标准号 |
中文名称 |
英文名称 |
ISO 9688-1990 |
机械振动和冲击.机械系统耐冲击的评定分析方法.供应厂商和用户之间分析用信息交换 |
(Mechanical vibration and shock; analytical methods of assessing shock resistance of mechanical systems; information exchange between suppliers and users of analyses) |
ISO 9689-1990 |
光学玻璃坯料.抗50℃含水碱性磷酸盐洗涤剂溶液腐蚀性.试验和分类 |
(Raw optical glass; resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 鳦; testing and classification) |
ISO 9691-1992 |
橡胶.管接头的环工艺推荐标准.缺陷的说明和分类 |
(Rubber; recommendations for the workmanship of pipe joint rings; description and classification of imperfections) |
ISO 9692-1-1992 |
涂剂焊条金属电弧焊、气体保护金属电弧焊和气焊.钢接缝的预处理 |
(Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding; joint preparations for steel) |
ISO 9692-1-2003 |
焊接和相关工艺.关于接缝准备的建议.第1部分:钢的手动金属电弧焊接、气体保护金属电弧焊、气焊、TIG焊接和束焊 |
|
ISO 9692-1992 |
涂剂焊条金属电弧焊.气体保护金属电弧焊和气焊.钢接头焊口加工 |
(Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding; joint preparations for steel) |
ISO 9692-2-1998 |
焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊 |
(Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels) |
ISO 9692-3-2000 |
焊接和相关工艺.接头制备的推荐方法.第3部分:铝和铝合金的金属极惰性气体保护焊和钨极惰性气体保护焊 |
(Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys) |
ISO 9692-4-2003 |
焊接和相关工艺.接头制备的建议.第4部分:包钢 |
(Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels) |
ISO 9692-4-2003 |
焊接和相关工艺.接头制备的建议.第4部分:包钢 |
|
ISO 9693-1999 |
牙科金属陶瓷修补系统 |
(Metal-ceramic dental restorative systems) |
ISO 9694-1996 |
牙科用磷酸酯粘结铸造包埋材料 |
(Dental phosphate-bonded casting investments) |
ISO 9696-1992 |
水质.淡水中总α放射性的测量.浓密源法 |
(Water quality; measurement of gross alpha activity in non-saline water; thick source method) |
ISO 9697-1992 |
水质.淡水中总β放射性的测量 |
(Water quality; measurement of gross beta activity in non-saline water) |
ISO 9698-1989 |
水质.氚活动浓度的测定.液体闪烁计数法 |
(Water quality; determination of tritium activity concentration; liquid scintillation counting method) |
ISO 9699-1994 |
建筑性能标准.简要检查表.建筑设计用简要内容 |
(Performance standards in building - Checklist for briefing - Contents of brief for building design) |
ISO 9702-1996 |
塑料制品.环氧氨硬化剂.对第1、2、3 氨组含氮量的测定 |
(Plastics - Amine epoxide hardeners - Determination of content of primary, secondary and tertiary amine group nitrogen content) |
ISO 9703-1-1992 |
麻醉和呼吸保护报警信号.第1部分:可视报警信号 |
(Anaesthesia and respiratory care alarm signals; part 1: visual alarm signals) |
ISO 9703-2-1994 |
麻醉和呼吸保护报警信号.第2部分:听音报警信号 |
(Anaesthesia and respiratory care alarm signals - Part 2: Auditory alarm signals) |
ISO 9703-3-1998 |
麻醉和呼吸护理报警信号.第3部分:警报应用指南 |
(Anaesthesia and respiratory care alarm signals - Part 3: Guidance on application of alarms) |
ISO 9704-1990 |
客车.刮水器装置.轴端和臂孔 |
(Passenger cars; wiper systems; shaft ends and arm-holes) |
ISO 9706-1994 |
情报和文献.文件用纸的耐用性的要求 |
(Information and documentation - Paper for documents - Requirements for permanence) |
ISO 9707-1991 |
情报和文献.图书、报纸、期刊和电子出版物的生产和销售的统计方法 |
(Information and documentation; statistics on the production and distribution of books, newspapers, periodicals and electronic publications) |
ISO 9711-1-1990 |
货运集装箱.与舷载集装箱有关的资料.第1部分:间档平面系统 |
(Freight containers; information related to containers on board vessels; part 1: bay plan system) |
ISO 9711-2-1990 |
货运集装箱.与船载集装箱有关的资料.第2部分:用户电报数据传输 |
(Freight containers; information related to containers on board vessels; part 2: telex data transmission) |
ISO 9712-1999 |
无损检验.人员资格鉴定 |
(Non-destructive testing - Qualification and certification of personnel) |
ISO 9713-2002 |
神经外科植入物.颅内动脉瘤自闭夹 |
(Neurosurgical implants - Self-closing intracranial aneurysm clips) |
ISO 9714-1-1991 |
整形外科钻孔设备.第1部分:钻刃,丝锥和沉头铣刀 |
(Orthopaedic drilling instruments; part 1: drill bits, taps and countersink cutters) |
ISO 9717-1990 |
金属用磷酸盐转化涂层.技术要求的规定 |
(Phosphate conversion coatings for metals; method of specifying requirements) |
ISO 9719-1995 |
根菜类的冷藏和冷藏运输 |
(Root vegetables - Cold storage and refrigerated transport) |
ISO 972-1997 |
辣椒和辣椒类.整椒或辣椒粉规范 |
(Chillies and capsicums, whole or ground (powdered) - Specification) |
ISO 9722-1992 |
镍和镍合金.锻制品的构成与外形 |
(Nickel and nickel alloys; composition and forms of wrought products) |
ISO 9723-1992 |
镍和镍合金棒材 |
(Nickel and nickel alloy bars) |
ISO 9724-1992 |
镍和镍合金线材以及拔丝原料 |
(Nickel and nickel alloy wire and drawing stock) |
ISO 9725-1992 |
镍和镍合金锻件 |
(Nickel and nickel alloy forgings) |
ISO 9727-1991 |
圆形天然软木塞.物理试验.参比方法 |
(Cylindrical stoppers of natural cork; physical tests; reference methods) |
ISO 973-1999 |
多香果(众香子)整果或(多香果)粉规范 |
(Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground - Specification) |
ISO 9735 DAM 1-1991 |
行政管理、商业和运输业的电子数据交换.应用及语法规则.修改1的草案 |
(Electronic data interchange for administration, commerce and transport (EDIFACT); application level syntax rules; amendment 1) |
ISO 9735-1-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第1部分:所有部分通用语法规则 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 1: Syntax rules common to all parts) |
ISO 9735-10-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第10部分:语法服务目录 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 10: Syntax service directories) |
ISO 9735-2-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第2部分:成批电子数据交换的专 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 2: Syntax rules specific to batch EDI) |
ISO 9735-3-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第3部分:交谈式电子数据交换的 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 3: Syntax rules specific to interactive EDI) |
ISO 9735-4-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第4部分:成批电子数据交换的业 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 4: Syntax and service report message for batch EDI (message type - CONTRL)) |
ISO 9735-5-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第5部分:成批电子数据交换的安 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of |
ISO 9735-6-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第6部分:安全可靠性和认知信息( |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 6: Secure authentication and acknowledgement message (Message type: AUTACK)) |
ISO 9735-7-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第7部分:成批电子数据交换的安 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 7: Security rules for batch EDI (confidentiality)) |
ISO 9735-8-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第8部分:电子数据交换用相关数 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 8: Associated data in EDI) |
ISO 9735-9-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第9部分:安全键和资格管理信息( |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 9: Security key and certificate management message (message type: KEYMAN)) |
ISO 9736-2000 |
航空航天.飞行器控制金属丝绳用钢制加螺纹有眼端.尺寸及荷载 |
(Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads) |
ISO 9737-2000 |
航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接有眼端.尺寸及荷载 |
(Aerospace - Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads) |
ISO 9738-2000 |
航空航天.飞行器控制金属丝绳用转筒.尺寸及荷载 |
(Aerospace - Turnbarrels, for aircraft control wire rope - Dimensions and loads) |
ISO 974-2000 |
塑料.冲击脆化温度的测定 |
(Plastics - Determination of the brittleness temperature by impact) |
ISO 9747-2000 |
航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接双柄球端.尺寸及荷载 |
(Aerospace - Double-shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads) |
ISO 9748-2000 |
航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接球端.尺寸及荷载 |
(Aerospace - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads) |
ISO 9749-2000 |
航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接双头螺栓端.尺寸及荷载 |
(Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads) |
ISO 975-2000 |
褐煤.甲苯可溶萃取物产率的测定.半自动法 |
(Brown coals and lignites - Determination of yield of benzene-soluble extract - Semi-automtic method) |
ISO 9757-2000 |
航空航天.飞行器控制金属丝绳用钢制加螺纹叉形杆端.尺寸及荷载 |
(Aerospace - Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads) |
ISO 9758-2000 |
航空航天.飞行器控制金属丝绳用滚动轴承的钢制加螺纹叉形杆端.尺寸及荷载 |
(Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads) |
ISO 9759-2000 |
航空航天.在飞机控制电缆上锻造的耐腐蚀钢制叉形杆端.尺寸和负载 |
(Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads) |
ISO 976-1996 |
橡胶和塑料.高聚物的分布和胶乳.pH值测定 |
(Rubber and plastics - Polymer dispersions and rubber latices - Determination of pH) |
ISO 9760-2000 |
航空航天.在飞机控制电缆上锻造的滚动轴承用耐腐蚀钢制叉形杆端.尺寸和负载 |
(Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads) |
ISO 9761-2000 |
航空航天.飞行器控制金属丝绳用耐腐蚀钢制锁定卡箍.尺寸 |
(Aerospace - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles - Dimensions) |
ISO 9762-2000 |
航空航天.飞机控制电缆组件.尺寸和终端固定组件 |
(Aerospace - Aircraft control wire rope assemblies - Dimensions and end-fitting combinations) |
ISO 9763-1999 |
航空航天.飞行器控制线绳组件.技术规范 |
(Aerospace - Aircraft control wire rope assemblies - Technical specification) |
ISO 9764-1989 |
压力容器电阻焊管和感应焊接钢管.纵向缺陷检验用焊缝的超声波试验 |
(Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections) |
ISO 9765-1990 |
埋弧焊承压钢管.纵向和(或)横向缺陷测定超声波试验 |
(Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections) |
ISO 9766-1990 |
带可转位刀片的钻头.带扁方的圆柱柄 |
(Drills with indexable inserts; cylindrical shanks with a parallel flat) |
ISO 9767-1990 |
摄影术.架空放影机.性能的测量和测量报告方法 |
(Photographie; overhead projectors; methods for measuring and reporting performance characteristics) |
ISO 9768 Technical Corrigendum 1-1998 |
茶.水萃取物的测定.技术勘误1 |
(Tea - Determination of water extract; Technical Corrigendum 1) |
ISO 9768-1994 |
茶.水萃取物的测定 |
(Tea - Determination of water extract) |
ISO 9770-1989 |
原油和石油产品.在638kg/m至1074kg/m范围内烃的压缩因数 |
(Crude petroleum and petroleum products; compressibility factors for hydrocarbons in the range 638 kg/m to 1074 kg/m) |
ISO 9771-1995 |
塑料.酚醛树.测定可溶酚醛树在酸性条件下的反应性 |
(Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions) |
ISO 9772 AMD 1-2003 |
泡沫塑料.小火焰小试样的水平燃烧特性的测定.修改件1:试样 |
(Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame; Amendment 1: Specimens) |
ISO 9772 AMD 1-2003 |
泡沫塑料.小火焰小试样的水平燃烧特性的测定.修改件1:试样 |
|
ISO 9772-2001 |
泡沫塑料.需用小火焰的小试样的水平燃烧特性的测定 |
(Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame) |
ISO 9773 AMD 1-2003 |
塑料.立式软薄试样与小火焰源接触的燃烧性能测定.修改件1:试样 |
(Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source; Amendment 1: Specimens) |
ISO 9773 AMD 1-2003 |
塑料.立式软薄试样与小火焰源接触的燃烧性能测定.修改件1:试样 |
|
ISO 9773-1998 |
塑料.立式软薄试样与小火焰源接触的燃烧性能测定 |
(Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source) |
ISO 9774-2004 |
建筑物设备的热绝缘.选择特性指南 |
|
ISO 9775-1990 |
小型船舶.装有单个功率15kW-40kW舷外动力机的远距离操作系统 |
(Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power) |
ISO 9776-1999 |
油,特别是去甲基的( L.var., Malinv.和var. Holmes) 油 |
(Oil of Mentha arvensis, partially dementholized (Mentha arvensis L. var. piperascens Malinv. and var. glabrata Holmes)) |
ISO 9778 Technical Corrigendum 1-1999 |
银行业务.确定贷款/保证金合同的格式.技术勘误1 |
(Banking - Forms for confirming loan/deposit contracts; Technical Corrigendum 1) |
ISO 9778-1994 |
银行业务.确定贷款/保证金合同的格式 |
(Banking - Forms for confirming loan/deposit contracts) |
ISO 9779-1993 |
冶金级萤石.铅含量的测定.溶剂萃取原子吸收光谱法 |
(Metallurgical-grade fluorspar; determination of lead content; solvent extraction atomic absorption spectrometric method) |
ISO 9782-1993 |
塑料.增强模压化合物和聚酯胶片.表现挥发物测定 |
(Plastics; reinforced moulding compounds and prepregs; determination of apparent volatile-matter content) |
ISO 9785-2002 |
船舶和海上技术.可行驶内燃机车辆的货舱的通风.气流总需量的理论计算 |
(Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required) |
ISO 9787-1999 |
操纵工业机器人.坐标系和运动术语 |
(Manipulating industrial robots - Coordinate systems and motion nomenclatures) |
ISO 9788-1990 |
空中货运设备.飞行器限定载货量为22250N(5000zbf),双螺栓装配铸件 |
(Air cargo equipment; cast components of double stud fitting assembly with a load capacity of 22250 N (5000 lbf), for aircraft cargo restraint) |
ISO 979-1974 |
工业用氢氧化钠.化验方法 |
(Sodium hydroxide for industrial use; Method of assay) |
ISO 98-2001 |
纺织机械和附件.纺前预处理机械和纺纱机械.上部卷轴的包纱主要尺寸 |
(Textile machinery and accessories - Spinning preparatory and spinning machinery - Main dimensions of coverings for top rollers) |
ISO 9801-1997 |
眼科仪器.测试箱镜头 |
(Ophthalmic instruments - Trial case lenses) |
ISO 9802-1996 |
原光学玻璃词汇 |
(Raw optical glass - Vocabulary) |
ISO 9803-1993 |
真空技术.管道配件.安装尺寸 |
(Vacuum technology; pipeline fittings; mounting dimensions) |
ISO 9806-1-1994 |
太阳能器的试验方法.第1部分:热性能及压降的测定 |
(Test methods for solar collectors - Part 1: Thermal performance of glazed liquid heating collectors including pressure drop) |
ISO 9806-3-1995 |
太阳能器的试验方法.第3部分:无光液体集热器热性能包括压力降 |
(Test methods for solar collectors - Part 3: Thermal performance of unglazed liquid heating collectors (sensible heat transfer only) including pressure drop) |
ISO 9807-1991 |
银行和有关金融业务.电文鉴别(零售)要求 |
(Banking and related financial services; requirements for message authentication (retail)) |
ISO 9808-1990 |
太阳能热水器.吸收器用橡胶材料.连接管与配件.评审方法 |
(Solar water heaters; elastomeric materials for absorbers, connecting pipes and fittings; method of assessment) |
ISO 9809-1-1999 |
气体瓶.可再填充的无缝钢瓶.设计、结构,和试验.第1部分:拉力强度低于1100MPa的淬火和回火钢瓶 |
(Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa) |
ISO 9809-2-2000 |
气瓶.可再填充的无缝钢制气瓶.设计、制造和试验.第2部分:拉力强度远大于或等于1100MPa的淬火和回火钢瓶 |
(Gas cylinders; Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa) |
ISO 9809-3-2000 |
气瓶.可再填充的无缝钢气瓶.设计、制造和试验.第3部分:标准钢瓶 |
(Gas cylinders - Refillable seamless steel gas cylinders; Design, construction and testing - Part 3: Normalized steel cylinders) |
ISO 981-1973 |
工业用氢氧化钠.氯化物含量的测定.汞液滴定法 |
(Sodium hydroxide for industrial use; Determination of chloride content; Mercurimetric method) |
ISO 9815-2003 |
道路车辆.承用车和挂车列车.横向稳定性试验 |
(Road vehicles - Passenger-car and trailer combinations - Lateral stability test) |
ISO 9815-2003 |
道路车辆.承用车和挂车列车.横向稳定性试验 |
|
ISO 9816-1993 |
客车.车辆转弯时的停车反作用力.开路试验方法 |
(Passenger cars; power-off reactions of a vehicle in a turn; open-loop test method) |
ISO 9817-1991 |
客车.发动机冷却系统.注水管嘴压力帽和斜坡座尺寸 |
(Passenger cars; engine cooling systems; dimensions of pressure caps and their ramp seats on filler necks) |
ISO 9818-1991 |
客车.发动机冷却系统.压力帽试验法和标志 |
(Passenger cars; engine cooling systems; test methods and marking of pressure caps) |
ISO 9825-1994 |
开式管道液体流量测量.大河和洪水流量野外测量 |
(Measurement of liquid flow in open channels - Field measurement of discharge in large rivers and floods) |
ISO 9826-1992 |
明渠液体流量测量.Parshall和SANIIRI水槽 |
(Measurement of liquid flow in open channels; Parshall and SANIIRI flumes) |
ISO 9827-1994 |
在开式通道中用溢流堰和斜槽测定液体流量.流线型三角断面溢流堰 |
(Measurement of liquid flow in open channels by weirs and flumes - Streamlined triangular profile weirs) |
ISO 9831-1998 |
饲料、动物产品和粪便或尿液.总热值测定.弹式热量计法 |
(Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method) |
ISO 9832-2002 |
动植物脂肪和油.残留乙烷含量测定 |
(Animal and vegetable fats and oils - Determination of residual technical hexane content) |
ISO 9833-1993 |
瓜的冷藏和瓜的冷藏运输 |
(Melons -- Cold storage and refrigerated transport) |
ISO 9835-1993 |
环境空气.黑烟指数的测定 |
(Ambient air; determination of a black smoke index) |
ISO 9836-1992 |
建筑物性能标准.面积和空间指示器定义和计算 |
(Performance standards in building; definition and calculation of area and space indicators) |
ISO 9838-1991 |
高山雪橇紧固.雪橇紧固试验用试验底板 |
(Alpine ski-bindings; test soles for ski-binding tests) |
ISO 9841-1991 |
海索草油(海索草药典林奈命名法) |
(Oil of Hyssop (Hyssopus officinalis linnaeus)) |
ISO 9842-2003 |
玫瑰油 |
(Oil of rose (Rosa x damascena Miller)) |
ISO 9842-2003 |
玫瑰油 |
|
ISO 9843-2002 |
杉木油.中国产地 |
(Oil of cedarwood, Chinese type (Cupressus funebris Endlicher)) |
ISO 9844-1991 |
苦橙油 |
(Citrus aurantium Linnaeus ssp.aurantium)(Oil of bitter orange (citrus aurantium linnaeus ssp. aurantium)) |