标准号 |
中文名称 |
英文名称 |
| DIN ISO 5780-1991 |
造船.侧舷窗.窗位确定位置 |
(Shipbuilding; side scuttles; positioning; identical with ISO 5780:1987) |
| DIN ISO 5800-1998 |
摄影技术.静物照相用彩色负片.ISO感光度的测定 |
(Photography - Colour negative films for still photography - Determination of ISO speed (ISO 5800:1987)) |
| DIN ISO 5809-1986 |
淀粉及其制品.硫酸化灰分的测定 |
(Starches and derived products; determination of sulphated ash; identical with ISO 5809, edition 1982) |
| DIN ISO 5810-1986 |
淀粉及其制品.氯化物含量的测定.电位滴定法 |
(Starches and derived products; determination of chloride content; potentiometric method; identical with ISO 5810, edition 1982) |
| DIN ISO 5816-1997 |
电子设备用的白云母件.规范 |
(Muscovite mica components for electronic equipment - Specifications (ISO 5816:1979)) |
| DIN ISO 5821-1984 |
电阻点焊电极帽接头 |
(Resistance spot welding electrode caps) |
| DIN ISO 5826-2000 |
阻焊设备.变压器.适用于所有变压器的一般规范 |
(Resistance welding equipment - Tranformers - General specifications applicable to all transformers (ISO 5826:1999)) |
| DIN ISO 5827-1989 |
点焊.电极挡块和夹紧装置 |
(Spot welding; electrode back-up and clamps; identical with ISO 5827 1983 (status as of 1985)) |
| DIN ISO 5832-1-2000 |
外科植入物.金属材料.第1部分:锻制不锈钢 |
(Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997)) |
| DIN ISO 5832-11-2001 |
外科植入物.金属材料.第11部分:锻造6钛/7铝/铌合金 |
(Implants for surgery - Metallic materials - Part 11: Wrought titanium-6-aluminium 7-niobium alloy (ISO 5832-11:1994)) |
| DIN ISO 5832-12-2000 |
外科植入物.金属材料.第12部分:锻制钴铬钼合金 |
(Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy (ISO 5832-12:1996)) |
| DIN ISO 5832-2-2000 |
外科植入物.金属材料.第2部分:非合金钛 |
(Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999)) |
| DIN ISO 5832-3-2000 |
外科植入物.金属材料.第3部分:钛6-铝4-钒锻造合金 |
(Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996)) |
| DIN ISO 5832-4-2000 |
外科植入物.金属材料.第4部分:钴铬钼铸造合金 |
(Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy (ISO 5832-4:1996)) |
| DIN ISO 5832-5-2001 |
外科植入物.金属材料.第5部分:锻造钴/铬/钨/镍合金 |
(Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:1993)) |
| DIN ISO 5832-6-2001 |
外科植入物.金属材料.第6部分:煅制的钴镍铬钼合金 |
(Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:1997)) |
| DIN ISO 5832-7-2001 |
外科植入物.金属材料.第7部分:可锻的和冷加工的钴铬镍钼铁合金 |
(Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy (ISO 5832-7:1994)) |
| DIN ISO 5832-8-2000 |
外科植入物.金属材料.第8部分:锻制钴镍铬钼钨铁合金 |
(Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy (ISO 5832-8:1997)) |
| DIN ISO 5832-9-2000 |
外科植入物.金属材料.第9部分:锻制高氮不锈钢 |
(Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992)) |
| DIN ISO 5834-1-2000 |
外科植入物.超高分子量聚乙烯.第1部分:粉剂型 |
(Implants for surgery - Ultra-high molecular weight polyethylene - Part 1: Powder form (ISO 5834-1:1998)) |
| DIN ISO 5834-2 Berichtigung 1-2004 |
DINISO5834-2-2000的技术勘误 |
(Corrigenda to DIN ISO 5834-2:2000-08) |
| DIN ISO 5834-2 Berichtigung 1-2004 |
DIN ISO 5834-2-2000的技术勘误 |
|
| DIN ISO 5834-2-2000 |
外科植入物.超高分子量聚乙烯.第2部分:模塑型 |
(Implants for surgery - Ultra-high molecular weight polyethylene - Part 2: Moulded forms (ISO 5834-2:1998)) |
| DIN ISO 5845-1-1997 |
技术制图.组装用紧固件的简单表示法.第1部分:一般原理 |
(Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995)) |
| DIN ISO 5845-2-1997 |
技术制图.组装用紧固件的简单表示法.第2部分:航空和航天设备用铆钉 |
(Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment (ISO 5845-2:1995)) |
| DIN ISO 5855-1-1989 |
航空和航天..MJ螺纹.第1部分:一般要求 |
(Aerospace; MJ-threads; general requirements; identical with ISO 5855-1:1988) |
| DIN ISO 5855-2-1989 |
航空和航天..MJ螺纹.第2部分:螺栓和螺母的极限尺寸 |
(Aerospace; MJ threads; limit dimensions for bolts and nuts; identical with ISO 5855-2:1988) |
| DIN ISO 5855-3-1996 |
航空航天.MJ螺纹.第3部分:流体系统螺纹连接件的极限尺寸 |
(Aerospace - MJ threads - Part 3: Limit dimensions for fitting for fluid systems (ISO 5855-3:1988)) |
| DIN ISO 5884-1989 |
航空和航天.液压系统和组件.液压流体固体微粒污染的系统取样和测量方法 |
(Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987) |
| DIN ISO 5902-1981 |
高山雪撬.弹性性能的测定 |
(Alpine skis; determination of the elastic properties) |
| DIN ISO 5912-1999 |
野营帐篷 |
(Camping tents (ISO 5912:1993 + Amendment 1:1998)) |
| DIN ISO 5912-2004 |
野营帐篷 |
|
| DIN ISO 5956-1986 |
铜和铜合金.锑含量的测定.若丹明B(RhodamineB)光谱测定法 |
(Copper and copper alloys; determination of antimony content; Rhodamine B spectrophotometric method; identical with ISO 5956, edition 1984) |
| DIN ISO 5972-1997 |
云母块,薄片,薄膜和劈裂叠层.厚度的测定 |
(Mica blocks, thins, films and splittings - Measurement of thickness (ISO 5972:1978)) |
| DIN ISO 5989-1998 |
摄影学.摄影银卤化材料加工用预分装的化合物.词汇 |
(Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary (ISO 5989:1995)) |
| DIN ISO 6-1996 |
摄影技术.黑白照相机负片/冲洗系统.ISO感光速度测定 |
(Photography - Black-and-white pictorial still camera negative film/process systems - Determination of ISO speed (ISO 6:1993)) |
| DIN ISO 6003-1985 |
高山雪撬.雪撬质量和惯性极力矩的测定.实验室测量法 |
(Alpine skis; determination of mass and polar moment of inertia; laboratory measurement method) |
| DIN ISO 6004-1995 |
高山雪撬.雪撬紧固螺钉.要求 |
(Alpine skis - Ski bindings screws - Requirements; identical with ISO 6004:1991) |
| DIN ISO 6005-1995 |
高山雪撬.雪撬紧固螺钉.检验方法 |
(Alpine skis - Ski bindings screws - Test methods; identical with ISO 6005:1991) |
| DIN ISO 6020-1-2001 |
液力传动.16MPa(160bar)系列单杆液压缸装配尺寸.第1部分:中型系列 |
(Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPA (160 bar) series - Part 1: Medium series (ISO 6020-1:1998)) |
| DIN ISO 6025-2003 |
电影技术.35mm和16mm模拟摄影声音试验胶片.规范 |
(Cinematography - Analogue photographic sound test films, 35 mm and 16 mm - Specifications (ISO 6025:2000)) |
| DIN ISO 603-1-2000 |
粘合磨料产品.尺寸.第1部分:中心之间外圆柱形磨床用砂轮 |
(Bonded abrasives products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres (ISO 603-1:1999)) |
| DIN ISO 603-10-2000 |
粘合磨料产品.尺寸.第10部分:搪磨和超级研磨用磨石 |
(Bonded abrasives products - Dimensions - Part 10: Stones for honing and superfinishings (ISO 603-10:1999)) |
| DIN ISO 603-11-2000 |
粘合磨料产品.尺寸.第11部分:手工精整油石 |
(Bonded abrasives products - Dimensions - Part 11: Hand finishing sticks (ISO 603-11:1999)) |
| DIN ISO 603-12-2000 |
粘合磨料产品.尺寸.第12部分:在直磨床上清除毛刺和修整用砂轮 |
(Bonded abrasives products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder (ISO 603-12:1999)) |
| DIN ISO 603-13-2000 |
粘合磨料产品.尺寸.第12部分:在立式磨床上清除毛刺和修整用砂轮 |
(Bonded abrasives products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder (ISO 603-13:1999)) |
| DIN ISO 603-14-2000 |
粘合磨料产品.尺寸.第12部分:在有角度磨床上清除毛刺和修整用砂轮 |
(Bonded abrasives products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder (ISO 603-14:1999)) |
| DIN ISO 603-15-2000 |
粘合磨料产品.尺寸.第15部分:固定或移动切断机上切割用砂轮 |
(Bonded abrasives products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines (ISO 603-15:1999)) |
| DIN ISO 603-16-2000 |
粘合磨料产品.尺寸.第16部分:手持动力工具上切割用砂轮 |
(Bonded abrasives products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools (ISO 603-16:1999)) |
| DIN ISO 603-2-2000 |
粘合磨料产品.尺寸.第2部分:非中心外圆磨床用砂轮 |
(Bonded abrasives products - Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding (ISO 603-2:1999)) |
| DIN ISO 603-3-2000 |
粘合磨料产品.尺寸.第3部分:内圆磨床用砂轮 |
(Bonded abrasives products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding (ISO 603-3:1999)) |
| DIN ISO 603-4-2000 |
粘合磨料产品.尺寸.第4部分:表面磨削/圆周磨削用砂轮 |
(Bonded abrasives products - Dimensions - Part 4: Grinding wheels for surface grinding/peripheral grinding (ISO 603-4:1999)) |
| DIN ISO 603-5-2000 |
粘合磨料产品.尺寸.第5部分:表面磨削/平面磨削用砂轮 |
(Bonded abrasives products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding (ISO 603-5:1999)) |
| DIN ISO 603-6-2000 |
粘合磨料产品.尺寸.第6部分:工具和工具室磨削用砂轮 |
(Bonded abrasives products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding (ISO 603-6:1999)) |
| DIN ISO 603-7-2000 |
粘合磨料产品.尺寸.第7部分:手工磨削用砂轮 |
(Bonded abrasives products - Dimensions - Part 7: Grinding wheels for manually guided grinding (ISO 603-7:1999)) |
| DIN ISO 603-8-2000 |
粘合磨料产品.尺寸.第8部分:清除毛刺和修整/打磨用砂轮 |
(Bonded abrasives products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging (ISO 603-8:1999)) |
| DIN ISO 603-9-2000 |
粘合磨料产品.尺寸.第9部分:高压磨削用砂轮 |
(Bonded abrasives products - Dimensions - Part 9: Grinding wheels for high-pressure grinding (ISO 603-9:1999)) |
| DIN ISO 6043-1986 |
造船.受拉伸载荷的叉和眼结构总成.主要尺寸 |
(Shipbuilding; eye and fork assemblies under tension load; main dimensions; identical with ISO 6043, edition 1985) |
| DIN ISO 6044-1986 |
造船.悬臂起重机吊杆底脚装置.主要尺寸 |
(Shipbuilding; fork-type heel fittings for ships` derrick booms; main dimensions; identical with ISO 6044, edition 1985) |
| DIN ISO 6045-1988 |
造船.悬臂起重机鹅颈件轴承.总成和件 |
(Shipbuilding and marine structures; bearings for derrick goosenecks; assemblies and components; identical with ISO 6045, edition 1987) |
| DIN ISO 6051-1996 |
摄影技术.已冲洗的照片.贮存条件 |
(Photography - Processed photographic paper prints - Storage practices (ISO 6051:1992)) |
| DIN ISO 607-1985 |
表面活性剂和洗涤剂.样品分割法 |
(Surface active agents and detergents; methods of sample division; identical with ISO 607, edition 1980) |
| DIN ISO 6104-2005 |
超磨料制品.带金刚石或立方氮化硼的旋转磨削工具.一般评述、名称与符号和多种语言术语 |
|
| DIN ISO 6105-1-2005 |
超级研磨切割砂轮用坯件.第1部分:建筑物和土木工程用人工切割 |
|
| DIN ISO 6105-2-2005 |
超级研磨切割砂轮用坯件.第2部分:建筑物和土木工程用手持式切割 |
|
| DIN ISO 611-1997 |
道路车辆.机动车及其挂车的制动.词汇 |
(Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary (ISO 611:1994)) |
| DIN ISO 6115-1989 |
造船.拖网绞车 |
(Shipbuilding; trawl winches; identical with ISO 6115:1988) |
| DIN ISO 6121-1981 |
表面活性剂.工业用烷基磺酸盐.烷基单磺酸盐含量的测定(两相直接滴定法) |
(Surface active agents, technical alkyl-sulphonates, determination of alkyl-monosulphonates content (direct twophase titration method)) |
| DIN ISO 6122-1982 |
表面活性剂.工业用链烷磺酸盐.链烷磺酸盐总含量的测定 |
(Surface active agents; technical alkane sulfonates; determination of total alkane sulfonates content) |
| DIN ISO 6133-2004 |
橡胶和塑料.测定撕裂强度和粘合强度所获得的多峰图形的分析 |
|
| DIN ISO 6141-2004 |
气体分析.标定气体和混合气体的合格证书要求 |
|
| DIN ISO 6142-1985 |
气体分析.校正用混合气体的制备.称重法 |
(Gas analysis - Preparation of calibration gas mixtures - Weighing methods) |
| DIN ISO 6143-1985 |
气体分析.标定用混合气体成分的测定.比较方法 |
(Gas analysis; determination of composition of calibration gas mixtures; comparison methods) |
| DIN ISO 6143-2004 |
气体分析.测定并检查标定用混合气体成分的比较方法 |
|
| DIN ISO 6144-1985 |
气体分析.标定用混合气体的制备.静态容量法 |
(Gas analysis; preparation of calibration gas mixtures; static volumetric methods) |
| DIN ISO 6146-1983 |
气体分析.标定用混合气体的制备.测压法 |
(Gas analysis; preparation of calibration gas mixtures; manometric method) |
| DIN ISO 6149-1-1996 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内具有O形环的油口 |
(Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing (ISO 6149-1:1993)) |
| DIN ISO 6149-2-1996 |
油口和具有ISO261螺纹和O型环密封的螺柱端头.第2部分:重载(S系列)螺柱端头.尺寸、设计、试验方法和要求 |
(Ports and stud ends with ISO 261 threads and O-ring sealing - Part 2: Heavy duty (S series) stud ends - Dimensions, design, test methods and requirements (ISO 6149-2:1993)) |
| DIN ISO 6149-3-1996 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸 |
(Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993)) |
| DIN ISO 6169-1985 |
纺织机械和辅助装置.并纱和捻纱的凸缘筒子 |
(Textile machinery and accessories; flanged bobbins for doubling and twisting; identical with ISO 6169, edition 1982) |
| DIN ISO 6170-2001 |
纺纱机.粗梳机用搓条橡胶 |
(Spinning machinery - Condenser rubbers for cards (ISO 6170:1999)) |
| DIN ISO 6171-1985 |
纺织机械和辅助装置.梳理机的珠形金属丝和相应的槽.主要型式和尺寸 |
(Textile machinery and accessories; bead wires and corresponding grooves for cards; main types and dimensions; identical with ISO 617, edition 1982) |
| DIN ISO 6173-1983 |
纺织机械和辅助装置.自由端纺纱机.术语 |
(Open-end spinning machines; vocabulary) |
| DIN ISO 6176-1996 |
纺织机械.经纱上浆机.最大有效宽度 |
(Textile machinery - Warp sizing machines - Maximum usable width (ISO 6176:1994)) |
| DIN ISO 6177-1988 |
纺织机械.卷布辊.术语和主要尺寸 |
(Textile machinery; cloth rollers; terminology and main dimensions; identical with ISO 6177, edition 1986) |
| DIN ISO 6195-1989 |
液压系统和组件.液压缸.往复作用的刮垢环罩.尺寸和公差 |
(Fluid power systems and components; cylinders; housings for rod wiper rings in reciprocating applications; dimensions and tolerances; identical with ISO 6195:1986) |
| DIN ISO 6199-1995 |
缩微摄影技术.在16mm和35mm银胶凝型缩微胶卷上的文件缩微摄影.操作规程 |
(Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures; identical with ISO 6199:1991) |
| DIN ISO 6218-1982 |
造船.内河航行.推进式驳船的连接用绞车.主要尺寸 |
(Shipbuilding; inland navigation; coupling winches for push tows, main dimensions) |
| DIN ISO 6234-1982 |
银行业务.认可印鉴册及其缩微胶片的显示 |
(Bank operations; authorized signature lists and their representation on microfiche) |
| DIN ISO 6265-1995 |
高山雪撬.变形载荷和断裂载荷的测定 |
(Alpine skis - Determination of deformation load and breaking load; identical with ISO 6265:1992) |
| DIN ISO 6266-1981 |
高山雪撬.疲劳指数的测定.周期性载荷试验 |
(Alpine skis; determination of fatigue indexes; cyclic loading test) |
| DIN ISO 6267-1980 |
高山雪撬.弯曲振动的测量 |
(Alpine skis; measurement of bending vibrations) |
| DIN ISO 6271-1999 |
透明液体.用铂钴标度评定颜色等级 |
(Clear liquids - Estimation of colour by the platinum-cobalt scale (ISO 6271:1997)) |
| DIN ISO 6279-1979 |
滑动轴承.整体轴承用铝合金 |
(Plain Bearings; Aluminium Alloy for Solid Bearings) |
| DIN ISO 6280-1982 |
滑动轴承.薄壁多层轴承轴瓦的要求 |
(Plain bearings; requirements on backings for thick-walled multilayer plain bearings) |
| DIN ISO 6282-1985 |
滑动轴承.金属薄壁轴瓦.δ0.01极限值的测定 |
(Plain bearings; metallic thin-walled half bearings; determination of the -limit; identical with ISO 6282, edition 1983) |
| DIN ISO 6284-1997 |
技术图纸.建筑用图纸.极限尺寸标注 |
(Construction drawings - Indication of limit deviations (ISO 6284:1996)) |
| DIN ISO 6289-2004 |
滑雪板.词汇 |
(Skis - Vocabulary (ISO 6289:2003)) |
| DIN ISO 6289-2004 |
滑雪板.词汇 |
|
| DIN ISO 6313-1981 |
道路车辆.制动闸衬.圆形制动垫片尺寸和形状的热效应.试验程序 |
(Road vehicles; brake linings; effects of heat on dimensions and form of disc brake pads; test procedure) |
| DIN ISO 6315-1981 |
道路车辆.闸衬.腐蚀对衬片与铁质结合面的胶接.试验程序 |
(Road vehicles; brake linings; seizure to ferrous mating surface due to corrosion; test procedure) |
| DIN ISO 6318-1987 |
圆度测量.圆度的术语.定义和参数 |
(Measurement of roundness; terms, definitions and parameters of roundness; identical with ISO 6318, edition 1985) |
| DIN ISO 6344-1-2000 |
涂层磨料.粒度分析.第1部分:粒度分布试验 |
(Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)) |
| DIN ISO 6344-2-2000 |
涂层磨料.粒度分析.第2部分:肉眼可见磨料为P12至P220的粒度分布测定 |
(Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998)) |
| DIN ISO 6344-3-2000 |
涂层磨料.粒度分析.第3部分:微粒磨料为P240至P2500的粒度分布测定 |
(Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998)) |
| DIN ISO 6345-1994 |
造船和船舶结构.窗和侧舷窗.词汇 |
(Shipbuilding and marine structures; windows and side scuttles; vocabulary; identical with ISO 6345:1990) |
| DIN ISO 6370-1-1995 |
釉瓷和搪瓷.耐磨性测定.第1部分:耐磨试验器械 |
(Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus; identical with ISO 6370-1:1991) |
| DIN ISO 6370-2-1995 |
釉瓷和搪瓷.耐磨性测定.第2部分:表层耐磨后质量的损失 |
(Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion; identical with ISO 6370-2:1991) |
| DIN ISO 6386-1997 |
白云母的劈裂片.定级和目视分类 |
(Muscovite mica splittings - Grading and visual classification (ISO 6386:1981)) |
| DIN ISO 6388-1989 |
表面活性剂.使用旋转粘度计测定流动特性 |
(Surface active agents - Determination of flow properties using a rotational viscosimeter; Identical with ISO 6388:1983) |
| DIN ISO 6393-1989 |
声学.土方机械发出的气载噪声测量.符合室外噪声限制的测定方法.静态试验条件 |
(Measurement of airborne noise emitted by machines; enveloping surface method; earth-moving machinery (stationary test condition); identical with ISO 6393:1985) |
| DIN ISO 6394-1989 |
声学.土方机械发出的气载的噪声测量.操作者位置.静态试验条件 |
(Measurement of airborne noise emitted by machines; measurement at the operator`s position; earth-moving machinery (stationary test condition); identical with ISO 6394:1985) |
| DIN ISO 6410-1-1993 |
技术制图.螺纹和螺纹部件.通则 |
(Technical drawings; screw threads and threaded parts; general conventions; identical with ISO 6410-1:1993) |
| DIN ISO 6410-2-1993 |
技术制图.螺纹和螺纹部件.螺纹镶嵌件 |
(Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993) |
| DIN ISO 6410-3-1993 |
技术制图.螺纹和螺纹部件.简化表示 |
(Technical drawings; screw threads and threaded parts; simplified representation; identical with ISO 6410-3:1993) |
| DIN ISO 6411-1997 |
技术制图.中心孔的简化画法 |
(Technical drawings - Simplified representation of centre holes (ISO 6411:1982)) |
| DIN ISO 6412-1-1991 |
技术制图.管道的简化表示法.第1部分:通则和正交表示法 |
Technical drawings; simplified representation of pipelines; general rules and orthogonal representation; identical with ISO 6412-1:1989 |
| DIN ISO 6412-2-1991 |
技术制图.管道的简化表示法.第2部分:等角投影 |
Technical drawings; simplified representation of pipelines; isometric projection; identical with ISO 6412-2:1989 |
| DIN ISO 6412-3-1994 |
技术制图.管道的简化表示法.第3部分:通风和排放系统终端部件 |
Technical drawings - Simplified representation of pipelines - Terminal features of ventilation and drainage systems; identical with ISO 6412-3:1993 |
| DIN ISO 6413-1990 |
技术制图.花键和锯齿形花键的表示方法 |
Technical drawings; representation of splines and serrations; identical with ISO 6413:1988 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com