997 + A1:2000 |
DIN EN ISO 1874-1-2001 |
塑料.注塑和挤压用聚酰胺(PA)模塑材料.第1部分:名称与符号 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation (ISO 1874-1:1992); German version EN ISO 1874-1:2000 |
DIN EN ISO 1874-2-1996 |
塑料.注塑和挤压用聚酰胺(PA)模塑材料.第2部分:试样的制备和性能的测定 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995); German version EN ISO 1874-2:1995 |
DIN EN ISO 18777-2005 |
医用可移动的液氧装置.特殊要求 |
|
DIN EN ISO 18777-2005 |
医用可移动的液氧装置.特殊要求 |
|
DIN EN ISO 18777-2005 |
医用可移动的液氧装置.特殊要求 |
|
DIN EN ISO 18778-2005 |
呼吸设备.婴儿监视器.特殊要求 |
|
DIN EN ISO 18778-2005 |
呼吸设备.婴儿监视器.特殊要求 |
|
DIN EN ISO 18778-2005 |
呼吸设备.婴儿监视器.特殊要求 |
|
DIN EN ISO 18779-2005 |
储存氧和氧混合物的医疗设备.特殊要求 |
|
DIN EN ISO 18779-2005 |
储存氧和氧混合物的医疗设备.特殊要求 |
|
DIN EN ISO 18779-2005 |
储存氧和氧混合物的医疗设备.特殊要求 |
|
DIN EN ISO 18812-2003 |
医疗信息学.临床分析仪与实验室信息系统的接口.配置文件的使用 |
(Health informatics - Clinical analyser interfaces to laboratory information systems - Use of profiles (ISO 18812:2003); German version EN ISO 18812:2003, text in English) |
DIN EN ISO 18856-2005 |
水质.用气相色谱法/质谱法测定被选邻苯二甲酸酯 |
|
DIN EN ISO 1886-1994 |
纺织玻璃纤维.批量纤维取样法 |
Reinforcement fibres - Sampling plans applicable to received batches (ISO 1886:1990); German version EN ISO 1886:1994 |
DIN EN ISO 1889-1997 |
增强丝纱.线密度的测定 |
Reinforcement yarns - Determination of linear density (ISO 1889:1997); German version EN ISO 1889:1997 |
DIN EN ISO 1890-1997 |
加固纱线.转数测定 |
Reinforcement yarns - Determination of twist (ISO 1890:1997); German version EN ISO 1890:1997 |
DIN EN ISO 19011-2002 |
质量和/或环境管理体系审核指南 |
Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002); German version EN ISO 19011:2002 |
DIN EN ISO 19101-2005 |
地理信息.参考模型 |
|
DIN EN ISO 19105-2005 |
地理信息.符合性及试验 |
|
DIN EN ISO 19107-2005 |
地理信息.空间图解 |
|
DIN EN ISO 19108-2005 |
地理信息.暂存概要 |
|
DIN EN ISO 19111-2005 |
地理信息.通过坐标系的空间定位 |
|
DIN EN ISO 19112-2005 |
地理信息.通过地理标识符的空间定位 |
|
DIN EN ISO 19113-2005 |
地理信息.质量原则 |
|
DIN EN ISO 19114-2005 |
地理信息.质量评定过程 |
|
DIN EN ISO 19115-2005 |
地理信息.数据 |
|
DIN EN ISO 19219-2004 |
动植物脂肪和油.粗脂肪和原油中可视沉淀物的测定 |
(Animal and vegetable fats and oils - Determination of visible foots in crude fats and oils (ISO 19219:2002); German version EN ISO 19219:2003) |
DIN EN ISO 19219-2004 |
动植物脂肪和油.粗脂肪和原油中可视沉淀物的测定 |
|
DIN EN ISO 1923-1995 |
泡沫塑料和橡胶.线性尺寸的测定 |
Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981); German version EN ISO 1923:1995 |
DIN EN ISO 1924-2-1995 |
纸和纸板.抗张性的测定,第2部分:恒定拉长法 |
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (ISO 1924-2:1994); German version EN ISO 1924-2:1995 |
DIN EN ISO 1942-5-1994 |
牙科词汇.第5部分:试验术语 |
Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989); German version EN ISO 1942-5:1994 |
DIN EN ISO 196-1995 |
锻铜和铜合金.残余应力的检测.硝酸汞(1)试验 |
Wrought copper and copper alloys - Detection of residual stress - Mercury(I)nitrate test (ISO 196:1978); German version EN ISO 196:1995 |
DIN EN ISO 1969-2005 |
纤维绳索.聚乙烯绳索.3和4股绳索 |
|
DIN EN ISO 1973-1995 |
纺织品.纤维.细度.重力测量法和振动法 |
Textiles - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995); German version EN ISO 1973:1995 |
DIN EN ISO 19879-2005 |
液压传动和通用金属管连接.液压传动连接的试验方法 |
|
DIN EN ISO 19900-2005 |
石油和天然气工业.近海建筑物的一般要求 |
|
DIN EN ISO 19900-2005 |
石油和天然气工业.近海建筑物的一般要求 |
|
DIN EN ISO 19901-4-2005 |
石油和天然气工业.近海建筑物的特殊要求.第4部分:土工和地基设计考虑 |
|
DIN EN ISO 19901-4-2005 |
石油和天然气工业.近海建筑物的特殊要求.第4部分:土工和地基设计考虑 |
|
DIN EN ISO 19901-5-2005 |
石油和天然气工业.近海建筑物的特殊要求.第5部分:设计和施工过程中的重量控制 |
|
DIN EN ISO 19901-5-2005 |
石油和天然气工业.近海建筑物的特殊要求.第5部分:设计和施工过程中的重量控制 |
|
DIN EN ISO 19952-2005 |
鞋靴.词汇 |
|
DIN EN ISO 19953-2004 |
鞋靴.鞋跟的试验方法.耐侧面冲击 |
|
DIN EN ISO 19956-2004 |
鞋靴.鞋跟的试验方法.耐疲劳性 |
|
DIN EN ISO 19957-2004 |
鞋靴.鞋跟的试验方法.鞋跟钉的保持力 |
|
DIN EN ISO 19958-2004 |
鞋靴.鞋跟和顶部的试验方法.顶部保持力 |
|
DIN EN ISO 19980-2005 |
眼科仪器.角膜局部解剖仪 |
|
DIN EN ISO 2009-1994 |
带槽沉头螺钉(通用头).产品等级A |
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994); German version EN ISO 2009:1994 |
DIN EN ISO 2010-1994 |
带槽半圆头沉头螺钉(通用头).产品等级A |
Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994); German version EN ISO 2010:1994 |
DIN EN ISO 20126-2005 |
牙科学.手动牙刷.一般要求和试验方法.(ISO 20126-2005); 德文版本 EN ISO 20126-2005 |
|
DIN EN ISO 20127-2005 |
牙科学.电动牙刷.一般要求和试验方法 |
|
DIN EN ISO 20200-2005 |
塑料.在实验室试验中模拟堆肥处理条件下测定塑料的分解度 |
|
DIN EN ISO 20344-2004 |
个人防护设备.鞋靴的试验方法 |
|
DIN EN ISO 20345-2004 |
个人防护设备.安全鞋靴 |
|
DIN EN ISO 20346-2004 |
个人防护设备.防护鞋 |
|
DIN EN ISO 20347-2004 |
个人防护设备.专业鞋 |
|
DIN EN ISO 2039-1-1996 |
塑料.硬度测定.第1部分:球压法 |
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:1993); German version EN ISO 2039-1:1996 |
DIN EN ISO 2039-1-2003 |
塑料.硬度测定.第1部分:压球法 |
(Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001); German version EN ISO 2039-1:2003) |
DIN EN ISO 2039-2-2000 |
塑料.硬度的测定.第2部分:洛氏硬度 |
Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987); German version EN ISO 2039-2:1999 |
DIN EN ISO 2060-1995 |
纺织品.筒子纱.线密度(单位长度的质量)的测定.绞纱法 |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994); German version EN ISO 2060:1995 |
DIN EN ISO 2061-1995 |
纺织品.纱线捻度的测定.直接计数法 |
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:1995); German version EN ISO 2061:1995 |
DIN EN ISO 2062 Bb.1-2001 |
纺织品.包装纱.单端断裂力和断裂拉伸的测定.拉伸评价实例 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break; Example for the evaluation of the tensile |
DIN EN ISO 2062-1995 |
纺织品.卷装纱.单纱断裂力和断裂伸长 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993); German version EN ISO 2062:1995 |
DIN EN ISO 20623-2004 |
石油和相关产品.液体的极限压力和抗磨性能的测定.四球法 |
|
DIN EN ISO 2063-2005 |
热喷涂.金属和其他无机涂层.锌、铝及其合金 |
|
DIN EN ISO 2063-2005 |
热喷涂.金属和其他无机涂层.锌、铝及其合金 |
|
DIN EN ISO 2064-2000 |
金属和其他无机物涂层.有关厚度测量的定义和惯例 |
Metallic and other non-organic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996); German version EN ISO 2064:2000 |
DIN EN ISO 20645-2005 |
纺织织物.抗菌活性的测定.琼脂扩散木片试验 |
|
DIN EN ISO 20763-2004 |
石油和相关产品.液压液耐磨性能的测定.叶片泵法 |
|