标准号 |
中文名称 |
英文名称 |
ISO 7270-1987 |
橡胶.聚合物(单聚合物和掺和物)的识别.热解气相色谱法 |
Rubber; Identification of polymers (single polymers and blends); Pyrolytic gas chromatographic method |
ISO 7271-1982 |
铝和铝合金.箔材和薄带材尺寸公差 |
Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances |
ISO 7273-1981 |
锻铝和铝合金.挤压圆型材.形状和尺寸公差 |
Wrought aluminium and aluminium alloys; Extruded round bars; Tolerances on shape and dimensions |
ISO 7274-1981 |
锻铝和铝合金.冷拔圆棒材.形状和尺寸公差(直径的负公差) |
Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions (All minus tolerances on diameter) |
ISO 7275-1985 |
文献工作.连续期刊的书目情报介绍 |
Documentation; Presentation of title information of series |
ISO 7278-1-1987 |
液态烃.动态测量.容积式流量计试验系统.第1部分:一般原理 |
Liquid hydrocarbons; Dynamic measurement; Proving systems for volumetric meters; Part 1 : General principles |
ISO 7278-1-1987 |
液态烃.动态测量.容积式流量计试验系统.第1部分:一般原理 |
Liquid hydrocarbons; Dynamic measurement; Proving systems for volumetric meters; Part 1 : General principles |
ISO 7278-2-1988 |
液态烃.动态测量.容量计用验证系统.第2部分:管式校准仪 |
Liquid hydrocarbons; dynamic measurement; proving systems for volumetric meters; part 2: pipe provers |
ISO 7278-3-1998 |
液态烃.动态测量.容积式流量计试验系统.第3部分:脉冲内插技术 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 3: Pulse interpolation techniques |
ISO 7278-4-1999 |
液态烃.动态测量.容积式流量计试验系统.第4部分:管道验证操作者指南 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers |
ISO 7279-1984 |
压力管聚丙烯(PP)配件.热熔接的管接口.米制系列.接口尺寸 |
Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series; Dimensions of sockets |
ISO 728-1995 |
焦炭(标称最大粒径大于20mm).用筛选法进行粒度分析 |
Coke (nominal top size greater than 20 mm) - Size analysis by sieving |
ISO 7284-1993 |
电阻焊设备.汽车工业用多点点焊的两个单独副线圈的变压器详细规范 |
Resistance welding equipment; particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry |
ISO 7285-1995 |
机械化多点焊接气汽缸 |
Pneumatic cylinders for mechanized multiple spot welding |
ISO 7286-1986 |
电阻焊接设备的图形符号.两种语言版 |
Graphical symbols for resistance welding equipment Bilingual edition |
ISO 7287-2002 |
热切割设备用图形符号 |
Graphical symbols for thermal cutting equipment |
ISO 7289-1996 |
气焊、切削及有关加工的断路阀用快速连接器 |
Quick-action couplings with shut-off valves for gas welding, cutting and allied processes |
ISO 729-1988 |
含油种子.油的酸度测定 |
Oilseeds; determination of acidity of oils |
ISO 7291-1999 |
气焊设备.小于等于300bar的焊接、切削及相关工艺用多头管系用压力调节器 |
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar |
ISO 7292-1997 |
焊接、切割和连接工艺用流量计调节器.分类和规范 |
Flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification and specifications |
ISO 7293-1997 |
林业机械.手提式链锯.发动机性能和燃料消耗 |
Forestry machinery - Portable chain-saws - Engine performance and fuel consumption |
ISO 7294-1983 |
木工锯的锯齿.锯齿齿形.术语和表示方法.两种语言版 |
Saw teeth for woodworking saws; Profile shape; Terminology and designation Bilingual edition |
ISO 7294-1983 |
木工锯的锯齿.锯齿齿形.术语和表示方法.两种语言版 |
Saw teeth for woodworking saws; Profile shape; Terminology and designation Bilingual edition |
ISO 7295-1988 |
飞机轮胎气门嘴.互换性尺寸 |
Tyre valves for aircraft; interchangeability dimensions |
ISO 7296-1 AMD 1-1996 |
起重机.图形符号.第1部分:总则.修改件1 |
Cranes - Graphic symbols - Part 1: General; Amendment 1 |
ISO 7296-1-1991 |
起重机.图形符号.第1部分:总则 |
Cranes; graphic symbols; part 1: general |
ISO 7296-2-1996 |
起重机.图形符号.第2部分:移动式起重机 |
Cranes - Graphical symbols - Part 2: Mobile cranes |
ISO 7297-1985 |
信息处理.数据存储装置的磁盘.外径200mm(7.9in)、内径63.5mm(2.5in)磁盘的每列磁道的96000次磁通变换 |
Information processing; Magnetic disk for data storage devices; 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter |
ISO 7298-1985 |
信息处理.数据存储装置的磁盘.外径210mm(8.3in)、内径100mm(3.9in)磁盘的每列磁道的158000次磁通变换 |
Information processing; Magnetic disk for data storage devices; 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter |
ISO 7299-1996 |
柴油发动机.燃油喷射泵端面装配的法兰盘 |
Diesel engines - End-mounting flanges for fuel injection pumps |
ISO 730-1 Technical Corrigendum 1-1995 |
农业轮式拖拉机.三点悬挂装置.第1部分:1类,2类和3类.技术勘误表1 |
Agricultural wheeled tractors - Rear-mounted three-point linkage - Part 1: Categories 1, 2, 3 and 4; Technical Corrigendum 1 |
ISO 730-1-1994 |
农业轮式拖拉机.三点悬挂装置.第1部分:1类,2类,3类和4类 |
Agricultural wheeled tractors - Rear-mounted three-point linkage - Part 1: Categories 1, 2, 3 and 4 |
ISO 730-2-1979 |
农业轮式拖拉机.三点悬挂装置.第2部分:类型IN(窄型悬挂) |
Agricultural wheeled tractors; Three-point linkage; Part 2 : Category 1 N (Narrow hitch) |
ISO 7301-2002 |
稻谷.规范 |
Rice - Specification |
ISO 7302-1982 |
谷类和谷类制品.脂肪总含量的测定 |
Cereals and cereal products; Determination of total fat content |
ISO 7304-1985 |
硬粒小麦粗面粉和营养糊.由感官分析评定通心粉的烹调质量 |
Durum wheat semolinas and alimentary pasta; Estimation of cooking quality of spaghetti by sensory analysis |
ISO 7305-1998 |
碾碎谷类.脂肪酸的测定 |
Milled cereal products - Determination of fat acidity |
ISO 7308-1987 |
道路车辆.储能液压制动用的石油基制动液 |
Road vehicles; Petroleum-based brake-fluid for stored-energy hydraulic brakes |
ISO 7309-1985 |
道路车辆.液压制动系统.ISO石油基标准液 |
Road vehicles; Hydraulic braking systems; ISO reference petroleum base fluid |
ISO 731-1-1977 |
工业用甲酸.试验方法.第1部分:总则 |
Formic acid for industrial use; Methods of test; Part I : General |
ISO 731-2-1977 |
工业用甲酸.试验方法.第2部分:总酸度的测定.滴定法 |
Formic acid for industrial use; Methods of test; Part II : Determination of total acidity; Titrimetric method |
ISO 731-3-1977 |
工业用甲酸.试验方法.第3部分:其他酸含量的测定.电位滴定法 |
Formic acid for industrial use; Methods of test; Part III : Determination of content of other acids; Potentiometric method |
ISO 731-4-1977 |
工业用甲酸.试验方法.第4部分:无机氯化物目测限度试验 |
Formic acid for industrial use; Methods of test; Part IV : Visual limit test for inorganic chlorides |
ISO 731-5-1977 |
工业用甲酸.试验方法.第5部分:无机硫酸盐目测限度试验 |
Formic acid for industrial use; Methods of test; Part V : Visual limit test for inorganic sulphates |
ISO 731-6-1977 |
工业用甲酸.试验方法.第6部分:铁含量的测定.2,2`-联吡啉光度法 |
Formic acid for industrial use; Methods of test; Part VI : Determination of iron content; 2,2`- Bipyridyl photometric method |
ISO 731-7-1977 |
工业用甲酸.试验方法.第7部分:其他挥发性酸低含量的测定.蒸馏后滴定法 |
Formic acid for industrial use; methods of test; Part VII : Determination of low contents of other volatile acids; Titrimetric method after distillation |
ISO 7310-1993 |
柴油发动机.有水平法兰盘的旋转式燃油滤清器顶盖.装配和连接尺寸 |
Diesel engines; heads for spin-on fuel filters with horizontal flange; mounting and connecting dimensions |
ISO 7311-1993 |
柴油发动机.有垂直法兰盘的旋转式燃油滤清器顶盖.装配和连接尺寸 |
Diesel engines; heads for fuel filters with vertical flange; mounting and connecting dimensions |
ISO 7312-1984 |
道路车辆.空气过滤器连接.A型和B型 |
Road vehicles; Air filter connections; Types A and B |
ISO 7313-1984 |
飞机.聚四氟乙烯(PTFE)制的高温盘曲软管装置 |
Aircraft; High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
ISO 7314-2002 |
航空航天.液压系统.金属软管组件 |
Aerospace - Fluid systems - Metal hose assemblies |
ISO 7315-1988 |
航空航天.流体动力管道安装用的P”形夹(环状夹).尺寸 |
Aerospace; P clamps (loop clamps) for fluid systems; envelope dimensions |
ISO 7319-1992 |
航空航天.流体动力系统.24度锥形连接器接口 |
Aerospace; fluid systems; interface of 24 cone metric couplings |
ISO 732-2000 |
摄影技术.120和220尺寸的胶片.尺寸 |
Photography - 120-size and 220-size films - Dimensions |
ISO 7320-1992 |
航空航天.流体系统螺纹联接器和密封连接器.尺寸 |
Aerospace; couplings, threaded and sealed, for fluid systems; dimensions |
ISO 7322-2000 |
复合软木.试验方法 |
Composition cork - Test methods |
ISO 7323 Technical Corrigendum 1-2003 |
生橡胶和非硫化混合的橡胶.可塑值和回收值的测定.平行板法.技术勘误1 |
Rubber, raw and unvulcanized compounded - Determination of plasticity number and recovery number - Parallel plate method; Technical Corrigendum 1 |
ISO 7323 Technical Corrigendum 1-2003 |
生橡胶和非硫化混合的橡胶.可塑值和回收值的测定.平行板法.技术勘误1 |
|
ISO 7323-1985 |
非硫化混合的生胶.可塑值和回收值的测定.平行板法 |
Rubber, raw and unvulcanized compounded; Determination of plasticity number and recovery number; Parallel plate method |
ISO 7323-1985 |
非硫化混合的生胶.可塑值和回收值的测定.平行板法 |
Rubber, raw and unvulcanized compounded; Determination of plasticity number and recovery number; Parallel plate method |
ISO 7326-1991 |
橡胶和塑料软管.静态条件下的耐臭氧性试验的评定 |
Rubber and plastics hoses; assessment of ozone resistance under static conditions |
ISO 7327-1994 |
塑料.环氧树脂用固化剂和催化剂.酸酐中游离酸测定 |
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride |
ISO 7328-1999 |
以奶为基料的食用冰制品和冰配制食品.脂肪含量的测定.重量分析法(参比法) |
Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) |
ISO 7329-1989 |
摄影技术.幻灯放映机.用玻璃夹层试片对图象区温升的测定 |
Photography; slide projectors; determination of temperature rise in the picture area using a glass sandwich test slide |
ISO 7331-1990 |
高山滑雪杆.安全要求和试验方法 |
Ski-poles for alpine skiing; safety requirements and test methods |
ISO 7332-1998 |
航空航天.沉孔浮动式MJ螺纹双耳缩径系列自锁螺母.等级:1100MPa(室温)/235℃、1100MPa(室温)/315℃和1100MPa(室温)/425℃.尺寸 |
Aerospace - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 C, 1100 MPa (at ambient temperature)/315 C and 1100 MPa (at ambient temperature)/425 C - D |
ISO 7335-1987 |
铁矿石.化合水含量的测定.卡尔费舍尔(Karl Fesher)滴定法 |
Iron ores; Determination of combined water content; Karl Fischer titrimetric method |
ISO 7336-1984 |
石棉水泥管道.液力计算导则 |
Asbestos-cement pipelines; Guidelines for hydraulic calculation |
ISO 7337-1984 |
石棉增强水泥制品.现场工作实践导则 |
Asbestos reinforced cement products; Guidelines for on-site work practices |
ISO 734-1-1998 |
油料种子残渣.油含量测定.第1部分:己烷(或石油醚)萃取法 |
Oilseed residues - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum) |
ISO 734-2-1998 |
油料种子残渣.油含量测定.第2部分:快速萃取法 |
Oilseed residues - Determination of oil content - Part 2: Rapid extraction method |
ISO 7341-2000 |
银行业务.银行往来帐户对帐表 |
Banking - Nostro accounts reconciliation |
ISO 7342-1982 |
道路车辆.故障判断系统.点火系统试验设备 |
Road vehicles; Diagnostic systems; Equipment for ignition systems testing |
ISO 7343-1993 |
电影技术.在35mm电影拷贝上双声轨摄影录音.位置和宽度尺寸 |
Cinematography; two-track photographic sound records on 35 mm motion-picture prints; positions and width dimensions |
ISO 7345-1987 |
热绝缘.物理量与定义 |
Thermal insulation; Physical quantities and definitions |
ISO 7346-1-1996 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死物质毒性的测定.第1部分:静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 1: Static method |
ISO 7346-2-1996 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死物质毒性的测定.第2部分:半静态法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 2: Semi-static method |
ISO 7346-3-1996 |
水质.对淡水鱼(Brachydanio rerio,Hamilton-Buchanan(真骨下纲,鲤科))急性致死物质毒性的测定.第4部分:直流法 |
Water quality - Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] - Part 3: Flow-through method |
ISO 7347-1987 |
铁合金.检验取样和样品制备偏差的实验方法 |
Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation |
ISO 7348-1992 |
玻璃容器.制造用词汇 |
Glass containers; manufacture; vocabulary |
ISO 7349-1983 |
热塑塑料阀.连接基准 |
Thermoplastics valves; Connection references |
ISO 735-1977 |
油料种子残渣.盐酸不溶性灰分的测定 |
Oilseed residues; Determination of ash insoluble in hydrochloric acid |
ISO 7353-1985 |
玫瑰木油.α-萜品醇含量的测定.在填充塔中用气相色谱法测定 |
Oil of rosewood; determination of alpha-terpineol content; gas chromatographic method on packed columns |
ISO 7355-1985 |
黄樟油和肉豆蔻油.黄樟素和顺式及反式异黄樟素含量的测定.在填充塔中用气相色谱法测定 |
Oils of sassafras and nutmeg; Determination of safrole and cis- and trans-isosafrole content; Gas chromatographic method on packed columns |
ISO 7356-1985 |
含酮的侧柏油和鼠尾草油(Salvia officinalis).α和β侧柏酮含量的测定.在填充塔中用气相色谱法测定 |
Oils of thujone-containing Artemisia and oil of sage (Salvia officinalis Linnaeus); Determination of alpha- and beta-thujone content; Gas chromatographic method on packed columns |
ISO 7357-1985 |
白菖油.顺式β细辛脑含量的测定.在填充塔中用气相色谱法测定 |
Oil of calamus; Determination of cis-beta-asarone content; Gas chromatographic method on packed columns |
ISO 7358-2002 |
全部或部分在香柠檬烯中稀释的香柠檬油、柠檬油、香橼油和莱姆酸橙油.用高压液相色谱法测定香柠檬烯的含量(HPLC) |
Oils of bergamot, lemon, citron and lime, fully or partially reduced in bergapten - Determination of bergapten content by high-pressure liquid chromatography (HPLC) |
ISO 7359-1985 |
香精油.在填充塔中用气相色谱法分析.一般方法 |
Essential oils; Analysis by gas chromatography on packed columns; General method |
ISO 7361-1986 |
建筑物性能标准.用同样来源的构件制成的立面性能级别表示法 |
Performance standards in building; Presentation of performance levels of facades made of same-source components |
ISO 7363-1986 |
起重机和提升设备.技术特性和验收文件 |
Cranes and lifting appliances; Technical characteristics and acceptance documents |
ISO 7364-1983 |
造船和海上建筑物.甲板机械.舷梯绞车 |
Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches |
ISO 7365-1983 |
造船和海上建筑物.甲板机械.深海用拖曳绞车 |
Shipbuilding and marine structures; Deck machinery; Towing winches for deep sea use |
ISO 7366-1987 |
动植物脂肪和油.1-甘油-酸酯和游离甘油含量的测定 |
Animal and vegetable fats and oils; Determination of 1-monoglycerides and free glycerol contents |
ISO 7368-1989 |
液压传动.二油口插装式阀.腔室 |
Hydraulic fluid power; two-port slip-in cartridge valves; cavities |
ISO 7369-1995 |
管道工程.柔性金属软管.一般术语词汇 |
Pipework - Flexible metallic hoses - Vocabulary of general terms |
ISO 7369-2004 |
管道工程.金属软管和软管组件.词汇 |
|
ISO 737-1975 |
针叶树锯材.尺寸.测量方法 |
(Coniferous sawn timber; Sizes; Methods of measurement) |
ISO 7370-1983 |
玻璃纤维增强热固性塑料(GRP)管和配件.公称直径,规定直径和标准长度 |
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths |
ISO 7371 AMD 1-1997 |
家用冷冻设备.有或没有低温隔层的冰箱.特征和试验方法.补充件1:强烈易腐食品防腐用特殊冷冻室 |
(Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods; Amendment 1: Special compartments for the preservation of highly perishable foodstuffs) |
ISO 7371-1995 |
家用冷冻设备.有低温隔层和无低温隔层的冰箱特性和试验方法 |
(Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods) |
ISO 7372-1993 |
贸易数据名录.UNTDED 1993.第1篇:标准数据 |
(Trade data elements directory; UNTDED 1993; volume 1: standard data elements) |
ISO 7373-1987 |
铁合金.检验样品组成部分精度的实验方法 |
(Ferroalloys; Experimental methods for checking the precision of sample division) |
ISO 7375-1-1986 |
道路车辆.汽车和拖挂车辆之间气压制动连接装置的蛇形管装置.第1部分:尺寸 |
(Road vehicles; Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles; Part 1 : Dimensions) |
ISO 7375-2-1998 |
道路车辆.牵引车和拖挂车辆之间气压制动连接装置的蛇形管装置.第2部分:性能要求 |
(Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements) |
ISO 7376-1-1994 |
喉镜配件.第1部分:钩接式有柄刀片装置 |
(Laryngoscopic fittings - Part 1: Conventional hook-on type handle-blade fittings) |
ISO 7376-2-1997 |
喉镜检查器.第2部分:微型电灯.螺纹和插座 |
(Laryngoscopic fittings - Part 2: Miniature electric lamps - Screw threads and sockets for conventional blades) |
ISO 7376-2003 |
麻醉和呼吸设备.气管插管术用喉镜 |
|
ISO 7376-3-1996 |
喉镜检查器.第3部分:纤维照明可重复使用的刚性喉镜 |
(Laryngoscopic fittings - Part 3: Fibre-illuminated re-usable rigid laryngoscopes) |
ISO 7377-1984 |
刺柏果(Juniperus communis Linnaeus).规范 |
(Juniper berries (Juniperus communis Linnaeus); Specification) |
ISO 7378-1983 |
紧固件.螺栓、螺钉和双头螺柱.开口销孔和穿丝孔 |
(Fasteners; Bolts, screws and studs; Split pin holes and wire holes) |
ISO 7379-1983 |
内六角头有肩螺钉 |
Hexagon socket head shoulder screws |
ISO 738-1981 |
针叶树锯材.尺寸.允许偏差和收缩率 |
Coniferous sawn timber; Sizes; Permissible deviations and shrinkage |
ISO 7380-1997 |
内六角圆头螺钉 |
Hexagon socket button head screws |
ISO 7380-2004 |
内六角平圆头螺钉 |
|
ISO 7381-1986 |
工业用丁二烯.低聚物的测定.气相色谱法 |
Butadiene for industrial use; Determination of oligomers; Gas chromatographic method |
ISO 7382-1986 |
工业用乙烯.液相和气相取样 |
Ethylene for industrial use; Sampling in the liquid and the gaseous phase |
ISO 7384-1986 |
人造大气环境的腐蚀试验.一般要求 |
(Corrosion tests in artificial atmosphere; General requirements) |
ISO 7385-1983 |
核电站.收集可靠性资料的质量保证导则 |
(Nuclear power plants; Guidelines to ensure quality of collected data on reliability) |
ISO 7386-1984 |
茴香子(Pimpinella anisum Linnaeus)规范 |
(Aniseed (Pimpinella anisum Linnaeus); Specification) |
ISO 7387-1-1983 |
塑聚氯乙烯管零件组装用有溶剂的粘合剂.特性.第1部分:基本试验方法 |
(Adhesives with solvents for assembly of u PVC pipe elements; Characterization; Part 1 : Basic test methods) |