标准号 |
中文名称 |
英文名称 |
prEN ISO 16408-2003 |
牙科学口腔卫生用品口腔清洗 |
Dentistry - Oral hygiene products - Oral rinses (ISO/DIS 16408:2003) |
prEN ISO 16484-1-1999 |
建筑物控制系统第1部分:概述与定义 |
Building control systems - Part 1: Overview and definitions (ISO/DIS 16484-1:1999) |
prEN ISO 16484-2-2003 |
建筑物控制系统第2部分:加热、通风与空调(HVAC)控制系统功能度 |
Building automation and control systems (BACS) - Part 2: Hardware (ISO/FDIS 16484-2:2003) |
prEN ISO 16671-2003 |
眼科植入物眼外科清洗液 |
Ophthalmic implants - Irrigating solutions for ophthalmic surgery (ISO 16671:2003) |
prEN ISO 16744-2003 |
牙科学固定牙齿复原用碱金属材料 |
Dentistry - Base metal materials for fixed dental restorations (ISO/FDIS 16744:2003) |
prEN ISO 16851-2003 |
织物传输带环形传输带净长度的测试方法 |
Textile conveyor belts - Method of test for the determination of the net length of an endless (spliced) conveyor belt (ISO/FDIS 16851:2003) |
prEN ISO 17249-2000 |
抗链锯锯割的安全鞋袜 |
Safety footwear with resistance to chain saw cutting (ISO/DIS 17249:2000) |
prEN ISO 17250-2000 |
耐火焰的安全鞋袜 |
Safety footwear with resistance to fire-fighting hazards (ISO/DIS 17250:2000) |
prEN ISO 17292-2002 |
石油、石油化工及相关工业用金属球阀 |
Metal ball valves for petroleum, petrochemical and allied industries (ISO/DIS 17292:2002) / Note: Endorsement notice |
prEN ISO 1735-2002 |
干酪及融化干酪制品脂肪含量的测定重量分析法(参照法) |
Cheese and processed cheese products - Determination of fat content - Gravimetric method (Reference method) (ISO/DIS 1735:2002) / Note: Endorsement notice |
prEN ISO 17624-2001 |
声学用声屏法控制办公室及工作间噪声的指南 |
Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO/DIS 17624:2001) |
prEN ISO 17641-1-2000 |
金属焊缝的无损检查焊件的热裂开检查第1部分:总则 |
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Part 1: General (ISO/DIS 17641-1:2000) |
prEN ISO 17641-2-2000 |
金属焊缝的无损检查焊件的热裂开检查第2部分:自约束检查 |
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Part 2: Self-restraint tests (ISO/DIS 17641-2:2000) |
prEN ISO 17641-3-2000 |
金属焊缝的无损检查焊件的热裂开检查第3部分:外加荷载检查 |
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Part 3: Externally loaded tests (ISO/DIS 17641-3:2000) |
prEN ISO 17642-1-2000 |
金属焊缝的无损检查焊件的冷裂开检查第1部分:总则 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 1: General |
prEN ISO 17642-2-2000 |
金属焊缝的无损检查焊件的冷裂开检查第2部分:自约束检查 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 2: Self-restraint tests |
prEN ISO 17642-3-2000 |
金属焊缝的无损检查焊件的冷裂开检查第3部分:外加荷载检查 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 3: Externally loaded tests |
prEN ISO 17660-2002 |
钢筋的焊接 |
Welding of reinforcing steel (ISO/DIS 17660:2002) |
prEN ISO 17662-2001 |
焊接包括辅助加工在内的焊接设备的校正、鉴定及确认 |
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO/DIS 17662:2001) |
prEN ISO 17664-2003 |
医疗装置的消毒由制造商提供的可消毒装置回收利用信息 |
Sterilization of medical devices - Information to be provided by the manufacturer for the reprocessing of resterilizable devices (ISO/FDIS 17664:2003) |
prEN ISO 17707-2000 |
鞋鞋底的试验方法抗挠曲性 |
Footwear - Test methods for outsoles - Flex resistance (ISO/DIS 17707:2000) |
prEN ISO 17834-2003 |
热喷涂高温时防腐蚀及防氧化的保护涂料 |
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO/FDIS 17834:2003) |
prEN ISO 17836-2002 |
热喷涂沉积效率的测定 |
Determination of the deposition efficiency for thermal spaying (ISO/DIS 17836:2002) |
prEN ISO 18265-2003 |
金属材料硬度值的转换 |
Metallic materials - Conversion of hardness values (ISO/FDIS 18265:2003) |
prEN ISO 18273-2003 |
焊接消耗材料铝及铝合金电弧焊用丝状电极、焊丝和焊条分类 |
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO/FDIS 18273:2003) |
prEN ISO 18274-2003 |
焊接消耗材料镍及镍合金电弧焊用丝状及带状电极、焊丝和焊条分类 |
Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification (ISO/FDIS 18274:2003) |
prEN ISO 18278-1-2002 |
电阻焊可焊性第1部分:金属材料电阻点焊、缝焊和凸焊的可焊性评价 |
Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO/DIS 18278-1:2002) |
prEN ISO 18278-2-2002 |
电阻焊可焊性第2部分:点焊用钢板的交替法评价 |
Resistance welding - Weldability - Part 2: Alternative procedures for the assessment of steel sheets for spot welding (ISO/DIS 18278-2:2002) |
prEN ISO 18279-2002 |
钎焊钎焊焊缝的缺陷 |
Brazing - Imperfections in brazed joints (ISO/FDIS 18279:2002) |
prEN ISO 18691-2002 |
专用安全鞋袜、防护鞋袜及职业和特殊职业鞋袜鞋带 |
Safety, protective, occupational and specific job-related footwear for professional use - Shoe laces (ISO/DIS 18691:2002) |
prEN ISO 19019-2002 |
远洋船和造船技术规划、实施及报告密封试验 |
Sea-going vessels and marine technology - Guide for planning, carrying out and reporting seal trials (ISO/DIS 19019:2002) |
prEN ISO 19439-2002 |
企业重组企业模式的框架 |
Enterprise integration - Framework for enterprise modelling (ISO/DIS 19439:2002) |
prEN ISO 1968-2003 |
纤维绳索和绳索制品词汇 |
Fibre ropes and cordage - Terms and Definitions (ISO/FDIS 1968:2003) |
prEN ISO 19840-2003 |
油漆和清漆用防护漆对钢结构粗表面进行防腐干膜厚度的测量及验收标准 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness of coatings on rough surfaces (ISO/FDIS 19840:2003) |
prEN ISO 19953-2003 |
鞋袜鞋跟的试验方法抗横向冲击性 |
Footwear - Test methods for heels - Resistance to lateral impact (ISO/FDIS 19953:2003) |
prEN ISO 19956-2002 |
鞋袜鞋跟的试验方法抗疲劳性 |
Footwear - Test methods for heels - Fatigue resistance (ISO/DIS 19956:2002) |
prEN ISO 19957-2002 |
鞋袜鞋跟的试验方法鞋跟钉的附着力 |
Footwear - Test methods for heels - Heel pin holding strength (ISO/DIS 19957:2002) |
prEN ISO 19958-2003 |
鞋袜鞋跟和鞋垫(top piece)的试验方法鞋垫附着力 |
Footwear - Test methods for heels and top pieces - Top piece retention strength (ISO/FDIS 19958:2003) |
prEN ISO 20344-2003 |
专用安全鞋袜、防护鞋袜及职业和特殊职业鞋袜的试验方法 |
Personal protective equipment - Test methods for footwear (ISO/FDIS 20344:2003) / Note: Intended as replacement for EN 344-1 (1992-11). |
prEN ISO 20345-2003 |
专用安全鞋袜规范 |
Personal protective equipment - Safety footwear (ISO/FDIS 20345:2003) / Note: Intended as replacement for EN 345-1 (1992-11), EN 345-2 (1996-07). |
prEN ISO 20346-2003 |
专用防护鞋袜规范 |
Personal protective equipment - Protective footwear (ISO/FDIS 20346:2003) / Note: Intended as replacement for EN 346-1 (1992-11), EN 346-2 (1996-07). |
prEN ISO 20347-2003 |
专用职业鞋袜规范 |
Personal protective equipment - Occupational footwear (ISO/FDIS 20347:2003) |
prEN ISO 20623-2003 |
石油和石油产品液态石油产品的耐板压特性和抗磨特性的测定四球法(欧洲条件) |
Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO/FDIS 20623:2003) |
prEN ISO 20643-2002 |
手持式或手控式机械通过手传递的震动在握紧处震动的测量 |
Hand-transmitted vibration from hand-held or hand-guided machinery - Measurement of vibration at the grip surface (ISO/DIS 20643:2002) |
prEN ISO 20764-2003 |
石油和石油产品测定水含量用高沸点液体试验样品的制备氮清除法 |
Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO/FDIS 20764:2003) |
prEN ISO 20783-1-2003 |
石油及石油产品阻燃液乳化稳定性的测定第1部分:HFAE类流体 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO/FDIS 20783-1:2003) |
prEN ISO 20783-2-2003 |
石油及石油产品阻燃液乳化稳定性的测定第2部分:HFB类流体 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO/FDIS 20783-2:2003) |
prEN ISO 20844-2002 |
石油及石油产品用柴油机喷嘴测定含聚合物油类的剪切稳定性 |
Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002) |
prEN ISO 20846-2002 |
石油及石油产品液态石油产品总硫量的测定紫外线荧光法 |
Petroleum products - Determination of total sulfur content of liquid petroleum products - Ultraviolet fluorescence method (ISO/DIS 20846:2002) / Note: Endorsement notice |
prEN ISO 20847-2002 |
石油产品机动车燃料含硫量的测定能量分散X射线荧光光谱法 |
Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO/DIS 20847:2002) / Note: Endorsement notice |
prEN ISO 20884-2002 |
石油产品机动车燃料含硫量的测定波长分散X射线荧光光谱法 |
Petroleum products - Determination of low sulfur content of automotive fuels - Wavelenght-dispersive X-ray fluorescence spectrometry (ISO/DIS 20884:2002) / Note: Endorsement notice |
prEN ISO 21007-1-2002 |
可移动气瓶 采用射频识别技术的识别和标志 第1部分:参考结构和术语 |
Gas cylinders - Identification and marking using radio frequency identification technology - Part 1: Reference architecture and terminology (ISO/DIS 21007-1:2002) |
prEN ISO 21007-2-2002 |
可移动气瓶 采用射频识别技术的识别和标志 第1部分:数据机构的框架 |
Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency (ISO/DIS 21007-2:2002) |
prEN ISO 21267-1-2003 |
技术制图铁路上的应用第1部分:一般原则 |
Technical drawings - Railway applications - Part 1: General principles (ISO/FDIS 21267-1:2003) |
prEN ISO 21267-2-2003 |
技术制图铁路上的应用第2部分:零件目录 |
Technical drawings - Railway applications - Part 2: Parts lists (ISO/FDIS 21267-2:2003) |
prEN ISO 21267-3-2003 |
技术制图铁路上的应用第3部分:技术文件的修改 |
Technical drawings - Railway applications - Part 3: Handling of modifications of technical documents (ISO/FDIS 21267-3:2003) |
prEN ISO 21572-2003 |
饲料原生改良有机物及衍生制品的检查蛋白质基法 |
Foodstuffs - Methods for the detection of genetically modified organisms and derived products - Protein based methods (ISO/FDIS 21572:2003) |
prEN ISO 21787-2001 |
工业阀门热塑塑料制球阀 |
Industrial valves - Globe valves of thermoplastic materials (ISO/DIS 21787:2001) |
prEN ISO 21868-2002 |
纺织地面覆盖物维护及清洗指南 |
Textile floor coverings - Guidelines for maintenance and cleaning (ISO/DIS 21868:2002) |
prEN ISO 2360-2003 |
非磁性基金属上非导电涂层镀层厚度的测量振幅灵敏的涡流法 |
Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO/FDIS 2360:2003) / Note: Intended as replacement for EN ISO 2360 (1995-01). |
prEN ISO 2580-2-2003 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 2580-2:2003) / Note: Intended as replacement for EN ISO 2580-2 (1999-05). |
prEN ISO 2692-2002 |
技术制图几何公差最大实体原则 |
Technical drawings - Geometrical tolerancing - Maximum material principle (ISO/DIS 2692:2002) |
prEN ISO 2722-1997 |
釉瓷和搪瓷室温下耐柠檬酸的测定 |
Vitreous and porcelain enamels - Determination of resistance to citric acid at room temperature (ISO 2722:1997) |
prEN ISO 2801-1997 |
阻热和隔热服防护服的选择、保存和使用的一般建议 |
Clothing for protection against heat and flame - General recommendations for selection, care and use of protective clothing (ISO/FDIS 2801:1997) |
prEN ISO 2810-2002 |
色漆和清漆天然老化 |
Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO/DIS 2810:12002) |
prEN ISO 2897-2-2003 |
塑料耐冲击聚苯乙烯(PS-I)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/FDIS 2897-2:2003) / Note: Intended as replacement for EN ISO 2897-2 (1999-05). |
prEN ISO 306-2002 |
塑料热塑性材料维卡软化温度的测定 |
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO/DIS 306:2002) |
prEN ISO 3095-2001 |
铁路应用 声学有轨车辆发射的噪声的测量 |
Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO/DIS 3095:2001) |
prEN ISO 3126-2002 |
塑料管材塑料管成分测量与尺寸的测定 |
Plastics piping systems - Plastics components - Determination of dimensions (ISO/FDIS 3126:2002) |
prEN ISO 3170-2002 |
石油液体人工采样 |
Petroleum liquids - Manual sampling (ISO/DIS 3170:2002) |
prEN ISO 3327-2001 |
硬质金属横向断裂强度的测定 |
Hardmetals - Determination of transverse rupture strength (ISO/DIS 3327:2001) |
prEN ISO 3381-2001 |
铁路应用声学有轨车辆内的噪音测量 |
Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO/DIS 3381:2001) |
prEN ISO 3471-1998 |
土方机械翻车保护结构实验室试验和性能要求 |
Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:1994 + Amendment 1:1997) |
prEN ISO 3635-1996 |
服装的尺寸标识定义和人体的测量步骤 |
Size designation of clothes - Definitions and body measurement procedure (includes ISO 3635:1981/DAM1) |
prEN ISO 3745-2003 |
声学声压法测定噪声源的声功率级消声室和半消声室精密法 |
Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms (ISO/FDIS 3745:2003) |
prEN ISO 3758-2002 |
纺织品使用符号的保养标签规则 |
Textiles - Care labelling code using symbols (ISO/DIS 3758:2002) |
prEN ISO 376-2002 |
金属材料单轴试验机校验用校力检验仪的校准 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO/DIS 376:2002) |
prEN ISO 3766-2003 |
建筑工程制图钢筋混凝土的简化画法 |
Construction drawings - Simplified representation of concrete reinforcement (ISO/FDIS 3766:2003) / Note: Intended as replacement for EN ISO 3766 (1999-07). |
prEN ISO 3838-2002 |
原油和液体或固体石油产品密度或相对密度的测定毛细管塞比重瓶和带刻度双毛细管比重瓶法 |
Crude petroleum and liquid or solid petroleum products - Determination of desity or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO/DIS 3838:2002) |
prEN ISO 389-8-2001 |
声学校正听力设备的基准零级第8部分:纯音和头戴式耳机用的基准等效阈声压级 |
Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO/DIS 389-8:2001) |
prEN ISO 407-2001 |
小型医用气瓶针导轭式阀连接 |
Small medical gas cylinders - PIN-index yoke-type valve connections (ISO/DIS 407:2001) |
prEN ISO 4126-1-2003 |
防止过压防护的安全装置 第1部分:安全阀 |
Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO/FDIS 4126-1:2003) |
prEN ISO 4126-4-2003 |
保护额外压力的安全设备第4部分:飞行员操作安全阀 |
Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003) |
prEN ISO 4126-5-2003 |
防止过压防护的安全装置 第5部分:受控安全减压系统 |
Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO/FDIS 4126-5:2003) |
prEN ISO 4126-6-2002 |
保护额外压力的安全设备第6部分:防爆膜安全设备的应用,选择与安装 |
Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO/FDIS 4126-6:2002) |
prEN ISO 4126-7-2003 |
防止过压防护的安全装置 第7部分:通用数据 |
Safety devices for protection against excessive pressure - Part 7: Common data (ISO/FDIS 4126-7:2003) |
prEN ISO 4526-2002 |
金属覆盖层工程用镍电镀层 |
Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO/DIS 4526:2002) |
prEN ISO 463-2003 |
产品几何技术规范(GPS)尺寸测量仪器:测微仪设计与度量衡学的要求 |
Geometrical product specification (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO/DIS 463:2003) |
prEN ISO 4934-2003 |
钢和铸铁硫含量的测定重量分析法 |
Steel and iron - Determination of sulfur content - Gravimetric method (ISO/FDIS 4934:2003) / Note: Intended as replacement for EN 24934 (1989-05). |
prEN ISO 5263-3-2003 |
prEN ISO 5263-3-2003 |
|
prEN ISO 544-2003 |
焊接消耗品焊接填缝金属的交货技术条件产品型号、尺寸、公差和标记 |
Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings (ISO/FDIS 544:2003) |
prEN ISO 5534-2002 |
干酪和融化干酪制品总固含量的测定(参照法) |
Cheese and processed cheese products - Determination of total solids content (Reference method) (ISO/DIS 5534:2002) / Note: Endorsement notice |
prEN ISO 5667-3-2003 |
水质采样第3部分:样品保存和处理方法指南 |
Water quality - Sampling - Part 3: Guidance on the preservation and handling of samples (ISO/FDIS 5667-3:2003) / Note: Intended as replacement for prEN ISO 5667-3 (2002-02). |
prEN ISO 5674-2001 |
农林用拖拉机和机械动力输出(PTO)轴护罩强度与磨损试验 |
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests title (ISO/DIS 5674:2001) |
prEN ISO 580-2002 |
塑料管与管道系统注模制热塑性塑料配件加热反应的视觉评估方法 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO/DIS 580:2002) |
prEN ISO 5817-2003 |
焊接钢、镍、钛与其合金熔化焊接接合不理想性质量级别 |
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO/FDIS 5817:2003) |
prEN ISO 6134-1999 |
饱和水蒸汽橡胶软管和软管组件规范 |
Rubber hoses and hose assemblies for saturated steam - Specification (ISO/DIS 6134:1999) |
prEN ISO 6158-2002 |
金属覆盖层工程用铬电镀层 |
Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO/DIS 6158:2002) |
prEN ISO 6218-2002 |
内河船舶推拖用手操作连接设备安全要求与主要尺寸 |
Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (ISO/DIS 6218:2002) |
prEN ISO 6385-2003 |
工作系统设计的人类工效学原则 |
Ergonomic principles in the design of work systems (ISO/FDIS 6385:2003) / Note: Intended as replacement for ENV 26385 (1990-06). |
prEN ISO 6402-2-2003 |
塑料丙烯腈-苯乙烯-丙烯酸脂(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(氯化聚乙烯)-苯乙 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinatio |
prEN ISO 6710-2002 |
一次性使用静脉血样采集容器 |
Single-use containers for venous blood specimen collection (ISO/DIS 6710:2002) |
prEN ISO 6807-2003 |
旋转式钻探和振动用橡胶软管和软管组件规范 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO/FDIS 6807:2003) |
prEN ISO 6826-1994 |
往复式内燃机防火 |
Reciprocating internal combustion engines - Fire protection (ISO/DIS 6826:1994) |
prEN ISO 7-2-2001 |
用螺纹密封的管螺纹第2部分:用极限量规检验 |
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges (ISO 7-2:2000) |
prEN ISO 7200-1-1999 |
技术产品文件文件标题和标题栏第1部分:一般结构和内容 |
Technical product documentation - Document headers and title blocks - Part 1: General structure and content (ISO/DIS 7200-1:1999) |
prEN ISO 7200-2-1999 |
术产品文件文件标题和标题栏第2部分:机械工程的标题栏 |
Technical product documentation - Document headers and title blocks - Part 2: Title blocks for mechanical engineering (ISO/DIS 7200-2:1999) |
prEN ISO 7200-2002 |
技术制图标题栏 |
Technical product documentation - Data fields in title blocks and document headers (ISO/DIS 7200:2002) |
prEN ISO 7369-2002 |
管道工程金属软管和软管装备词汇 |
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO/DIS 7369:2002) |
prEN ISO 7458-2003 |
玻璃容器耐内压力试验方法 |
Glass containers - Internal pressure resistance - Test methods (ISO/FDIS 7458:2003) |
prEN ISO 7459-2003 |
玻璃容器抗热震性和热震耐久性试验方法 |
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO/FDIS 7459:2003) |
prEN ISO 75-1-2003 |
塑料载荷下挠曲温度的测定第1部分:一般试验方法 |
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO/FDIS 75-1:2003) / Note: Intended as replacement for EN ISO 75-1 (1996-02). |
prEN ISO 75-2-2003 |
塑料载荷下挠曲温度的测定第2部分:塑料与硬橡胶 |
Plastics - Determination of temperature of deflection under load - Part 2: Plastics, ebonite and long-fibre-reinforced composites (ISO/FDIS 75-2:2003) / Note: Intended as replacement for EN ISO 75-2 (1996-02). |
prEN ISO 75-3-2003 |
塑料载荷下挠曲温度的测定第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO/FDIS 75-3:2003) / Note: Intended as replacement for EN ISO 75-3 (1996-02). |
prEN ISO 7500-1-2001 |
料静态单轴向试验机的验证第1部分:拉伸/压缩试验机力测量系统的验证和校正 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system (ISO/DIS 7500-1:2001) |
prEN ISO 7539-7-2002 |
金属与合金的腐蚀应力腐蚀试验第7部分:慢速率应力试验 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO/DIS 7539-7:2002) |
prEN ISO 760-1995 |
水的测定卡尔.费休法(通用方法) |
Determination of water - Karl Fischer method (General method) (ISO 760:1978) |
prEN ISO 7686-2003 |
塑料管材与管件不透明度测定 |
Plastics pipes and fittings - Determination of opacity (ISO/DIS 7686:2003) / Note: Intended as replacement for EN 578 (1993-07). |
prEN ISO 7827-1995 |
水质在含水介质中对有机化合物的“极限”有氧生物降解能力的评估溶解有机碳分析方法 |
Water quality - Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:1994) |
prEN ISO 7864-1995 |
一次性使用无菌皮下注射器 |
Sterile hypodermic needles for single use (ISO 7864:1993) |