标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 3651-1-1998 |
不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.用测量质量损失的办法进行硝酸中的腐蚀试验(晶间腐蚀试验) |
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German v |
| DIN EN ISO 3651-2-1998 |
不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.在含硫酸介质中进行腐蚀试验 |
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2: |
| DIN EN ISO 3656-2002 |
动植物脂肪和油.以特定的紫外线消光系数表示的紫外线吸收率的测定 |
Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2002); German version EN ISO 3656:2002 |
| DIN EN ISO 3668-2001 |
涂料和清漆.涂料颜色的外观比较 |
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998); German version EN ISO 3668:2001 |
| DIN EN ISO 3671-1998 |
塑料.氨基塑料模塑材料.挥发性物质的测定 |
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 |
| DIN EN ISO 3672-1-2002 |
塑料.未饱和的聚酯树脂.第1部分:命名体系 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000); German version EN ISO 3672-1:2001 |
| DIN EN ISO 3672-2-2002 |
塑料.未饱和的聚酯树脂.第2部分:试样制备和特性测定 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001 |
| DIN EN ISO 3673-1-1999 |
塑料.环氧树脂.第1部分:名称与符号 |
Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999 |
| DIN EN ISO 3673-2-2000 |
塑料.环氧树脂.第2部分:试验样品制备和特性测定 |
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999 |
| DIN EN ISO 3675-1999 |
原油和液体石油产品.密度或相对密度的实验室测定.石油密度计法 |
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998); German version EN ISO 3675:1998 |
| DIN EN ISO 3677-1995 |
软钎焊,铜焊和硬钎焊接用填充金属.命名 |
Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992); German version EN ISO 3677:1995 |
| DIN EN ISO 3678-1995 |
色漆和清漆.无印痕试验 |
Paints and varnishes - Print-free test (ISO 3678:1976); German version EN ISO 3678:1995 |
| DIN EN ISO 3679-2004 |
闪点的测定.快速平衡闭杯法 |
|
| DIN EN ISO 3680-2004 |
闪和非闪测定.快速平衡闭杯法 |
|
| DIN EN ISO 3681-1998 |
色漆和清漆用粘合剂.皂化值的测定.滴定法 |
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:1996); German version EN ISO 3681:1998 |
| DIN EN ISO 3690-2001 |
焊接及相关工艺.电弧焊接含铁金属中氢含量的测定 |
Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO/DIS 3690:2000); German version EN ISO 3690:2000 |
| DIN EN ISO 3715-1-2004 |
船舶和海上技术.船舶用推进装置.推进器的几何学词汇 |
|
| DIN EN ISO 3715-2-2003 |
船舶和海上技术.船舶用推进器设备.第2部分:可变距推进器设备用词汇 |
Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001); German version EN ISO 3715-2:2002 |
| DIN EN ISO 3727-1-2002 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.第1部分:含水量的测定(基准方法) |
Butter - Determination of moisture, non-fat solids and fat contents - Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001); German version EN ISO 3727-1:2001 |
| DIN EN ISO 3727-2-2002 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.第2部分:非脂肪固体含量的测定(基准方法) |
Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001); German version EN ISO 3727-2:2001 |
| DIN EN ISO 3727-3-2003 |
黄油.含水量、非脂肪固体含量和脂肪含量的测定.第3部分:脂肪含量的计算 |
(Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content (ISO 3727-3:2003); German version EN ISO 3727-3:2003) |
| DIN EN ISO 3735-1999 |
原油和燃料油.沉积物的测定.萃取法 |
Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735-1999); German version EN ISO 3735:1999 |
| DIN EN ISO 3740-2001 |
声学.噪声源音响功率级的测定.基础标准使用指南 |
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000); German version EN ISO 3740:2000 |
| DIN EN ISO 3741 Berichtigung 1-2002 |
对DIN EN ISO 3741:2001-01的勘误 |
Corrigenda to DIN EN ISO 3741:2001-01 (EN ISO 3741:1999/AC:2002) |
| DIN EN ISO 3741-2001 |
声学.用声压法测定噪声源声级.混响室用精确方法(ISO 3741:1999) |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999); German version EN ISO 3741:1999 |
| DIN EN ISO 3743-1-1995 |
声学.噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法.第1部分:硬墙试验室的比较分析法 |
Acoustics - Determination of sound power levels of noise sources; engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994); German version EN ISO 3743-1:1995 |
| DIN EN ISO 3743-2-1996 |
声学.利用声压对噪声源混响场噪声源声功率级的测定.在混响场中对小声源,可移动声源的工程测量方法.第2部分:用专用混响试验室的测量方法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994); German version EN ISO 37 |
| DIN EN ISO 3744-1995 |
声学.噪声源音响功率级的测定.反射平面上基本自由声场用2级精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essential free field over a reflecting plane (ISO 3744:1994); German version EN ISO 3744:1995 |
| DIN EN ISO 3745-2004 |
声学.利用声压测定噪声源的声功率级.消声室和半消声室的精确方法 |
|
| DIN EN ISO 3746-1995 |
声学.声压测量产生的噪音源的声功率级测定.反射平面上3级精度包面法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995); German version EN ISO 3746:1995 |
| DIN EN ISO 3747-2001 |
声学.用声压测定噪声源的声级 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000); German version EN ISO 3747:2000 |
| DIN EN ISO 3759-1995 |
纺织品.测定尺寸变化试验用织物样品和服装的制备、标记和测量 |
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:1994); German version EN ISO 3759:1995 |
| DIN EN ISO 376-2003 |
金属材料.单轴向试验机验证用作用力检验仪的校准 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:1999); German version EN ISO 376:2002 |
| DIN EN ISO 376-2005 |
金属材料.单轴向试验机验证用作用力检验仪的校准 |
|
| DIN EN ISO 3766 Berichtigung 1-2005 |
对DIN EN ISO 3766-2004的勘误 |
|
| DIN EN ISO 3766-2004 |
建筑工程制图.钢筋混凝土的简化画法 |
|
| DIN EN ISO 377-1997 |
钢和钢产品.机械试验用试样和试件的定位与制备 |
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997); German version EN ISO 377:1997 |
| DIN EN ISO 3785-1995 |
钢.试件轴线的规定 |
Steel - Designation of test piece axes (ISO 3785:1976); German version EN ISO 3785:1995 |
| DIN EN ISO 3796-2002 |
船舶和航海技术.外开单扇门的净宽 |
Ships and marine technology - Clear openings for external single-leaf doors (ISO 3796:1999); German version EN ISO 3796:2001 |
| DIN EN ISO 3815-2-2005 |
锌和锌合金.第2部分:用感应耦合等离子体光辐射光谱测定法分析 |
|
| DIN EN ISO 3822-1-1999 |
声学.试验室中检验供水设备上管件和装置中发出的噪声的性质.第1部分:测量方法 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999); German version EN ISO 3822-1:1999 |
| DIN EN ISO 3822-2-1995 |
声学.由供水设施和设备发出噪音的实验室试验.第2部分:放水龙头和混合电池的安装和工作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995); German version EN ISO 3822-2:1995 |
| DIN EN ISO 3822-3-1997 |
声学.在实验室里检测供水站使用的装置和设备发出的燥音的特性.第3部分:管线上用的管件的连接和操作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997 |
| DIN EN ISO 3822-4-1997 |
声学.在实验室里检测供水站使用的装置和设备发出的燥音的特性.第4部分:特殊管件用连接和操作条件 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997 |
| DIN EN ISO 3823-1-1999 |
牙科用旋转器械.牙钻.第1部分:钢制牙钻和硬质合金牙钻 |
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997); German version EN ISO 3823-1:1998 |
| DIN EN ISO 3826-1-2004 |
人体血液和血液成分用折式塑料容器.第1部分:常规容器 |
|
| DIN EN ISO 3830-1995 |
石油产品.汽油中铅含量的测定.一氯化碘法 |
Petroleum products - Determination of lead content of gasoline - Iodine monochlorid method (ISO 3830:1993); German version EN ISO 3830:1995 |
| DIN EN ISO 3838-1995 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞阻比重瓶法和带刻度双毛细菅比重瓶法 |
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:1983); German version EN ISO 3838:1995 |
| DIN EN ISO 3838-2004 |
原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法 |
|
| DIN EN ISO 3861-1997 |
喷砂用橡胶软管.要求 |
Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 |
| DIN EN ISO 3868-1995 |
金属和其他无机物涂层.涂层厚度的测量.菲索(Fizeau)多光束干涉仪法 |
Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976); German version EN ISO 3868:1994 |
| DIN EN ISO 3882-1995 |
金属和其他无机物涂层.厚度测量方法述评 |
Metallic and other non-organic coatings - Review of methods of measurement of thickness (ISO 3882:1986); German version EN ISO 3882:1994 |
| DIN EN ISO 389-1-2000 |
声学.音响设备校正用参考零点.第1部分:纯音和耳挂式耳机用参考等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent treshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998); German version EN ISO 389-1:2000 |
| DIN EN ISO 389-2-1996 |
声学.音响设备校正标准参考零点.第2部分:纯音和插入式耳机用参考等效最低限度声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994); German version EN ISO 389-2:1996 |
| DIN EN ISO 389-3-1999 |
声学.音响设备校正标准参考零点.第3部分:纯音和骨传导耳机用参考等效极限声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 389-3:1998 |
| DIN EN ISO 389-4-1999 |
声学.音响设备校正标准参考零点.第4部分:窄带遮敝噪声用参考声级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994); German version EN ISO 389-4:1998 |
| DIN EN ISO 389-5-2000 |
声学.听力测定设备校正参考零点.频率范围8kHz-16kHz的纯音参考相等的阈值声音压力水平 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequence range 8 kHz to 16 kHz (ISO/TR 389-5:1998); German version EN ISO 389-5:1999 |
| DIN EN ISO 389-7-1998 |
声学.音响设备的校正标准基准水平.第7部分:自由声波场和扩散声场条件下的基准听觉阈 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:1996); German version EN ISO 389-7:1998 |
| DIN EN ISO 389-8-2004 |
声学.校准听力设备的基准零级.第8部分:纯音和环绕式耳机的基准等效阈声压级 |
|
| DIN EN ISO 3892-2001 |
金属材料的转化涂层.单位面积涂层质量的测定.重量分析法 |
Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001 |
| DIN EN ISO 3915-1999 |
塑料.导电塑料电阻率的测量 |
Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999 |
| DIN EN ISO 3927-2002 |
金属粉末(不包括硬质合金粉末).单轴向压缩时压塑性(压缩性)的测定 |
Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001); German version EN ISO 3927:2001 |
| DIN EN ISO 3947-1994 |
天然或加工淀粉.脂肪总含量的测定 |
Starches, native or modified - Determination of total fat content (ISO 3947:1977); German version EN ISO 3947:1994 |
| DIN EN ISO 3950-1997 |
牙科学.牙齿和口腔区的名称体系 |
Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995); German version EN ISO 3950:1997 |
| DIN EN ISO 3961-1999 |
动植物脂肪和油.碘值的测定 |
Animal and vegetable fats and oils - Determination of iodine value (ISO 3961:1996); German version EN ISO 3961:1999 |
| DIN EN ISO 3977-5-2003 |
燃气轮机.采购.第5部分:石油和天然气工业的应用 |
Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003 |
| DIN EN ISO 3993-1995 |
液化石油气和轻质烃类.密度或相对密度的测定.压力石油密度计法 |
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995 |
| DIN EN ISO 3994-2000 |
塑料软管.含水物质的抽吸和排放用螺旋热塑强化的热塑塑料软管.规范 |
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 |
| DIN EN ISO 4014-2001 |
六角头螺栓.产品等级A和B |
Hexagon head bolts - Product grades A and B (ISO 4014:1999); German version EN ISO 4014:2000 |
| DIN EN ISO 4016-2001 |
六角头螺栓.产品等级C |
Hexagon head bolts - Product grade C (ISO 4016:1999); German version EN ISO 4016:2000 |
| DIN EN ISO 4017-2001 |
六角头螺钉.产品等级A和B |
Hexagon head screws - Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000 |
| DIN EN ISO 4018-2001 |
六角头螺钉.产品等级C |
Hexagon head screws - Product grade C (ISO 4018:1999); German version EN ISO 4018:2000 |
| DIN EN ISO 4023-1995 |
蒸汽用橡胶软管.试验方法 |
Rubber hoses for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995 |
| DIN EN ISO 4026-2004 |
内六角平端紧定螺钉 |
|
| DIN EN ISO 4027-2004 |
内六角锥端紧定螺钉 |
|
| DIN EN ISO 4028-2004 |
内六角圆柱端紧定螺钉 |
|
| DIN EN ISO 4029-2004 |
内六角凹端紧定螺钉 |
|
| DIN EN ISO 4032-2001 |
1型六角螺母.产品等级A和B |
Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999); German version EN ISO 4032:2000 |
| DIN EN ISO 4033-2001 |
2型六角螺母.产品等级A和B |
Hexagon nuts, style 2 - Product grades A and B (ISO 4033:1999); German version EN ISO 4033:2000 |
| DIN EN ISO 4034-2001 |
六角螺母.产品等级C |
Hexagon nuts - Product grade C (ISO 4034:1999); German version EN ISO 4034:2000 |
| DIN EN ISO 4035-2001 |
六角薄螺母(倒角).产品等级A和B |
Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1999); German version EN ISO 4035:2000 |
| DIN EN ISO 4036-2001 |
六角薄螺母(不倒角).产品等级B |
Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999); German version EN ISO 4036:2000 |
| DIN EN ISO 4042-2001 |
紧固件.电解涂层(ISO 4042:1999) |
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 |
| DIN EN ISO 4044-1998 |
皮革.化学试验用试样的制备 |
Leather - Preparation of chemical test samples (ISO 4044:1977); German version EN ISO 4044:1998 |
| DIN EN ISO 4045-1998 |
皮革.pH值的测定 |
Leather - Determination of pH (ISO 4045:1977); German version EN ISO 4045:1998 |
| DIN EN ISO 4047-1998 |
皮革.硫酸化总灰分和硫酸化不溶于水灰分的测定 |
Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977); German version EN ISO 4047:1998 |
| DIN EN ISO 4048-1998 |
皮革.溶解在二氯甲烷中的物质的测定 |
Leather - Determination of matter soluble in dichloromethane (ISO 4048:1977); German version EN ISO 4048:1998 |
| DIN EN ISO 4049-2001 |
牙科学.可复原的封胶材料制成的聚脂填充物 |
Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000); German version EN ISO 4049:2000 |
| DIN EN ISO 4063-2000 |
焊接及有关工艺.工艺和参考值的命名 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998); German version EN ISO 4063:2000 |
| DIN EN ISO 407-2005 |
小型医用气瓶.针导轭式阀连接 |
|
| DIN EN ISO 4073-2005 |
牙科设备.牙科治疗室设备项目.识别体系 |
|
| DIN EN ISO 4074-2002 |
天然橡胶阴茎套的要求和试验方法 |
Natural latex condoms - Requirements and test methods (ISO 4074:2002); German version EN ISO 4074:2002 |
| DIN EN ISO 4080-1995 |
橡胶和塑料软管及软管组件.透气性测定 |
Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995 |
| DIN EN ISO 4090-2004 |
摄影.医用射线摄影盒式磁带/屏幕/胶片和硬拷贝成像胶片.尺寸和规范 |
|
| DIN EN ISO 4119-1996 |
纸浆.浆料浓度的测定 |
Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996 |
| DIN EN ISO 4126-1-2004 |
过压保护安全设备.第1部分:安全阀 |
|
| DIN EN ISO 4126-2-2003 |
过压保护安全设备.第2部分:防爆板安全设备 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003); German version EN ISO 4126-2:2003 |
| DIN EN ISO 4126-4-2004 |
过压保护安全设备.第4部分:安全操作导阀 |
|
| DIN EN ISO 4126-5-2004 |
过压保护安全设备.第5部分:可控安全减压系统 |
|
| DIN EN ISO 4126-6-2004 |
过压保护安全设备.第6部分:安全隔板的应用、选择和安装 |
|
| DIN EN ISO 4126-7-2004 |
过压保护安全设备.第7部分:通用数据 |
|
| DIN EN ISO 4135-2002 |
麻醉和呼吸设备.词汇 |
Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
| DIN EN ISO 4142-2003 |
实验室玻璃器皿.试管 |
Laboratory glassware - Test tubes (ISO 4142:2002); German version EN ISO 4142:2002 |
| DIN EN ISO 4157-1-1999 |
建筑用图纸.制图系统.第1部分:建筑物和建筑部分 |
Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998); German version EN ISO 4257-1:1998 |
| DIN EN ISO 4157-2-1999 |
建筑用图纸.制图系统.第2部分:房间名称与号码 |
Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998); German version EN ISO 4157-2:1998 |
| DIN EN ISO 4157-3-1999 |
建筑用图纸.制图系统.第3部分:房间标识 |
Construction drawings - Designation systems - Part 3: Room identifiers (ISO 4157-3:1998); German version EN ISO 4157-3:1998 |
| DIN EN ISO 4165-2004 |
道路车辆.电气连接.双极连接 |
|
| DIN EN ISO 4256-1999 |
液化石油气.蒸汽压力的测定.液化石油气法 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998 |
| DIN EN ISO 4257-2002 |
液化石油气.取样方法 |
Liquefied petroleum gases - Method of sampling (ISO 4257:2001); German version EN ISO 4257:2001 |
| DIN EN ISO 4259-1996 |
石油产品.试验方法精度用数值的测定和应用 |
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:1992 + Cor 1:1993); German version EN ISO 4259:1995 |
| DIN EN ISO 4264-1996 |
石油产品.用四个可变等式法对柴油燃料十六烷指数的计算 |
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995); German version EN ISO 4264:1996 |
| DIN EN ISO 4267-2-1996 |
石油和液体石油制品.油量的计算.第2部分:动态测量 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988); German version EN ISO 4267-2:1995 |
| DIN EN ISO 4287-1998 |
几何产品规范(GPS).表面结构:轮廓法.术语,定义和表面结构的参数 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997); German version EN ISO 4287:1998 |
| DIN EN ISO 4288-1998 |
几何制品规范(GPS).表面构造:断面法.表面构造评估的规则和程序 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996); German version EN ISO 4288:1997 |
| DIN EN ISO 4320-1997 |
非离子表面活性剂.浊点指数的测定.容量法 |
Non-ionic surface active agents - Determination of cloud point-index - Volumetric method (ISO 4320:1977, including Erratum:1980); German version EN ISO 4320:1997 |
| DIN EN ISO 4375-2004 |
水文测验.河流测量用索道系统 |
|
| DIN EN ISO 445-1998 |
物料装卸用托盘.词汇 |
Pallets for materials handling - Vocabulary (ISO 445:1996); German version EN ISO 445:1998 |
| DIN EN ISO 449-1999 |
船舶和航海技术.磁罗盘,罗盘座和方位判读装置.A级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A (ISO 449:1997); German version EN ISO 449:1999 |
| DIN EN ISO 4490-2002 |
金属粉末.用校准漏斗(霍尔流量计)测定流动时间 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001); German version EN ISO 4490:2001 |
| DIN EN ISO 4516-2002 |
金属和其他无机镀层.维氏硬度计和努氏显微硬度试验机 |
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com