标准号 |
中文名称 |
英文名称 |
BS ISO 14021-1999 |
环境标签和说明.自宣告环境要求(II型环境标签) |
Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling) |
BS ISO 14024-1999 |
环境标签和声明:I型环境标签.规则和过程 |
Environmental labels and declarations. Type I environmental labelling. Principles and procedures |
BS ISO 14050-1998 |
环境管理.词汇 |
Environmental management - Vocabulary |
BS ISO 14135-1-2005 |
光学及光学仪器.望远镜瞄准具规范.通用仪器 |
|
BS ISO 14135-2-2005 |
光学及光学仪器.望远镜瞄准具规范.高性能仪器 |
|
BS ISO 14137-2000 |
机床.金属线放电加工机床的试验条件.术语和准确度试验 |
Machine tools - Test conditions for wire electrical-discharge machines (wire EDM) - Terminology and testing of the accuracy |
BS ISO 14139-2000 |
比重测定.利用设备测量明渠流量.复合测量设备 |
Hydrometric determinations - Flow measurements in open channels using structures - Compound gauging structures |
BS ISO 14152-2002 |
中子辐射防护屏蔽.选择适用材料用的设计原则和考虑 |
Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials |
BS ISO 14154-2005 |
土质.一些选定的氯苯酚的测定.电子俘获检测的气相色谱法 |
|
BS ISO 14156-2001 |
奶及奶制品.脂类和脂溶性化合物的萃取方法 |
Milk and milk products - Extraction methods for lipids and liposoluble compounds |
BS ISO 14164-1999 |
稳定源排放.管道中气流容积流量比率测定.自动配置方法 |
Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method |
BS ISO 14168-2003 |
硬金属除外的金属粉末.铜基渗透粉末的试验方法 |
Metallic powders, excluding hardmetals - Method for testing copper-base infiltrating powders |
BS ISO 14180-1998 |
固体矿物燃料.煤层取样指南 |
Solid mineral fuels - Guidance on the sampling of coal seams |
BS ISO 14224-1999 |
石油和天然气工业.设备可靠性和维护数据的收集和交换 |
Petroleum and natural gas industries - Collection and exchange of reliability and maintenance data for equipment |
BS ISO 14237-2000 |
表面化学分析.次级离子质谱法.使用非均一掺杂材料的硅中硼原子的浓度测定 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials) |
BS ISO 14242-1-2002 |
外科植入物.髋关节假肢的总磨损.磨损的负荷和位移参数.试验用试验机和相应环境条件 |
(Implants for surgery - Wear of total hip joint prostheses - Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test) |
BS ISO 14242-2-2000 |
外科植入物.髋关节假肢的磨损.测量方法 |
(Implants for surgery - Wear of total hip joint prostheses - Methods of measurement) |
BS ISO 14243-1-2002 |
外科植入物.膝关节假肢的总磨损.试验用有负荷控制和相应控制条件的磨损试验机的负荷和位移参数 |
(Implants for surgery - Wear of total knee joint prostheses - Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test) |
BS ISO 14243-2-2000 |
外科植入物.膝关节假肢的磨损.测量方法 |
Implants for surgery - Wear of total knee joint prostheses - Methods of measurement |
BS ISO 14258-1998 |
工业自动化系统.企业模式概念和规则 |
Industrial automation systems - Concepts and rules for enterprise models |
BS ISO 14269-1-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.词汇 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Vocabulary |
BS ISO 14269-2-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.加热、通风和空调试验方法和性能 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Heating, ventilating and air-conditioning test method and performance |
BS ISO 14269-3-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.太阳能加热效果测定 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Determination of effect of solar heating |
BS ISO 14269-4-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.空气过滤件试验方法 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Air filter element test method |
BS ISO 14269-5-1998 |
农业和林业用拖拉机和自驱动机械.驾驶室环境.增压系统试验方法 |
Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment - Pressurization system test method |
BS ISO 14275-2002 |
航空航天.内设十字形条纹驱动器.试验方法 |
Aerospace - Drives, internal, offset cruciform, ribbed - Metric series |
BS ISO 14276-2002 |
航空航天.内偏距十字交叉驱动器.米制系列 |
Aerospace - Drives, internal, offset cruciform - Metric series |
BS ISO 14277-2002 |
航空航天.内偏置十字槽或无槽扳动的扳手.米制系列 |
Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series |
BS ISO 14278-2002 |
航空航天.内偏置十字槽或无槽的量规.米制系列 |
Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series |
BS ISO 14279-2002 |
航空航天.内十字槽扳手.米制系列 |
Aerospace - Drives, internal, cruciform - Metric series |
BS ISO 14280-2002 |
航空航天.内十字槽或无槽扳动的扳手.米制系列 |
Aerospace - Drivers, ribbed, for internal cruciform ribbed or unribbed drives - Metric series |
BS ISO 14281-2002 |
航空航天.内十字槽或无槽的量规.米制系列 |
Aerospace - Gauges, for internal cruciform ribbed or unribbed drives - Metric series |
BS ISO 14300-2-2002 |
航空航天系列.程序管理.产品保证程序 |
Space systems - Programme management - Product assurance |
BS ISO 14302-2003 |
航空航天系列.航天系统.电磁兼容性要求 |
(Aerospace series - Space systems - Electromagnetic compatibility requirements) |
BS ISO 14303-2002 |
空间系统.控制客车对航天器的接口 |
Space systems - Launch-vehicle-to-spacecraft interfaces |
BS ISO 1431-1-2004 |
硫化橡胶或热塑性橡胶.耐臭氧龟裂性.静态和动态应变试验 |
|
BS ISO 1431-3-2000 |
橡胶,硫化橡胶或热塑橡胶.耐臭氧龟裂性.实验室测定臭氧浓度的基准和交替方法 |
Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
BS ISO 14315-1998 |
工业金属丝网筛规范 |
Specification for industrial wire screens |
BS ISO 1434-1996 |
包装的天然橡胶.包装层上胶量的测定 |
Natural rubber in bales - Amount of bale coating - Determination |
BS ISO 14368-1-2001 |
无机和青玉表面玻璃.尺寸和公差 |
Mineral and sapphire watch-glasses - Dimensions and tolerances |
BS ISO 14368-2-2003 |
无机和蓝宝石表面玻璃.用粘着剂或衬垫组装外壳 |
Mineral and sapphire watch-glasses - Assembly to the case by adhesive or using a gasket |
BS ISO 14368-3-2003 |
无机和蓝宝石表玻璃.质量标准和试验方法 |
(Mineral and sapphire watch-glasses - Qualitative criteria and test methods) |
BS ISO 14377-2002 |
罐装脱脂牛奶.锡含量测定.使用石墨炉原子吸收光谱测量方法 |
Canned evaporated milk - Determination of tin content - Method using graphite furnace atomic absorption spectrometry |
BS ISO 14378-2000 |
奶和干奶粉.用高性能液相色谱法测定碘化物含量 |
Milk and dried milk - Determination of iodide content - Method using high performance liquid chromatography |
BS ISO 14396-2002 |
往复式内燃机.测定内燃机功率的测定和试验方法.与ISO 8178协调的废弃排放试验 |
Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
BS ISO 14397-1-2002 |
土方机械.装载机和挖掘机.验证计算倾卸载荷用的额定工作量的计算和试验方法 |
Earth-moving machinery - Loaders and backhoe loaders - Calculation of rated operating capacity and test method for verifying calculated tipping load |
BS ISO 14397-2-2002 |
土方机械.装载机和挖掘机.计算最大提升高度的爆发力和提升能力的试验方法 |
Earth-moving machinery - Loaders and backhoe loaders - Test method for measuring breakout forces and lift capacity to maximum lift height |
BS ISO 14401-2-2004 |
土方机械.观察的视野及后视镜视野.性能标准 |
|
BS ISO 14401-2-2004 |
土方机械.观察的视野及后视镜视野.性能标准 |
|
BS ISO 14408-1998 |
激光外科用气管管子的设计.标记及其附属信息的要求 |
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information |
BS ISO 14416-2003 |
信息和文献工作.归档和图书馆用图书、期刊、丛书和其他纸型文献的装订要求.方法和材料 |
(Information and documentation - Requirements for binding of books, periodicals, serials and other paper documents for archive and library use - Methods and materials) |
BS ISO 14420-2005 |
铝生产用含碳产品.焙烧阳极和成形碳产品.线性热膨胀系数的测定 |
|
BS ISO 14428-2005 |
铝生产用含碳材料.冷和微温冲压浆料.烘烤时的膨胀/收缩 |
|
BS ISO 14461-1-2005 |
奶和奶制品.微生物实验室内质量控制.菌落计数用分析性能评定 |
|
BS ISO 14461-2-2005 |
乳和乳制品.微生物实验室内质量控制.平行板和后续稀释步骤的菌落计数可靠性测定 |
|
BS ISO 14487-1997 |
纸浆.物理试验用标准水 |
Pulps - Standard water for physical testing |
BS ISO 14490-3-2005 |
光学及光学仪器.望远镜系统的试验方法.望远镜瞄准具的试验方法 |
|
BS ISO 14500-2003 |
纺织机械和附件.提花编织机用通丝.词汇 |
(Textile machinery and accessories - Harnesses for Jacquard weaving machines - Vocabulary) |
BS ISO 14502-1-2005 |
绿茶和红茶的物质特性测定.茶中多酚的总含量.使用Folin-Ciocalteu试剂的比色法 |
|
BS ISO 14502-2-2005 |
绿茶和红茶的物质特性测定.绿茶中儿茶酚含量.高效液相色谱法 |
|
BS ISO 14507-2003 |
土质.有机污物测定用样品的预处理 |
(Soil quality - Pretreatment of samples for determination of organic contaminants) |
BS ISO 14508-1997 |
道路车辆.火花塞.电极 |
Road vehicles - Spark plugs - Terminals |
BS ISO 14511-2002 |
密封管道中流体流量测量.热质量流量计 |
Measurement of fluid flow in closed conduits - Thermal mass flowmeters |
BS ISO 14512-2000 |
客用车.具有裂口摩擦系数的正向前方地面制动系统.开环试验方法 |
Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
BS ISO 14520-1-2001 |
气体灭火系统.物理特性和系统设计.一般要求 |
Gaseous fire-extinguishing systems - Physical properties and system design - General requirements |
BS ISO 14520-10-2001 |
气体灭火系统.物理特性和系统设计.HFC 23灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - HFC 23 extinguishant |
BS ISO 14520-11-2001 |
气体灭火系统.物理特性和系统设计.HFC 236fa灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - HFC 236fa extinguishant |
BS ISO 14520-12-2001 |
气体灭火系统.物理特性和系统设计.IG-01灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - IG-01 extinguishant |
BS ISO 14520-13-2001 |
气体灭火系统.物理特性和系统设计.IG-100灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - IG-100 extinguishant |
BS ISO 14520-14-2001 |
气体灭火系统.物理特性和系统设计.IG-55灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - IG-55 extinguishant |
BS ISO 14520-15-2001 |
气体灭火系统.物理特性和系统设计.IG-541灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - IG-541 extinguishant |
BS ISO 14520-2-2001 |
气体灭火系统.物理特性和系统设计.CFI灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - CFDOWN3I extinguishant |
BS ISO 14520-3-2001 |
气体灭火系统.物理特性和系统设计.FC-2-1-8灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - FC-2-1-8 extinguishant |
BS ISO 14520-4-2001 |
气体灭火系统.物理特性和系统设计.FC-3-1-10灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - FC-3-1-10 extinguishant |
BS ISO 14520-6-2001 |
气体灭火系统.物理特性和系统设计.HCFC混合A的灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - HCFC Blend A extinguishant |
BS ISO 14520-7-2001 |
气体灭火系统.物理特性和系统设计.HCFC混合124的灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - HCFC Blend 124 extinguishant |
BS ISO 14520-8-2001 |
气体灭火系统.物理特性和系统设计.HCFC 125灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - HCFC 125 extinguishant |
BS ISO 14520-9-2001 |
气体灭火系统.物理特性和系统设计.HFC 227ea灭火剂 |
Gaseous fire-extinguishing systems - Physical properties and system design - HFC 227ea extinguishant |
BS ISO 14524-2000 |
摄影.电子静止图像照相机.测量光电子转换功能方法 |
Photography - Electronic still-picture cameras - Methods for measuring opto-electronic conversion functions (OECFs) |
BS ISO 14531-1-2003 |
塑料管道和配件.气体燃料运输用交联聚乙烯(PE-X)管道系统.米制系列.管规范 |
(Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Pipes) |
BS ISO 14532-2001 |
天然气,词汇 |
Natural gas - Vocabulary |
BS ISO 14535-2001 |
摄影.电子扫描仪、成像胶片和胶卷的室光负载包装件.尺寸和有关要求 |
Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements |
BS ISO 14546-2001 |
摄影.航空胶片和卷轴.尺寸 |
Photography - Aerial films and spools - Dimensions |
BS ISO 14558-2000 |
橡胶.红外光谱法测定加氢丁腈橡胶(HNBR)的残余不饱和度 |
Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy |
BS ISO 1456-2003 |
金属镀层.镍加铬的电镀层和铜加镍再加铬的电镀层 |
Metallic coatings - Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium |
BS ISO 14560-2004 |
根据属性验收抽样程序.每百万非合格样品中规定的质量等级 |
|
BS ISO 14592-1-2003 |
水质.评价低浓度有机化合物有氧生物降解能力.地表水或地表水/悬浮质泥沙摇瓶试验 |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds at low concentrations - Shake-flask batch test with surface water or surface water/sediment suspensions) |
BS ISO 14592-2-2003 |
水质.评价低浓度有机化合物有氧生物降解能力.附有生物量的连续流动河床模型 |
(Water quality - Evaluation of the aerobic biodegradability of organic compounds at low concentrations - Continuous flow river model with attached biomass) |
BS ISO 14594-2004 |
微电子束分析.电子探测微观分析.波长色散光谱学用实验参数的测定指南 |
|
BS ISO 14595-2004 |
微光束分析.电子探测微量分析.合格的参考物质的规范指南 |
|
BS ISO 14606-2001 |
表面化学分析.溅射深度剖面测定.作为参考材料的层系统最优化 |
(Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials) |
BS ISO 14612-2004 |
船舶和海上技术.船桥布置和相关设备.船桥的集中和综合功能的要求和指南 |
|
BS ISO 14612-2004 |
船舶和海上技术.船桥布置和相关设备.集中和集成桥功能的要求和指南 |
|
BS ISO 14615-1998 |
粘结剂.结构粘结接头的耐久性.有荷载并暴露在湿度和温度之下 |
(Adhesives - Durability of structural adhesive joints - Exposure to humidity and temperature under load) |
BS ISO 14616-1997 |
塑料制品.聚乙烯、乙烯共聚物及其混合物的可热收缩膜.收缩应变和收缩应力的测定 |
(Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of the shrinkage stress and contraction stress) |
BS ISO 14617-1-2004 |
图示的图形符号.一般信息和索引 |
|
BS ISO 14617-10-2004 |
图示的图形符号.液压变流器 |
|
BS ISO 14617-11-2004 |
图示的图形符号.热转换和热电动机设备 |
|
BS ISO 14617-11-2004 |
图示的图形符号.热转换和热电动机设备 |
|
BS ISO 14617-12-2004 |
图示的图形符号.分离、提纯和混合设备 |
|
BS ISO 14617-2-2004 |
图示的图形符号.一般应用的符号 |
|
BS ISO 14617-3-2004 |
图示的图形符号.连接和相关设备 |
|
BS ISO 14617-3-2004 |
图示的图形符号.连接和相关设备 |
|
BS ISO 14617-4-2004 |
图示的图形符号.传动器和相关设备 |
|
BS ISO 14617-4-2004 |
图示的图形符号.传动器和相关设备 |
|
BS ISO 14617-5-2004 |
图示的图形符号.测量和控制设备 |
|
BS ISO 14617-5-2004 |
图示的图形符号.测量和控制设备 |
|
BS ISO 14617-6-2004 |
图示的图形符号.测量和控制功能 |
|
BS ISO 14617-7-2004 |
图示的图形符号.基本机械组件 |
|
BS ISO 14617-8-2004 |
图示的图形符号.阀门和气流调节器 |
|
BS ISO 14617-9-2004 |
图示的图形符号.泵、压缩机和风扇 |
|
BS ISO 14619-2004 |
航天系统.航天试验.一般要求 |
|
BS ISO 14621-2-2004 |
航天系统.电气、电子和机电部件.控制程序要求 |
|
BS ISO 14623-2004 |
航天系统.压力容器和压力构件.设计和操作 |
|
BS ISO 14624-2-2004 |
航天系统.材料的安全和兼容性.电线绝缘和附属材料易燃性的测定 |
|
BS ISO 14624-4-2004 |
航天系统.材料的安全和兼容性.加压气态氧或富氧环境下材料向上易燃性的测定 |
|
BS ISO 14635-1-2000 |
齿轮.FZG试验规程.有关齿轮咬接油的载重量的FZG试验方法A/8、3/90 |
(Gears - FZG test procedures - FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils) |
BS ISO 14637-2004 |
乳.脲含量测定.利用pH差异的酵催化方法(参照法) |
|
BS ISO 14647-2000 |
金属覆层.金属基质金覆层孔隙率的测定.硝酸蒸发试验 |
(Metallic coatings - Determination of porosity on gold coatings on metallic substrates - Nitric acid vapour test) |
BS ISO 14648-1-2002 |
显微摄影.使用单独的内部显示系统的产生图像的COM记录装置的质量控制.软件测试目标的特征 |
(Micrographics - Quality control of COM recorders that generate images using a single internal display system - Characteristics of the software test target) |