标准号 |
中文名称 |
英文名称 |
ISO 15616-3-2003 |
高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正 |
|
ISO 15618-1-2001 |
水下焊接的焊工资格测试.第1部分:超高压湿焊的潜水焊工 |
Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding |
ISO 15618-2-2001 |
水下焊接的焊工资格测试.第2部分:超高压干焊的潜水焊工和焊接操作员 |
Qualification testing of welders for underwater welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding |
ISO 1562-1993 |
牙科用铸金合金 |
Dental casting gold alloys |
ISO 1562-2004 |
牙科.铸金合金 |
|
ISO 15620-2000 |
焊接.金属材料的摩擦焊接 |
Welding - Friction welding of metallic materials |
ISO 15621-1999 |
吸尿辅助器.评定的一般指南 |
Urine-absorbing aids - General guidance on evaluation |
ISO 15622-2002 |
运输信息和控制系统.自适配式车速控制系统.性能要求和试验程序 |
Transport information and control systems - Adaptive Cruise Control systems - Performance requirements and test procedures |
ISO 15623-2002 |
运输信息和控制系统.前方车辆碰撞警告系统.性能要求和试验程序 |
Transport information and control systems - Forward vehicle collision warning systems - Performance requirements and test procedures |
ISO 15629-2002 |
物料搬运托盘.新托盘组件和用过的木制平托盘检修用紧固件质量 |
Pallets for material handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
ISO 1563-1990 |
藻酸盐牙印模材料 |
Dental alginate impression material |
ISO 15630-1-2002 |
混凝土的钢筋和预应力用钢.试验方法.第1部分:加筋棒、钢丝杆和钢丝 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire |
ISO 15630-2-2002 |
混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric |
ISO 15630-3-2002 |
混凝土的钢筋和预应力用钢.试验方法.第3部分:预应力钢 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel |
ISO 15632-2002 |
微光束分析.带半导体探测器的能量发散X射线分光仪的仪器规范 |
Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors |
ISO 15635-2001 |
涂覆磨料.风门盘 |
Coated abrasives - Flap discs |
ISO 15636-2003 |
刚纸研磨盘用备用垫片 |
(Back-up pads for vulcanized fibre discs) |
ISO 15636-2003 |
刚纸研磨盘用备用垫片 |
|
ISO 15637-1-2002 |
圆柱形研磨套筒支承夹具.第1部分:手动砂轮机用带柄的支承夹具 |
Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand held grinding machines |
ISO 15637-2-2002 |
圆柱形研磨套筒支承夹具.第2部分:固定机械的支承夹具 |
Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines |
ISO 1564-1995 |
水化牙科琼脂基印模材料 |
Dental aqueous impression materials based on agar |
ISO 15641-2001 |
高速切削机床用铣刀.安全要求 |
Milling cutters for high speed machining - Safety requirements |
ISO 15642-2003 |
道路建筑和维护设备.沥青混合设备.术语和商业规范 |
(Road construction and maintenance equipment - Asphalt mixing plants - Terminology and commercial specifications) |
ISO 15642-2003 |
道路建筑和维护设备.沥青混合设备.术语和商业规范 |
|
ISO 15643-2002 |
道路建筑和养护设备.沥青粘合剂布料/喷料机.术语和商业规范 |
Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications |
ISO 15644-2002 |
道路建筑和维修设备. 碎屑延辗机.术语和商业规范 |
Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications |
ISO 15645-2002 |
道路建筑和维修设备. 路面切槽机.术语和商业规范 |
Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications |
ISO 15647-2004 |
核能.六氟化铀的同位素分析.双标准气源质谱法 |
|
ISO 15648-2004 |
黄油.盐含量的测定.电位测量法 |
|
ISO 15649-2001 |
石油和天然气工业.管线 |
Petroleum and natural gas industries - Piping |
ISO 15652-2003 |
小艇.小型喷水推进艇舱内用遥控操纵系统 |
(Small craft - Remote steering systems for inboard mini jet boats) |
ISO 15652-2003 |
小艇.小型喷水推进艇舱内用遥控操纵系统 |
|
ISO 15652-2003 |
小艇.小型喷水推进艇舱内用遥控操纵系统 |
|
ISO 15654-2004 |
传输精度滚子链的疲劳试验方法 |
|
ISO 15654-2004 |
传输精度滚子链的疲劳试验方法 |
|
ISO 15663-1-2000 |
石油和天然气工业.寿命周期价格.第1部分:方法学 |
Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology |
ISO 15663-2-2001 |
石油和天然气工业.寿命周期价格.第2部分:方法学的应用和计算方法指南 |
Petroleum and natural gas industries - Life cycle costing - Part 2: Guidance on application of methodology and calculation methods |
ISO 15663-3-2001 |
石油和天然气工业.生命周期成本计算.第3部分:实施导则 |
Petroleum and natural gas industries - Life-cycle costing - Part 3: Implementation guidelines |
ISO 15664-2001 |
声学.露天设备噪声控制设计程序 |
Acoustics - Noise control design procedures for open plant |
ISO 15665 Technical Corrigendum 1-2004 |
声学.管道、阀门和法兰的隔音.技术勘误1 |
|
ISO 15665-2003 |
声学.管、阀和法兰隔声 |
(Acoustics - Acoustic insulation for pipes, valves and flanges) |
ISO 15665-2003 |
声学.管、阀和法兰隔声 |
|
ISO 15667-2000 |
声学.由外壳和舱室控制噪声的指南 |
Acoustics - Guidelines for noise control by enclosures and cabins |
ISO 15668-1999 |
银行业务.安全文件传输(零售) |
Banking - Secure file transfer (retail) |
ISO 1567 AMD 1-2003 |
牙科学.义齿基托聚合物.修改件1 |
(Dentistry - Denture base polymers; Amendment 1) |
ISO 1567 AMD 1-2003 |
牙科学.义齿基托聚合物.修改件1 |
|
ISO 1567-1999 |
牙科学.假牙基料聚合物 |
Dentistry - Denture base polymers |
ISO 15671-2000 |
橡胶和橡胶添加剂.用自动分析仪测定硫的总含量 |
Rubber and rubber additives - Determination of total sulfur content using an automatic analyser |
ISO 15672-2000 |
橡胶和橡胶添加剂.用自动分析仪测定氮的总含量 |
Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser |
ISO 15674-2001 |
心脏脉管植入物和人工器官.硬壳式心脏/静脉存储系统(有/无过滤器)和软静脉储血袋 |
Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
ISO 15675-2001 |
心脏脉管和人工器官.心脉旁通系统.动脉血过滤器 |
Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters |
ISO 15680-2003 |
水质.用purge-and-trap和热解析作用对单环芳香烃、萘和不同氯化物的气相色谱分析测定 |
|
ISO 15681-1-2003 |
水质.用流量分析(FIA和CFA)法测定正磷酸盐和含磷总量.第1部分:流量注入分析法(FIA) |
|
ISO 15681-1-2003 |
水质.用流量分析(FIA和CFA)法测定正磷酸盐和含磷总量.第1部分:流量注入分析法(FIA) |
|
ISO 15681-2-2003 |
水质.用流量分析(FIA和CFA)法测定正磷酸盐和含磷总量.第2部分:连续流量分析法(CFA) |
|
ISO 15681-2-2003 |
水质.用流量分析(FIA和CFA)法测定正磷酸盐和含磷总量.第2部分:连续流量分析法(CFA) |
|
ISO 15682-2000 |
水质.通过流量分析(CFA和FIA)和光度测量或电势检测法测定氯化物含量 |
Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
ISO 15685-2004 |
土壤质量.潜在氮化合物和氮化合物的抑止物的测定.铵氧化物的快速试验 |
|
ISO 15686-1-2000 |
建筑物和建筑构件.使用寿命计划.第1部分:总则 |
Buildings and constructed assets - Service life planning - Part 1: General principles |
ISO 15686-2-2001 |
建筑物和建筑构件.使用寿命计划.第2部分:使用寿命预测过程 |
Buildings and constructed assets - Service life planning - Part 2: Service life prediction procedures |
ISO 15686-3-2002 |
房屋和建筑资产.服务年限计划.第3部分:性能审核和检验 |
Building and constructed assets - Service life planning - Part 3: Performance audits and reviews |
ISO 15686-6-2004 |
房屋和建筑资产.服务寿命规划.第6部分:考虑环境影响的规程 |
|
ISO 15688-2003 |
道路建设和维护设备.土壤稳定剂.术语和商用规范 |
(Road construction and maintenance equipment - Soil stabilizers - Terminology and commercial specifications) |
ISO 15688-2003 |
道路建设和维护设备.土壤稳定剂.术语和商用规范 |
|
ISO 15689-2003 |
道路建造和维护设备.粉状铺路沥青用摊铺机.术语和商业规范 |
(Road construction and maintenance equipment - Powder binder spreaders - Terminology and commercial specifications) |
ISO 15689-2003 |
道路建造和维护设备.粉状铺路沥青用摊铺机.术语和商业规范 |
|
ISO 15695 Technical Corrigendum 1-2000 |
釉层和搪瓷.末涂瓷漆耐划痕性的测定.技术勘误1 |
Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes; Technical Corrigendum 1 |
ISO 15695-2000 |
釉层和搪瓷.搪瓷涂层耐划痕性的测定 |
(Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes) |
ISO 157-1996 |
煤.各种硫类型的测定 |
Coal - Determination of forms of sulfur |
ISO 1570-1975 |
锌和锌合金.锡含量的测定.分光光度法 |
(Zinc and zinc alloys; Determination of tin content; Spectrophotometric method) |
ISO 15700-1998 |
皮革.色牢度试验.耐水斑点色牢度 |
(Leather - Tests for colour fastness - Colour fastness to water spotting) |
ISO 15701-1998 |
皮革.色牢度试验.受聚氯乙烯影响的色牢度 |
(Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride)) |
ISO 15702-1998 |
皮革.色牢度试验.机洗对色牢度的影响 |
Leather - Tests for colour fastness - Colour fastness to machine washing |
ISO 15703-1998 |
皮革.色牢度试验.轻柔洗涤对色牢度的影响 |
Leather - Tests for colour fastness - Colour fastness to mild washing |
ISO 15704-2000 |
工业自动化系统.计划参考建筑和方法学的要求 |
Industrial automation systems - Requirements for enterprise-reference architectures and methodologies |
ISO 15705-2002 |
水质.化学需氧量的测定(ST-COD).小型密封管法 |
Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method |
ISO 15706-2002 |
信息和文献工作.国际标准视听数码(ISAN) |
Information and documentation - International Standard Audiovisual Number (ISAN) |
ISO 15707-2001 |
信息和文献学.国际标准音乐管理代码(ISWC) |
Information and documentation - International Standard Musical Work Code (ISWC) |
ISO 15708-2-2002 |
无损检验.辐射法.计算机断层摄影.第2部分:检验的实施规程 |
Non-destructive testing - Radiation methods - Computed tomography - Part 2: Examination practices |
ISO 15709-2002 |
土质.土壤水分和未饱和生物圈.定义,符号和理论 |
Soil quality - Soil water and the unsaturated zone - Definitions, symbols and theory |
ISO 15710-2002 |
涂料和清漆.在缓冲氯化钠溶液中反复腐蚀以及从该溶液中清除的腐蚀试验 |
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
ISO 15711-2003 |
色漆和清漆.曝露于海水中覆层的耐阴极解粘合作用的测定 |
(Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water) |
ISO 15711-2003 |
色漆和清漆.曝露于海水中覆层的耐阴极解粘合作用的测定 |
|
ISO 15715-2003 |
涂料和清漆用粘合剂.混浊度的测定 |
Binders for paints and varnishes - Determination of turbidity |
ISO 15715-2003 |
涂料和清漆用粘合剂.混浊度的测定 |
|
ISO 15715-2003 |
涂料和清漆用粘合剂.混浊度的测定 |
|
ISO 15717-1998 |
厨房家具.厨柜和工作台的安全技术要求和试验方法 |
Kitchen equipment - Safety requirements and test methods for kitchen cabinets and work tops |
ISO 1572-1980 |
茶叶.已知干物质含量的研碎样品的制备 |
Tea; Preparation of ground sample of known dry matter content |
ISO 15720-2001 |
金属涂层.孔隙率试验.胶材料电版术法测定金属衬底上金和钯涂层孔隙度 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography |
ISO 15721-2001 |
金属涂层.孔隙率试验.用亚硫酸和二氧化硫蒸气对金和钯涂层孔隙率的测定 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour |
ISO 15724-2001 |
金属和其它无机涂层.钢中可扩散氢的电化学测量.Barnacle电极法 |
Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method |
ISO 1573-1980 |
茶叶.103℃时质量损失的测定 |
Tea; Determination of loss in mass at 103 degrees C |
ISO 15730-2000 |
金属和其他无机涂层.用电抛光精加工和钝化不锈钢 |
Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel |
ISO 15732-2003 |
精细陶瓷(高级陶瓷、高级工业陶瓷).室温下用单边预裂束法(SEPB)测定块体陶瓷破裂韧性的试验方法 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method) |
ISO 15732-2003 |
精细陶瓷(高级陶瓷、高级工业陶瓷).室温下用单边预裂束法(SEPB)测定块体陶瓷破裂韧性的试验方法 |
|
ISO 15732-2003 |
精细陶瓷(高级陶瓷、高级工业陶瓷).室温下用单边预裂束法(SEPB)测定块体陶瓷破裂韧性的试验方法 |
|
ISO 15733-2001 |
精细陶瓷(高级陶瓷和高级工程陶瓷).室温下测定连续纤维增强合成物的抗拉伸应力-应变性能的试验方法 |
Fine ceramics (advanced ceramis, advanced technical ceramics) - Test method for tensile stress-strain behaviour of continuous, fibre-reinforced composites at room temperature |
ISO 15734-2001 |
船舶和造船技术.静水压力释放装置 |
Ships and marine technology - Hydrostatic release units |
ISO 15738-2002 |
船舶与海上技术.充气救生装置用充气系统 |
Ships and marine technology - Gas inflation systems for inflatable life-saving appliances |
ISO 15739-2003 |
摄影.电子静止图象成像.噪声测量 |
(Photography - Electronic still-picture imaging - Noise measurements) |
ISO 15739-2003 |
摄影.电子静止图象成像.噪声测量 |
|
ISO 15741-2001 |
涂料和清漆.水上和水下无腐蚀气体管道内侧的减小摩擦涂层 |
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases |
ISO 15744-2002 |
手持非电动工具.噪声测量代码.工程法(2级) |
Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
ISO 15745-1-2003 |
工业自动化系统和集成.开放系统应用集成框架.第1部分:一般参考说明 |
(Industrial automation systems and integration - Open systems application integration framework - Part 1: Generic reference description ) |
ISO 15745-1-2003 |
工业自动化系统和集成.开放系统应用集成框架.第1部分:一般参考说明 |
|
ISO 15745-2-2003 |
工业自动化系统和集成.开放系统应用集成框架.第2部分:基于ISO 11898的控制系统所使用的参考性描述 |
(Industrial automation systems and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems) |
ISO 15745-2-2003 |
工业自动化系统和集成.开放系统应用集成框架.第2部分:基于ISO 11898的控制系统所使用的参考性描述 |
|
ISO 15745-3-2003 |
工业自动化系统和集成.开放系统应用集成框架.第3部分:基于IEC 61158的控制系统所使用的参考性描述 |
(Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems) |
ISO 15745-3-2003 |
工业自动化系统和集成.开放系统应用集成框架.第3部分:基于IEC 61158的控制系统所使用的参考性描述 |
|
ISO 15745-4-2003 |
工业自动化系统和集成.开放系统应用集成框架.第4部分:基于以太网的控制系统所使用的参考性描述 |
(Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems) |
ISO 15745-4-2003 |
工业自动化系统和集成.开放系统应用集成框架.第4部分:基于以太网的控制系统所使用的参考性描述 |
|
ISO 15747-2003 |
静脉注射用塑料容器 |
(Plastics containers for intravenous injection) |
ISO 15747-2003 |
静脉注射用塑料容器 |
|
ISO 15747-2003 |
静脉注射用塑料容器 |
|
ISO 15747-2003 |
静脉注射用塑料容器 |
|
ISO 15748-1-2002 |
船舶和海运技术.在船上和海上建筑物上饮用水的供应.第1部分:计划和设计 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design |
ISO 15748-2-2002 |
船舶和海运技术.在船上和海上建筑物上饮用水的供应.第2部分:计算方法 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation |
ISO 15749-1-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第1部分:卫生排水系统设计 |
|
ISO 15749-2-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道 |
|
ISO 15749-3-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道 |
|