标准号 |
中文名称 |
英文名称 |
BS EN ISO 8740-1998 |
带槽销.有倒角的全长直槽型销 |
(Grooved pins - Full-length parallel grooved, with chamfer) |
BS EN ISO 8741-1998 |
带槽销.半长倒锥槽型销 |
(Grooved pins - Half-length reverse-taper grooved) |
BS EN ISO 8742-1998 |
带槽销.中部三分之一长槽型销 |
(Grooved pins - One-third-length centre grooved) |
BS EN ISO 8743-1998 |
带槽销.中部半长槽型销 |
(Grooved pins - Half-length centre grooved) |
BS EN ISO 8744-1998 |
带槽销.全长锥槽型销 |
(Grooved pins - Full-length taper grooved) |
BS EN ISO 8745-1998 |
带槽销.半长锥槽型销 |
(Grooved pins - Half-length taper grooved) |
BS EN ISO 8746-1998 |
圆头带槽销 |
Grooved pins with round head |
BS EN ISO 8747-1998 |
沉头带槽销 |
Grooved pins with countersunk head |
BS EN ISO 8748-1998 |
弹簧型开口直销.重载盘绕式 |
Spring-type straight pins - Coiled, heavy duty |
BS EN ISO 8750-1998 |
弹簧型开口直销.标准负荷盘绕式 |
Spring-type straight pins - Coiled, standard duty |
BS EN ISO 8751-1998 |
弹簧型开口直销.轻负荷盘绕式 |
(Spring-type straight pins - Coiled, light duty) |
BS EN ISO 8752-1998 |
弹簧型开口直销.重负荷槽头式 |
Spring-type straight pins - Slotted, heavy duty |
BS EN ISO 8754-1995 |
石油及其产品的试验方法.石油产品.硫含量的测定.能量分散的X射线荧光法 |
Methods of test for petroleum and its products - Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence method |
BS EN ISO 8754-2003 |
石油产品.硫含量的测定.能量分散X射线荧光光谱测定法 |
(Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry) |
BS EN ISO 8765-2001 |
带米制细牙螺纹的六角头螺栓.产品等级A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B |
BS EN ISO 877-1996 |
塑料.暴露到直接风化、玻璃纤维对光的风化及使用屈折反光镜对日光增强风化的方法 |
(Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors.) |
BS EN ISO 8780-1-1991 |
颜料和稀释剂.色散特性评定用色散方法.第1部分:前言 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Introduction |
BS EN ISO 8780-2-1991 |
颜料和稀释剂.色散特性评定用色散方法.第2部分:色散用振荡摇动机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using an oscillatory shaking machine |
BS EN ISO 8780-3-1991 |
颜料和稀释剂.色散特性评定用色散方法.第3部分:色散用高速叶轮机 |
(Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a high speed impeller mill) |
BS EN ISO 8780-4-1991 |
颜料和稀释剂.色散特性评定用色散方法.第4部分:色散用研磨机 |
(Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a bead mill) |
BS EN ISO 8780-5-1991 |
颜料和稀释剂.色散特性评定用色散方法.第5部分:色散用自动研磨机 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using an automatic muller |
BS EN ISO 8780-6-1991 |
颜料和稀释剂.色散特性评定用色散方法.第6部分:色散用三组镇压机 |
(Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a triple-roll mill) |
BS EN ISO 8781-1-1991 |
颜料和稀释剂.色散特性评定方法.第1部分:有色颜料着色度变化的评定 |
(Pigments and extenders - Methods of assessment of dispersion characteristics - Assessment from the charge in tinting strength of coloured pigments) |
BS EN ISO 8781-2-1991 |
颜料和稀释剂.色散特性评定方法.第2部分:磨碎细度变化的评定 |
(Pigments and extenders - Methods of assessment of dispersion characteristics - Assessment from the change in fineness of grind) |
BS EN ISO 8781-3-1991 |
颜料和稀释剂.色散特性评定方法.第3部分:光泽变化评定 |
(Pigments and extenders - Methods of assessment of dispersion characteristics - Assessment from the change in gloss) |
BS EN ISO 8785-1999 |
几何产品规范(GPS).表面缺陷.术语、定义和参数 |
(Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters) |
BS EN ISO 8795-2002 |
饮用水供给用塑料输水管道系统.析出物迁移量评定.测定塑料管道、管件和连接件的析出物迁移量 |
(Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints) |
BS EN ISO 8799-1996 |
表面活性剂.硫酸乙氧乙醇和硫酸乙氧烷基苯酚.非硫化物含量的测量 |
(Analysis of surface active agents (raw materials) - Ethoxylated alcohol and alkylphenol sulfates - Method for determination of unsulfated matter content) |
BS EN ISO 8819-1995 |
石油及其产品的试验方法.液化石油气.硫化氢的测定.醋酸盐导入法 |
(Methods of test for petroleum and its products - Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method) |
BS EN ISO 8826-1-1995 |
技术制图.滚柱轴承.通用简化画法 |
(Technical drawings - Roller bearings - General simplified representation) |
BS EN ISO 8826-2-1997 |
技术制图.滚动轴承.简化画法概括 |
(Technical drawings - Roller bearings - Detailed simplified representation) |
BS EN ISO 8835-4-2005 |
吸入式麻醉剂系统.麻醉剂蒸气输送设备 |
|
BS EN ISO 8835-5-2004 |
吸入式麻醉剂系统.麻醉剂通风设备 |
|
BS EN ISO 8847-2004 |
小艇.操舵装置.缆索和滑轮系统 |
|
BS EN ISO 8849-2003 |
小艇.电动直流舱底泵 |
(Small craft - Electrically operated direct-current bilge-pumps) |
BS EN ISO 8861-1998 |
造船.柴油机船的发动机室的通风.设计要求和计算依据 |
(Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations) |
BS EN ISO 887-2000 |
通用米制螺栓、螺钉和螺母用平垫圈.一般示意图 |
(Plain washers for metric bolts, screws and nuts for general purposes - General plan) |
BS EN ISO 8871-1-2004 |
非肠道及制药设备用弹性件.水蒸压器中的萃取物 |
|
BS EN ISO 8871-1-2004 |
非肠道及制药设备用弹性件.水蒸压器中的萃取物 |
|
BS EN ISO 8871-1997 |
含水非肠道药配制剂用弹性件 |
(Elastomeric parts for aqueous parenteral preparations) |
BS EN ISO 8871-2-2004 |
非肠道及制药设备用弹性件.识别和特性 |
|
BS EN ISO 8871-2-2004 |
非肠道及制药设备用弹性件.识别和特性 |
|
BS EN ISO 8871-3-2004 |
非肠道及制药设备用弹性件.释放粒子计数的测定 |
|
BS EN ISO 8871-3-2004 |
非肠道及制药设备用弹性件.释放粒子计数的测定 |
|
BS EN ISO 8872-2003 |
输血、输液及注射瓶的铝盖.一般要求和试验方法 |
(Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods) |
BS EN ISO 8891-2000 |
贵金属含量至少为25%但低于75%的牙科用铸造合金 |
(Dental casting alloys with noble metal content of at least 25% but less than 75%) |
BS EN ISO 8892-1995 |
油料种子残渣.己烷总残留量的测定 |
(Oilseed residues - Determination of total residual hexane) |
BS EN ISO 8968-1-2002 |
牛奶.氮含量的测定.Kjeldahl法 |
(Milk - Determination of nitrogen content - Kjeldahl method) |
BS EN ISO 8968-2-2002 |
牛奶.氮含量的测定.分段浸解法(宏观法) |
(Milk - Determination of nitrogen content - Block-digestion method (Macro method)) |
BS EN ISO 8968-4-2002 |
牛奶.氮含量的测定.非蛋白质氮含量的测定 |
(Milk - Determination of nitrogen content - Determination of non-protein nitrogen content) |
BS EN ISO 8968-5-2002 |
牛奶.氮含量的测定.蛋白质氮含量的测定 |
(Milk - Determination of nitrogen content - Determination of protein-nitrogen content) |
BS EN ISO 8973-1999 |
液化石油气.密度和蒸气压力的计算方法 |
(Liquefied petroleum gases - Calculation method for density and vapour pressure) |
BS EN ISO 8974-2002 |
塑料.酚醛树脂.用气相色谱法测定残余酚含量 |
(Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography) |
BS EN ISO 8975-1995 |
塑料.酚醛树脂.pH值的测定 |
(Plastics - Phenolic resins - Determination of pH) |
BS EN ISO 898-1-1999 |
碳钢和合金钢制造的紧固件的机械特性.螺栓、螺钉和螺柱 |
(Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs) |
BS EN ISO 898-5-1999 |
碳钢及合金钢制紧固件的机械性能.无拉伸应力下的定位螺钉和类似的螺纹紧固件 |
(Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stresses) |
BS EN ISO 898-6-1996 |
紧固件的机械特性.螺母样品的检验荷载要求.精密螺距 |
(Mechanical properties of fasteners - Nuts with specified proof load values - Fine pitch thread) |
BS EN ISO 8980-1-1996 |
眼科光学.未打磨完成的眼镜片.单光多焦透镜片规范 |
(Ophthalmic optics - Uncut finished spectacle lenses - Specifications for single-vision and multifocal lenses) |
BS EN ISO 8980-1-2004 |
眼科光学.未切边成品眼镜片.单焦点和多焦点镜片规范 |
|
BS EN ISO 8980-2-1996 |
眼科光学.未打磨完成的眼镜片.渐变眼镜片规范 |
(Ophthalmic optics - Uncut finished spectacle lenses - Specifications for progressive power lenses) |
BS EN ISO 8980-2-2004 |
眼科光学.未切边成品眼镜片.渐变焦眼镜片规范 |
|
BS EN ISO 8980-3-1999 |
眼科光学.未打磨完成的眼镜片.透射率规范和试验方法 |
(Ophthalmic optics - Uncut finished spectacle lenses - Transmittance specifications and test methods) |
BS EN ISO 8980-3-2004 |
眼科光学.未切边成品眼镜片.透光性规范和试验方法 |
|
BS EN ISO 8980-4-2000 |
眼科光学.未打磨的成品眼镜镜片.防反射涂层的试验方法和规范 |
(Ophthalmic optics - Uncut finished spectacle lenses - Specifications and test methods for anti-reflective coatings) |
BS EN ISO 8985-1998 |
塑料.乙烯/乙烯基乙酸盐共聚物(ENAC)热塑性.乙烯基乙酸盐含量的测定 |
(Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content) |
BS EN ISO 8986-2-1996 |
塑料.聚丁烯模制品和挤塑材料.第2部分:试样制造和性能测定 |
(Plastics - Polybutene (PB) moulding and extrusion materials - Preparation of test specimens and determination of properties) |
BS EN ISO 8987-1998 |
塑料.酚醛树脂.在B转变试验板上的活化性能测定 |
(Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate) |
BS EN ISO 8988-1997 |
塑料.酚醛树脂.六亚甲基四胺含量的测定.基尔达斯法和过氯酸法 |
(Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method and perchloric acid method) |
BS EN ISO 8989-1998 |
塑料.液体酚醛树脂.水混溶性的测定 |
(Plastics - Liquid phenolic resins - Determination of water miscibility) |
BS EN ISO 899-1-2003 |
塑料.蠕变的测定.拉伸蠕变 |
(Plastics - Determination of creep behaviour - Tensile creep) |
BS EN ISO 899-2-2003 |
塑料.蠕变的测定.用三点加载法测定挠曲蠕变 |
(Plastics - Determination of creep behaviour - Flexural creep by three-point loading) |
BS EN ISO 8990-1996 |
热绝缘.稳定状态热传输特性的测定.校正及屏蔽的隔热箱 |
(Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box) |
BS EN ISO 8996-2005 |
热环境的人类工效学.代谢率的测定 |
|
BS EN ISO 90-1-1999 |
轻型金属容器.定义和尺寸、容量的测定.开顶式二重卷边罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Open-top cans |
BS EN ISO 90-2-1999 |
轻型金属容器.定义和尺寸、容量的测定.通用容器 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - General use containers |
BS EN ISO 90-3-2001 |
轻型金属容器.定义和尺寸、容量的测定.开顶式二重卷边罐 |
Light gauge metal containers - Definitions and determination of dimensions and capacities - Light gauge metal containers - Definitions and determination of dimensions and capacities - Aerosol cans |
BS EN ISO 9000-1-1994 |
质量管理和质量保证.选则和使用导则 |
(Quality management and quality assurance standards - Guidelines for selection and use) |
BS EN ISO 9000-2000 |
质量管理系统.原理和词汇 |
(Quality management systems - Fundamentals and vocabulary) |
BS EN ISO 9000-2005 |
质量管理体系.基础和词汇 |
|
BS EN ISO 9000-3-1998 |
质量管理和质量保证.ISO 9001-1994:计算机软件的开发,供给,安装和维护的使用导则 |
Quality management and quality assurance standards - Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software |
BS EN ISO 9001-2000 |
质量管理系统.要求 |
(Quality management systems - Requirements) |
BS EN ISO 9004-2000 |
质量管理系统.性能改进导则 |
Quality management systems - Guidelines for performance improvements |
BS EN ISO 9013-2002 |
热切割.热切割分类.产品几何量技术规范和质量公差 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances |
BS EN ISO 9020-1996 |
色漆和清漆用粘合剂.氨基树脂中自由甲醛含量的测定.亚硫酸钠滴定法 |
Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrimetric method |
BS EN ISO 9029-1997 |
石油和石油产品的试验方法.原油.水含量的测定.蒸馏法 |
Methods of test for petroleum and its products - Crude petroleum - Determination of water - Distillation method |
BS EN ISO 9046-2005 |
建筑施工.连接产品.恒温下密封剂的粘附/粘结性能的测定 |
|
BS EN ISO 9047-1995 |
建筑施工.密封.在可变温度下粘附/内聚特性的测定 |
Building construction - Sealants - Determination of adhesion/cohesion properties at variable temperatures |
BS EN ISO 9047-2003 |
房屋建筑.连接件.变温下密封胶粘合性能的测定 |
(Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures) |
BS EN ISO 9054-1999 |
硬质泡沫塑料.自结皮高密度材料的试验方法 |
Cellular plastics, rigid - Test methods for self-skinned high-density materials |
BS EN ISO 9073-10-2005 |
纺织品.无纺织物的试验方法.干燥状态下棉绒和其它粒子生成物 |
|
BS EN ISO 9073-10-2005 |
纺织品.无纺织物的试验方法.干燥状态下棉绒和其它粒子生成物 |
|
BS EN ISO 9073-2-1997 |
纺织品.非织造品的试验方法.厚度的测定 |
Textiles - Test methods for nonwovens - Determination of thickness |
BS EN ISO 9073-4-1997 |
纺织品.非织造品的检验方法.第4部分:抗撕裂的测定 |
Textiles - Test methods for nonwovens - Determination of tear resistance |
BS EN ISO 9073-7-1998 |
纺织品.非织造品的试验方法.弯曲长度的测定 |
Textiles - Test methods for nonwovens - Determination of bending length |
BS EN ISO 9073-8-1998 |
纺织品.非织造品的试验方法.液体渗透时间的测定(模拟尿) |
Textiles - Test methods for nonwovens - Determination of liquid strike-through time (simulated urine) |
BS EN ISO 9073-9-1998 |
纺织品.非织造品的试验方法.悬垂系数测定 |
Textiles - Test methods for nonwovens - Determination of drape coefficient |
BS EN ISO 9080-2003 |
塑料管道和导管系统.用外推法测定热塑性管道型材的长期静液压强度 |
(Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation) |
BS EN ISO 9093-1-1995 |
小船.金属海水阀和通体配件 |
(Small craft - Seacocks and through-hull fittings - Metallic) |
BS EN ISO 9093-2-2002 |
小艇.通海旋塞及贯穿艇体配件.非金属的 |
(Small craft - Seacocks and through-hull fittings - Non-metallic) |
BS EN ISO 9094-1-2003 |
小艇.防火.艇体长最高达15m的小艇 |
Small craft - Fire protection - Craft with a hull length of up to and including 15 m |
BS EN ISO 9094-2-2003 |
小艇.防火.艇体长超过15m的小艇 |
(Small craft - Fire protection - Craft with a hull length of over 15 m) |
BS EN ISO 9097-1995 |
小型船舶.电扇 |
(Small craft - Electric fans) |
BS EN ISO 9100-1-2005 |
玻璃容器.真空凸缘瓶口.总则 |
|
BS EN ISO 9100-10-2005 |
玻璃容器.真空凸缘瓶口.普通规格77 |
|
BS EN ISO 9100-11-2005 |
玻璃容器.真空凸缘瓶口.普通规格82 |
|
BS EN ISO 9100-12-2005 |
玻璃容器.真空凸缘瓶口.普通规格89 |
|
BS EN ISO 9100-5-2005 |
玻璃容器.真空凸缘瓶口.普通规格43和48 |
|
BS EN ISO 9100-6-2005 |
玻璃容器.真空凸缘瓶口.普通规格53和58 |
|
BS EN ISO 9100-7-2005 |
玻璃容器.真空凸缘瓶口.深度58 |
|
BS EN ISO 9100-8-2005 |
玻璃容器.真空凸缘瓶口.普通规格63、66和70 |
|
BS EN ISO 9100-8-2005 |
玻璃容器.真空凸缘瓶口.普通规格63、66和70 |
|
BS EN ISO 9100-9-2005 |
玻璃容器.真空凸缘瓶口.深度63、66和70 |
|
BS EN ISO 9142-2004 |
粘合剂.胶粘件试验用标准实验室老化条件的选择指南 |
|
BS EN ISO 9167-1-1993 |
油菜种子.葡萄糖甙含量测定.高性能液相色谱法 |
(Rapeseed - Determination of glucosinolates content - Method using high-performance liquid chromatography) |
BS EN ISO 9167-2-1995 |
油菜种子.葡萄糖甙含量测定.X射线荧光光谱法 |
(Rapeseed - Determination of glucosinolates content - Method using X-ray fluorescence spectrometry) |
BS EN ISO 9173-1-1992 |
拔牙钳.第1部分:螺钉和铰链接合型 |
(Dental extraction forceps - Screw and pin joint types) |
BS EN ISO 9187-1-1999 |
医用注射设备.注射物用安瓿瓶 |
Injection equipment for medical use - Ampoules for injectables |
BS EN ISO 9187-1-2003 |
医用注射器具.注射安瓿 |
(Injection equipment for medical use - Ampoules for injectables) |
BS EN ISO 9187-2-1999 |
医用注射设备.一点切针剂 |
(Injection equipment for medical use - One-point-cut (OPC) ampoules) |
BS EN ISO 9220-1989 |
金属镀层.镀层厚度的测量.扫描电子显微镜法 |
(Metallic coatings - Measurement of coating thickness - Scanning electron microscope method) |