标准号 |
中文名称 |
英文名称 |
| ISO 5291-1993 |
皮带传动.套接标准的三角皮带用的槽形皮带轮.槽形断面AJ,BJ,CJ和DJ(有效系列) |
Belt drives; grooved pulleys for joined classical V-belts; groove sections AJ, BJ, CJ and DJ (effective system) |
| ISO 5292-1995 |
皮带传动.三角皮带和三角肋条皮带.额定功率的计算 |
Belt drives - V-belts and V-ribbed belts - Calculation of power ratings |
| ISO 5293-1981 |
输送带.三个等长导辊的距离变换公式 |
Conveyor belts; Formula for transition distance on three equal length idler rolls |
| ISO 5293-2004 |
输送带.三个导辊的最小变换距离的测定 |
|
| ISO 5294-1989 |
同步皮带驱动.皮带轮 |
Synchronous belt drives; pulleys |
| ISO 5295-1987 |
同步三角皮带.额定功率和传动中心距的计算 |
Synchronous belts; Calculation of power rating and drive centre distance |
| ISO 5296-1-1989 |
同步皮带驱动.皮带.第1部分:节距号MXL、XL、L、H、XH和XXH;米制和英制尺寸 |
Synchronous belt drives; belts; part 1: pitch codes MXL, XL, L, H, XH and XXH; metric and inch dimensions |
| ISO 5296-2-1989 |
同步皮带驱动.皮带.第2部分:节距号MXL和XXL.米制尺寸 |
Synchronous belt drives; belts; part 2: pitch codes MXL and XXL; metric dimensions |
| ISO 53-1998 |
通用和重型机械的圆柱齿轮.标准基本齿条轮廓 |
Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| ISO 530-1975 |
飞机.一般用途推拉式单极断路器.尺寸 |
Aircraft; General purpose push-pull single-pole circuit-breakers; Dimensions |
| ISO 5302-2003 |
真空技术.涡轮分子泵.性能特征的测量 |
(Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics) |
| ISO 5302-2003 |
真空技术.涡轮分子泵.性能特征的测量 |
|
| ISO 5306-1983 |
肥料.取样报告的书写格式 |
Fertilizers; Presentation of sampling reports |
| ISO 5310-1986 |
肥料.钾含量的测定.滴定法 |
Fertilizers; Determination of potassium content; Titrimetric method |
| ISO 5311-1992 |
肥料.体(轻拍)密度测定 |
Fertilizers; determination of bulk density (tapped) |
| ISO 5313-1986 |
高含氮量的硝酸铵肥料.存油测定法 |
High nitrogen content, straight ammonium nitrate fertilizers; Determination or oil retention |
| ISO 5314-1981 |
肥料.氨型氮量的测定.蒸馏后滴定法 |
Fertilizers; Determination of ammoniacal nitrogen content; Titrimetric method after distillation |
| ISO 5315-1984 |
肥料.氮总含量的测定.蒸馏后滴定法 |
Fertilizers; Determination of total nitrogen content; Titrimetric method after distillation |
| ISO 5316-1977 |
肥料.水溶性磷酸盐的萃取 |
Fertilizers; Extraction of water-soluble phosphates |
| ISO 5317-1983 |
肥料.水溶性钾含量的测定.试验溶液的制备 |
Fertilizers; Determination of water-soluble potassium content; Preparation of the test solution |
| ISO 5318-1983 |
肥料.钾含量的测定.苯基硼酸钾重量分析法(参照法) |
Fertilizers; Determination of potassium content; Potassium tetraphenylborate gravimetric method (Reference method) |
| ISO 532-1975 |
声学.响度级的计算法 |
Acoustics; Method for calculating loudness level |
| ISO 5320-1980 |
实心木拼花地板.冷杉和云杉镶条的分类 |
Solid wood parquet; Classification of fir and spruce strips |
| ISO 5321-1978 |
拼花地板用针叶木块原材.一般特性 |
Coniferous wood raw parquet blocks; General characteristics |
| ISO 5323-1984 |
实心木块拼花地板和拼花地板料块.词汇.三种语言版 |
Solid wood parquet and raw parquet blocks; Vocabulary Trilingual edition |
| ISO 5326-1978 |
实心木铺砌块.硬木铺砌块.质量要求 |
Solid wood paving blocks; Hardwood paving blocks; Quality requirements |
| ISO 5327-1978 |
实心木铺砌块.一般特性 |
Solid wood paving blocks; General characteristics |
| ISO 5328-1978 |
实心木铺砌块.软木铺砌块.质量要求 |
Solid wood paving blocks; Softwood paving blocks; Quality requirements |
| ISO 5329-1978 |
实心木铺砌块.词汇.三种语言版 |
Solid wood paving blocks; Vocabulary Trilingual edition |
| ISO 5333-1978 |
拼花地板用针叶木块原材.拼花地板用冷杉和云杉木块的分类 |
Coniferous wood raw parquet blocks; Classification of fir and spruce parquet blocks |
| ISO 5334-1978 |
实心木拼花地板.船用松木条的分类 |
Solid wood parquet; Classification of maritime pine strips |
| ISO 534-1988 |
纸和纸板.单页纸厚度的测定(和纸板表观密度的计算) |
Paper and board; determination of thickness and apparent bulk density or apparent sheet density |
| ISO 5344-1980 |
产生振动的电动试验设备.描述设备特性的方法 |
Electrodynamic test equipment for generating vibration; Methods of describing equipment characteristics |
| ISO 5344-2004 |
电动振动产生设备.性能特性 |
|
| ISO 5347-10-1993 |
振动和冲击传感器的校正方法.第10部分:强烈冲击的一级校正法 |
Methods for the calibration of vibration and shock pick-ups; part 10: primary calibration by high impact shocks |
| ISO 5347-11-1993 |
振动和冲击传感器的校正方法.第11部分:横向振动灵敏度的试验 |
Methods for the calibration of vibration and shock pick-ups; part 11: testing of transverse vibration sensitivity |
| ISO 5347-12-1993 |
振动和冲击传感器的校准方法.第12部分:横向冲击灵敏性的检验 |
Methods for the calibration of vibration and shock pick-ups; part 12: testing of transverse shock sensitivity |
| ISO 5347-13-1993 |
振动和冲击传感器的校正方法.第13部分:基本应变灵敏度的试验 |
Methods for the calibration of vibration and shock pick-ups; part 13: testing of base strain sensitivity |
| ISO 5347-14-1993 |
振动和冲击传感器的校正方法.第14部分:钢滑轮上的无衰减加速度计的共振频率的试验 |
Methods for the calibration of vibration and shock pick-ups; part 14: resonance frequency testing of undamped accelerometers on a steel block |
| ISO 5347-15-1993 |
振动和冲击传感器的校正方法.第15部分:声学灵敏度试验 |
Methods for the calibration of vibration and shock pick-ups; part 15: testing of acoustic sensitivity |
| ISO 5347-16-1993 |
振动和冲击传感器的校正方法.第16部分:安装扭矩灵敏度试验 |
Methods for the calibration of vibration and shock pick-ups; part 16: testing of mounting torque sensitivity |
| ISO 5347-17-1993 |
振动和冲击传感器的校正方法.第17部分:固定温度灵敏度试验 |
Methods for the calibration of vibration and shock pick-ups; part 17: testing of fixed temperature sensitivity |
| ISO 5347-18-1993 |
振动和冲击传感器的校正方法.第18部分:瞬变温度灵敏度试验 |
Methods for the calibration of vibration and shock pick-ups; part 18: testing of transient temperature sensitivity |
| ISO 5347-19-1993 |
振动和冲击传感器的校正方法.第19部分:磁场灵敏度试验 |
Methods for the calibration of vibration and shock pick-ups; part 19: testing of magnetic field sensitivity |
| ISO 5347-22-1997 |
振动和冲击传感器的校准方法.第22部分:用普通方法对加速度计作共振试验 |
Methods for the calibration of vibration and shock pick-ups - Part 22: Accelerometer resonance testing - General methods |
| ISO 5347-3-1993 |
振动和冲击传感器的校正方法.第3部分:二级振动校正法 |
Methods for the calibration of vibration and shock pick-ups; part 3: secondary vibration calibration |
| ISO 5347-4-1993 |
振动和冲击传感器的校正方法.第4部分:二级冲击校正法 |
Methods for the calibration of vibration and shock pick-ups; part 4: secondary shock calibration |
| ISO 5347-5-1993 |
振动和冲击传感器的校正方法.第5部分:地球引力校正法 |
Methods for the calibration of vibration and shock pick-ups; part 5: calibration by earth`s gravitation |
| ISO 5347-6-1993 |
振动和冲击传感器的校正方法.第6部分:一级振动的低频校正法 |
Methods for the calibration of vibration and shock pick-ups; part 6: primary vibration calibration at low frequencies |
| ISO 5347-7-1993 |
振动和冲击传感器的校正方法.第7部分:离心力一级校正法 |
Methods for the calibration of vibration and shock pick-ups; part 7: primary calibration by centrifuge |
| ISO 5347-8-1993 |
振动和冲击传感器的校正方法.第8部分:双离心力一级校正法 |
Methods for the calibration of vibration and shock pick-ups; part 8: primary calibration by dual centrifuge |
| ISO 5348-1998 |
机械振动和冲击.加速计的机械安装 |
Mechanical vibration and shock - Mechanical mounting of accelerometers |
| ISO 5349-1-2001 |
机械振动.人体手臂传输振动的测量和评价.第1部分:通用要求 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements |
| ISO 5349-2-2001 |
机械振动.人体手臂传输振动的测量和评价.第2部分:在工作场所测量用实用指南 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement in the workplace |
| ISO 535-1991 |
纸和纸板.水吸收性测定.Cobb法 |
Paper and board; determination of water absorptiveness; Cobb method |
| ISO 5350-1 Technical Corrigendum 1-1999 |
纸浆.污物和碎片的测定.第1部分:试验室纸张的检验.技术勘误1 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets; Technical corrigendum 1 |
| ISO 5350-1-1998 |
纸浆.污物和碎片的测定.第1部分:实验室纸板的检验 |
Pulp - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets |
| ISO 5350-2 Technical Corrigendum 1-1999 |
纸浆.污物和碎片的测定.第2部分:磨碎片状纸浆.技术勘误1 |
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp; Technical corrigendum 1 |
| ISO 5350-2-1998 |
纸浆.污物和碎片的测定.第2部分:磨碎的片状纸浆的检验 |
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp |
| ISO 5350-3-1997 |
纸浆.污物和碎片的测定.第3部分:通过反射光检验 |
Pulps - Estimation of dirt and shives - Part 3: Inspection by reflected light |
| ISO 5351-1-1981 |
稀释液中的纤维素.有限粘度值的测定.第1部分:铜乙二氨(CED)溶液法 |
Cellulose in dilute solutions; Determination of limiting viscosity number; Part 1 : Method in cupri-ethylene-diamine (CED) solution |
| ISO 5351-2004 |
纸浆.铜乙二氨溶液中特性粘度值的测定 |
|
| ISO 5353-1995 |
农业和林业用土方机械、拖拉机和机械设备驾驶座标定点 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point |
| ISO 5355-1997 |
高山滑雪靴.安全要求和试验方法 |
Alpine ski-boots - Safety requirements and test methods |
| ISO 5356-1-1996 |
麻醉剂和呼吸设备.锥形连接器.第1部分:锥体和插孔 |
Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets |
| ISO 5356-1-2004 |
麻醉和呼吸设备.锥形接头.第1部分:锥体和锥套 |
|
| ISO 5356-2-1987 |
麻醉剂和呼吸设备.锥形连接器.第2部分:螺纹重力支承连接器 |
Anaesthetic and respiratory equipment; Conical connectors; Part 2 : Screw-threaded weight-bearing connectors |
| ISO 5358-1992 |
人用麻醉机 |
Anaesthetic machines for use with humans |
| ISO 5359-2000 |
医疗气体用低压软管部件 |
Low-pressure hose assemblies for use with medical gases |
| ISO 536-1995 |
纸和纸板.克数的测定 |
Paper and board - Determination of grammage |
| ISO 5360 Technical Corrigendum 1-1998 |
麻醉喷雾器.专用试剂灌充装置.技术勘误1 |
Anaesthetic vaporizers - Agent-specific filling systems; Technical Corrigendum 1 |
| ISO 5360-1993 |
麻醉喷雾器.专用试剂灌充装置 |
Anaesthetic vaporizers; agent-specific filling systems |
| ISO 5361-1999 |
麻醉和呼吸设备.导气管和连接件 |
Anaesthetic and respiratory equipment - Tracheal tubes and connectors |
| ISO 5361-4-1987 |
导气管.第4部分:柯尔(Cole)型 |
Tracheal tubes; Part 4 : Cole type |
| ISO 5362-2000 |
麻醉剂储存袋 |
Anaesthetic reservoir bags |
| ISO 5362-2000 |
麻醉剂储存袋 |
Anaesthetic reservoir bags |
| ISO 5364-2001 |
麻醉和呼吸设备.口咽部导气管 |
Anaesthetic and respiratory equipment - Oropharyngeal airways |
| ISO 5366-3 Technical Corrigendum 1-2003 |
麻醉和呼吸设备.气管造口术插管.第3部分:小儿气管造口术插管.技术勘误1 |
Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 3: Paediatric tracheostomy tubes; Technical Corrigendum 1 |
| ISO 5366-3 Technical Corrigendum 1-2003 |
麻醉和呼吸设备.气管造口术插管.第3部分:小儿气管造口术插管.技术勘误1 |
|
| ISO 5366-3-2001 |
麻醉和呼吸设备.气管造口术插管.第3部分:小儿气管造口术插管 |
Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 3: Paediatric tracheostomy tubes |
| ISO 5367-2000 |
麻醉仪器和通风机用呼吸管 |
Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| ISO 5372-1978 |
工业(包括食品工业)用浓缩磷酸盐.砷含量的测定.二乙基二硫代氨基甲酸银光度法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of arsenic content; Silver diethyldithiocarbamate photometric method |
| ISO 5373-1981 |
工业(包括食品工业)用浓缩磷酸盐.钙含量的测定.火焰原子吸收光谱测定法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of calcium content; Flame atomic absorption spectrometric method |
| ISO 5374-1978 |
工业(包括食品工业)用浓缩磷酸盐.氯化物含量的测定.电位滴定法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of chloride content; Potentiometric method |
| ISO 5375-1979 |
工业(包括食品工业)用浓缩磷酸盐.氮氧化物含量的测定.3,4-二甲苯酚分光光度法 |
Condensed phosphates for industrial use (including foodstuffs); Determination of oxides of nitrogen content; 3,4- Xylenol spectrophotometric method |
| ISO 5377-1981 |
水解淀粉制品.还原能力和葡萄糖当量的测定.莱恩和埃诺常量滴定法 |
Starch hydrolysis products; Determination of reducing power and dextrose equivalent; Lane and Eynon constant titre method |
| ISO 5378-1978 |
淀粉及其制品.用克耶达法测定氮含量.分光光度法 |
Starches and derived products; Determination of nitrogen content by the Kjeldahl method; Spectrophotometric method |
| ISO 5379-1983 |
淀粉及其制品.二氧化硫含量的测定.酸量滴定法和浊度测定法 |
Starches and derived products; Determination of sulfur dioxide content; Acidimetric method and nephelometric method |
| ISO 5381-1983 |
水解淀粉制品.水含量的测定.改进的卡尔.费歇尔(Kas Figches)法 |
Starch hydrolysis products; Determination of water content; Modified Karl Fischer method |
| ISO 5388-1981 |
固定式空气压缩机.安全规则和实用规范 |
Stationary air compressors; Safety rules and code of practice |
| ISO 5389-1992 |
涡轮压缩机.性能试验规程 |
Turbocompressors; performance test code |
| ISO 5390-1977 |
压缩机.分类.两种语言版 |
Compressors; Classification Bilingual edition |
| ISO 5391-2003 |
风动工具和机器.词汇 |
|
| ISO 5393-1994 |
螺纹紧固件用旋转式装配工具.性能试验方法 |
Rotary tools for threaded fasteners - Performance test method |
| ISO 5395 AMD 1-1992 |
动力剪草机,草坪拖拉机,草坪和园艺拖拉机,专用割草机和带割草装置的草坪和园艺拖拉机.定义,安全要求和试验规程.修改件1 |
Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments; definitions, safety requirements and test procedures; amendment 1 |
| ISO 5395-1990 |
动力剪草机、草坪拖拉机、草坪和园艺拖拉机、专用割草机和带割草装置的草坪和园艺拖拉机.定义.安全要求和试验规程 |
Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments; definitions; safety requirements and test procedures |
| ISO 5396-1977 |
硬质合金的镦锻模.术语.两种语言版 |
Hardmetal heading dies; Terminology Bilingual edition |
| ISO 5397-1984 |
皮革.氮含量和皮质”含量的测定.滴定法 |
Leather; Determination of nitrogen content and hide substance; Titrimetric method |
| ISO 5399-1984 |
皮革.水溶性镁盐的测定.乙二胺四乙酸滴定法 |
Leather; Determination of water-soluble magnesium salts; EDTA titrimetric method |
| ISO 54-1996 |
通用机械和重型机械的圆柱齿轮.模数和径节 |
Cylindrical gears for general engineering and for heavy engineering - Modules |
| ISO 540-1995 |
固体矿物燃料.煤灰熔融性的测定.高温管法 |
Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method |
| ISO 5400-1984 |
皮革.硅总含量的测定.还原硅钼酸盐光谱测定法 |
Leather; Determination of total silicon content; Reduced molybdosilicate spectrometric method |
| ISO 5402-2002 |
皮革.物理和机械试验.用挠曲计测定抗弯性 |
Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method |
| ISO 5403-2002 |
皮革.物理和机械试验.柔性皮革的耐水性测定 |
Leather - Physical and mechanical tests - Determination of water resistance of flexible leather |
| ISO 5404-2002 |
皮革.物理和机械试验.厚革的耐水性测定 |
Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers |
| ISO 5407-1981 |
用于镦锻模的烧结硬质合金片.尺寸和公差 |
As-sintered hardmetal pellets used in heading dies; Dimensions and tolerances |
| ISO 5408-1983 |
柱面螺纹.词汇.两种语言版 |
Cylindrical screw threads; Vocabulary Bilingual edition |
| ISO 5413-1993 |
机床.莫氏锥度强制传动 |
Machine tools; positive drive of morse tapers |
| ISO 5414-1-2002 |
扁方柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第1部分:刀柄驱动系统的尺寸 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks |
| ISO 5414-2-2002 |
扁方柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第2部分:夹头的连接尺寸和名称与符号 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation |
| ISO 5415-1977 |
7/24外锥度和莫氏内锥度的异径连接套 |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw |
| ISO 5416-1997 |
直接还原铁.金属铁含量的测定.溴-甲醇滴定法 |
Direct reduced iron - Determination of metallic iron content - Bromine-methanol titrimetric method |
| ISO 5417-1986 |
用于旋转窑的耐火砖.尺寸 |
Refractory bricks for use in rotary kilns; Dimensions |
| ISO 5418-1-1994 |
铁矿石.铜含量的测定.第1部分:2,2`-吡奎瑙拉基(Biquinolyl)分光光度法 |
Iron ores - Determination of copper content - Part 1: 2,2`-Biquinolyl spectrophotometric method |
| ISO 5419 Technical Corrigendum 1-1996 |
麻花钻.术语.定义和类型.技术勘误1 |
Twist drills - Terms, definitions and types; Technical corrigendum 1 |
| ISO 5419-1982 |
麻花钻.术语、定义和类型.两种语言版 |
Twist drills; Terms, definitions and types Bilingual edition |
| ISO 542-1990 |
油料种子.取样 |
Oilseeds; sampling |
| ISO 5420-1983 |
铰刀.术语,定义和类型.两种语言版 |
Reamers; Terms, definitions and types Bilingual edition |
| ISO 5421-1977 |
精磨的高速钢刀刃 |
Ground high speed steel tool bits |
| ISO 5422-1982 |
道路车辆.拖缆,缆绳或棒的固定 |
Road vehicles; Anchorages for towing ropes, cables or bars |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com