标准号 |
中文名称 |
英文名称 |
EN ISO 11670-2003 |
激光和激光设备激光束参数的试验方法束定位稳定性 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003) |
EN ISO 11674-2001 |
船舶与海上技术航向控制系统 |
Ships and marine technology - Heading control systems (ISO 11674:2000) |
EN ISO 11680-1-2000 |
林业机械动力杆式修枝锯的安全要求和试验第1部分:侧挂式杆式修枝锯 |
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000) |
EN ISO 11680-2-2000 |
林业机械动力杆式修枝锯的安全要求和试验第2部分:携背负式杆式修枝锯 |
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000) |
EN ISO 11681-1-2004 |
林业机械.便携式链锯的安全要求和试验.第1部分:林业专用链锯 |
|
EN ISO 11681-2-1998 |
林业机械便携式链锯的安全要求和试验第2部分:修枝锯 |
Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:1998) |
EN ISO 11681-2/prA1-2003 |
林业机械便携式链锯的安全要求和试验第2部分:修枝锯修改A1 |
Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 2: Chain-saws for tree service; Amendment A1 (ISO 11681-2:1998/FDAM 1:2003) / Note: Intended as an amendment to EN ISO 11681-2 (1998-04). |
EN ISO 11683-1997 |
包装触摸危险标志要求 |
Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997) |
EN ISO 11688-2-2000 |
声学低噪声机器和设备设计的推荐实用规程第2部分:低噪声设计的物理工程说明 |
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
EN ISO 11689-1996 |
声学机器和设备发射噪声数据的比较方法 |
Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996) |
EN ISO 11690-1-1996 |
声学低噪声机器工作间设计的推荐实用规程第1部分:噪声控制策略 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
EN ISO 11690-2-1996 |
声学低噪声机器工作间设计的推荐实用规程第2部分:噪声控制措施 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996) |
EN ISO 11690-3-1998 |
声学低噪声机器工作间设计的推荐实用规程第3部分:工作室中的声传播和噪声预测 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997) |
EN ISO 11691-1995 |
声学无气流管道消声器插入损失的测量实验室测量法 |
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
EN ISO 11715-1-1998 |
眼科光学眼镜镜片剖面数据传送用数字数据文件的格式第1部分:二维描绘工具 |
Ophthalmic optics - Format of digital data files for data transfer for profiling of spectacle lenses - Part 1: Two-dimensional tracers (ISO 11715-1:1998) |
EN ISO 1172-1998 |
纺织玻璃纤维增强塑料、预浸料、模塑料和层压塑料纺织玻璃纤维和矿物质填料含量的测定 煅烧法 |
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
EN ISO 11721-1-2001 |
纺织品纤维素纺织品抗菌性的测定弄脏法第1部分:防腐处理的评定 |
Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001) |
EN ISO 11721-2-2003 |
纺织品纺织品中纤维素抗细菌生长力的测定弄脏法第2部分:长期保持干净阻力的识别 |
Textiles - Determination of resistance of cellulose containing textiles to microorganisms; Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish (ISO 11721-2:2003) |
EN ISO 11732-1997 |
水质氨氮的测定流动分析(CFA和FIA)和光谱测定法 |
Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:1997) |
EN ISO 11733-1998 |
水质水中有机化合物的生物降解和去除率的评估方法活性污泥模拟试验 |
Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:1995) |
EN ISO 11733-2004 |
水质.水介质中有机化合物的生物降解和去除率的测定.活性污泥模拟试验 |
|
EN ISO 11734-1998 |
水质消化污泥中有机化合物最终厌氧生物降解能力评估方法测量沼气产生量的方法 |
Water quality - Evaluation of the ultimate anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995) |
EN ISO 11737-2-2000 |
医疗器械灭菌微生物学方法第2部分:确认灭菌过程中进行的无菌试验 |
Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998) |
EN ISO 11806-1997 |
农林机械由内燃机驱动的便携手持式割灌机和割草机安全 |
Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997) |
EN ISO 1181-2004 |
纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳 |
|
EN ISO 11810-2002 |
光学及光学仪器激光及激光设备外科布帘和/或病人防护衣抗激光照射性的试验方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient protective covers (ISO 11810:2002) |
EN ISO 11812-2001 |
小艇密水舱和快速排水舱 |
Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
EN ISO 11816-1-2000 |
乳和乳制品用荧光测定法测定碱性磷酸酶的活性第1部分:乳和乳制饮料 |
Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Part 1: Milk and milk-based drinks (ISO 11816-1:1997) |
EN ISO 11816-2-2003 |
乳和乳制品碱性磷酸酶的活性的测定第2部分:干酪的荧光测定方法 |
Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method for cheese (ISO 11816-2:2003) |
EN ISO 11819-1-2001 |
声学路面对交通噪声影响的测量第1部分:统计旁路法 |
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997) |
EN ISO 1182-2002 |
建筑材料着火试验 反应不燃性试验 |
Reaction to fire tests for building products - Non-combustibility test (ISO 1182:2002) |
EN ISO 11820-1996 |
声学消声器的现场测量 |
Acoustics - Measurements on silencers in situ (ISO 11820:1996) |
EN ISO 11821-1997 |
声学可移动声屏障声衰减的现场测量 |
Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997) |
EN ISO 1183-1-2004 |
塑料.非泡沫塑料的密度测定方法.第1部分:浸入法、液体比重瓶法和滴定法 |
|
EN ISO 1183-2-2004 |
塑料.非泡沫塑料的密度测定方法.第2部分:密度梯度柱法 |
|
EN ISO 1183-3-1999 |
塑料非泡沫塑料的密度测定方法第3部分:气体比重瓶法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999) |
EN ISO 11857-2002 |
铺地织物抗分层性的测定 |
Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999) |
EN ISO 11885-1997 |
水质电感耦合等离子体原子发射光谱法测定33种素 |
Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996) |
EN ISO 11890-1-2001 |
色漆和清漆挥发性有机化合物(VOC)的测定第1部分:各种方法 |
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2000) |
EN ISO 11890-2-2001 |
色漆和清漆挥发性有机化合物(VOC)的测定第2部分:气相色谱法 |
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2000) |
EN ISO 11897-2001 |
包装热塑柔性薄膜袋折边处的撕裂扩展试验 |
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999) |
EN ISO 119-1998 |
塑料酚-醛模塑件游离酚的测定碘量法 |
Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method (ISO 119:1977) |
EN ISO 11904-1-2002 |
声学耳朵接收到的来自封闭噪声源的噪声量的测定第1部分:真耳中使用拾音器的技术(MIRE技术) |
Acoustics - Determination of sound immissions from sound sources placed closed to the ear - Part 1: Technique using a microphone in real ear (MIRE-technique) (ISO 11904-1:2002) |
EN ISO 11904-2-2004 |
声学.从接近耳朵的声源处测定声排放强度.第2部分:利用人体模型技术 |
|
EN ISO 11905-1-1998 |
水质氮的测定第1部分:过硫酸盐氧化消解法 |
Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxosulfate (ISO 11905-1:1997) |
EN ISO 11908-1998 |
色漆和清漆用粘合剂胺基树脂一般试验法 |
Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996) |
EN ISO 11909-1998 |
色漆和清漆用粘合剂聚异氰酸酯树脂一般试验法 |
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:1996) |
EN ISO 11925-2-2002 |
对火反应试验直接受火的建筑制品的可燃性第2部分:单一火源试验 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2002) |
EN ISO 11957-1996 |
声学客舱隔声性能的测定实验室测量和现场测量 |
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
EN ISO 11960-2004 |
石油和天然气工业.油井套管或油管用钢管 |
|
EN ISO 11961-1996 |
石油和天然气工业钻井杆用钢管规范 |
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996) |
EN ISO 11963-1995 |
塑料聚碳酸酯板材类型、尺寸和特性 |
Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:1995) |
EN ISO 11969-1996 |
水质砷的测定原子吸收光谱法(氢化物技术) |
Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
EN ISO 11978-2000 |
眼科光学隐形眼镜和隐形眼镜保护产品制造商提供的信息 |
Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000) |
EN ISO 11979-1-1999 |
眼科植入物眼内透镜第1部分:词汇 |
Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:1999) |
EN ISO 11979-2-1999 |
眼科植入物眼内透镜第2部分:光学特性和测试方法 |
Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999) |
EN ISO 11979-4-2000 |
眼科植入物眼内透镜第4部分:标签和信息 |
Ophthalmic implants - Intraocular lenses - Part 4: Labelling and information (ISO 11979-4:2000) |
EN ISO 11980-1997 |
眼科光学隐形眼镜和隐形眼镜保护产品临床检测指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:1997) |
EN ISO 11981-1999 |
眼科光学隐形眼镜和隐形眼镜保护产品隐形眼镜与隐形眼镜保护产品物理兼容性的测定 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses (ISO 11981:1999) |
EN ISO 11984-1999 |
眼科光学隐形眼镜刚性镜弯曲和断裂强度的测定 |
Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage (ISO 11984:1999) |
EN ISO 11985-1997 |
眼科光学隐形眼镜紫外线辐射的老化试验(试管法) |
Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997) |
EN ISO 11986-2000 |
眼科光学隐形眼镜和隐形眼镜保护产品保护液吸收和释放测定指南 |
Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999) |
EN ISO 11987-1997 |
眼科光学隐形眼镜储存寿命的测定 |
Ophthalmic Optics - Contact lenses - Determination of shell-life (ISO 11987:1997) |
EN ISO 11990-2003 |
光学和光学仪器激光和激光设备导管激光抗性的测定 |
Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003) |
EN ISO 11998-2001 |
色漆和清漆涂层的耐湿式洗涤和清洗性测定 |
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:1998) |
EN ISO 120-1998 |
塑料酚-醛模塑件游离氨和铵化合物的测定比色法 |
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977) |
EN ISO 12005-2003 |
激光和激光设备激光束参数的试验方法偏振 |
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003) |
EN ISO 12017-1996 |
塑料聚甲基丙烯酸甲酯双合板和三合板试验方法 |
Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995) |
EN ISO 12020-2000 |
水质铝的测定原子吸收光谱法 |
Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997) |
EN ISO 12048-2000 |
包装满装的运输包装使用压力试验机的压力试验和堆积试验 |
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994) |
EN ISO 12058-1-2002 |
塑料用落球粘度计测定粘度 第1部分:倾斜管法 |
Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997) |
EN ISO 1207-1994 |
开槽圆柱螺钉产品等级A级 |
Slotted cheese head screws - Product grade A (ISO 1207:1992) |
EN ISO 12085-1997 |
产品几何量技术规范(GPS)表面结构:轮廓法图形参数 |
Geometrical Product Specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996) |
EN ISO 12086-1-1999 |
塑料含氟聚合物分散体模塑和挤塑材料第1部分:命名系统和基本规范 |
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:1995) |
EN ISO 12086-2-1999 |
塑料含氟聚合物分散体模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995) |
EN ISO 1211-2001 |
牛乳脂肪含量的测定重量分析法(参照法) |
Milk - Determination of fat content - Gravimetric method (Reference method) (ISO 1211:1999) |
EN ISO 12114-1997 |
纤维增强塑料热固性模压塑料和预浸料固化特性的测定 |
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997) |
EN ISO 12115-1997 |
纤维增强塑料热固性模压塑料和预浸料流动性、熟化期和适用期的测定 |
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997) |
EN ISO 12138-1996 |
纺织品织物燃烧试验前的家庭洗涤方法 |
Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:1996) |
EN ISO 12156-1-2000 |
柴油使用高频往复装置(HFRR)进行润滑油评定第1部分:试验方法(包括技术勘误) |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:1997, including Technical Corrigendum 1:1998) |
EN ISO 12162-1995 |
压力用热塑性塑料管材和管件分级和命名总体使用(设计)系数 |
Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient (ISO 12162:1995) |
EN ISO 12163-2000 |
牙科基托/模型蜡 |
Dental baseplate/modelling wax (ISO 12163:1999) |
EN ISO 12179-2000 |
产品几何量技术规范(GPS)表面结构:轮廓法接触(触针)式仪器的校准 |
Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments (ISO 12179:2000) |
EN ISO 12185-1996 |
原油和石油产品密度的测定振动的U形管法 |
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
EN ISO 12193-1999 |
动植物油脂铅含量的测定石墨炉原子吸收法 |
Animal and vegetable fats and oils - Determination of lead content - Graphite furnace atomic absorption method (ISO 12193:1994) |
EN ISO 12193-2004 |
动植物油脂.用直接石墨炉原子吸收光谱法测定铅含量 |
|
EN ISO 12205-1996 |
石油产品中间馏分燃料的氧化安定性的测定 |
Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
EN ISO 12209-1-2000 |
气瓶压缩可呼吸空气用气瓶阀的放气连接器第1部分:轭型连接器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000) |
EN ISO 12209-2-2000 |
气瓶压缩可呼吸空气用气瓶阀的放气连接器第2部分:螺纹式连接器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000) |
EN ISO 12209-3-2000 |
气瓶压缩可呼吸空气用气瓶阀的放气连接器第3部分:230 bar 阀适配器 |
Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000) |
EN ISO 12215-1-2000 |
小艇船体结构和尺寸第1部分:材料:热固性树脂、玻璃纤维增强材料、基准层压板 |
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
EN ISO 12215-2-2002 |
小艇船体结构和尺寸第2部分:夹层结构用芯型材料、嵌入材料 |
Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
EN ISO 12215-3-2002 |
小艇船体结构和尺寸第3部分:材料:钢、铝合金、木材、其它材料 |
Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
EN ISO 12215-4-2002 |
小艇船体结构和尺寸第4部分:车间及生产 |
Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
EN ISO 12216-2002 |
小艇窗、船窗、舱口、固定舷窗和门强度和水密封度要求 |
Small craft - Windows, portlights, hatches, dead-lights and doors - Strength and watertightness requirements (ISO 12216:2002) |
EN ISO 12217-1-2002 |
小艇稳定性及浮力的评估和分类第1部分:船体长度大于或等于6m的非帆船 |
Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002) |
EN ISO 12217-2-2002 |
小艇稳定性及浮力的评估和分类第2部分:船体长度大于或等于6m的帆船 |
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002) |
EN ISO 12217-3-2002 |
小艇稳定性及浮力的评估和分类第3部分:船体长度小于6m的小船 |
Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2002) |
EN ISO 12224-1-1998 |
实芯和药芯软钎焊丝规范和试验方法第1部分:分类和性能要求 |
Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997) |
EN ISO 12224-2-1999 |
软钎焊用药芯焊丝规范和试验方法第2部分:钎剂含量的测定 |
Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:1997) |
EN ISO 12224-3-2003 |
实芯和药芯软钎焊丝规范和试验方法第3部分:测定药芯软钎焊丝效果的湿平衡法 |
Solder wire, solid and flux cored - Specifications and test methods - Part 3: Wetting balance test method for flux core solder wire efficacy (ISO 12224-3:2003) |
EN ISO 12228-1999 |
动植物油脂甾醇和总甾醇含量的测定气相色谱法 |
Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999) |
EN ISO 12236-1996 |
土工布及相关产品静态顶破试验(CBR试验) |
Geotextiles and geotextile-related products - Static puncture test (CBR-Test) (ISO 12236:1996) |
EN ISO 12241-1998 |
建筑设备和工业装置绝热计算规则 |
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998) |
EN ISO 1234-1997 |
开口销 |
Split pins (ISO 1234:1997) |
EN ISO 12543-1-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第1部分:定义和零部件的描述 |
Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998) |
EN ISO 12543-2-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第2部分:夹层安全玻璃 |
Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998) |
EN ISO 12543-3-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第3部分:夹层玻璃 |
Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998) |
EN ISO 12543-4-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第4部分:耐久性检验方法 |
Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998) |
EN ISO 12543-5-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第5部分:尺寸和板边精加工 |
Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998) |
EN ISO 12543-6-1998 |
建筑玻璃夹层玻璃和夹层安全玻璃第6部分:外观 |
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998) |
EN ISO 12567-1-2000 |
门、窗热性能热箱法测定传热系数第1部分:整樘门和窗 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1: Complete windows and doors (ISO 12567-1:2000) |
EN ISO 12569-2000 |
建筑物热性能建筑物的换气率测定示踪气体稀释法 |
Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000) |
EN ISO 12570-2000 |
建筑材料和制品的湿热性能高温干燥法测定含湿率 |
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000) |
EN ISO 12571-2000 |
建筑材料和制品湿热性能吸湿性质的测定 |
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000) |
EN ISO 12572-2001 |
建筑材料及制品的温湿性能透水蒸汽性的测定 |
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001) |
EN ISO 1264-1997 |
塑料氯乙烯均聚物和共聚物树脂水萃取物的pH值测定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980) |
EN ISO 1265-1997 |
塑料聚氯乙烯树脂杂质和外来杂质数的测定 |
Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles (ISO 1265:1979) |
EN ISO 12676-2003 |
耐火制品耐一氧化碳性的测定 |
Refractory products - Determination of resistance to carbon monoxide (ISO 12676:2000) |
EN ISO 12677-2003 |
用XRF法作耐火制品的化学分析熔化铸珠法 |
Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003) |