标准号 |
中文名称 |
英文名称 |
BS ISO 9654-2004 |
电讯夹扭钳和剪切钳.专用钳.剪切钳 |
|
BS ISO 9655-2004 |
电讯夹扭钳和剪切钳.专用钳.夹扭钳 |
|
BS ISO 9656-2004 |
电讯夹扭钳和剪切钳.试验方法 |
|
BS ISO 9657-2004 |
电讯夹扭钳和剪切钳 通用技术要求 |
|
BS ISO 9667-1999 |
飞机地面供应设备.牵引杆 |
Aircraft ground support equipment - Tow bars |
BS ISO 9669-1995 |
货运集装箱系列1.罐式集装箱的表面接合 |
Series 1 freight containers - Interface connections for tank containers |
BS ISO 9711-1-1995 |
货运集装箱.与船载集装箱有关的资料.间档设计系统 |
Freight containers - Information related to containers on board vessels - Bay plan system |
BS ISO 9711-2-1995 |
货运集装箱.与船载集装箱有关的资料.电报数据传输 |
Freight containers - Information related to containers on board vessels - Telex data transmission |
BS ISO 9735-1-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.对所有部分共同的语法规则 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax rules common to all parts |
BS ISO 9735-10-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.句法专业目录 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax service directories |
BS ISO 9735-2-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据交换专用语法规则 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax rules specific to batch EDI |
BS ISO 9735-3-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.交互式电子数据交换专用语法规则 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax rules specific to interactive EDI |
BS ISO 9735-4-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据交换语法和服务报告电文 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Syntax and service report message for batch EDI (message type - CONTRL) |
BS ISO 9735-5-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据安全规范(源的真实性、完整性和对 |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)) |
BS ISO 9735-6-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据安全规范(安全真实性与确认电文AUTACK) |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Secure authentication and acknowledgement message (message type AUTACK) |
BS ISO 9735-7-2002 |
行政、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).成批EDI的安全原则(机密) |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Security rules for batch EDI (confidentiality) |
BS ISO 9735-8-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.与电子数据交换相关的电文 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Associated data in EDI |
BS ISO 9735-9-2002 |
管理、商业和运输业用电子数据交换(EDIFACT).应用级语法规则.批式电子数据安全规范.安全密钥与证书管理电文(电文类型KEYMAN) |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules - Security key and certificate management message (message type KEYMAN) |
BS ISO 9736-2001 |
飞行器控制金属丝绳用耐腐蚀钢制螺纹有眼端.尺寸和荷载 |
Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope - Dimensions and loads |
BS ISO 9737-2001 |
飞行操纵金属丝绳用耐腐蚀钢制锻接有眼端.尺寸及荷载 |
Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope - Dimensions and loads |
BS ISO 9738-2001 |
飞行器控制金属丝绳用转筒.尺寸和荷载 |
Turnbarrels, for aircraft control wire rope - Dimensions and loads |
BS ISO 974-2000 |
塑料.测定冲击的脆性温度 |
Plastics - Determination of the brittleness temperature by impact |
BS ISO 9747-2001 |
飞行器控制金属丝绳用模压耐腐蚀钢制双柄球端.尺寸和荷载 |
Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
BS ISO 9748-2001 |
飞行器控制金属丝绳用模压耐腐蚀钢制球端.尺寸和荷载 |
Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
BS ISO 9749-2001 |
飞行器控制金属丝绳用模压耐腐蚀钢制螺柱端.尺寸和荷载 |
Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
BS ISO 9757-2001 |
飞行器控制金属丝绳转筒用耐腐蚀钢制螺纹叉端.尺寸和荷载 |
Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads |
BS ISO 9758-2001 |
飞行操纵金属丝绳用滚动轴承的耐腐蚀钢制加螺纹叉形杆端.尺寸及荷载 |
Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads |
BS ISO 9759-2001 |
飞行操纵金属丝绳用耐腐蚀钢制锻接叉形杆端.尺寸及荷载 |
Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
BS ISO 9760-2001 |
航空航天.飞行操纵金属丝绳用滚动轴承的耐腐蚀钢制锻接叉形杆端.尺寸及荷载 |
Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
BS ISO 9761-2001 |
飞行器控制金属丝绳松紧螺纹扣用耐腐蚀钢制锁紧卡箍.尺寸 |
Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles - Dimensions |
BS ISO 9762-2001 |
飞行操纵金属丝绳组件.尺寸和端配件组合 |
Aircraft control wire rope assemblies - Dimensions and end-fitting combinations |
BS ISO 9772-2001 |
泡沫塑料.需用小火焰的小试样的水平燃烧特性的测定 |
Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame |
BS ISO 98-2001 |
纺织机械和附件.纺前预处理机械和纺纱机械.上部卷轴的包纱性能 |
Textile machinery and accessories - Spinning preparatory and spinning machinery - Main dimensions of coverings for top rollers |
BS ISO 9802-1997 |
原光学玻璃.词汇 |
Raw optical glass - Vocabulary |
BS ISO 9815-2003 |
道路车辆.乘用车和挂车列车.横向稳定性试验 |
(Road vehicles - Passenger-car and trailer combinations - Lateral stability test) |
BS ISO 9825-2005 |
水文测量.大河和洪水流量的野外测量 |
|
BS ISO 9831-1998 |
饲料、动物产品和粪便或尿液.总热值测定.弹式热量计法 |
(Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method) |
BS ISO 9838-1993 |
高山雪撬紧固.雪橇紧固试验用试验底板 |
(Alpine ski-bindings - Test soles for ski-binding tests) |
BS ISO 9843-2002 |
柏木油.中国植物 |
(Oil of cedarwood, Chinese type (Cupressus funebris, Endlicher)) |
BS ISO 9848-2004 |
摄影.源文件缩微胶片.ISO感光速度和ISO平均梯度的测定 |
|
BS ISO 9849-2001 |
光学和光学仪器.大地测量和测绘仪器.词汇 |
Optics and optical instruments - Geodetic and surveying instruments - Vocabulary |
BS ISO 9897-1998 |
货运集装箱.集装箱设备数据交换(CECEX).一般通信代码 |
Freight containers - Container equipment data exchange (CEDEX) - General communication codes |
BS ISO 9898-2003 |
作物保护设备.丛生灌木和乔木用空气助动喷雾器试验方法 |
(Equipment for crop protection - Test methods for air-assisted sprayers for bush and tree crops) |
BS ISO 9903-1-2003 |
纺织机械和附件.梳理机的金属针布用异型钢丝的主要尺寸.无互联锁或链接的底边 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot without interlocking or interchaining) |
BS ISO 9903-1993 |
纺织机械和附件.梳理机金属针布用铁丝 |
Textile machinery and accessories - Wires for metallic card clothing |
BS ISO 9903-2-2003 |
纺织机械和附件.梳理机的金属针布用异型钢丝的主要尺寸.有互链接的底边 |
(Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Foot with interchaining) |
BS ISO 9912-1-2005 |
农业灌溉设备.微灌溉用过滤器.术语、定义和分类 |
|
BS ISO 9920-1995 |
热环境的人类工效学.服装热绝缘和热蒸发评估 |
Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble |
BS ISO 9921-1-1997 |
语言通信的人类工效学评定.第1部分:在接通话中(用谈话语言干扰级别法)有标准听话能力人的谈话语言干扰级别和通话距离的测定 |
Ergonomic assessment of speech communication - Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method) |
BS ISO 9923-1994 |
缩微品.A6缩微平片.影像设备 |
Micrographics - Transparent A6 microfiche - Image arrangements |
BS ISO 9924-1-2001 |
橡胶和橡胶制品.利用热重分析法测定硫化和未硫化化合物的成分.丁二烯、乙烯-丙烯共聚物和三共聚物、异丁 |
(Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, is) |
BS ISO 9924-2-2000 |
橡胶和橡胶制品.利用热重分析法测定硫化和未硫化化合物的成分.丙烯晴丁二烯和丁基卤橡胶 |
Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Acrylonitrile-butadiene and halobutyl rubbers |
BS ISO 9947-1994 |
纺织机械和附件.二合一捻线机.词汇 |
Textile machinery and accessories - Two-for-one twisters - Vocabulary |
BS ISO 9981-1999 |
皮带传动.汽车工业用皮带轮和V型肋带.PK轮廓:尺寸 |
Belt drives - Pulleys and V-ribbed belts for the automotive industry - PK profile:dimensions |
BS ISO 9982-1998 |
皮带传动.工业用皮带轮和涌带肋皮带.PH、PJ、PK、PL和PM型材.尺寸 |
Belt drives - Pulleys and V-ribbed belts for industrial applications - PH, PJ, PK, PL and PM profiles - Dimensions |
BS ISO 9988-1-1999 |
塑料.聚甲醛模塑料和挤塑料.第1部分:名称体系与规格主要成分 |
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Designation system and basis for specifications |
BS ISO 9988-1-2004 |
塑料.聚甲醛模塑和挤塑材料.命名体系和基本规范 |
|
BS ISO 9988-2-2002 |
塑料.聚甲醛模塑和挤塑材料.试样的制备和性能测定 |
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Preparation of test specimens and determination of properties |
BS ISO 999-1997 |
信息和文献.索引的内容、结构和介绍指南 |
Information and documentation - Guidelines for the content, organization and presentation of indexes |
BS ISO TR 10064-1-1997 |
圆柱齿轮.检验实施标准.齿轮齿对应面的检验 |
Cylindrical gears - Code of inspection practice - Inspection of corresponding flanks of gear teeth |
BS ISO TR 10064-2-1997 |
圆柱齿轮.检验实施标准.与径向组合偏差,径向跳动,齿厚和齿隙相关的检验 |
Cylindrical gears - Code of inspection practice - Inspection related to radial composite deviations, runout, tooth thickness and backlash |
BS ISO TR 10064-3-1997 |
圆柱齿轮.检验实施标准.与齿轮坯料,轴心距和轴的平行度相关的推荐值 |
Cylindrical gears - Code of inspection practice - Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
BS ISO TR 10193-1996 |
通用圆形轻型金属容器.一般填装体积和一般直经 |
Round general use light gauge metal containers - Nominal filling volumes and nominal diameters |
BS ISO TR 10194-1996 |
通用非圆形轻型金属容器.一般填装体积和一般截面 |
Non-round general use light gauge metal containers - Nominal filling volumes and nominal cross-sections |
BS ISO TR 10232-1995 |
货物传输用的通用平底托盘.设计比率和工作极限荷载. |
General-purpose flat pallets for through transit of goods - Design rating and maximum working load |
BS ISO TR 10233-1995 |
货物运输用的通用平底托盘.性能要求. |
General purpose flat pallets for through transit of goods - Performance requirements |
BS ISO TR 10495-1998 |
圆柱齿轮.在不固定承载条件下服务寿命的计算.与ISO 6336 一致的圆柱齿轮条件 |
Cylindrical gears - Calculation of service life under variable load - Conditions for cylindrical gears in accordance with ISO 6336 |
BS ISO TR 10828-1998 |
蜗轮.蜗轮外形的几何结构 |
Worm gears - Geometry of worm profiles |
BS ISO TR 10840-1995 |
塑料.着火特性.着火试验的制定和使用导则 |
Plastics - Burning behaviour - Guidance for development and use of fire tests |
BS ISO TR 11255-1996 |
清除碎屑法测定机加工硬切材料的应用性.ISO 513名称和术语的信息补充 |
Applicability of hard cutting materials for machining by chip removal - Information additional to ISO 513 designation |
BS ISO TR 11444-1996 |
托盘架用锯木质量 |
(Quality of sawn wood used for the construction of pallets) |
BS ISO TR 11552-1998 |
激光和相关的激光设备.激光材料-加工机械.性能规范和金属切削基准点 |
Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals |
BS ISO TR 11761-1996 |
薄壁金属容器.顶部开口的圆罐头.根据结构型式对罐头尺寸的分类 |
Light-gauge metal containers - Round open-top cans - Classification of can sizes by construction type |
BS ISO TR 11762-1996 |
薄壁金属容器.用于充气液体产品的顶开圆罐.按结构类型对罐尺寸的分类 |
Light-gauge metal containers - Round open-top cans for liquid products with added gas - Classification of can sizes by construction type |
BS ISO TR 11776-1996 |
轻型金属容器.非圆形顶开口罐.按其一般容量来规定的罐 |
Light gauge metal containers - Non-round open-top cans - Cans defined by their nominal capacities |
BS ISO TR 11925-1-1999 |
对火焰试验的反应.直接撞击火焰的建筑物产品的着火性.着火性指南 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Guidance on ignitability |
BS ISO TR 11974-1998 |
明渠液体流量的测量.电磁流速仪 |
Measurement of liquid flow in open channels - Electromagnetic current meters |
BS ISO TR 11991-1997 |
上部气道的激光器外科手术时气道管理指南 |
Guidance on airway management during laser surgery of upper airway |
BS ISO TR 12764-1998 |
封闭管道中液体流量的测量.在旋转圆截面导管中插入涡流流量计来测量流率 |
Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
BS ISO TR 12767-1998 |
使用压差设备测量流量.偏离于ISO 5167-1给出的操作条件和规范的效果指南 |
Measurement of fluid flow by means of pressure-differential devices - Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1 |
BS ISO TR 12776-1996 |
托盘.薄衬纸加层 |
Pallets - Slip sheets |
BS ISO TR 13928-1995 |
ISO 10755, ISO 10756, ISO 10757, ISO 10758 和 ISO 10759的应用指南 |
(Application guide for ISO 10755, ISO 10756, ISO 10757, ISO 10758 and ISO 10759) |
BS ISO TR 15069-1998 |
系列1货运集装箱.搬运和安全.ISO 3874 附录A的基本原理 |
(Series 1 freight containers - Handling and securing - Rationale for ISO 3874 annex A) |
BS ISO TR 15070-1997 |
系列1货运集装箱.结构试验标准用基本原理 |
(Series 1 freight containers - Rationale for structural test criteria) |
BS ISO TR 15377-1998 |
用压差装置测量流体流量.符合ISO 5167-1规定的喷嘴和节流孔板规范指南 |
(Measurement of fluid flow by means of pressure differential devices - Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1) |
BS ISO TR 3313-1998 |
密封管道中液体流量的测量.脉动流动对流量测量仪器影响的指南 |
(Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments) |
BS ISO TR 5168-1998 |
流体流量的测量.不确定度的评估 |
(Measurement of fluid flow - Evaluation of uncertainties) |
BS ISO TR 5658-1-1998 |
着火试验反应.火焰蔓延.第1部分:火焰蔓延指南 |
(Reaction to fire tests - Spread of flame - Guidance on flame spread) |
BS ISO TR 5925-2-1998 |
防火试验.防烟门和百叶组件.试验数据应用和试验方法的说明 |
(Fire tests - Smoke control door and shutter assemblies - Commentary on test method and test data application) |
BS ISO TR 6809-1997 |
橡胶组分.碳黑.标准参考碳黑 |
(Rubber compounding ingredients - Carbon black - Standard reference blacks) |
BS ISO TR 7066-1-1997 |
流量测量设备的使用和校验不可信度的评定.第1部分:线性校验关系 |
(Assessment of uncertainty in calibration and use of flow measurement devices - Linear calibration relationships) |
BS ISO TR 8363-1998 |
明渠液体流量的测量.方法选择指南 |
(Measurement of liquid flow in open channels - General guidelines for the selection of method) |
BS ISO TR 8610-1996 |
轻型金属容器.装牛奶和牛奶制品用带焊封端口的圆形通气孔罐.容积和相关尺寸 |
(Light gauge metal containers - Round vent-hole cans with soldered ends for milk and milk products - Capacities and related diameters) |
BS ISO TR 9122-2-1996 |
燃烧废物的毒性试验.燃烧废物中吸入毒性测定用生物检定指南(基本原理、准则和方法) |
(Toxicity testing of fire effluents - Guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology) |
BS ISO TR 9122-3-1996 |
燃烧废物的毒性试验.燃烧废气和蒸气的分析方法 |
(Toxicity testing of fire effluents - Methods for the analysis of gases and vapours in fire effluents) |
BS ISO TR 9122-4-1996 |
燃烧废物的毒性试验.燃烧模式(小型试验中使用的燃烧炉和燃烧仪表) |
(Toxicity testing of fire effluents - The fire model (furnaces and combustion apparatus used in small-scale testing)) |
BS ISO TR 9122-5-1996 |
燃烧废物的毒性试验.燃烧废物毒性效应的预测 |
(Toxicity testing of fire effluents - Prediction of toxic effects of fire effluents) |
BS ISO TR 9122-6-1996 |
燃烧废物的毒性试验.在建筑物或运输中发生火灾时评估毒性危害用调节器和分类符的导则 |
(Toxicity testing of fire effluents - Guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport) |
BS ISO TR 9464-1998 |
ISO 5167-1-91的使用指南 |
(Guide to the use of ISO 5167-1:1991) |
BS ISO TR 9547-1993 |
程序语言处理机.试验方法.方法的发展和可接受性导则 |
(Programming language processors - Test methods - Guidelines for their development and acceptability) |
BS ISO TR 9705-2-2001 |
燃烧试验反应.表面产品的全面室内试验.技术背景和指南 |
(Reaction to fire tests - Full scale room tests for surface products - Technical background and guidance) |
BS ISO/CIE 10527-1998 |
CIE 标准色度观测器 |
(CIE standard colorimetric observers) |
BS ISO/IEC 10021-1-1991 |
信息技术.电文通信.电文有关文本交换系统(MOTIS).系统和服务概述 |
(Information technology - Text communication - Message-oriented text interchange systems (MOTIS) - System and service overview) |
BS ISO/IEC 10021-2-1998 |
信息技术.文电处理系统(MHS).整体结构 |
(Information technology - Message handling systems (MHS) - Overall architecture) |
BS ISO/IEC 10021-4-1998 |
信息技术.文电处理系统(MHS).文电传输系统.摘要服务定义和程序 |
(Information technology. Message handling systems (MHS). Message transfer system. Abstract service definition and procedures) |
BS ISO/IEC 10021-5-1996 |
信息技术.文电处理系统(MHS).文电存储.摘要服务定义 |
(Information technology. Message handling systems (MHS). Message store. Abstract service definition) |
BS ISO/IEC 10021-6-1998 |
信息技术.文电处理系统(MHS).协议规范 |
(Information technology. Message handling systems (MHS). Protocol specifications) |
BS ISO/IEC 10021-7-1998 |
信息技术.文电处理系统(MHS).人际文电系统 |
(Information technology. Message handling systems (MHS). Interpersonal messaging system) |
BS ISO/IEC 10021-9-1996 |
信息技术.电文处理系统(MHS).电子数据交换电文通知系统 |
(Information technology. Message handling systems (MHS). Electronic Data Interchange messaging system) |
BS ISO/IEC 10022-1998 |
信息技术.开式系统互连.物理服务定义 |
(Information technology - Open systems interconnection - Physical service definition) |
BS ISO/IEC 10025-2-1997 |
信息技术.系统间远程通信和信息交换.连接方式传输协议的传输一致性测试.第2部分:ISO/IEC 8073-1988在CONS上 |
() |
BS ISO/IEC 10025-3-1994 |
信息技术.系统间电信和信息交换.连网服务系统中连接型传输协议传输合格的试验.传递试验管理协议规范 |
(Information technology - Telecommunications and information exchange between systems - Transport conformance testing for connection-mode transport protocol operating over connection-mode network servi) |
BS ISO/IEC 10026-1-1999 |
信息技术.开放系统互连.分布式交易处理.OSI TP模式 |
(Information technology - Open systems interconnection - Distributed transaction processing - OSI TP model) |
BS ISO/IEC 10026-2-1999 |
信息技术.开放系统互连.分布式交易处理.OSI TP服务 |
(Information technology - Open systems interconnection - Distributed transaction processing - OSI TP service) |
BS ISO/IEC 10026-3-1999 |
信息技术.开放系统互连.分布式交易处理.协议规格 |
(Information technology - Open systems interconnection - Distributed transaction processing - Protocol specification) |
BS ISO/IEC 10026-4-1995 |
信息技术.开放系统互连.分布式事务处理.协议执行一致命题(PICS)形式 |
(Information technology - Open systems interconnection - Distributed transaction processing - Protocol Implementation Conformance Statement (PICS) proforma) |
BS ISO/IEC 10026-5-1999 |
信息技术.开放系统互连.分布式交易处理.使用OSI TP时应用前后关系形式和导则 |
(Information technology - Open systems interconnection - Distributed transaction processing - Application context proforma and guidelines when using OSI TP) |
BS ISO/IEC 10026-6-1995 |
信息技术.开放系统互连.分布式事务处理.非结构数据传输 |
(Information technology - Open systems interconnection - Distributed transaction processing - Unstructured data transfer) |
BS ISO/IEC 10027-1990 |
信息技术.信息源词典系统结构 |
(Information technology - Information Resource Dictionary System (IRDS) framework) |
BS ISO/IEC 10028-1994 |
信息技术.系统间电信和信息交换.中间系统网络层中继功能的定义 |
(Information technology - Telecommunications and information exchange between systems - Definition of the relaying functions of a network layer intermediate system) |