标准号 |
中文名称 |
英文名称 |
| ISO 17699-2003 |
鞋靴.鞋帮及鞋衬的试验方法.水蒸气的渗透性和吸收性 |
(ootwear - Test methods for uppers and lining - Water vapour permeability and absorption) |
| ISO 17699-2003 |
鞋靴.鞋帮及鞋衬的试验方法.水蒸气的渗透性和吸收性 |
|
| ISO 177-1988 |
塑料.增塑剂扩散的测定 |
Plastics; determination of migration of plasticizers |
| ISO 1770 AMD 1-1983 |
第1次修改 |
Solid-stem general purpose thermometers; amendment 1 |
| ISO 1770-1981 |
一般用途固体杆式温度计 |
Solid-stem general purpose thermometers |
| ISO 17700-2004 |
鞋靴.鞋帮、鞋衬和鞋内衬试验方法.耐摩擦色牢度 |
|
| ISO 17700-2004 |
鞋靴.鞋帮、鞋衬和鞋内衬试验方法.耐摩擦色牢度 |
|
| ISO 17700-2004 |
鞋靴.鞋帮、鞋衬和鞋内衬试验方法.耐摩擦色牢度 |
|
| ISO 17701-2003 |
鞋靴.鞋帮、鞋衬和内垫的试验方法.色移 |
(Footwear - Test methods for uppers, lining and insocks - Colour migration) |
| ISO 17701-2003 |
鞋靴.鞋帮、鞋衬和内垫的试验方法.色移 |
|
| ISO 17702-2003 |
鞋靴.鞋帮的试验方法.防水性 |
(Footwear - Test methods for uppers - Water resistance) |
| ISO 17702-2003 |
鞋靴.鞋帮的试验方法.防水性 |
|
| ISO 17703-2003 |
鞋靴.鞋帮的试验方法.高温特性 |
(Footwear - Test methods for uppers - High temperature behaviour) |
| ISO 17703-2003 |
鞋靴.鞋帮的试验方法.高温特性 |
|
| ISO 17704-2004 |
鞋靴.鞋帮、鞋衬和鞋内衬试验方法.耐磨性 |
|
| ISO 17705-2003 |
鞋靴.鞋帮、鞋衬和内垫的试验方法.隔热性 |
(Footwear - Test methods for uppers, lining and insocks - Thermal insulation) |
| ISO 17705-2003 |
鞋靴.鞋帮、鞋衬和内垫的试验方法.隔热性 |
|
| ISO 17706-2003 |
鞋靴.鞋帮的试验方法.抗拉强度和伸长度 |
(Footwear - Test methods for uppers - Tensile strength and elongation) |
| ISO 17706-2003 |
鞋靴.鞋帮的试验方法.抗拉强度和伸长度 |
|
| ISO 17708-2003 |
鞋靴.整鞋的试验方法.外鞋底的附着力 |
(Footwear - Test methods for whole shoe - Upper sole adhesion) |
| ISO 17708-2003 |
鞋靴.整鞋的试验方法.外鞋底的附着力 |
|
| ISO 17709-2004 |
鞋靴.样品和试件的调节时间、取样位置和制备 |
|
| ISO 1771 AMD 1-1983 |
第1次修改 |
Enclosed-scale general purpose thermometers; amendment 1 |
| ISO 1771-1981 |
一般用途封闭式标度温度计 |
Enclosed-scale general purpose thermometers |
| ISO 17710-2002 |
塑料.用微量滴法对聚亚胺酯生产中用的多醇不饱和度的测定 |
Plastics - Polyols for use in the production of polyurethane - Determination of degree of unsaturation by microtitration |
| ISO 1772-1975 |
实验室用瓷坩埚和二氧化硅坩埚 |
Laboratory crucibles in porcelain and silica |
| ISO 17724-2003 |
图形符号.词汇 |
(Graphical symbols - Vocabulary) |
| ISO 17724-2003 |
图形符号.词汇 |
|
| ISO 1773-1997 |
实验室玻璃器皿.细颈烧瓶 |
Laboratory glassware - Narrow-necked boiling flasks |
| ISO 17733-2004 |
车间空气.汞和无机汞化合物的测定.低温蒸气原子吸收分光光度测定法或原子荧光分光光度测定法 |
|
| ISO 17733-2004 |
车间空气.汞和无机汞化合物的测定.低温蒸气原子吸收分光光度测定法或原子荧光分光光度测定法 |
|
| ISO 17744-2004 |
塑料.作为温度和压力函数的比容的测定(pvT图).活塞装置法 |
|
| ISO 1775-1975 |
实验室瓷制器具.要求和试验方法 |
Porcelain laboratory apparatus; Requirements and methods of test |
| ISO 1776-1985 |
玻璃.在100 ℃耐盐酸腐蚀性.火焰反射或火焰原子吸收光谱测定法 |
Glass; Resistance to attack by hydrochloric acid at 100 degrees C; Flame emission or flame atomic absorption spectrometric method |
| ISO 17771-2003 |
塑料.热固性模塑料.片状成型料(SMC)中玻璃纤维浸润度的测定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC) |
| ISO 17771-2003 |
塑料.热固性模塑料.片状成型料(SMC)中玻璃纤维浸润度的测定 |
|
| ISO 17776-2000 |
石油和天然气工业.海上生产装置.危险识别和风险评定用工具和技术的指南 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment |
| ISO 178 AMD 1-2004 |
塑料.弯曲性能测定.修改件1:精密度说明 |
|
| ISO 178 AMD 1-2004 |
塑料.弯曲性能测定.修改件1:精密度说明 |
|
| ISO 178 AMD 1-2004 |
塑料.弯曲性能测定.修改件1:精密度说明 |
|
| ISO 178-2001 |
塑料.弯曲性能测定 |
Plastics - Determination of flexural properties |
| ISO 1780-1984 |
电影摄影.8mm S-1型电影摄影机胶片盒.片窗、摄影机片窗形式、胶片位置和压板及压板平直度.尺寸和规范 |
Cinematography; Motion-picture camera cartridge, 8 mm Type S Model I; Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness; Dimensions and specifications |
| ISO 1781-1983 |
电影摄影.直接正面放映的8mmS型电影胶片放映机的用法 |
Cinematography; Projector usage of 8 mm Type S motion-picture film for direct front projection |
| ISO 1783-1973 |
镁合金.锌的测定.容量法 |
Magnesium alloys; Determination of zinc; Volumetric method |
| ISO 17834-2003 |
热喷涂.高温下抗腐蚀耐氧化保护涂层 |
|
| ISO 17836-2004 |
热喷涂.热喷涂熔敷效率的测定 |
|
| ISO 1784-1976 |
铝合金.锌含量的测定.乙二胺四乙酸滴定法 |
Aluminium alloys; Determination of zinc; EDTA titrimetric method |
| ISO 17846-2004 |
焊接及相关工艺.健康和安全.电弧焊接和切割用设备和消耗品的无字预警标签 |
|
| ISO 1785-1983 |
电影技术.在穿孔8mm S(1-4)型的16mm电影胶片上拷贝的8mm,S型影象区.位置和尺寸 |
Cinematography; Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4); Position and dimensions |
| ISO 17853 Technical Corrigendum 1-2004 |
植入物材料的磨损.聚酯和金属磨损粒子.离析、表征和量化.技术勘误1 |
|
| ISO 17853-2003 |
植入材料的磨损.聚酯和金属磨损粒子.离析、表征和量化 |
(Wear of implant materials - Polymer and metal wear particles - Isolation, chacterization and quantification) |
| ISO 17853-2003 |
植入材料的磨损.聚酯和金属磨损粒子.离析、表征和量化 |
|
| ISO 1787-1984 |
电影技术.8mm S型电影胶片电影摄影机的用法.规范 |
Cinematography; Camera usage of 8 mm Type S motion-picture film; Specifications |
| ISO 17873-2004 |
核设施.除核反应堆之外的核装置用通风系统的设计和运行标准 |
|
| ISO 17874-1-2004 |
放射性物质用遥控装卸设备.第1部分:一般要求 |
|
| ISO 17874-2-2004 |
放射性物质用遥控装卸设备.第2部分:仿效机械手 |
|
| ISO 17884-2004 |
船舶和海上技术.快艇用探照灯 |
|
| ISO 17893-2004 |
钢丝绳.词汇、名称与符号及分类 |
|
| ISO 17899-2004 |
船舶和海上技术.船用电挡风玻璃刮水器 |
|
| ISO 179-1-2000 |
塑料.摆式冲击性能的测定.第1部分:无损冲击试验 |
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test |
| ISO 179-2 Technical Corrigendum 1-1998 |
塑料.摆锤式冲击特性的测定.第2部分:仪器冲击试验.技术勘误1 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test; Technical Corrigendum 1 |
| ISO 179-2-1997 |
塑料.摆锤式冲击特性的测定.第2部分:仪器冲击试验 |
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test |
| ISO 17900-2002 |
农用挂车.带平衡装置的半悬挂式挂车.有效负载,垂直静止负载及轴载的测定 |
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| ISO 1791-1983 |
建筑结构.模数协调.词汇.两种语言版 |
Building construction; Modular co-ordination; Vocabulary Bilingual edition |
| ISO 17925-2004 |
钢上锌和/或铝基涂层.单位面积涂层质量和化学组分的测定.重量分析法、感应耦合等离子体原子辐射光谱测定法和火焰原子吸收光谱测定法 |
|
| ISO 1793-1975 |
电影技术.16mm电影放映机用片盒(容量可达120m:尺寸18cm).尺寸 |
Cinematography; Reels for 16 mm motion-picture projectors (up to and including 120 m capacity : 18 cm size); Dimensions |
| ISO 17933-2000 |
GEDI.通用电子文件交换 |
GEDI - Generic Electronic Document Interchange |
| ISO 1795-2000 |
生橡胶、天然橡胶和合成橡胶.取样和样品制备规程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
| ISO 1795-2000 |
生橡胶、天然橡胶和合成橡胶.取样和样品制备规程 |
Rubber, raw natural and raw synthetic - Sampling and further preparative procedures |
| ISO 1797-1 AMD 1-1997 |
牙科用旋转器械.柄.第1部分:金属柄.补充件1 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals; Amendment 1 |
| ISO 1797-1-1992 |
牙科用旋转器械.柄.第1部分:金属柄 |
Dental rotary instruments; shanks; part 1: shanks made of metals |
| ISO 1797-2-1992 |
牙科用旋转器械.柄.第2部分:塑料柄 |
Dental rotary instruments; shanks; part 2: shanks made of plastics |
| ISO 17973-2002 |
表面化学分析.中分辨率螺旋电子光谱仪.素分析用能量标度的校准 |
Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis |
| ISO 17974-2002 |
表面化学分析.高分辨率螺旋电子光谱仪.素和化学状态分析用能量标度的校准 |
Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis |
| ISO 1798 Technical Corrigendum 1-2003 |
软质泡沫聚合材料.拉伸强度和断裂伸长率的测定 术勘误1 |
(Flexible cellular polymeric materials - Determination of tensile strength and elongation at break; Technical Corrigendum 1 ) |
| ISO 1798 Technical Corrigendum 1-2003 |
软质泡沫聚合材料.拉伸强度和断裂伸长率的测定 术勘误1 |
|
| ISO 1798-1997 |
柔性泡沫聚合材料.拉力强度和断裂时延伸率的测定 |
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break |
| ISO 17993-2002 |
水质.液体萃取后通过用荧光检测的高效液体光谱分析法(HPLC)测定15种多环芳香碳氢化合物(PAK)(F18) |
Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction |
| ISO 17994-2004 |
水质.微生物方法之间的等效性建立规则 |
|
| ISO 17997-1-2004 |
牛奶.酪蛋白-氮含量的测定.第1部分:间接法(参照法) |
|
| ISO 17997-2-2004 |
牛奶.酪蛋白-氮含量的测定.第2部分:直接法 |
|
| ISO 18-1981 |
文献工作.期刊目次表 |
Documentation; Contents list of periodicals |
| ISO 180-2000 |
塑料.伊兆特(Izod)冲击强度的测定 |
Plastics - Determination of Izod impact strength |
| ISO 1802-1992 |
天然橡胶胶乳浓缩物.硼酸含量的测定 |
Natural rubber latex concentrate; determination of boric acid content |
| ISO 1803-1997 |
建筑结构.公差.尺寸精度的表示法.原则和术语 |
Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology |
| ISO 1804-1972 |
门.术语 |
Doors; Terminology |
| ISO 1805-1973 |
网渔具.网衣线断裂负荷和打结断裂负荷的测定 |
Fishing nets; Determination of breaking load and knot breaking load of netting yarns |
| ISO 18054-2004 |
鸢尾根茎油.铁含量的测定.毛细管柱气体色谱法 |
|
| ISO 18055-1-2004 |
摄影和成像.喷墨介质:分类、命名和尺寸.第1部分:摄影级介质(相纸和胶片) |
|
| ISO 1806-2002 |
渔网.网眼断裂力的测定 |
Fishing nets - Determination of mesh breaking force of netting |
| ISO 18064-2003 |
热塑弹性体.命名和缩略语 |
(Thermoplastic elastomers - Nomenclature and abbreviated terms) |
| ISO 18064-2003 |
热塑弹性体.命名和缩略语 |
|
| ISO 18064-2003 |
热塑弹性体.命名和缩略语 |
|
| ISO 18064-2003 |
热塑弹性体.命名和缩略语 |
|
| ISO 1807-1975 |
松散物料的连续机械装卸设备.有摇动式或往复式送料机的矩形或梯形槽的振动式输送机 |
Continuous mechanical handling equipment for loose bulk materials; Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal trough |
| ISO 18073-2004 |
水质.三氯至八氯二氧杂环乙烯和呋喃的测定.同位素稀释HRGC/HRMS法 |
|
| ISO 1809-1977 |
纺织机械和附件.纱筒管的模型的型式.名称.三种语言版 |
Textile machinery and accessories; Types of formers for yarn packages; Nomenclature Trilingual edition |
| ISO 181-1981 |
塑料.与炽热棒相接触的呈小试样状硬质塑料易燃特性的测定 |
Plastics; Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod |
| ISO 1810-1976 |
铜合金.镍含量(低含量)的测定.丁二酮肟分光光度法 |
Copper alloys; Determination of nickel (low contents); Dimethylglyoxime spectrophotometric method |
| ISO 18104-2003 |
医疗信息.护理用参考术语模式的综合 |
|
| ISO 1811-1-1988 |
铜和铜合金.化学分析试样的选择和制备.第1部分:铸造产品的取样 |
Copper and copper alloys; selection and preparation of samples for chemical analysis; part 1: sampling of cast unwrought products |
| ISO 1811-2-1988 |
铜和铜合金.化学分析试样的选择和制备.第2部分:锻造及铸造产品的取样 |
Copper and copper alloys; selection and preparation of samples for chemical analysis; part 2: sampling of wrought products and castings |
| ISO 18114-2003 |
表面化学分析.次级离子质谱法.测定离子注入标样中的相对灵敏度系数 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials) |
| ISO 18114-2003 |
表面化学分析.次级离子质谱法.测定离子注入标样中的相对灵敏度系数 |
|
| ISO 18115-2001 |
表面化学分析.词汇 |
Surface chemical analysis - Vocabulary |
| ISO 18118-2004 |
表面化学分析.俄歇电子光谱法和X射线光电子光谱法.同质材料定量分析用实验室测定相对敏感性因子的使用指南 |
|
| ISO 1812-1976 |
铜合金.铁含量的测定.1,10-菲罗啉分光光度法 |
Copper alloys; Determination of iron content; 1,10- Phenanthroline spectrophotometric method |
| ISO 1813-1998 |
皮带驱动.加肋V带、有接头V带和包括宽截面皮带及六角皮带在内的V带.抗静电皮带的导电率.特性和试验方法 |
Belt drives - V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts - Electrical conductivity of antistatic belts: Characteristics and methods of test |
| ISO 18144-2003 |
环境中的烟草烟雾.可吸入的悬浮粒子的估算.基于茄呢醇的方法 |
(Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol) |
| ISO 18144-2003 |
环境中的烟草烟雾.可吸入的悬浮粒子的估算.基于茄呢醇的方法 |
|
| ISO 18145-2003 |
环境中的烟草烟雾.空气中蒸气态烟碱和3-乙烯基吡啶的测定.气相色谱法 |
(Environmental tobacco smoke - Determination of vapour phase nicotine and 3-ethenylpyridine in air - Gas chromatographic method) |
| ISO 18145-2003 |
环境中的烟草烟雾.空气中蒸气态烟碱和3-乙烯基吡啶的测定.气相色谱法 |
|
| ISO 1815-1975 |
松散物料的连续机械装卸设备.管型槽的振动式送料机和输送机 |
Continuous mechanical handling equipment for loose bulk materials; Vibrating feeders and conveyors with tubular trough |
| ISO 18153-2003 |
体外诊断医疗装置.生物样品的定量测量.校准仪和控制材料所赋酶的催化浓度值的计量溯源性 |
(In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials ) |
| ISO 18153-2003 |
体外诊断医疗装置.生物样品的定量测量.校准仪和控制材料所赋酶的催化浓度值的计量溯源性 |
|
| ISO 1816-1975 |
松散物料和整装装载的连续机械装卸设备.皮带输送机.机动传动皮带轮的基本特性 |
Continuous mechanical handling equipment for loose bulk materials and unit loads; Belt conveyors; Basic characteristics of motorized driving pulleys |
| ISO 18165-2001 |
石油和天然气工业.水泥漂浮设备的性能试验 |
Petroleum and natural gas industries - Performance testing of cementing float equipment |
| ISO 1817-1999 |
硫化橡胶.对液体影响的测定 |
Rubber, vulcanized - Determination of the effect of liquids |
| ISO 18175-2004 |
无损检验.不使用电子测量仪器评价超声脉冲回波检验系统的性能特征 |
|
| ISO 1819-1977 |
连续机械装卸设备.安全规范.一般规则 |
Continuous mechanical handling equipment; Safety code; General rules |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com