标准号 |
中文名称 |
英文名称 |
| EN ISO 8989-1998 |
塑料液态酚醛树脂水溶物的测定 |
Plastics - Liquid phenolic resins - Determination of water miscibility (ISO 8989:1995) |
| EN ISO 899-1-2003 |
塑料 蠕变的测定 第1部分：拉伸蠕变 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003) |
| EN ISO 899-2-2003 |
塑料 蠕变的测定 第2部分：用三点负载测定扰屈蠕变 |
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003) |
| EN ISO 8990-1996 |
绝热稳态传热性质的测定校准和防护热箱法 |
Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box (ISO 8990:1994) |
| EN ISO 8996-2004 |
热环境的人类工效学.代谢率的测定 |
|
| EN ISO 90-1-1999 |
薄壁金属容器尺寸、容量的定义和测定第1部分：顶开罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997) |
| EN ISO 90-2-1999 |
薄壁金属容器尺寸、容量的定义和测定第2部分：一般用途的容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997) |
| EN ISO 90-3-2001 |
薄壁金属容器尺寸、容量的定义和测定第3部分：喷雾罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000) |
| EN ISO 9000-2000 |
质量管理体系基础和词汇 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2000) |
| EN ISO 9000-3-1997 |
质量管理和质量保证标准第3部分：ISO 9001-1994计算机软件的开发、供应、安装和维护应用指南 |
Quality management and quality assurance standards - Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software (ISO 9000-3:1997) |
| EN ISO 9001-2000 |
质量管理体系要求 |
Quality management systems - Requirements (ISO 9001:2000) |
| EN ISO 9004-2000 |
质量管理体系业绩改进指南 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000) |
| EN ISO 9013-2002 |
热切割 热切割分类产品几何量规范和质量公差 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002) |
| EN ISO 9020-1998 |
色漆和清漆用粘合剂胺类树脂的游离甲醛含量的测定亚硫酸钠滴定法 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method (ISO 9020:1994, including Technical Corrigendum 1:1996) |
| EN ISO 9029-1995 |
原油水分的测定蒸馏法 |
Crude petroleum - Determination of water - Distillation method (ISO 9029:1990) |
| EN ISO 9047-2003 |
房屋建筑密封胶变温下的粘合性能的测定 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) |
| EN ISO 9054-1999 |
硬质泡沫塑料自结皮高密度材料的试验方法 |
Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990) |
| EN ISO 9073-2-1996 |
纺织品非织造布试验方法第2部分：厚度的测定 |
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (EN ISO 9073-2:1995) |
| EN ISO 9073-4-1997 |
纺织品非织造布试验方法第4部分：抗撕裂的测定 |
Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) |
| EN ISO 9073-6-2003 |
纺织品非织造布试验方法第6部分：吸水性(注解：认可通知) |
Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) |
| EN ISO 9073-7-1998 |
纺织品非织造布试验方法第7部分：弯曲长度的测定 |
Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995) |
| EN ISO 9073-8-1998 |
纺织品非织造布试验方法第8部分：液体渗透时间的测定(模拟尿) |
Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| EN ISO 9073-9-1998 |
纺织品非织造布试验方法第9部分：悬垂系数的测定 |
Textiles - Test methods for nonwovens - Part 9: Determination of drape coefficient (ISO 9073-9:1995) |
| EN ISO 9080-2003 |
塑料管与管道系统用推断法测定热塑管型材料长期流动液体静力强度 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003) |
| EN ISO 9093-1-1997 |
小艇通海旋塞及贯穿艇体配件第1部分：金属的配件 |
Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) |
| EN ISO 9093-2-2002 |
小艇通海旋塞及贯穿艇体配件第2部分：非金属的 |
Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
| EN ISO 9094-1-2003 |
小艇防火第1部分：船长≤15米的小艇 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003) |
| EN ISO 9094-2-2002 |
小艇防火第2部分：船长〈15米的小艇 |
Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002) |
| EN ISO 9163-1998 |
纺织玻璃纤维粗纱试样的制备和浸渍粗纱拉伸强度的测定 |
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996) |
| EN ISO 9167-1-1995 |
菜籽芥子油工甙含量的测定第1部分：高效液相色谱法 |
Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performamce liquid chromatography (ISO 9167-1:1992) |
| EN ISO 9167-2-1997 |
菜籽芥子油工甙含量的测定第2部分：用X－射线荧光光谱法 |
Rapeseed - Determination of glucosinolates content - Part 2: Method using X-ray fluorescence spectrometry (ISO 9167-2:1994) |
| EN ISO 9173-1-1995 |
拔牙钳第1部分：螺钉和铰链接合型 |
Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) |
| EN ISO 9187-1-2003 |
医用注射器具第1部分：注射安瓿 |
Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2000) |
| EN ISO 9220-1994 |
金属覆盖层镀层厚度测量扫描电子显微镜法 |
Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 9222-1-1995 |
技术制图动密封应用第1部分：通用简化画法 |
Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989) |
| EN ISO 9222-2-1994 |
技术制图动密封应用第2部分：简化画法 |
Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation (ISO 9222-2:1989) |
| EN ISO 9237-1995 |
纺织品织物透气性的测定 |
Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
| EN ISO 9239-1-2002 |
地板对火反应试验第1部分：使用单辐射热源的火焰性能测定 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002) |
| EN ISO 9241-10-1996 |
办公用视觉显示终端(VDTs)的人类工效学要求第10部分：对话原理 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 10: Dialogue principles (ISO 9241-10:1996) |
| EN ISO 9241-11-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第11部分：可用性指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
| EN ISO 9241-12-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第12部分：信息表达 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998) |
| EN ISO 9241-13-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第13部分：用户指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998) |
| EN ISO 9241-14-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第14部分：菜单对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997) |
| EN ISO 9241-15-1997 |
办公用视觉显示终端(VDTs)的人类工效学要求第15部分：命令对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
| EN ISO 9241-16-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第16部分：直接处理对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues (ISO 9241-16:1999) |
| EN ISO 9241-17-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第17部分：填表对话 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998) |
| EN ISO 9241-5-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第5部分：工作台布置及位置要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) |
| EN ISO 9241-6-1999 |
办公用视觉显示终端(VDTs)的人类工效学要求第6部分：工作环境指南 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
| EN ISO 9241-7-1998 |
办公用视觉显示终端(VDTs)的人类工效学要求第7部分：反射显示 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections (ISO 9241-7:1998) |
| EN ISO 9241-8-1997 |
办公用视觉显示终端(VDTs)的人类工效学要求第8部分：显示颜色要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours (ISO 9241-8:1997) |
| EN ISO 9241-9-2000 |
办公用视觉显示终端(VDTs)的人类工效学要求第9部分：非键盘输入设备要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000) |
| EN ISO 9251-1995 |
绝热传热状态和材料特性词汇 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987) |
| EN ISO 9283-1998 |
操作型工业机器人性能标准和测试方法 |
Manipulating industrial robots - Performance criteria and related test methods (ISO 9283:1998) |
| EN ISO 9288-1996 |
绝热辐射传热物理量和定义 |
Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989) |
| EN ISO 9289-1995 |
油籽饼粕游离残留已烷的测定 |
Oilseed residues - Determination of free residual hexane (ISO 9289:1991) |
| EN ISO 9300-1995 |
用文杜利临界流量喷嘴测定气体流量 |
Measurement of gas flow means of critical flow Venturi nozzles (ISO 9300:1990) |
| EN ISO 9308-1-2000 |
水质大肠杆菌和大肠杆菌类的检测和计数第1部分：滤膜过滤法 |
Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method (ISO 9308-1:2000) |
| EN ISO 9311-2-2002 |
热塑性塑料管系统的粘合剂第2部分：切变强度的测定 |
Adhesives for thermoplastics piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002) |
| EN ISO 9312-1994 |
电阻焊设备电极挡块的绝缘柱 |
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990) |
| EN ISO 9337-1-2000 |
隐形眼镜后银顶曲光度的测定第1部分：用焦距计人工调焦的方法 |
Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing (ISO 9337-1:1999) |
| EN ISO 9337-2-2004 |
接触镜片.后屈光度的测定.第2部分:在盐中浸渍的接触镜片的测量 |
|
| EN ISO 9338-1998 |
光学和光学仪器隐形眼镜直径的测定 |
Optics and optical instruments - Contact lenses - Determination of the diameters (ISO 9338:1996) |
| EN ISO 9339-1-1998 |
光学和光学仪器隐形眼镜厚度测定第1部分：固定隐形眼镜 |
Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses (ISO 9339-1:1996) |
| EN ISO 9340-1998 |
光学和光学仪器隐形眼镜固定隐形眼镜的应力测定 |
Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses (ISO 9340:1996) |
| EN ISO 9341-1998 |
光学和光学仪器隐形眼镜固定隐形眼镜中夹杂物和表面不完备性的测定 |
Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses (ISO 9341:1996) |
| EN ISO 9342-1998 |
光学和光学仪器焦距计校正用检验镜头 |
Optics and optical instruments - Test lenses for calibration of focimeters (ISO 9342:1996) |
| EN ISO 9346-1996 |
绝热传质物理量和定义 |
Thermal insulation - Mass transfer - Physical quantities and definitions (ISO 9346:1987) |
| EN ISO 9360-1-2000 |
麻醉和呼吸设备用于加湿人的呼吸气体的热湿交换器(HMEs)第1部分：与250ml最小潮量一起使用的热湿交换器 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
| EN ISO 9360-2-2002 |
麻醉和呼吸设备用于加湿人的呼吸气体的热湿交换器(HMEs)第2部分：最小落差容量为250ml的气管造口病人用 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001) |
| EN ISO 9363-1-1999 |
光学与光学仪器隐形眼镜隐形眼镜材料致癌的测定第1部分：琼脂用作细菌固体培养基中的支持物的免疫扩 |
Optics and optical instruments - Contact lenses - Determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test (ISO 9363-1:1994) |
| EN ISO 9377-2-2000 |
水质烃油指数的测定第2部分：溶剂萃取法与气相色谱分析法 |
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction an gas chromatography (ISO 9377-2:2000) |
| EN ISO 9391-1995 |
水质深水中大型无脊椎生物的采样群落法定性和定量采样器使用方法指南 |
Water quality - Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers (ISO 9391:1993) |
| EN ISO 9394-1998 |
眼科光学接触镜与接触镜保护产品用兔眼视觉研究法测定生物相容性 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study using rabbit eyes (ISO 9394:1998) |
| EN ISO 9396-2000 |
塑料酚醛树脂用自动装置在给定温度下对凝胶时间的测定 |
Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997) |
| EN ISO 9397-1997 |
塑料酚醛树脂 游离甲醛含量的测定盐酸胲法 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995) |
| EN ISO 9400-1995 |
镍基合金抗晶间腐蚀性的测定 |
Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990) |
| EN ISO 9408-1999 |
水质通过在密闭的透气性测定器中需氧量的测定来评定有机化合物在水介质中的最大需氧生物降解能力的方法 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999) |
| EN ISO 9409-1-2004 |
操作型工业机器人.机械接口.第1部分:板 |
|
| EN ISO 9409-2-2003 |
操作型工业机器人机械接口第2部分：轴型 |
Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (ISO 9409-2:2002) |
| EN ISO 9431-1999 |
建筑工程制图图样说明纸和标题栏的位置 |
Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets (ISO 9431:1990) |
| EN ISO 9439-2000 |
水质水介质中有机化合物最终有氧生物降解能力的评价二氧化碳变化试验 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999) |
| EN ISO 945-1994 |
铸铁 石墨显微组织的分类 |
Cast iron - Designation of microstructure of graphite (ISO 945:1975) |
| EN ISO 9454-2-2000 |
软钎焊剂分类和要求第2部分：性能要求 |
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998) |
| EN ISO 9455-10-2000 |
软钎焊剂试验方法第10部分：钎剂功效试验、钎料辅展性试验 |
Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method (ISO 9455-10:1998) |
| EN ISO 9455-12-1994 |
软钎焊剂试验方法第12部分：钢管腐蚀试验 |
Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992) |
| EN ISO 9455-13-1999 |
软钎焊剂试验方法第13部分：钎剂飞溅量的测定 |
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996) |
| EN ISO 9455-15-1999 |
软钎焊剂试验方法第15部分：铜腐蚀试验 |
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:1996) |
| EN ISO 9455-16-2001 |
软钎焊剂试验方法第16部分：钎剂功效试验、湿平衡法 |
Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method (ISO 9455-16:1998) |
| EN ISO 9455-2-1995 |
软钎焊剂试验方法第2部分：不挥发物的测定、沸点测定法 |
Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993) |
| EN ISO 9455-6-1997 |
软钎焊剂试验方法第6部分：卤化物(不包括氟化物)的含量测定 |
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:1995) |
| EN ISO 9455-9-1995 |
软钎焊剂试验方法第9部分：氨含量测定 |
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:1993) |
| EN ISO 9456-1996 |
光学和光学仪器眼科光学眼镜架标志 |
Optics and optical instruments - Ophthalmic optics - Marking of spectacle frames (ISO 9456:1991) |
| EN ISO 9488-1999 |
太阳能词汇 |
Solar energy - Vocabulary (ISO 9488:1999) |
| EN ISO 9509-1995 |
水质评价化学药品和污水对活性污泥中微生物硝化抑制作用的方法 |
Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water (ISO 9509:1989) |
| EN ISO 9513-2002 |
金属材料抗拉试验第4部分：单轴试验用的变形测定仪的检准 |
Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999) |
| EN ISO 9514-1994 |
色漆和清漆液态体系适用期测定样品的制备和处理以及试验指南 |
Paints and varnishes - Determination of the pot-life of liquid systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:1992) |
| EN ISO 9556-2001 |
钢和铁全碳量的测定电感应炉中燃烧后红外线吸收法 |
Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989) |
| EN ISO 9562-2004 |
水质.可吸附卤素(AOX)的测定 |
|
| EN ISO 960-1997 |
塑料聚酰胺(PA)水含量的测定 |
Plastics - Polyamides (PA) - Determination of water content (ISO 960:1988) |
| EN ISO 9606-3-1999 |
焊工的认可试验熔焊第3部分：铜和铜合金 |
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
| EN ISO 9606-4-1999 |
焊工的认可试验熔焊第4部分：镍及镍合金 |
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
| EN ISO 9606-5-2000 |
焊工的认可试验熔焊第5部分：钛及钛合金、锆和锆合金 |
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
| EN ISO 9614-1-1995 |
声学声强法测定噪声源声功率级第1部分：离散点测量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN ISO 9614-2-1996 |
声学声强法测定噪声源声功率级第2部分：扫描测量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN ISO 9614-3-2002 |
声学声强法测定噪声源声功率级第3部分：扫描测量的精确方法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| EN ISO 9653-2000 |
粘合剂粘合件剪切冲击强度测定方法 |
Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998) |
| EN ISO 9664-1995 |
粘合剂拉伸剪切胶粘件疲劳性能的试验方法 |
Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993) |
| EN ISO 9665-2000 |
粘合剂动物胶取样和试验方法 |
Adhesives - Animal glues - Methods of sampling and testing (ISO 9665:1998) |
| EN ISO 9680-1996 |
牙科工作灯(包括技术勘误1) |
Dental operating light (ISO 9680:1993 including Technical Corrigendum 1:1995) |
| EN ISO 9687-1995 |
牙科设备图形符号 |
Dental equipment - Graphical symbols (ISO 9687:1993) |
| EN ISO 9692-2-1998 |
焊接和相关工艺接头的制备第2部分：钢的埋弧焊 |
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) |
| EN ISO 9692-3-2001 |
焊接和相关工艺接头制备的建议第3部分：铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 |
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| EN ISO 9692-4-2003 |
焊接和相关工艺接头制备的建议第4部分：复合钢 |
Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003) |
| EN ISO 9693-2000 |
牙科金属烤瓷修复系统 |
Metal-ceramic dental restorative systems (ISO 9693:1999) |
| EN ISO 9694-1998 |
牙科磷酸盐结合剂铸造包埋材料 |
Dental phosphate-bonded casting investments (ISO 9694:1996) |
| EN ISO 9702-1998 |
塑料胺类环氧固化剂伯、仲和叔胺基团氨含量的测定 |
Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996) |
| EN ISO 9703-3-1998 |
麻醉和呼吸护理报警信号第3部分：警报应用指南 |
Anaesthesia and respiratory care alarm signals - Part 3: Guidance on application of alarms (ISO 9703-3:1998) |
| EN ISO 9706-1998 |
信息和文献文件用纸耐用性要求 |
Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| EN ISO 9707-1994 |
信息和文献图书、报纸、期刊和电子出版物的生产和销售统计表 |
Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications (ISO 9707:1991) |
| EN ISO 9713-2004 |
神经外科植入物.自锁颅内动脉瘤夹钳 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com