标准号 |
中文名称 |
英文名称 |
| ISO 7501-1985 |
识别卡.计算机可读证件 |
Identification cards; Machine readable passport |
| ISO 7503-1-1988 |
表面污染的评估.第1部分:β发射器(最大β能量大于0.15MeV)和α发射器 |
Evaluation of surface contamination; part 1: beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters |
| ISO 7503-2-1988 |
表面污染的评估.第2部分:氚的表面污染 |
Evaluation of surface contamination; part 2: tritium surface contamination |
| ISO 7503-3-1996 |
表面污染的评估.第3部分:同质异能跃迁和电子俘获发射器、低能β发射器 |
Evaluation of surface contamination - Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters ( 0,15 MeV) |
| ISO 7504-2001 |
气体分析.词汇 |
Gas analysis - Vocabulary |
| ISO 7505-1986 |
林业机械.链锯.人手传递的振动测量 |
Forestry machinery; Chain saws; Measurement of hand-transmitted vibration |
| ISO 7506-1984 |
纺织机械和附件.提花机穿综用综框的标准号 |
Textile machinery and accessories; Numbering of harnesses for drawing-in on Jacquard machines |
| ISO 7507-1-1993 |
石油和液态石油产品.立式圆柱形罐的校验.第1部分:油罐的计量法 |
Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 1: strapping method |
| ISO 7507-1-2003 |
石油和液态石油产品.直立式圆筒状油罐的标定.第1部分:围测法 |
|
| ISO 7507-1-2003 |
石油和液态石油产品.直立式圆筒状油罐的标定.第1部分:围测法 |
|
| ISO 7507-2-1993 |
石油和液态石油产品.立式圆柱形罐的校验.第2部分:光学对比线法 |
Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 2: optical reference line method |
| ISO 7507-3-1993 |
石油和液态石油产品.立式圆柱形罐的校验.第3部分:光学三角形测量法 |
Petroleum and liquid petroleum products; calibration of vertical cylindrical tanks; part 3: optical-triangulation method |
| ISO 7507-4-1995 |
石油和液态石油产品.立式圆柱形罐的校验.第4部分:内电光通达距离法 |
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 4: Internal electro-optical distance-ranging method |
| ISO 7507-5-2000 |
石油和液态石油产品.立式圆柱形罐的校准.第5部分:内电光通达距离法 |
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 5: External electro-optical distance-ranging method |
| ISO 7508-1985 |
压力管用未增塑聚氯乙烯阀(PVC-U).基本尺寸.米制系列 |
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure; Basic dimensions; Metric series |
| ISO 7509-2000 |
塑料管道系统.玻璃增强热固性塑料(GRP)管道.持续内压力下破裂时间的测定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure |
| ISO 751-1998 |
水果和蔬菜制品.水不溶性固体物质含量的测定 |
Fruit and vegetable products - Determination of water-insoluble solids |
| ISO 7510-1997 |
塑料管系统.玻璃增强塑料(GRP)件.重量法测定成份 |
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method |
| ISO 7511-1999 |
塑料管道系统.玻璃纤维增强热固塑料(GRP)管和配件.确定短期内压下管壁密封性的检验方法 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure |
| ISO 7513-1990 |
固体速溶茶.水分(在103℃时质量损失)的测定 |
Instant tea in solid form; determination of moisture content (loss in mass at 103 鳦) |
| ISO 7514-1990 |
固体速溶茶.总灰分测定 |
Instant tea in solid form; determination of total ash |
| ISO 7516-1984 |
固体状速溶茶.取样 |
Instant tea in solid form; Sampling |
| ISO 7518-1983 |
技术制图.建筑制图.拆除和重建的简化表示法 |
Technical drawings; Construction drawings; Simplified representation of demolition and rebuilding |
| ISO 7519-1991 |
技术制图.建筑制图.总体布置图和构件图表示法的一般原理 |
Technical drawings; construction drawings; general prinicples of presentation for general arrangement and assembly drawings |
| ISO 752-1981 |
锌锭 |
Zinc ingots |
| ISO 752-2004 |
锌锭 |
|
| ISO 7520-1985 |
镍铁.钴含量的测定.火焰原子吸收光谱测定法 |
Ferronickel; Determination of cobalt content; Flame atomic absorption spectrometric method |
| ISO 7523-1985 |
镍.银、砷、铋、镉、铅、锑、硒、锡、 和铊含量的测定.电热原子吸收光谱测定法 |
Nickel; Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents; Electrothermal atomic absorption spectrometric method |
| ISO 7524-1985 |
镍、镍铁和镍合金.碳含量的测定.感应电炉燃烧后红外线吸收法 |
Nickel, ferronickel and nickel alloys; Determination of carbon content; Infra-red absorption method after induction furnace combustion |
| ISO 7525-1985 |
镍.硫含量的测定.生成硫化氢后亚甲蓝分子吸收光谱测定法 |
Nickel; Determination of sulfur content; Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide |
| ISO 7526-1985 |
镍、镍铁和镍合金.硫含量的测定.感应电炉燃烧后红外线吸收法 |
Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion |
| ISO 7527-1985 |
镍、镍铁和镍合金.硫含量的测定.感应电炉燃烧后碘量滴定法 |
Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion |
| ISO 7528-1989 |
镍合金.铁含量的测定.用重铬酸钾滴定法 |
Nickel alloys; determination of iron content; titrimetric method with potassium dichromate |
| ISO 7529-1989 |
镍合金.铬含量的测定.用硫酸铁(II)铵电势滴定法 |
Nickel alloys; determination of chromium content; potentiometric titration method with ammonium iron(II) sulfate |
| ISO 753-1-1981 |
工业用乙酸.试验方法.第1部分:总则 |
Acetic acid for industrial use; Methods of test; Part 1 : General |
| ISO 753-10-1981 |
工业用乙酸.试验方法.第10部分:重金属(包括铁)目测检验 |
Acetic acid for industrial use; Methods of test; Part 10 : Visual limit test for heavy metals (including iron) |
| ISO 753-2-1981 |
工业用乙酸.试验方法.第2部分:乙酸含量的测定.滴定法 |
Acetic acid for industrial use; Method of test; Part 2 : Determination of acetic acid content; Titrimetric method |
| ISO 753-3-1983 |
工业用乙酸.试验方法.第3部分:甲酸含量的测定.碘量法 |
Acetic acid for industrial use; Methods of test; Part 3 : Determination of formic acid content; Iodometric method |
| ISO 753-4-1981 |
工业用乙酸.试验方法.第4部分:乙醛单体含量的测定.滴定法 |
Acetic acid for industrial use; Methods of test; Part 4 : Determination of acetaldehyde monomer content; Titrimetric method |
| ISO 753-5-1981 |
工业用乙酸.试验方法.第5部分:乙醛总含量的测定.滴定法 |
Acetic acid for industrial use; Methods of test; Part 5 : Determination of total acetaldehyde content; Titrimetric method |
| ISO 753-6-1981 |
工业用乙酸.试验方法.第6部分:高锰酸盐指数的测定 |
Acetic acid for industrial use; Methods of test; Part 6 : Determination of permanganate index |
| ISO 753-7-1981 |
工业用乙酸.试验方法.第7部分:重铬酸盐指数的测定 |
Acetic acid for industrial use; Methods of test; Part 7 : Determination of dichromate index |
| ISO 753-8-1981 |
工业用乙酸.试验方法.第8部分:无机氯化物极限目测试验 |
Acetic acid for industrial use; Methods of test; Part 8 : Visual limit test for inorganic chlorides |
| ISO 753-9-1981 |
工业用乙酸.试验方法.第9部分:无机硫酸盐目测试验 |
Acetic acid for industrial use; Methods of test; Part 9 : Visual limit test for inorganic sulphates |
| ISO 7530-1-1990 |
镍合金.火焰原子吸收光谱测定分析法.第1部分:一般要求和样品溶解 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 1: general requirements and sample dissolution |
| ISO 7530-2-1990 |
镍合金.火焰原子吸收光谱测定分析法.第2部分:钴含量测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 2: determination of cobalt content |
| ISO 7530-3-1990 |
镍合金.火焰原子吸收光谱测定分析法.第3部分:铬含量测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 3: determination of chromium content |
| ISO 7530-4-1990 |
镍合金.火焰原子吸收光谱测定分析法.第4部分:铜含量测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 4: determination of copper content |
| ISO 7530-5-1990 |
镍合金.火焰原子吸收光谱测定分析法.第5部分:铁含量测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 5: determination of iron content |
| ISO 7530-6-1990 |
镍合金.火焰原子吸收光谱测定分析法.第6部分:锰含量测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 6: determination of manganese content |
| ISO 7530-7-1992 |
镍合金.火焰原子吸收光谱分析.第7部分:铝含量测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 7: determination of aluminium content |
| ISO 7530-8-1992 |
镍合金.火焰原子吸收光谱分析.第8部分:硅含量测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 8: determination of silicon content |
| ISO 7530-9-1993 |
镍合金.火焰原子吸收光谱分析.第9部分:钒含量的测定 |
Nickel alloys; flame atomic absorption spectrometric analysis; part 9: determination of vanadium content |
| ISO 7531-1987 |
通用钢丝绳的索具.特性和规范 |
Wire rope slings for general purposes; Characteristics and specifications |
| ISO 7535-1984 |
表面活性剂.家用器皿洗涤机用洗涤剂.性能比较试验指南 |
Surface active agents; Detergents for domestic machine dishwashing; Guide for comparative testing of performance |
| ISO 7536-1994 |
石油产品.汽油耐氧化性测定.诱导期方法 |
Petroleum products - Determination of oxidation stability of gasoline - Induction period method |
| ISO 7537-1997 |
石油产品.酸值的测定.半微量显色指示剂滴定法 |
Petroleum products - Determination of acid number - Semi-micro colour-indicator titration method |
| ISO 7539-1-1987 |
金属和合金的腐蚀.腐蚀应力试验.第1部分:试验程序的通用指南 |
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures |
| ISO 7539-2-1989 |
金属和合金的腐蚀.应力腐蚀试验.第2部分:弯曲梁试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens |
| ISO 7539-3-1989 |
金属和合金的耐腐蚀性.应力腐蚀试验.第3部分:U型弯曲试样的制备和使用 |
Corrosion of metals and alloys; stress corrosion testing; part 3: preparation and use of U-bend specimens |
| ISO 7539-4-1989 |
金属和合金的腐蚀.应力腐蚀试验.第4部分:单向载荷拉伸试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens |
| ISO 7539-5-1989 |
金属和合金的腐蚀.应力腐蚀试验.第5部分:C-环形试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens |
| ISO 7539-6-2003 |
金属和合金的腐蚀.应力腐蚀试验.第6部分:恒定负荷或恒定位移条件下试验用预破裂试样的制备 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement |
| ISO 7539-6-2003 |
金属和合金的腐蚀.应力腐蚀试验.第6部分:恒定负荷或恒定位移条件下试验用预破裂试样的制备 |
|
| ISO 7539-7-1989 |
金属和合金的腐蚀.应力腐蚀试验.第7部分:慢速应变率试验 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing |
| ISO 7539-8-2000 |
金属和合金的腐蚀.应力腐蚀试验.第8部分:焊件评定试样的制备和使用 |
Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments |
| ISO 7539-9-2003 |
金属和合金的腐蚀.应力腐蚀试验.第9部分:在提升荷载或提升位移下试验用预裂纹试样的制备和使用 |
(Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement) |
| ISO 7539-9-2003 |
金属和合金的腐蚀.应力腐蚀试验.第9部分:在提升荷载或提升位移下试验用预裂纹试样的制备和使用 |
|
| ISO 754-1982 |
工业用乙酸酐.试验方法 |
Acetic anhydride for industrial use; Methods of test |
| ISO 7540-1984 |
辣椒粉(Capsicum annuum Linnaeus).规范 |
Ground (powdered) paprika (Capsicum annuum Linnaeus); Specification |
| ISO 7541-1989 |
辣椒粉.天然色素总含量的测定 |
Ground (powdered) parika; determination of total natural colouring matter content |
| ISO 7542-1984 |
辣椒粉(Capsicum annuum Linnaeus).显微镜检验 |
Ground (powdered) paprika (Capsicum annuum Linnaeus); Microscopical examination |
| ISO 7543-1-1994 |
辣椒和辣椒油树脂.辣椒素总含量的测定.第1部分:光谱测定法 |
Chillies and chilli oleoresins - Determination of total capsaicinoid content - Part 1: Spectrometric method |
| ISO 7543-2-1993 |
辣椒和辣椒油树脂.辣椒素总含量的测定.第2部分:高性能液相色谱方法 |
Chillies and chilli oleoresins; determination of total capsaicinoid content; part 2: method using high-performance liquid chromatography |
| ISO 7545-1983 |
造船和海上建筑物.内河航船.顶推式驳船的单栓自动连接器 |
Shipbuilding and marine structures; Inland navigation; Single-lock automatic couplings for push tows |
| ISO 7546-1983 |
土方机械.装载机和前装式挖土机铲斗.额定容量 |
Earth-moving machinery; Loader and front loading excavator buckets; Volumetric ratings |
| ISO 7547-2002 |
船舶和海上技术.起居处所的空调和通风.设计条件和计算基础 |
Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations |
| ISO 755-1-1981 |
工业用丁一醇.试验方法.第1部分:总则 |
Butan-1-ol for industrial use; Methods of test; Part 1 : General |
| ISO 755-2-1981 |
工业用丁一醇.试验方法.第2部分:酸度的测定.滴定法 |
Butan-1-ol for industrial use; Methods of test; Part 2 : Determination of acidity; Titrimetric method |
| ISO 755-3-1981 |
工业用丁一醇.试验方法.第3部分:硫酸颜色试验 |
Butan-1-ol for industrial use; Methods of test; Part 3: Sulphuric acid colour test |
| ISO 7550-1985 |
实验室玻璃器皿.一次性使用的微量移液管 |
Laboratory glassware; Disposable micropipettes |
| ISO 7551-1996 |
牙科吸收点 |
Dental absorbent points |
| ISO 7558-1988 |
水果及蔬菜预包装导则 |
Guide to the prepacking of fruits and vegetables |
| ISO 756-1-1981 |
工业用丙二醇.试验方法.第1部分:总则 |
Propan-2-ol for industrial use; Methods of test; Part 1 : General |
| ISO 756-2-1981 |
工业用丙二醇.试验方法.第2部分:酸度的测定.滴定法 |
Propan-2-ol for industrial use; Methods of test; Part 2: Determination of acidity; Titrimetric method |
| ISO 756-3-1981 |
工业用丙二醇.试验方法.第3部分:与水互溶性试验 |
Propan-2-ol for industrial use; Methods of test; Part 3 : Test for miscibility with water |
| ISO 7560-1995 |
黄瓜.贮存和冷藏运输指南 |
Cucumbers - Storage and refrigerated transport |
| ISO 7561-1984 |
栽培的蘑菇.冷藏和冷藏运输指南 |
Cultivated mushrooms; Guide to cold storage and refrigerated transport |
| ISO 7562-1990 |
马铃薯.人工通风窑内贮存准则 |
Potatoes; guidelines for storage in artificially ventilated stores |
| ISO 7563-1998 |
新鲜水果和蔬菜.词汇 |
Fresh fruits and vegetables - Vocabulary |
| ISO 7565-1993 |
缩微摄影技术.透明缩微胶片阅读器.性能测量 |
Micrographics; readers for transparent microforms; measurement of characteristics |
| ISO 7568-1986 |
木工机械.单面刨光用有旋转刀架的厚度刨床.专用术语和验收条件 |
Woodworking machines; Thickness planing machines with rotary cutterblock for one-side dressing; Nomenclature and acceptance conditions |
| ISO 7569-1986 |
木工机械.两侧.三侧或四侧刨削用刨床.专用术语和验收条件 |
Woodworking machines; Planing machines for two-, three- or four-side dressing; Nomenclature and acceptance conditions |
| ISO 757-1-1982 |
工业用丙酮.试验方法.第1部分:总则 |
Acetone for industrial use; Methods of test; Part 1 : General |
| ISO 757-2-1982 |
工业用丙酮.试验方法.第2部分:用酚酞测定酸度.滴定法 |
Acetone for industrial use; Methods of test; Part 2 : Determination of acidity to phenolphthalein; Titrimetric method |
| ISO 757-3-1982 |
工业用丙酮.试验方法.第3部分:水混溶性试验 |
Acetone for industrial use; Methods of test; Part 3 : Test for miscibility with water |
| ISO 757-5-1982 |
工业用丙酮.试验方法.第5部分:用阿加尔汉试剂对照试验 |
Acetone for industrial use; Methods of test; Part 5 : Control test with Agulhon`s reagent |
| ISO 7570-1986 |
木工机械.平刨和压刨床.专用术语和验收条件 |
Woodworking machines; Surface planing and thicknessing machines; Nomenclature and acceptance conditions |
| ISO 7571-1986 |
木工机械.有单面刨光刀架刨的平面刨床.专用术语和验收条件 |
Woodworking machines; Surface planing machines with cutterblock for one-side dressing; Nomenclature and acceptance conditions |
| ISO 7572-1984 |
机床工件夹紧的固定式工作台验收和安装条件 |
Conditions of acceptance and installation for work-holding fixed tables of machine tools |
| ISO 7573-1983 |
技术制图.栏目表 |
Technical drawings; Item lists |
| ISO 7574-1-1985 |
声学.测定和检验机械及设备标定噪音发生值的统计方法.第1部分:一般依据和定义 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 1 : General considerations and definitions |
| ISO 7574-2-1985 |
声学.测定和检验机械及设备标定噪音发生值的统计方法.第2部分:单个机械标定值法 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 2 : Methods for stated values for individual machines |
| ISO 7574-3-1985 |
声学.测定和检验机械及设备标定噪音发生值的统计方法.第3部分:机械群组标定值的简易(转换)法 |
Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 3 : Simple (transition) method for stated values for batches of machines |
| ISO 7574-4-1985 |
声学.测定和检验机械及设备标定噪音发生值的统计方法.第4部分:机械群组标定值法 |
Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines |
| ISO 7575-1993 |
商业用道路车辆.扁平配件轮固定螺母 |
Commercial road vehicles; flat attachment wheel fixing nuts |
| ISO 7576-1990 |
道路车辆.压燃式发动机的两级燃油滤清器顶盖.装配和连接尺寸 |
Road vehicles; two-stage fuel filters for compression-ignition engines; mounting and connecting dimensions |
| ISO 7578-2001 |
道路车辆.罩型热线点火塞.一般要求和试验方法 |
Road vehicles - Sheath-type glow-plugs - General requirements and test methods |
| ISO 7579-1990 |
染料.有机溶剂溶解度的测定.重量法电影摄影.在打过8mmS型影像区域.位置和尺寸 |
Dyestuffs; determination of solubility in organic solvents; gravimetric method |
| ISO 758-1976 |
工业用液态化学制品.在20℃时的浓度测定 |
Liquid chemical products for industrial use; Determination of density at 20 degrees C |
| ISO 7580-1987 |
识别卡.原始电报卡.金融交易量 |
Identification cards; Card originated messages; Content for financial transactions |
| ISO 7583-1986 |
铝及其合金的阳极氧化.词汇 |
Anodizing of aluminium and its alloys; Vocabulary Trilingual edition |
| ISO 7586-1985 |
黄油.水分扩散值的测定 |
Butter; Determination of water dispersion value |
| ISO 7587-1986 |
锡铅合金电镀层.规范和试验方法 |
Electroplated coatings of tin-lead alloys; Specification and test methods |
| ISO 7588-1-1998 |
道路车辆.电/电子开关设备.第1部分:继电器和闪光器 |
Road vehicles - Electrical/electronic switching devices - Part 1: Relays and flashers |
| ISO 7588-2-1998 |
道路车辆.电/电子开关设备.第2部分:电子设备 |
Road vehicles - Electrical/electronic switching devices - Part 2: Electronic devices |
| ISO 7588-3-1998 |
道路车辆.电/电子开关设备.第3部分:微继电器 |
Road vehicles - Electrical/electronic switching devices - Part 3: Microrelays |
| ISO 7589-2002 |
气体分析.用动态容积法标定气体混合物.第10部分:渗透法 |
Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| ISO 759-1981 |
工业用挥发性有机液体.在水槽中蒸发后干涸残余物的测定.一般方法 |
Volatile organic liquids for industrial use; Determination of dry residue after evaporation on water bath; General method |
| ISO 7590-2001 |
钢丝输送带.总厚度和覆层厚度的测量方法 |
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com