标准号 |
中文名称 |
英文名称 |
ISO 8536-1 AMD 1-2004 |
医用输液设备.第1部分:输液玻璃瓶.修改件1 |
|
ISO 8536-1-2000 |
医用输液设备.第1部分:输液玻璃瓶 |
Infusion equipment for medical use - Part 1: Infusion glass bottles |
ISO 8536-10-2004 |
医用输液器具.第10部分:与压力输液仪一起使用的流体线路附件 |
|
ISO 8536-10-2004 |
医用输液器具.第10部分:与压力输液仪一起使用的流体线路附件 |
|
ISO 8536-11-2004 |
医用输液器具.第11部分:与压力输液仪一起使用的输液过滤器 |
|
ISO 8536-11-2004 |
医用输液器具.第11部分:与压力输液仪一起使用的输液过滤器 |
|
ISO 8536-2 Technical Corrigendum 1-2003 |
医用输液设备.第2部分:输液瓶塞.技术勘误1 |
(Infusion equipment for medical use - Part 2: Closures for infusion bottles; Technical Corrigendum 1) |
ISO 8536-2 Technical Corrigendum 1-2003 |
医用输液设备.第2部分:输液瓶塞.技术勘误1 |
|
ISO 8536-2 Technical Corrigendum 1-2003 |
医用输液设备.第2部分:输液瓶塞.技术勘误1 |
|
ISO 8536-2-2001 |
医用输液设备.第2部分:输液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles |
ISO 8536-3-1999 |
医用输液设备.第3部分:输液瓶铝帽 |
Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles |
ISO 8536-4-1998 |
医用输液设备.第4部分:一次性使用输液器具,重力输送 |
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
ISO 8536-4-2004 |
医用输液器具.第4部分:一次性使用重力输液式输液器 |
|
ISO 8536-5-1992 |
医用输液设备.第5部分:滴定管式输液器 |
Infusion equipment for medical use; part 5: burette type infusion sets |
ISO 8536-5-2004 |
医用输液器具.第5部分:一次性使用重力输液的滴定管式输液器 |
|
ISO 8536-5-2004 |
医用输液器具.第5部分:一次性使用重力输液的滴定管式输液器 |
|
ISO 8536-6-1995 |
医用输液设备.第6部分:输液瓶的冷冻干燥瓶塞 |
Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles |
ISO 8536-7-1999 |
医用输液设备.第7部分:输液瓶用铝和塑料复合物制帽盖 |
Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles |
ISO 8536-8-2004 |
医用输液器具.第8部分:有压力输液仪的输液器具 |
|
ISO 8536-9-2004 |
医用输液器具.第9部分:与压力输液仪一起使用的流体线路 |
|
ISO 8536-9-2004 |
医用输液器具.第9部分:与压力输液仪一起使用的流体线路 |
|
ISO 8537 AMD 1-2000 |
注射胰导素用带针或无针头的无菌一次性注射器.修改件1 |
Sterile single-use syringes, with or without needle, for insulin, Amendment 1 |
ISO 8537-1991 |
胰岛素用有或无针头一次性无菌注射器 |
Sterile single-use syringes, with or without needle, for insulin |
ISO 8538-1999 |
航空航天.螺母,六角型,自锁,带镗孔和栓住螺母垫圈的,带MJ螺纹的规范.1100MPa(在周围环境温度下)/235C和1100MPa(在周围环境温度下)/425C.尺寸 |
Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 C, 1100 MPa (at ambient temperature)/315 C and 1100 MPa (at ambient temperature)/425 C - Dimensions |
ISO 8539-1986 |
与等级T(8)的链同时使用的锻钢起重组件 |
Forged steel lifting components for use with grade T(8) chain |
ISO 8540-1993 |
开式机械动力压力机.词汇 |
Open front mechanical power presses; vocabulary |
ISO 8541-1986 |
锰矿石和铬矿石.检验取样偏差和试样制备的实验方法 |
Manganese and chromium ores; Experimental methods for checking the bias of sampling and sample preparation |
ISO 8542-1986 |
锰矿石和铬矿石.质量变化评定的实验方法和检验取样精度的方法 |
Manganese and chromium ores; Experimental methods for evaluation of quality variation and methods for checking the precision of sampling |
ISO 8543-1998 |
铺地织物.质量(物质)测定方法 |
Textile floor coverings - Methods for determination of mass |
ISO 8548-1-1989 |
修复术和矫形学.肢缺陷.第1部分:先天肢缺陷描述方法 |
Prosthetics and orthotics; limb deficiencies; part 1: method of describing limb deficiencies present at birth |
ISO 8548-2-1993 |
修复术和矫形学.肢缺陷.第2部分:下肢切断术的描述方法 |
Prosthetics and orthotics; limb deficiencies; part 2: method of describing lower limb amputation stumps |
ISO 8548-3-1993 |
修复术和矫形学.肢缺陷.第3部分:上肢切断术描述方法 |
Prosthetics and orthotics; limb deficiencies; part 3: method of describing upper limb amputation stumps |
ISO 8548-4-1998 |
修复术和矫形学.肢缺陷.第4部分:导致切断的原因描述 |
Prosthetics and orthotics - Limb deficiencies - Part 4: Description of causal conditions leading to amputation |
ISO 8548-5-2003 |
修复术和矫形学.肢缺陷.第5部分:做过切除手术的病人临床状况的描述 |
(Prosthetics and orthotics - Limb deficiencies - Part 5: Description of the clinical condition of the person who has had an amputation) |
ISO 8548-5-2003 |
修复术和矫形学.肢缺陷.第5部分:做过切除手术的病人临床状况的描述 |
|
ISO 8549-1-1989 |
修复术和矫形学.词汇.第1部分:外部边缘假肢器官和外部器械矫形的一般术语 |
Prosthetics and orthotics; vocabulary; part 1: general terms for external limb protheses and external orthoses |
ISO 8549-2-1989 |
修复术和矫形学.词汇.第2部分:与外边缘假肢器官和这些假肢器官穿戴者有关的术语 |
Prosthetics and orthotics; vocabulary; part 2: terms relating to external limb prostheses and wearers of these prostheses |
ISO 8549-3-1989 |
修复术和矫形学.词汇.第3部分:与外部器械矫形有关的术语 |
Prosthetics and orthotics; vocabulary; part 3: terms relating to external orthoses |
ISO 855-1981 |
用压榨法榨取的意大利柠檬油 |
Oil of lemon, Italy, obtained by expression |
ISO 855-2003 |
用压榨法获得的[Citrus limon (L.) Burm. f.]柠檬油 |
(Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression ) |
ISO 855-2003 |
用压榨法获得的[Citrus limon (L.) Burm. f.]柠檬油 |
|
ISO 8551-2003 |
修复术和矫形学.功能缺陷.接受矫正器治疗的人员、临床治疗目标和矫正器功能要求的描述 |
(Prosthetics and orthotics - Functional deficiencies - Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis) |
ISO 8551-2003 |
修复术和矫形学.功能缺陷.接受矫正器治疗的人员、临床治疗目标和矫正器功能要求的描述 |
|
ISO 8552-2004 |
牛奶.嗜冷营养微生物的估测.21鳦时菌落计数技术(快速法) |
|
ISO 8553-2004 |
牛奶.微生物的计数.30鳦时的Plate-loop技术 |
|
ISO 8556-1986 |
铝矿石.磷含量的测定.钼的兰光分光光度测定法 |
Aluminium ores; Determination of phosphorus content; Molybdenum blue spectrophotometric method |
ISO 8557-1985 |
铝矿石.分析试样中吸湿性的测定.重量法 |
Aluminium ores; Determination of hygroscopic moisture in analytical samples; Gravimetric method |
ISO 8558-1985 |
铝矿石.预干燥试验试样的制备 |
Aluminiumn ores; Preparation of pre-dried test samples |
ISO 8559-1989 |
服装结构和人体测量.人体尺寸 |
Garment construction and anthropometric surveys; body dimensions |
ISO 856-1981 |
法国、意大利、英国和美国薄荷油 |
Oil of peppermint, France, Italy, United Kingdom and USA |
ISO 8560-1986 |
技术制图.建筑制图.模数尺寸管线和栅架的表示法 |
Technical drawings; Construction drawings; Representation of modular sizes, lines and grids |
ISO 8561 AMD 1-1997 |
家用无霜制冷设备.制冷机、制冷机冷藏柜、冷冻食品储藏柜和用内压力空气循环冷却的食品冷藏柜特性和试验方法.修改件1:强易腐蚀品防腐用特殊冷冻箱 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods; Amendement 1: Special compartments for the p |
ISO 8561-1995 |
家用无霜制冷设备.制冷机、制冷机冷藏柜、冷冻食品储藏柜和用内压力空气循环冷却的食品冷藏柜特性和试验方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods |
ISO 8562-1990 |
自行车.楔形角支撑杆 |
Cycles; stem wedge angle |
ISO 8563-1987 |
工业用丙烯和丁二烯.液相取样 |
Propylene and butadiene for industrial use; Sampling in the liquid phase |
ISO 8565-1992 |
金属和合金.大气腐蚀试验.野外试验的一般要求 |
Metals and alloys; atmospheric corrosion testing; general requirements for field tests |
ISO 8566-1-1992 |
起重机.驾驶室.第1部分:总则 |
Cranes; cabins; part 1: general |
ISO 8566-2-1995 |
起重机.驾驶室.第2部分:移动式起重机 |
Cranes - Cabins - Part 2: Mobile cranes |
ISO 8566-3-1992 |
起重机.驾驶室.第3部分:塔式起重机 |
Cranes; cabins; part 3: tower cranes |
ISO 8566-4-1998 |
起重机.驾驶室.第3部分:悬臂式起重机 |
Cranes - Cabins - Part 4: Jib cranes |
ISO 8566-5-1992 |
起重机.驾驶室.第5部分:高架移动式和门桥式起重机 |
Cranes; cabins; part 5: overhead travelling and portal bridge cranes |
ISO 8567 Technical Corrigendum 1-2004 |
电影.35mm和16mm电影发行拷贝字幕区域.尺寸和位置.技术勘误1 |
|
ISO 8567-2002 |
电影摄影.在35mm和16mm电影发行拷贝上说明字幕的最大允许区域.尺寸和位置 |
Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions |
ISO 8568-1989 |
机械冲击.试验机.特征和性能 |
Mechanical shock; testing machines; characteristics and performance |
ISO 8569-1996 |
机械振动和冲击.建筑物中的敏感设备冲击和振动效果的测量和评定 |
Mechanical vibration and shock - Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings |
ISO 857-1-1998 |
焊接及相关工艺.词汇.第1部分:金属焊接工艺 |
Welding and allied processes - Vocabulary - Part 1: Metal welding processes |
ISO 8570-1991 |
塑料.薄膜和薄片.冻裂温度测定 |
Plastics; film and sheeting; determination of cold-crack temperature |
ISO 8571-1 Technical Corrigendum 1-1991 |
信息处理系统.开放系统互连.文件输送、存取和管理.第1部分:概述.技术勘误表1 |
Information processing systems; Open Systems Interconnection; file transfer, access and management; part 1: general introduction; technical corrigendum 1 |
ISO 8571-1-1988 |
信息处理系统.开放系统互连.文件输送、存取和管理.第1部分:一般介绍 |
Information processing systems; Open Systems Interconnection; file transfer, access and management; Part 1: General introduction |
ISO 8571-2 Technical Corrigendum 1-1991 |
信息处理系统.开放系统互连.文件输送、存取和管理.第2部分:虚拟文件存储器定义.技术勘误表1 |
Information processing systems; Open Systems Interconnection; file transfer, access and management; part 2: virtual filestore definition; technical corrigendum 1 |
ISO 8571-2-1988 |
信息处理系统.开放系统互连.文件输送、存取和管理.第2部分:虚拟文件存储定义 |
Information processing sytems; Open Systems Interconnection; file transfer, access and management; Part 2: Virtual filestore definition |
ISO 8571-3 Technical Corrigendum 1-1991 |
信息处理系统.开放系统互连.文件输送、存取和管理.第3部分:文件服务定义.技术勘误表1 |
Information processing systems; Open Systems Interconnection; file transfer, access and management; part 3: file service definition; technical corrigendum 1 |
ISO 8571-3-1988 |
信息处理系统.开放系统互连.文件输送、存取和管理.第3部分:文件服务定义 |
Information processing systems; Open Systems Interconnection; file transfer, access and management; Part 3: File service definition |
ISO 8571-4 AMD 4-1992 |
信息处理系统.开放系统互连.文件传送、存取和管理.第4部分:文件协议规范.第4次修改 |
Information processing systems; Open Systems Interconnection; file transfer, access and management; part 4: file protocol specification; amendment 4 |
ISO 8571-4-1988 |
信息处理系统.开放系统互连.文件输送、存取和管理.第4部分:文件协议规范 |
Information processing systems; Open Systems Interconnection; file transfer, access and management; Part 4: File protocol specification |
ISO 8572-1991 |
由玻璃纤维增强热塑塑料制成的管子和配件.与压力有关的术语、压力与塑料管件之间关系的术语、安装和连接术语的定义 |
Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing |
ISO 8573-1 Technical Corrigendum 1-2002 |
压缩空气.第1部分:杂质和纯度等级.技术勘误 1 |
Compressed air - Part 1: Contaminants and purity classes; Technical Corrigendum 1 |
ISO 8573-1-2001 |
压缩空气.第1部分:杂质和纯度等级 |
Compressed air - Part 1: Contaminants and purity classes |
ISO 8573-2-1996 |
一般用途压缩空气.第2部分:气溶胶油含量的测试方法 |
Compressed air for general use - Part 2: Test methods for aerosol oil content |
ISO 8573-3-1999 |
压缩空气.第3部分:潮湿度测定的试验方法 |
Compressed air - Part 3: Test methods for measurement of humidity |
ISO 8573-4 Technical Corrigendum 1-2002 |
压缩空气.第4部分:固体颗粒含量的试验方法.技术勘误 1 |
Compressed air - Part 4: Test methods for solid particle content; Technical Corrigendum 1 |
ISO 8573-4-2001 |
压缩空气.第4部分:固体颗粒含量的试验方法 |
Compressed air - Part 4: Test methods for solid particle content |
ISO 8573-5-2001 |
压缩空气.第5部分:油汽和有机溶剂含量的试验方法 |
Compressed air - Part 5: Test methods of oil vapour and organic solvent content |
ISO 8573-6-2003 |
压缩空气.第6部分:气体污染物含量的试验方法 |
(Compressed air - Part 6: Test methods for gaseous contaminant content) |
ISO 8573-6-2003 |
压缩空气.第6部分:气体污染物含量的试验方法 |
|
ISO 8573-7-2003 |
压缩空气.第7部分:活微生物杂质含量的试验方法 |
(Compressed air - Part 7: Test method for viable microbiological contaminant content) |
ISO 8573-7-2003 |
压缩空气.第7部分:活微生物杂质含量的试验方法 |
|
ISO 8573-8-2004 |
压缩空气.第8部分:用质量浓度法测定固体颗粒含量的试验方法 |
|
ISO 8573-9-2004 |
压缩空气.第9部分:液态水含量测定的试验方法 |
|
ISO 8574-1990 |
航空航天.液压系统管道.合格试验 |
Aerospace; hydraulic system tubing; qualification tests |
ISO 8574-2004 |
航空航天.液压系统管路安装.弯管的合格试验 |
|
ISO 8575-1990 |
航空航天.液压系统.液压系统管道 |
Aerospace; fluid systems; hydraulic system tubing |
ISO 8576-1996 |
光学和光学仪器.显微镜.偏光显微镜的基准系统 |
Optics and optical instruments - Microscopes - Reference system of polarized light microscopy |
ISO 8577-1997 |
光学和光学仪器.显微镜的滤光器 |
Optics and optical instruments - Microscopes - Spectral filters |
ISO 8578 Technical Corrigendum 1-2002 |
光学和光学仪器.显微镜.物镜和目镜的标记.技术勘误1 |
Optics and optical instruments - Microscopes - Marking of objectives and eyepieces; Technical Corrigendum 1 |
ISO 8578-1997 |
光学和光学仪器.显微镜.物镜和目镜的标记 |
Optics and optical instruments - Microscopes - Marking of objectives and eyepieces |
ISO 8579-1-2002 |
齿轮装置验收规程.第1部分:空气载声的试验规程 |
Acceptance code for gear units - Part 1: Test code for airborne sound |
ISO 8579-2-1993 |
齿轮验收规程.第2部分:验收试验过程中齿轮装置机械振动测定 |
Acceptance code for gears; part 2: determination of mechanical vibrations of gear units during acceptance testing |
ISO 858-1973 |
网渔具.用号数制表示网衣纱线 |
Fishing nets; Designation of netting yarns in the Tex System |
ISO 8580-1987 |
橡胶和塑料软管.稳定状态下抗紫外线的测定 |
Rubber and plastics hoses; Determination of ultra-violet resistance under static conditions |
ISO 8583 Technical Corrigendum 1-1999 |
财物交易原电文卡.互换电文规范.技术勘误1 |
Financial transaction card originated messages - Interchange message specifications; Technical Corrigendum 1 |
ISO 8583-1-2003 |
金融交易卡原始电文.交换电文规范.第1部分:电文、数据和代码值 |
(Financial transaction card originated messages - Interchange message specifications - Part 1: Messages, data elements and code values) |
ISO 8583-1-2003 |
金融交易卡原始电文.交换电文规范.第1部分:电文、数据和代码值 |
|
ISO 8583-1993 |
财物交易原电文卡.互换电文规范 |
Financial transaction card originated messages; interchange message specifications |
ISO 8583-2-1998 |
财务交易卡原始信息.交换信息规范.第2部分:公共团体识别代码(IIC)使用和注册程序 |
Financial transaction card originated messages - Interchange message specifications - Part 2: Application and registration procedures for Institution Identification Codes (IIC) |
ISO 8583-3-1998 |
财务交易卡原始信息.交换信息规范.第3部分:代码的维护程序 |
Financial transaction card originated messages - Interchange message specifications - Part 3: Maintenance procedures for codes |
ISO 8583-3-2003 |
金融交易卡原始电文.交换电文规范.第3部分:电文、数据和代码的维护程序 |
(Financial transaction card originated messages - Interchange message specifications - Part 3: Maintenance procedures for messages, data elements and code values) |
ISO 8583-3-2003 |
金融交易卡原始电文.交换电文规范.第3部分:电文、数据和代码的维护程序 |
|
ISO 8586-1-1993 |
感官分析.鉴定员的选择、培训和监督的通用指南.第1部分:鉴定员的选择 |
Sensory analysis; general guidance for the selection, training and monitoring of assessors; part 1: selected assessors |
ISO 8586-2-1994 |
感官分析.鉴定员的选择、培训和监督的通用指南.第2部分:专家 |
Sensory analysis - General guidance for the selection, training and monitoring of assessors - Part 2: Experts |
ISO 8587-1988 |
感官分析.方法学.分类 |
Sensory analysis; methodology; ranking |
ISO 8588-1987 |
感官分析.方法学.A”-非A”试验 |
Sensory analysis; Methodology; A - not A test |
ISO 8589-1988 |
感官分析.试验室设计的一般导则 |
Sensory analysis; general guidance for the design of test rooms |
ISO 8590-1994 |
电影技术.在带磁条的70mm电影发行拷贝上录音.录音特性 |
Cinematography - Audio records on 70 mm motion-picture release prints with magnetic stripes - Recorded characteristic |
ISO 8591-1-1989 |
航空航天.锻铝和铝合金.验收试验和交货要求.第1部分:一般要求 |
Aerospace; wrought aluminium and aluminium alloys; inspection, testing and supply requirements; part 1: general requirements |
ISO 8595-1989 |
统计资料的说明.中值的估计 |
Interpretation of statistical data; estimation of a median |
ISO 8596-1994 |
眼科光学.视觉敏锐度测验.标准验光字体及其演示 |
Ophthalmic optics; visual acuity testing; standard optotype and its presentation |
ISO 8597 Technical Corrigendum 1-1995 |
光学和光学仪器.视觉敏锐度测验及相关的验光字体.技术勘误表1 |
Optics and optical instruments - Visual acuity testing - Method of correlating optotypes; Technical Corrigendum 1 |
ISO 8597-1994 |
光学和光学仪器.视觉敏锐度测试.相关的验光字体法 |
Optics and optical instruments - Visual acuity testing - Method of correlation optotypes |
ISO 8598 Technical Corrigendum 1-1998 |
光学和光学仪器.焦距计.技术勘误1 |
Optics and optical instruments - Focimeters; Technical corrigendum 1 |