标准号 |
中文名称 |
英文名称 |
BS ISO 14648-2-2002 |
显微摄影.使用单独的内部显示系统的产生图像的COM记录装置的质量控制.使用方法 |
Micrographics - Quality control of COM recorders that generate images using a single internal display system - Method of use |
BS ISO 14654-2000 |
混凝土增强用环氧树脂涂覆钢 |
(Epoxy-coated steel for the reinforcement of concrete) |
BS ISO 14656-2000 |
混凝土加筋用钢的涂层的环氧树脂粉末和密封材料 |
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
BS ISO 14661-2000 |
工业用热涡轮机(蒸气涡轮机、气体膨胀式轮机).一般要求 |
Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements |
BS ISO 14663-1-2002 |
塑料.乙烯/乙烯醇共聚物模塑和压塑材料.命名系统和基本规范 |
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Designation system and basis for specifications |
BS ISO 14663-2-2002 |
塑料.乙烯/乙烯醇共聚物模塑和压塑材料.式样制备和性能测定 |
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties |
BS ISO 14674-2005 |
奶和奶粉.黄曲霉毒素M1含量的测定.免疫亲和色谱法清洁和薄层色谱法测定 |
|
BS ISO 14681-1998 |
柴油发动机.燃料喷射泵试验.燃料喷嘴的校正 |
Diesel engines - Fuel injection pump testing - Calibrating fuel injectors |
BS ISO 14686-2003 |
液体比重的测定.水井的泵送试验.设计、性能和使用的考虑和指南 |
(Hydrometric determinations - Pumping tests for water wells - Considerations and guidelines for design, performance and use) |
BS ISO 14695-2003 |
通用风机.风机振动的测量方法 |
(Fans for general purposes - Method of measurement of fan vibration) |
BS ISO 14706-2001 |
表面化学分析.全反射X射线荧光(TXRF)光谱法测定硅片的表面原子污染 |
Surface chemical analysis - Determination of surface elemental contamination on silicon wafers by total-reflection X-ray flourescence (TXRF) spectroscopy |
BS ISO 14707-2000 |
表面化学分析.辉光放电发射光谱.使用介绍 |
Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use |
BS ISO 14711-2003 |
航天系统.不载人运行的概念产品.定义和评定概念产品指南 |
(Space systems - Unmanned mission operations concepts - Guidelines for defining and assessing concept products) |
BS ISO 14714-2001 |
香精油和芳族萃取物.残留苯含量测定 |
Essential oils and aromatic extracts - Determination of residual benzene content |
BS ISO 14721-2003 |
航天数据和信息传输系统.开放式档案信息系统.参考模式 |
(Space data and information transfer systems - Open archival information systems - Reference model) |
BS ISO 14726-1-2000 |
船只和船上技术.管道系统容量的识别颜色.主要颜色和媒介 |
Ships and marine technology. Identification colours for the content of piping systems. Main colours and media |
BS ISO 14728-1-2004 |
滚动轴承.线性运动滚动轴承.动态荷载额定值和额定寿命 |
|
BS ISO 14728-2-2004 |
滚动轴承.线性运动滚动轴承.静态荷载额定值 |
|
BS ISO 14740-1998 |
林业机械.灌木切削机、草地修剪机、杆材切削机及类似设备用背负式电源驱动装置.安全要求和试验 |
Forestry machinery - Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances - Safety requirements and testing |
BS ISO 14743-2004 |
气压传动.热塑性管道用插入式连接件 |
|
BS ISO 14792-2003 |
道路车辆.重型商用车辆和公共汽车.稳态循环试验 |
(Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests) |
BS ISO 14793-2003 |
道路车辆.重型商用车辆和汽车.横向瞬态响应试验方法 |
(Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods) |
BS ISO 14794-2003 |
大型商用车辆和客车.转弯制动.开环试验方法 |
(Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods) |
BS ISO 14807-2001 |
摄影.透射和反射光密度计.性能测定法 |
Photography - Transmission and reflection densitometers - Method for determining performance |
BS ISO 14808-1998 |
摄影.135胶片盒的组成 |
(Photography - Composition of 135-film canisters) |
BS ISO 14835-1-2005 |
机械振动和冲击.末梢血管功能评定用冷刺激试验.手指皮肤温度的测量和评价 |
|
BS ISO 14837-1-2005 |
机械振动.由铁路系统产生的地面噪音和振荡.一般指南 |
|
BS ISO 14839-1-2002 |
机械振动.有主动磁性轴承的旋转机械装置.词汇 |
(Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Vocabulary) |
BS ISO 14839-2-2004 |
机械振动.装有主动磁性轴承的旋转机械的振动.振动评价 |
|
BS ISO 14839-2-2004 |
机械振动.装有主动磁性轴承的旋转机械的振动.振动评价 |
|
BS ISO 14848-1998 |
塑料.不饱和聚酯树脂.130℃时反应性测定 |
Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 鳦 |
BS ISO 14849-1999 |
塑料.苯酚甲醛注模.自由氨和胺化合物的测定.靛酚法 |
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Indophenol method |
BS ISO 14850-1-2004 |
核能.废弃物包装件的活性测量.带公开几何条件的整体模型中的高分辨率γ光谱测定法 |
|
BS ISO 14851-1999 |
水生介质中塑料材料极端好气菌生物降解性的测定.在一封闭呼吸器中测定氧需求的方法 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
BS ISO 14852-1999 |
水生介质中塑料材料极端好气菌生物降解性的测定.提高二氧化碳的分析法 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
BS ISO 14853-2005 |
塑料.含水系统中塑料材料的最大厌氧生物降解能力的测定.生物气产生的测量方法 |
|
BS ISO 14855-1999 |
在控制复合条件下塑料材料极端好气菌生物降解性和非集合性的测定.提高二氧化碳分析的方法 |
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide |
BS ISO 14856-2001 |
计时计.手表壳.无表带环式手表的固定尺寸 |
Timekeeping instruments - Wristwatch cases - Fixing dimensions of non-spring-bar types |
BS ISO 14865-1998 |
林业机械.背负内燃机驱动的便携式手持灌木铲除机和草地修剪机.安全要求和试验 |
Machinery for forestry - Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source - Safety requirements and testing |
BS ISO 14869-2-2002 |
土壤分析.测定总素含量的溶解度.碱性溶解物的溶解 |
Soil quality - Dissolution for the determination of total element content - Dissolution by alkaline fusion |
BS ISO 14879-1-2000 |
外科植入物.完全的膝关节修复物.胫骨支架耐用特性的测定 |
Implants for surgery - Total knee-joint prostheses - Determination of endurance properties of knee tibial trays |
BS ISO 14880-1-2001 |
显微透镜配置.词汇 |
Microlens array - Vocabulary |
BS ISO 14881-2001 |
集成光学.接口.与耦合特性有关的参数 |
Integrated optics - Interfaces - Parameters relevant to coupling properties |
BS ISO 14887-2001 |
样品制备.液体中粉末的分散程序 |
Sample preparation - Dispersing procedures for powders in liquids |
BS ISO 14892-2005 |
脱脂奶粉.高效液相色谱法测定维生素D的含量 |
|
BS ISO 14892-2005 |
脱脂奶粉.高效液相色谱法测定维生素D的含量 |
|
BS ISO 14897-2002 |
塑料.生产聚氨酯用多醇.水含量测定 |
Plastics - Polyols for use in the production of polyurethane - Determination of water content |
BS ISO 14898-1999 |
塑料.聚氨酯生材料.芳香异氰酸酯.酸度测定 |
Plastics - Polyurethane raw materials - Aromatic isocyanates - Determination of acidity |
BS ISO 14899-2001 |
塑料.聚氨酯生产用多醇.碱度测定 |
Plastics - Polyols for use in the production of polyurethane - Determination of basicity |
BS ISO 14900-2001 |
塑料.聚氨酯生产用多醇.羟基值测定 |
Plastics - Polyols for use in the production of polyurethane - Determination of hydroxyl number |
BS ISO 14910-1-1998 |
塑料.热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体.命名体系和规范基础 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Designation system and basis for specifications |
BS ISO 14910-2-1998 |
塑料.热塑聚酯/聚醚和聚酯/聚醚铸模和挤压弹性体.试样制备和性能测定 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties |
BS ISO 14912-2003 |
气体分析.气体混合成份数据的转换 |
(Gas analysis - Conversion of gas mixture composition data) |
BS ISO 14943-2004 |
核燃料技术.核临界安全的相关管理标准 |
|
BS ISO 14949-2001 |
外科植入物.两节附加加工的硅弹性体 |
Implants for surgery - Two-part addition-cure silicone elastomers |
BS ISO 14950-2004 |
航天系统.不载人航天器的可操作性 |
|
BS ISO 14951-1-1999 |
航天系统.流体特性.氧 |
Space systems - Fluid characteristics - Oxygen |
BS ISO 14951-10-1999 |
航天系统.流体特性.水 |
Space systems - Fluid characteristics - Water |
BS ISO 14951-11-1999 |
航天系统.流体特性.氨 |
Space systems - Fluid characteristics - Ammonia |
BS ISO 14951-12-1999 |
航天系统.流体特性.二氧化碳 |
Space systems - Fluid characteristics - Carbon dioxide |
BS ISO 14951-13-1999 |
航天系统.流体特性.呼吸用空气 |
Space systems - Fluid characteristics - Breathing air |
BS ISO 14951-2-1999 |
航天系统.流体特性.氢推进剂 |
Space systems - Fluid characteristics - Hydrogen propellant |
BS ISO 14951-3-1999 |
航天系统.流体特性.氮 |
Space systems - Fluid characteristics - Nitrogen |
BS ISO 14951-4-1999 |
航天系统.流体特性.氦 |
Space systems - Fluid characteristics - Helium |
BS ISO 14951-5-1999 |
航天系统.流体特性.四氧化氮推进剂 |
Space systems - Fluid characteristics - Nitrogen tetroxide propellant |
BS ISO 14951-6-1999 |
航天系统.流体特性.一甲基联氨推进剂 |
Space systems - Fluid characteristics - Monomethylhydrazine propellant |
BS ISO 14951-7-1999 |
航天系统.流体特性.联氨推进剂 |
Space systems - Fluid characteristics - Hydrazine propellant |
BS ISO 14951-8-1999 |
航天系统.流体特性.煤油推进剂 |
Space systems - Fluid characteristics - Kerosene propellant |
BS ISO 14951-9-1999 |
航天系统.流体特性.氩 |
Space systems - Fluid characteristics - Argon |
BS ISO 14952-1-2004 |
航天系统.液体系统的表面清洁度.词汇 |
|
BS ISO 14952-2-2004 |
航天系统.液体系统的表面清洁度.清洁度等级 |
|
BS ISO 14952-3-2004 |
航天系统.液体系统的表面清洁度.不挥发性残流物和颗粒污染物的测定用分析程序 |
|
BS ISO 14952-4-2004 |
航天系统.液体系统的表面清洁度.粗略清洁过程 |
|
BS ISO 14952-4-2004 |
航天系统.液体系统的表面清洁度.粗略清洁过程 |
|
BS ISO 14952-5-2004 |
航天系统.液体系统的表面清洁度.干燥过程 |
|
BS ISO 14952-6-2004 |
航天系统.液体系统的表面清洁度.精确清洁过程 |
|
BS ISO 14953-2000 |
航天系统.结构设计.发射的飞行器静态合格性试验用负载水平的测定 |
Space systems - Structural design - Determination of loading levels for static qualification testing of launch vehicles |
BS ISO 1496-2-1997 |
第1系列货运集装箱.规范和试验.保温集装箱 |
(Series 1 freight containers - Specification and testing - Thermal containers) |
BS ISO 1496-3-1995 |
货运集装箱系列1.规范和试验.第3部分:液体、气体和加压散料用罐式集装箱 |
Series 1 freight containers - Specification and testing - Tank containers for liquids, gases and pressurized dry bulk |
BS ISO 1496-4-1995 |
货运集装箱系列1.规范和试验.不加压的散料集装箱 |
Series 1 freight containers - Specification and testing - Non-pressurized containers for dry bulk |
BS ISO 14961-2002 |
空间数据和信息传输系统.参数值语言规范 |
Space data and information transfer systems - Parameter value language specification |
BS ISO 14964-2001 |
机械振动.固定结构的振动.振动的测量和评价中质量管理的特殊要求 |
Mechanical vibration and shock - Vibration of stationary structures - Specific requirements for quality management in measurement and evaluation of vibration |
BS ISO 14965-2000 |
环境空气.全部无甲烷有机化合物的测定.低温预浓缩和直接火焰电离探测法 |
Ambient air - Determination of total non-methane organic compounds - Cryogenic preconcentration and direct flame ionization detection method |
BS ISO 14966-2002 |
环境空气.无机纤维颗粒的数值浓度的测定.扫描电子显微镜检查法 |
Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
BS ISO 14968-2000 |
纸和纸板.切割尺寸办公室用纸.一包纸卷曲的测量 |
Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets |
BS ISO 14972-1999 |
带over-needle外部管内导管的一次性灭菌塞 |
Sterile obturators for single use with over-needle peripheral intravascular catheters |
BS ISO 14975-2001 |
表面化学分析.信息格式 |
Surface chemical analysis - Information formats |
BS ISO 14976-1998 |
表面化学分析.数据传送格式 |
Surface chemical analysis - Data transfer format |
BS ISO 14985-1999 |
工程图纸的硬拷贝输出.控制文件的结构规范 |
Hard-copy output of engineering drawings - Specification for the structure of control files |
BS ISO 14997-2003 |
光学和光学仪器.测定光学件表面缺陷的试验方法 |
(Optics and optical instruments - Test methods for surface imperfections of optical elements) |
BS ISO 15-1998 |
滚动轴承.径向轴承.边界尺寸,一般计划 |
Rolling bearings - Radial bearings - Boundary dimensions, general plan |
BS ISO 15001-2003 |
麻醉和呼吸设备.与氧气的兼容性 |
(Anaesthetic and respiratory equipment - Compatibility with oxygen) |
BS ISO 15009-2002 |
土壤质量.挥发性香料烃类物质、萘和卤化烃含量的气相色谱分析测定.有热解吸作用的洗涤和打击法 |
Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorption |
BS ISO 15010-1998 |
输液和输注瓶用一次性悬吊装置.要求和试验方法 |
Disposable hanging devices for transfusion and infusion bottles - Requirements and test methods |
BS ISO 15016-2002 |
船舶和海上技术.用速度试验数据分析法对速度和动力性能的评定导则 |
Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data |
BS ISO 15022-1-1999 |
证券.文电图解(数据区字典).数据区和文电设计规则和导则 |
Securities - Scheme for messages (data field dictionary) - Data field and message design rules and guidelines |
BS ISO 15022-2-1999 |
证券.文电图解(数据区字典).数据区字典和文电目录的维护. |
Securities - Scheme for messages (data field dictionary) - Maintenance of the data field dictionary and catalogue of messages |
BS ISO 15023-1-2002 |
塑料.聚乙烯醇材料.名称与符号系统和基本规范 |
Plastics - Poly(vinyl alcohol) (PVAL) materials - Designation system and basis for specifications |
BS ISO 15023-2-2003 |
塑料.聚乙烯醇(PVAL)材料.特性的测定 |
(Plastics - Poly(vinyl alcohol) (PVAL) materials - Determination of properties) |
BS ISO 15024-2002 |
纤维增强塑料复合材料.无方向性增强材料的模式I层间断裂韧性(UPGIC)的测定 |
Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, GDOWNiDOWNc, for unidirectionally reinforced materials |
BS ISO 15032-2000 |
修复术.髋关节结构试验 |
Prostheses - Structural testing of hip joints |
BS ISO 15033-2000 |
塑料.用高效液相色谱分析法测定己内酰胺及其周期和线性集聚物 |
Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC |
BS ISO 15034-2000 |
化合物.预浸料坯.树脂流动的测定 |
Composites - Prepregs - Determination of resin flow |
BS ISO 15037-1-1999 |
道路车辆.车辆动力学试验方法.第1部分:客车的一般条件 |
Road vehicles - Vehicle dynamics test methods - General conditions for passenger cars |
BS ISO 15037-2-2003 |
道路车辆.车辆动力学试验方法.重型车辆和公共汽车的一般条件 |
Road vehicles - Vehicle dynamics test methods - General conditions for heavy vehicles and buses |
BS ISO 15038-1999 |
塑料.不饱和聚酯热固材料的有机聚酯交联剂.活性氧含量的测定 |
Plastics - Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials - Determination of active-oxygen content |
BS ISO 15040-2000 |
复合物.预浸料坯.胶凝时间的测定 |
Composites - Prepregs - Determination of gel time |
BS ISO 1505-1993 |
纺织机械.染整设备的有关宽度.额定宽度范围和定义 |
Textile machinery - Widths relating to dyeing and finishing machines - Definitions and range of nominal widths |
BS ISO 15072-2000 |
带有米制细牙螺纹法兰的六角螺栓.小型系列.产品等级A |
Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
BS ISO 15078-1998 |
林业机械.原木装载机.双层驾驶员控制的操作方法和位置 |
Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls |
BS ISO 15086-1-2001 |
液力传动.件和系统中液载噪音特性的测定.说明 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction |
BS ISO 15086-2-2000 |
液压动力.件和系统中液载噪音特性的测定.管道液流中声音速度的测量 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe |
BS ISO 15100-2001 |
塑料.增强纤维.短切原丝.松密度的测定 |
Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density |
BS ISO 15105-1-2002 |
塑料.薄模和薄模纸.用压差法测定气体穿透率 |
Plastics - Film and sheeting - Determination of gas-transmission rate - Differential-pressure method |
BS ISO 15105-2-2003 |
塑料.薄膜和片材.气体传输率的测定.等压法 |
(Plastics - Film and sheeting - Determination of gas-transmission rate - Equal-pressure method) |
BS ISO 15113-2000 |
橡胶.摩擦特性的测定 |
Rubber - Determination of frictional properties |
BS ISO 15117-1-2004 |
煤流动性.料斗抖动 |
|
BS ISO 15142-1-2003 |
外科植入物.金属髓内插钉系统.髓内插钉 |
(Implants for surgery - Metal intramedullary nailing systems - Intramedullary nails) |
BS ISO 15142-2-2003 |
外科植入物.金属髓内插钉系统.锁定件 |
(Implants for surgery - Metal intramedullary nailing systems - Locking components) |
BS ISO 15142-3-2003 |
外科植入物.金属骨髓腔内插钉系统.连接设备和扩孔钻直径测量 |
(Implants for surgery - Metal intramedullary nailing systems - Connection devices and reamer diameter measurements) |