标准号 |
中文名称 |
英文名称 |
| ISO 5810-1982 |
淀粉及其制品.氯化物含量的测定.电位滴定法 |
Starches and derived products; Determination of chloride content; Potentiometric method |
| ISO 5813-1983 |
水质.溶解氧的测定.碘量法 |
Water quality; Determination of dissolved oxygen; Iodometric method |
| ISO 5814-1990 |
水质.溶解氧的测定.电化探测法 |
Water quality; determination of dissolved oxygen; electrochemical probe method |
| ISO 5815-1-2003 |
水质.n日生化需氧量(BODn)的测定.第1部分:加烯丙硫脲的稀释和接种法 |
(Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 1: Dilution and seeding method with allythiourea addition ) |
| ISO 5815-1-2003 |
水质.n日生化需氧量(BODn)的测定.第1部分:加烯丙硫脲的稀释和接种法 |
|
| ISO 5815-1989 |
水质.五天后(BOD5)对生化氧需求的测定.稀释和催育法 |
Water quality; determination of biochemical oxygen demand after 5 days (BOD); dilution and seeding method |
| ISO 5815-2-2003 |
水质.n日生化需氧量(BODn)的测定.第2部分:未稀释样品的测定法 |
(Water quality - Determination of biochemical oxygen demand after n days (BOD) - Part 2: Method for undiluted samples) |
| ISO 5815-2-2003 |
水质.n日生化需氧量(BODn)的测定.第2部分:未稀释样品的测定法 |
|
| ISO 5817-1992 |
钢弧焊接头.缺点等级导则 |
Arc-welded joints in steel; guidance on quality levels for imperfections |
| ISO 5817-2003 |
焊接.钢、镍、钛及其合金熔焊接头(束焊除外).缺陷的质量分级 |
|
| ISO 582-1995 |
滚动轴承.倒棱尺寸的最大值 |
Rolling bearings - Chamfer dimensions - Maximum values |
| ISO 5821-1979 |
电阻点焊电极帽接头 |
Resistance spot welding electrode caps |
| ISO 5822-1988 |
点焊设备.锥度塞规和锥度环规 |
Spot welding equipment; taper plug gauges and taper ring gauges |
| ISO 5826-1999 |
电阻焊设备.变压器.适用于各种变压器的一般规范 |
Resistance welding equipment - Transformers - General specifications applicable to all transformers |
| ISO 5827-1983 |
点焊.电极挡块和夹紧装置 |
Spot welding; Electrode back-ups and clamps |
| ISO 5828-2001 |
电阻焊设备.连接水冷耳的接线柱用的辅助电缆 |
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
| ISO 5829-1984 |
电阻点焊.内锥度1:10的电极接头 |
Resistance spot welding; Electrode adaptors, female taper 1 : 10 |
| ISO 583-1-1999 |
带织物架的传送带.整个厚度和部分厚度.第1部分:试验方法 |
Conveyor belts with a textile carcass - Total thickness and thickness of elements - Part 1: Methods of test |
| ISO 5830-1984 |
电阻点焊.凸头电极帽 |
Resistance spot welding; Male electrode caps |
| ISO 5832-1-1997 |
外科植入物.金属材料.第1部分:可锻不锈钢 |
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel |
| ISO 5832-11-1994 |
外科植入物.金属材料.第11部分:锻造6钛/7铝/铌合金 |
Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| ISO 5832-12-1996 |
外科植入物.金属材料.第12部分:锻造钴/铬/钼合金 |
Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
| ISO 5832-2-1999 |
外科植入物.金属材料.第2部分:非合金钛 |
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium |
| ISO 5832-3-1996 |
外科植入物.金属材料.第3部分:钛6-铅4-钒可锻合金 |
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ISO 5832-4-1996 |
外科植入物.金属材料.第4部分:钴铬钼铸造合金 |
Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
| ISO 5832-6-1997 |
外科植入物.金属材料.第6部分:可锻钴镍铬钼合金 |
Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| ISO 5832-7-1994 |
外科植入物.金属材料.第7部分:可锻的和冷成形的钴铬镍钼铁合金 |
Implants for surgery; metallic materials; part 7: forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| ISO 5832-8-1997 |
外科植入物.金属材料.第8部分:可锻的钴镍铬钼钨铁合金 |
Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| ISO 5833-2002 |
外科植入物.丙烯酸树脂粘接剂 |
Implants for surgery - Acrylic resin cements |
| ISO 5834-1-1998 |
外科植入物.超高分子量聚乙烯.第1部分:粉剂型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Part 1: Powder form |
| ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.第2部分:模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Part 2 : Moulded forms |
| ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.第2部分:模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Part 2 : Moulded forms |
| ISO 5835-1991 |
外科植入物.不对称螺纹的六角头球面颈金属骨螺钉.尺寸 |
Implants for surgery; metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread; dimensions |
| ISO 5836-1988 |
外科植入物.金属骨板.相应于具有不对称螺纹及球形底面的螺钉的孔 |
Implants for surgery; metal bone plates; holes corresponding to screws with asymmetrical thread and spherical under-surface |
| ISO 5837-1-1985 |
外科植入物.骨髓腔内插钉装置.第1部分:三叶状或V形截面的骨髓内腔钉 |
Implants for surgery; Intramedullary nailing systems; Part 1 : Intramedullary nails with cloverleaf or V-shaped cross-section |
| ISO 5837-2-1980 |
外科植入物.骨髓腔内插钉术装置.第2部分:髓腔用钉 |
Implants for surgery; Intramedullary nailing systems; Part 2 : Medullary pins |
| ISO 5838-1-1995 |
外科植入物.接骨钉和骨架金属丝.第1部分:材料和机械要求 |
Implants for surgery - Skeletal pins and wires - Part 1: Material and mechanical requirements |
| ISO 5838-2-1991 |
外科植入物.骨骼销钉和骨架金属丝.第2部分:斯台因曼骨骼销钉.尺寸 |
Implants for surgery; skeletal pins and wires; part 2: Steinmann skeletal pins; dimensions |
| ISO 5838-3-1993 |
外科植入物.骨架销钉和骨架金属丝.第3部分:Kirschner骨架金属丝 |
Implants for surgery; skeletal pins and wires; part 3: Kirschner skeletal wires |
| ISO 584-1982 |
塑料.未饱和的聚酯树脂.80℃时的反应性测定(常规方法) |
Plastics; Unsaturated polyester resins; Determination of reactivity at 80 degrees C (conventional method) |
| ISO 5840-1996 |
心血管植入物.心脏瓣膜修复术 |
Cardiovascular implants - Cardiac valve prostheses |
| ISO 5841-1-1989 |
心脏起搏器.第1部分:可植入起搏器 |
Cardiac pacemakers; part 1: implantable pacemakers |
| ISO 5841-2-2000 |
外科植入物.心脏起搏器.第2部分:对使用脉搏发生器或导管的人的临床实践报告 |
Implants for surgery - Cardiac pacemakers - Part 2: Reporting of clinical performance of populations of pulse generators or leads |
| ISO 5841-3 Technical Corrigendum 1-2003 |
外科植入物.心脏起搏器.第3部分:可植入起搏器用扁平型连接器(IS-1).技术勘误1 |
(Implants for surgery - Cardiac pacemakers - Part 3: Low-profile connectors (IS-1) for implantable pacemakers; Technical Corrigendum 1) |
| ISO 5841-3 Technical Corrigendum 1-2003 |
外科植入物.心脏起搏器.第3部分:可植入起搏器用扁平型连接器(IS-1).技术勘误1 |
|
| ISO 5841-3-2000 |
外科植入物.心脏起搏器.第3部分:可植入起搏器用低截面连接器[IS-1] |
Implants for surgery - Cardiac pacemakers - Part 3: Low-profile connectors [IS-1] for implantable pacemakers |
| ISO 5843-1-1985 |
航空航天器结构.等义术语表.第1部分:航空航天电力设备.三种语言版 |
Aerospace construction; List of equivalent terms; Part 1 : Aerospace electrical equipment Trilingual edition |
| ISO 5843-10-1988 |
航天.等义术语表.第10部分:飞机结构 |
Aerospace; list of equivalent terms; part 10: aircraft structure |
| ISO 5843-2-1990 |
航空航天.等义术语表.第2部分:航空航天用铆钉.三种语言版 |
Aerospace; list of equivalent terms; part 2: aerospace rivets |
| ISO 5843-3-1997 |
航空航天的等义术语表.第3部分:航空航天用螺栓和螺母 |
Aerospace - List of equivalent terms - Part 3: Aerospace bolts and nuts |
| ISO 5843-4-1990 |
航空航天.等义术语表.第4部分:飞行动力学 |
Aerospace; list of equivalent terms; part 4: flight dynamics |
| ISO 5843-5-1990 |
航空航天.等义术语一览表.第5部分:飞行器设备的环境条件和飞行条件 |
Aerospace; list of equivalent terms; part 5; environmental and operating conditions for aircraft equipment |
| ISO 5843-6-1985 |
航空航天.等义术语表.第6部分:标准大气 |
Aerospace; List of equivalent terms; Part 6 : Standard atmosphere Trilingual edition |
| ISO 5843-8-1988 |
航空航天.等义术语表.第8部分:航空器可靠性 |
Aerospace; list of equivalent terms; part 8: aircraft reliability |
| ISO 5843-9-1988 |
航空航天.等义术语表.第9部分:航空器 |
Aerospace; list of equivalent terms; part 9: aircraft |
| ISO 5845-1-1995 |
技术制图.紧固件的组合的简单表示法.第一部分:通用原则 |
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles |
| ISO 5845-2-1995 |
技术制图.紧固件的组合的简单表示法.第二部分:航空设备用铆钉 |
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment |
| ISO 585-1990 |
塑料.非增塑的醋酸纤维素.水份含量的测定 |
Plastics; unplasticized cellulose acetate; determination of moisture content |
| ISO 5855-1-1999 |
航空航天.MJ螺纹.第1部分:一般要求 |
Aerospace - MJ threads - Part 1: General requirements |
| ISO 5855-2-1999 |
航空航天.MJ螺纹.第2部分:螺栓和螺母的限制尺寸 |
Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts |
| ISO 5855-3-1999 |
航空航天.MJ螺纹.第3部分:液体系统配件的限制尺寸 |
Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems |
| ISO 5856-1991 |
航空航天.强度等级小于或等于1100 MPa的涂覆或不覆内偏置十字形肋驱动普通金属柄中短长度MJ螺纹100普通埋头螺钉.尺寸 |
Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 5857-1988 |
航空航天.强度类别1250MPa和MJ螺纹的合金钢凸头螺栓.采购规格 |
Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification |
| ISO 5858-1999 |
航空航天.最高工作温度小于或等于425℃的自锁螺母的采购规范 |
Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 C - Procurement specification |
| ISO 5859-1991 |
航空航天.液压气动装置和部件原理图的图形符号 |
Aerospace; graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| ISO 5864-1993 |
ISO 英制螺纹.允差和公差 |
ISO inch screw threads; allowances and tolerances |
| ISO 5866-1983 |
飞机.有扁接头的Ⅱ-2型和Ⅱ-3A型插座式的倒向继电器.余隙和固定尺寸 |
Aircraft; 2 and 3A plug-in base change-over relays, Type II, with crimped connections; Clearance and fixing dimensions |
| ISO 5867-1-1996 |
小型飞机.电磁继电器和接触器.第1部分:一般要求 |
Aircraft - Electromagnetic relays and contactors - Part 1: General requirements |
| ISO 587-1997 |
固体矿物燃料.用埃斯凯(Eschkal)混合剂测定氯 |
Solid mineral fuels - Determination of chlorine using Eschka mixture |
| ISO 5878 ADD 1-1983 |
第1次补充 |
Addendum 1-1983 |
| ISO 5878 ADD 2-1983 |
第2次补充 |
Reference atmospheres for aerospace use; addendum 2 |
| ISO 5878 AMD 1-1990 |
第1次修改 |
Reference atmospheres for aerospace use; amendment 1 |
| ISO 5878-1982 |
航空航天用参考大气 |
Reference atmospheres for aerospace use |
| ISO 5884-1987 |
航空航天.液压系统和组件.液压流体固体微粒污染的系统取样和测量方法 |
Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 5887-1981 |
飞机.乘务员接氧气源的调压面具接头的接口 |
Aircraft; Joints for connecting crew members` regulator masks to oxygen sources |
| ISO 5889-1983 |
锰矿石和锰精矿.铝、铜、铅和锌含量的测定.火焰原子吸收光谱测定法 |
Manganese ores and concentrates; Determination of aluminium, copper, lead and zinc contents; Flame atomic absorption spectrometric method |
| ISO 5889-1983 |
锰矿石和锰精矿.铝、铜、铅和锌含量的测定.火焰原子吸收光谱测定法 |
Manganese ores and concentrates; Determination of aluminium, copper, lead and zinc contents; Flame atomic absorption spectrometric method |
| ISO 589-1981 |
硬煤.全水分的测定 |
Hard coal; Determination of total moisture |
| ISO 589-2003 |
硬煤.总水分的测定 |
(Hard coal - Determination of total moisture ) |
| ISO 589-2003 |
硬煤.总水分的测定 |
|
| ISO 5890-1981 |
锰矿石和锰精矿.硅含量的测定.重量法 |
Manganese ores and concentrates; Determination of silicon content; Gravimetric method |
| ISO 5892-1981 |
建筑橡胶衬垫.预制结构衬垫用硫化硬橡胶材料.规范 |
Rubber building gaskets; Materials for preformed solid vulcanized structural gaskets; Specification |
| ISO 5893-2002 |
可拉伸、弯曲和压缩型(恒定的横动速率)橡胶和塑料试验设备规范 |
Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification |
| ISO 5894-1999 |
船和造船技术.有螺栓紧固盖的人孔 |
Ships and marine technology - Manholes with bolted covers |
| ISO 5897-1998 |
轿车.后车窗除雾系统.试验方法 |
Passenger cars - Rear-window demisting system - Test method |
| ISO 5898-1997 |
轿车.轿车后车窗除霜系统.试验方法 |
Passenger cars - Rear-window defrosting system - Test method |
| ISO 590-1981 |
巴西黄樟油 |
Oil of brazilian sassafras |
| ISO 5902-1980 |
高山雪橇.弹性性能的测定 |
Alpine skis; Determination of the elastic properties |
| ISO 5903-1981 |
体育器械.自由体操着地垫和地板.硬度和冲击缓冲的测定 |
Gymnastic equipment; Landing mats and surfaces for floor exercises; Determination of hardness and impact damping |
| ISO 5904-1981 |
体育器械.自由体操用的着地垫和地板.阻滑移的测定 |
Gymnastic equipment; Landing mats and surfaces for floor exercises; Determination of resistance to slipping |
| ISO 5905-1980 |
体育器械.着地垫(2000mm×125mm×60mm) |
Gymnastic equipment; Landing mats (2 000 mm x 1 250 mm x 60 mm) |
| ISO 5906-1980 |
体育器械.自由体操用的地板.垫子 |
Gymnastic equipment; Surfaces for floor exercices; Mats |
| ISO 5907-1980 |
体育器械.自由体操用地板.木地板 |
Gymnastic equipment; Surfaces for floor exercises; Boards |
| ISO 591-1-2000 |
涂料用二氧化钛颜料.第1部分:规范和试验方法 |
Titanium dioxide pigments for paints - Part 1: Specifications and methods of test |
| ISO 5912 AMD 1-1998 |
野营帐篷.修改件1 |
Camping tents; Amendment 1 |
| ISO 5912-1993 |
野营帐篷 |
Camping tents |
| ISO 5912-2003 |
宿营帐篷 |
(Camping tents ) |
| ISO 5912-2003 |
宿营帐篷 |
|
| ISO 5912-2003 |
宿营帐篷 |
|
| ISO 5915-1980 |
工业用六氟硅酸钠.颗粒大小分布的测定.筛分法 |
Sodium hexafluorosilicate for industrial use; Determination of particle size distribution; Sieving method |
| ISO 5916-1982 |
工业用氯代甲烷.杂质的测定.气相色谱法 |
Methyl chloride for industrial use; Determination of impurities; Gas chromatographic methods |
| ISO 5917-1980 |
氯氟代烃.沸程的测定.产品特性试验 |
Chlorofluorinated hydrocarbons; Determination of boiling range; Test for product characterization |
| ISO 5918-1982 |
工业用氯氟代烃.惰性气体含量的测定.气相色谱法.一般原理 |
Chlorofluorohydrocarbons for industrial use; Determination of inert gas content; Gas chromatographic method; General principles |
| ISO 592-1998 |
香精油.旋光度的测定 |
Essential oils - Determination of optical rotation |
| ISO 5920-1983 |
氯氟代烃.水含量的测定.重量法 |
Chlorofluorinated hydrocarbons; Determination of water content; Gravimetric method |
| ISO 5921-1982 |
工业用氯氟代烃.气相色谱分析的一般原理 |
Chlorofluorohydrocarbons for industrial use; Analysis by gas chromatography; General principles |
| ISO 5922-1981 |
可锻铸铁 |
Malleable cast iron |
| ISO 5923-1989 |
火灾防护措施.灭火介质.二氧化碳 |
Fire protection; fire extinguishing media; carbon dioxide |
| ISO 5925-1-1981 |
着火试验.控制烟雾的门户装置性能的评定.第1部分:环境温度试验 |
Fire tests; Evaluation of performance of smoke control door assemblies; Part 1 : Ambient temperature test |
| ISO 5930-1979 |
工业用天然及人造冰晶石和氟化铝.磷含量的测定.还原磷钼 酸盐光度法 |
Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of phosphorus content; Reduced molybdophosphate photometric method |
| ISO 5931-2000 |
铝生产用碳素物.煅烧焦炭和煅烧碳产品.用艾氏卡法测定全硫含量 |
Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method |
| ISO 5932-1980 |
工业用硼酸,氧化硼和四硼酸二钠.钴含量的测定.2-亚硝基-1萘酚光度法 |
Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of cobalt content; 2- nitroso-1- naphthol photometric method |
| ISO 5933-1980 |
工业用硼酸、氧化硼、四硼酸二钠和粗硼酸钠.硼酸、氧化硼和四硼酸二钠中镍总含量的测定以及粗硼酸钠中可溶于碱的镍含量的测定.糠偶酰 α-二肟光度法 |
Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use; determination of total nickel content of boric acid, boric oxide and disodium tetraborates and the alkali-soluble nickel content of crude sodium borates; furil alp |
| ISO 5934-1980 |
工业用粗硼酸钠.碱可溶铜和锰含量的测定.双(二苄基二硫代氨基甲酸)锌和甲醛肟光度法 |
Crude sodium borates for industrial use; Determination of alkali-soluble copper and manganese contents; Zinc bis(dibenzyldithiocarbamate) and formaldehyde oxime photometric methods |
| ISO 5935-1984 |
工业用粗硼酸钠.二氧化硅总含量和碱可溶氧化硅含量的测定.硅钼酸盐光谱测定法 |
Crude sodium borates for industrial use; Determination of total and alkali-soluble silica contents; Molybdosilicate spectrometric method |
| ISO 5936-1980 |
工业用粗硼酸钠.碳酸盐含量的测定.重量法 |
Crude sodium borates for industrial use; Determination of carbonate content; Gravimetric method |
| ISO 5937-1980 |
工业用过硼酸钠.磨耗度的测定 |
Sodium perborates for industrial use; Determination of degree of attrition |
| ISO 5938-1979 |
工业用天然及人造冰晶石和氟化铝.硫含量的测定.X射线荧光光谱法 |
Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of sulphur content; X-ray fluorescence spectrometric method |
| ISO 5939-1980 |
生产铝用碳素材料.电极用沥青.水含量的测定.共沸蒸溜 [迪安--斯达克(Dean and Stark)测定法]法 |
Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method |
| ISO 594-1-1986 |
注射器、针头和某些其它医用设备的有6%锥度的锥形配件.第1部分:一般要求 |
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment; Part 1 : General requirements |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com