标准号 |
中文名称 |
英文名称 |
ISO 8361-1-1991 |
热塑塑料管和配件.吸水.第1部分:一般试验方法 |
Thermoplastics pipes and fittings; water absorption; part 1: general test method |
ISO 8361-2-1991 |
热塑塑料管和配件.吸水.第2部分:未增塑聚(氯乙烯)(PVC-U)管和配件 |
Thermoplastics pipes and fittings; water absorption; part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings |
ISO 8361-3-1991 |
热塑塑料管和配件.吸水.第3部分:丙烯睛J(ABS)管和配件 |
Thermoplastics pipes and fittings; water absorption; part 3: test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings |
ISO 8362-1-1989 |
注射容器及附件.第1部分:用玻璃管制成的注射剂小瓶 |
Injection containers for injectables and accessories; part 1: injection vials made of glass tubing |
ISO 8362-1-2003 |
注射容器及附件.第1部分:管制玻璃注射瓶 |
(Injection containers and accessories - Part 1: Injection vials made of glass tubing) |
ISO 8362-1-2003 |
注射容器及附件.第1部分:管制玻璃注射瓶 |
|
ISO 8362-2-1988 |
注射容器及附件.第2部分:注射瓶的封口 |
Injection containers for injectables and accessories; part 2: closures for injection vials |
ISO 8362-3-2001 |
注射容器及附件.第3部分:注射小瓶用的铝盖 |
Injection containers and accessories - Part 3: Aluminium caps for injection vials |
ISO 8362-3-2001 |
注射容器及附件.第3部分:注射小瓶用的铝盖 |
Injection containers and accessories - Part 3: Aluminium caps for injection vials |
ISO 8362-4-1989 |
注射容器及附件.第4部分:由模压玻璃制成的盛注射剂的小瓶 |
Injection containers for injectables and accessories; part 4: injection vials made of moulded glass |
ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
(Injection containers and accessories - Part 4: Injection vials made of moulded glass) |
ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
ISO 8362-4-2003 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
ISO 8362-5-1995 |
注射容器及附件.第2部分:注射剂小瓶用冷动干燥塞子 |
Injection containers for injectables and accessories - Part 5: Freeze drying closures for injection vials |
ISO 8362-6-1992 |
注射容器及附件.第6部分:注射小瓶用铝和塑料复合物制帽盖 |
Injection containers for injectables and accessories; part 6: caps made of aluminium-plastics combinations for injection vials |
ISO 8362-7-1995 |
注射容器及附件.第7部分:无重叠塑料部件的由铝和塑料复合物制的注射小瓶帽盖 |
Injection containers for injectables and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part |
ISO 8364-1999 |
高山雪橇和滑雪板装配.捆绑安装区域.要求和试验方法 |
Alpine skis and bindings - Binding mounting area - Requirements and test methods |
ISO 8366-1987 |
涂敷磨料砂带制品.非标准制品的尺寸公差 |
Coated abrasive products; Dimensional tolerances on non-standard conversions |
ISO 8367-1-1993 |
包装.一般用途袋子的尺寸公差.第1部分:纸袋 |
Packaging; dimensional tolerances for general purpose sacks; part 1: paper sacks |
ISO 8367-2-1993 |
包装.一般用途袋子的尺寸公差.第2部分:热塑塑料薄膜袋 |
Packaging; dimensional tolerances for general purpose sacks; part 2: sacks made from thermoplastic flexible film |
ISO 8368-1999 |
水文测定.用构架对开放明渠的流量测定.构架选择指南 |
Hydrometric determinations - Flow measurements in open channels using structures - Guidelines for selection of structure |
ISO 8370-1-1993 |
皮带传动.测定俯仰区位置的动态试验.第1部分:V形皮带 |
Belt drives; dynamic test to determine pitch zone location; part 1: V-belts |
ISO 8370-2-1993 |
皮带传动.测定仰区位置的动态试验.第2部分:V形有筋皮带 |
Belt drives; dynamic test to determine pitch zone location; part 2: V-ribbed belts |
ISO 8371-1994 |
铁矿石.爆裂系数的测定 |
Iron ores - Determination of decrepitation index |
ISO 8372-1987 |
信息处理.64位字组密码算法的操作方式 |
Information processing; Modes of operation for a 64-bit block cipher algorithm |
ISO 8373 AMD 1-1996 |
操作工业机器人的词汇.补充件1:附录B:多种语言的附录 |
Manipulating industrial robots - Vocabulary; Amendment 1: Annex B - Multilingual annex |
ISO 8373 Technical Corrigendum 1-1996 |
操作工业机器人.词汇.技术勘误1 |
Manipulating industrial robots - Vocabulary; Technical corrigendum 1 |
ISO 8373-1994 |
操作工业机器人.词汇 |
Manipulating industrial robots - Vocabulary |
ISO 8374-2001 |
摄影.ISO安全光条件的测定 |
Photography - Determination of ISO safelight conditions |
ISO 8375-1985 |
结构尺寸的实心木材.某些物理和机械性能的测定 |
Solid timber in structural sizes; Determination of some physical and mechanical properties |
ISO 8377-1-1992 |
娱乐旅居车.大篷车.第1部分:居住要求 |
Leisure accomodation vehicles; motor caravans; part 1: habitation requirements |
ISO 8377-2-1992 |
娱乐旅居车.大篷车.第2部分:燃油和燃液化石油气的空间加热器的安装 |
Leisure accomodation vehicles; motor caravans; part 2: installation of oil-fired and liquefied petroleum gas-fired space heaters |
ISO 8378-1-1986 |
信息处理.以限定的频率7958次磁通变换/弧度和3.8次变换/mm(96次变换/in)在两侧调制录制的130mm(5.25in)盒式软磁盘的数据交换.第1部分:尺寸、物理和磁性特征 |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides; Part 1 : Dimensional, physical and magnetic characteristics |
ISO 8378-2-1986 |
信息处理.以限定的频率7958次磁通变换/弧度和3.8次变换/mm(96次变换/in)在两侧调制录制的130mm(5.25in)盒式软磁盘的数据交换.第2部分:磁道排列格式A |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides; Part 2 : Track format A |
ISO 8378-3-1986 |
信息处理.以限定的频率7958ftprad和3.8tpmm(96次变/in)在两侧调制录制的130mm(5.25in)盒式软磁盘的数据交换.第3部分:磁道格式B |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad; 3,8 tpmm (96 tpi), on both sides; Part 3 : Track format B |
ISO 8379 AMD 1-2001 |
不平地带卡车.稳定性试验.修改件1 |
Rough terrain trucks - Stability tests; Amendment 1 |
ISO 8379-1998 |
越野卡车.稳定性试验 |
Rough terrain trucks - Stability tests |
ISO 838-1974 |
纸.通用装订孔.规格 |
Paper; Holes for general filing purposes; Specifications |
ISO 8380-1993 |
林业机械.手提式灌木切割机和修草机.切割装置保护强度 |
Forestry machinery; portable brush cutters and grass-trimmers; cutting attachment guard strength |
ISO 8381-2000 |
以奶为基料的婴儿食品.脂肪含量的测定.重量分析法(基准方法) |
Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) |
ISO 8382-1988 |
用于人的复苏器 |
Resuscitators intended for use with humans |
ISO 8383-1985 |
船上升降机.具体要求 |
Lifts on ships; Specific requirements |
ISO 8384-2000 |
船舶和造船技术.挖泥船.词汇 |
Ships and marine technology - Dredgers - Vocabulary |
ISO 8385-1999 |
船和海船术语.挖泥船.分类 |
Ships and marine technology - Dredgers - Classification |
ISO 8388-1998 |
针织物.种类.词汇 |
Knitted fabrics - Types - Vocabulary |
ISO 839-1-1976 |
7/24锥度的铣刀轴.第1部分:尺寸 |
Milling machine arbors with 7/24 tapers; Part I : Dimensions |
ISO 839-2-1977 |
7/24锥度的铣刀轴.第2部分:附件 |
Milling machine arbors with 7/24 tapers; Part II : Accessories |
ISO 8391-1-1986 |
食品的陶瓷蒸煮器皿.铅和镉的释放.第1部分:试验方法 |
Ceramic cookware in contact with food; Release of lead and cadmium; Part 1 : Method of test |
ISO 8391-2-1986 |
食品的陶瓷蒸煮器皿.铅和镉的释放.第2部分:容许范围 |
Ceramic cookware in contact with food; Release of lead and cadmium; Part 2 : Permissible limits |
ISO 8394-1988 |
建筑结构.接缝产品.单组分密封剂可挤压性的测定 |
Building construction; jointing products; determination of extrudability of one-component sealants |
ISO 8395-1995 |
电影摄影.70 mm 电影磁带再生产的试验胶片的出版印刷规范 |
Cinematography - Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes - Specifications |
ISO 8397-1988 |
固体肥料和土壤改良剂.筛分试验 |
Solid fertilizers and soil conditioners; test sieving |
ISO 8398-1989 |
固体肥料.静态休止角的测量 |
Solid fertilizers; measurement of static angle of repose |
ISO 8399-1-1998 |
航空航天.附属设备和安装法兰(米制系列).第1部分:设计规范 |
Aerospace - Accessory drives and mounting flanges (Metric series) - Part 1: Design criteria |
ISO 8399-2-1998 |
航空航天.附属设备和安装法兰(米制系列).第2部分:尺寸 |
Aerospace - Accessory drives and mounting flanges (Metric series) - Part 2: Dimensions |
ISO 8400-1985 |
电影技术.16mm电影拷贝乳剂层面的位置.标志 |
Cinematography; Position of emulsion surface of 16 mm motion-picture prints; Identification |
ISO 8401-1986 |
金属镀层.延展性的测量方法述评 |
Metallic coatings; Review of methods of measurement of ductility |
ISO 8404-1986 |
角销.基本尺寸 |
Angle pins; Basic dimensions |
ISO 8404-2003 |
铸模用工具.斜销 |
|
ISO 8404-2003 |
铸模用工具.斜销 |
|
ISO 8405-1998 |
铸模工具.圆柱头顶杆的推顶套.一般用途的基本系列 |
Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes |
ISO 8406-2001 |
铸模用工具.铸模基座.圆形定位件和垫片 |
Tools for moulding - Mould bases - Round locating elements and spacers |
ISO 8407-1991 |
金属和合金的耐腐蚀性.腐蚀试样中腐蚀生成物的清除 |
Corrosion of metals and alloys; removal of corrosion products from corrosion test specimens |
ISO 841-2001 |
工业自动化系统和集成.机床的数字控制.坐标系和运动专用术语 |
Industrial automation systems and integration - Numerical control of machines - Coordinate system and motion nomenclature |
ISO 8419-2003 |
带传动.窄V带.截面9N/J, 15N/J和25N/J(有效长度系列) |
Belt drives - Narrow V-belts - Sections 9N/J, 15N/J and 25N/J (lengths in the effective system) |
ISO 8419-2003 |
带传动.窄V带.截面9N/J, 15N/J和25N/J(有效长度系列) |
|
ISO 8420 Technical Corrigendum 1-2004 |
动植物脂肪和油.极性化合物的含量测定.技术勘误1 |
|
ISO 8420-2002 |
动植物脂肪和油.极性化合物含量测定 |
Animal and vegetable fats and oils - Determination of content of polar compounds |
ISO 8421-1-1987 |
火灾防护措施.词汇.第1部分:火灾的一般术语和现象.两种语言版 |
Fire protection; Vocabulary; Part 1 : General terms and phenomena of fire Bilingual edition |
ISO 8421-2-1987 |
火灾防护措施.词汇.第2部分:结构性防火.两种语言版 |
Fire protection; Vocabulary; Part 2 : Structural fire protection Bilingual edition |
ISO 8421-3-1989 |
火灾防护措施.词汇.第3部分:火警的探测和报警 |
Fire protection; vocabulary; part 3: fire detection and alarm |
ISO 8421-4-1990 |
火灾防护措施.词汇.第4部分:灭火设备 |
Fire protection; vocabulary; part 4: fire extinction equipment |
ISO 8421-5-1988 |
防火.术语.第5部分:烟雾控制 |
Fire protection; vocabulary; part 5: smoke control |
ISO 8421-6-1987 |
火灾防护措施.词汇.第6部分:撤离和疏散方式.两种语言版 |
Fire protection; Vocabulary; Part 6 : Evacuation and means of escape Bilingual edition |
ISO 8421-7-1987 |
火灾防护措施.词汇.第7部分:爆炸的探测和排除方法.两种语言版 |
Fire protection; Vocabulary; Part 7 : Explosion detection and suppression means Bilingual edition |
ISO 8421-8-1990 |
火灾防护措施.词汇.第8部分:消防.营救设施和使用危险器材的专用术语 |
Fire protection; vocabulary; part 8: terms specific to fire-fighting, rescue services and handling hazardous materials |
ISO 8422 Technical Corrigendum 1-1993 |
属性检验的序列抽样方案.技术勘误表1 |
Sequential sampling plans for inspection by attributes; technical corrigendum 1 |
ISO 8422-1991 |
计数检验的序贯抽样方案 |
Sequential sampling plans for inspection by attributes |
ISO 8423 Technical Corrigendum 1-1993 |
百分比不一致(已知标准偏差)用变量检验的序列抽样方案.技术勘误表1 |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation); technical corrigendum 1 |
ISO 8423-1991 |
不合格百分率计量检验的序贯抽样方案(已知标准偏差) |
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
ISO 8424-1996 |
光学玻璃坯料.抗25℃含水酸溶液腐蚀性.试验和分类 |
Raw optical glass - Resistance to attack by aqueous acidic solutions at 25 鳦 - Test method and classification |
ISO 8425-1987 |
纯硝酸钚溶液中钚的测定.重量法 |
Determination of plutonium in pure plutonium nitrate solutions; Gravimetric method |
ISO 8426-1988 |
液压传动.正排量泵及电动机.确定导出的负载能力 |
Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity |
ISO 8429-1986 |
光学和光学仪器.眼科学.分度盘刻度 |
Optics and optical instruments; Ophthalmology; Graduated dial scale |
ISO 843-1997 |
信息和文献工作.希腊字符对拉丁字符的转换 |
Information and documentation - Conversion of Greek characters into Latin characters |
ISO 8430-1-1988 |
电阻点焊.电极夹具.第1部分:锥形接头锥度1:10 |
Resistance spot welding; electrode holders; part 1: taper fixing 1:10 |
ISO 8430-2-1988 |
电阻点焊.电极夹具.第2部分:莫氏(morse)锥形接头 |
Resistance spot welding; electrode holders; part 2: Morse taper fixing |
ISO 8430-3 Technical Corrigendum 1-1990 |
电阻点焊.焊条夹.第3部分:直柄端推入固定.技术勘误表1 |
Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust; technical corrigendum 1 |
ISO 8430-3-1988 |
电阻点焊.电极夹具.第3部分:端推力直柄接头 |
Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust |
ISO 8431-1988 |
造船.固定式转臂起重机.船用一般货物动臂起重机 |
Shipbuilding; fixed jib cranes; ship mounted type for general cargo handling |
ISO 8432-1987 |
香精油.用高性能液相色谱法分析.一般方法 |
Essential oils; Analysis by high performance liquid chromatography; General method |
ISO 8434-1-1994 |
液压传动和通用金属导管的接头.第1部分:24度压合接头 |
Metallic tube connections for fluid power and general use - Part 1: 24?compression fittings |
ISO 8434-2-1994 |
液压及通用金属管件.第2部分:37度喇叭口管件 |
Metallic tube fittings for fluid power and general use - Part 2: 37 flared fittings |
ISO 8434-3-1995 |
液压及通用金属管件.第3部分:O形面密封管件 |
Metallic tube connections for fluid power and general use - Part 3: O-ring face seal fittings |
ISO 8434-4-1995 |
液压及通用金属管连接件.第4部分:有O形面密封焊制管接头的24度圆锥体连接件 |
Metallic tube connections for fluid power and general use - Part 4: 24?cone connectors with O-ring weld-on nipples |
ISO 8434-5-1995 |
液压及通用金属连接管件.第5部分:加螺纹液压传动连接管件的试验方法 |
Metallic tube connections for fluid power and general use - Part 5: Test methods for threaded hydraulic fluid power connections |
ISO 8437 AMD 1-1997 |
扫雪机.安全要求和试验程序.修改件1 |
Snowthrowers - Safety requirements and test procedures; Amendment 1 |
ISO 8437-1989 |
扫雪机.安全要求和试验程序 |
Snowthrowers; Safety requirements and test procedures |
ISO 8439-1990 |
形状设计.基本配置 |
Forms design; basic layout |
ISO 844-2001 |
硬质泡沫塑料.压缩特性的测定 |
Rigid cellular plastics - Determination of compression properties |
ISO 844-2004 |
硬性泡沫塑料.压缩特性的测定 |
|
ISO 8440 Technical Corrigendum 1-2000 |
贸易文件中代码的位置.技术勘误1 |
Location of codes in trade documents - Technical Corrigendum 1 |
ISO 8440-1986 |
贸易文件编码位置 |
Location of codes in trade documents |
ISO 8442-1-1997 |
与餐具有关的材料和物件.餐具和凹形餐具.第1部分:食物准备餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food |
ISO 8442-3-1997 |
与餐具有关的材料和物件.餐具和凹形餐具.第3部分:银盘和装饰性凹盘的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silver-plated table and decorative holloware |
ISO 8442-5-2004 |
与食品接触的材料和制品.刀具和凹形餐具.第5部分:刀具的锋利性和刃口保持的试验规范 |
|
ISO 8442-6-2000 |
与食品接触的材料和物品.餐具和凹型餐具.第6部分:薄镀银的由清漆保护的台式凹形餐具 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver-plated table holloware protected by lacquer |
ISO 8442-7-2000 |
与食品接触的材料和物品.餐具和凹型餐具.第7部分:由银、其他贵金属及其合金制成的刀叉餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys |
ISO 8442-8-2000 |
与食品接触的材料和物品.餐具和凹型餐具.第8部分:银制餐具和装饰性凹形餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware |
ISO 8443-1999 |
滚动轴承.带法兰外圈的径向滚珠轴承.法兰尺寸 |
Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions |
ISO 8444-1985 |
管道工程.双层重叠式柔性金属软管(保护性碳钢壁内环形截面的有限密封铜胀环型) |
Pipework; Double overlap flexible metal hoses (copper packing, limited tightness, circular section, in protected carbon steel) |
ISO 8445-1995 |
管道工程.双层重叠式柔性金属软管(保护性碳钢壁内环形截面的有限密封石棉胀环型) |
Pipework - Double overlap flexible metal hoses (with packing, leakproof, circular section, in protected carbon steel) |
ISO 8446-1995 |
管道工程 .双层重叠式柔性金属软管(奥氏体不锈钢环形截面的密封石棉胀环型) |
Pipework - Double overlap flexible metal hoses (with packing, leakproof, circular section, in austenitic stainless steel) |
ISO 8447-1986 |
管道工程.单层重叠式柔性金属软管(保护性碳钢壁内环形或多边形截面的有限密封橡胶胀环型) |
Pipework; Single overlap flexible metal hoses (rubber packing, limited tightness, circular or polygonal section, in protected carbon steel) |
ISO 8448-1986 |
管道工程.双层重叠式柔性金属软管(保护性碳钢壁内环形或多边形截面有限密封的无胀环型) |
Pipework; Double overlap flexible metal hoses (unpacked, limited tightness, circular or polygonal section, in protected carbon steel) |
ISO 8449-1995 |
管道工程.单层重叠式挠性金属软管(保护性碳钢壁内环形或多边形截面的有限密封石棉胀环型) |
Pipework - Single overlap flexible metal hoses (with packing, limited tightness, circular or polygonal section, in protected carbon steel) |
ISO 845-1988 |
泡沫橡胶和塑料.表观密度的测定 |
Cellular plastics and rubbers; determinaiton of apparent (bulk) density |
ISO 8450-1986 |
管道工程.单层重叠式柔性金属软管(保护性碳钢壁内环形或多边形截面的无密封和无胀环型) |
Pipework; Single overlap flexible metal hoses (unpacked, no tightness, circular or polygonal section, in protected carbon steel) |
ISO 8454-1995 |
卷烟.雾相烟雾中一氧化碳的测定(非色散红外分析法) |
Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method |