标准号 |
中文名称 |
英文名称 |
BS ISO 6549-2000 |
道路车辆.H和R点测定的程序 |
Road vehicles - Procedure for H- and R-point determination |
BS ISO 6550-3-2002 |
道路车辆.带锥座的封闭型电热塞及其气缸安装孔尺寸.第3部分:M10DRKONG |
Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs |
BS ISO 6550-4-2005 |
道路车辆.带锥座封闭型电热塞及其汽缸盖安装孔尺寸.M8 x 1电热塞 |
|
BS ISO 6561-1-2005 |
水果、蔬菜及其制品.镉含量测定.石墨炉原子吸收光谱测定法 |
|
BS ISO 6561-2-2005 |
水果、蔬菜及其制品.镉含量测定.火焰原子吸收光谱测定法 |
|
BS ISO 6570-2002 |
天然气.潜在烃液含量的测定.测重法 |
Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods |
BS ISO 6576-2004 |
月桂(Laurus nobilis Linnaeus)整叶和碎叶 |
|
BS ISO 6576-2004 |
月桂.(Laurus nobilis Linnaeus)整叶和碎叶 |
|
BS ISO 6588-1-2005 |
纸、纸板和纸浆.水提取物pH值的测定.冷萃取 |
|
BS ISO 6605-2003 |
液压传动.软管及软管组件.试验方法 |
(Hydraulic fluid power - Hoses and hose assemblies - Test methods) |
BS ISO 6611-2004 |
乳和乳制品.酵母和(或)霉菌菌落形成单位的计数.25℃时的菌落计数技术 |
|
BS ISO 6621-2-2004 |
内燃机.活塞环.检验测量规则 |
|
BS ISO 6621-4-2003 |
内燃机.活塞环.一般规范 |
(Internal combustion engines - Piston rings - General specifications) |
BS ISO 6623-2004 |
内燃机.活塞环.铸铁制刮环 |
|
BS ISO 6644-2002 |
流动谷物和精加工谷物产品.机械方法自动取样 |
Flowing cereals and milled cereal products - Automatic sampling by mechanical means |
BS ISO 6646-2000 |
稻米.稻谷和有壳稻谷潜在碾磨产量的测定 |
Rice - Determination of the potential milling yield from paddy and husked rice |
BS ISO 666-1997 |
机床.轮毂式法兰平面磨轮的安装 |
Machine tools - Mounting of plain grinding wheels by means of hub flanges |
BS ISO 6670-2002 |
速溶咖啡.带内衬的大容量箱的取样方法 |
Instant coffee - Sampling method for bulk units with liners |
BS ISO 6673-2003 |
生咖啡豆.在105℃时质量损失的测定 |
(Green coffee - Determination of loss in mass at 105 鳦) |
BS ISO 668-1996 |
货运集装箱系列1.分类、外形尺寸和额定容量 |
Series 1 freight containers - Classification, dimensions and ratings |
BS ISO 6686-1995 |
作物保护设备.防滴装置.减小喷嘴液流量的测定 |
Equipment for crop protection - Anti-drip devices - Determination of performance |
BS ISO 6690-1997 |
挤奶装置的机械试验 |
Milking machine installations - Mechanical tests |
BS ISO 6710-1996 |
静脉取血样用一次性容器 |
Single-use containers for venous blood specimen collection |
BS ISO 6721-10-2001 |
塑料.动力机械性能的测定.使用平行板式振荡流变仪测定复合剪切粘度 |
(Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer) |
BS ISO 6741-1-2002 |
纺织品.纤维和纱.寄销品商业质量的测定.质量的测定和计算 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Mass determination and calculations |
BS ISO 6741-2-2002 |
纺织品.纤维和纱.寄销品商业质量的测定.获取实验室样品的方法 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Methods for obtaining laboratory samples |
BS ISO 6741-3-2002 |
纺织品.纤维和纱.寄销品商业质量的测定.样品净化规程 |
Textiles - Fibres and yarns - Determination of commercial mass of consignments - Specimen cleaning procedures |
BS ISO 6743-1-2002 |
润滑剂、工业用润滑油和有关产品(L类).分类.A 族(总损耗系统) |
Lubricants, industrial oils and related products (class L) - Classification - Family A (Total loss systems) |
BS ISO 6743-3-2004 |
润滑剂、工业润滑油和有关产品(L类).分类.D组(压缩机) |
|
BS ISO 6743-4-1999 |
润滑剂、工业用润滑油和有关产品(L类).分类.第4部分:H族(液压系统) |
Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems) |
BS ISO 6743-9-2004 |
润滑剂、工业润滑油和有关产品(L类).分类.X族(润滑脂) |
|
BS ISO 6743-99-2002 |
润滑剂、工业用润滑油和有关产品(L类).分类.总则 |
Lubricants, industrial oils and related products (class L) - Classification - General |
BS ISO 6746-1-2003 |
土方机械.尺寸和代码的定义.主机 |
(Earth-moving machinery - Definitions of dimensions and codes - Base machine) |
BS ISO 6746-2-2003 |
土方机械.尺寸和代码的定义.设备和附件 |
(Earth-moving machinery - Definitions of dimensions and codes - Equipment and attachments) |
BS ISO 6751-1998 |
制模工具.圆柱头推杆 |
Tools for moulding - Ejector pins with cylindrical head |
BS ISO 6753-2-1998 |
模压工具.机加工金属板.第2部分:模具的机加工金属板 |
Tools for pressing and moulding - Machined plates - Machined plates for moulds |
BS ISO 6768-1998 |
环境空气.二氧化氮含量浓度的测定.改进的格里斯-萨尔茨曼(Griess-Saltzman) 法 |
Ambient air - Determination of mass concentration of nitrogen dioxide - Modified Griess-Saltzman method |
BS ISO 6780-1995 |
货物联运用普通平托盘.一般用途的货物联运托盘主要尺寸及公差 |
(General-purpose flat pallets for through transit of goods - Principal dimensions and tolerances) |
BS ISO 6787-2001 |
螺钉和螺母用装配工具.可调扳手 |
(Assembly tools for screws and nuts - Adjustable wrenches) |
BS ISO 6798-1996 |
往复式内燃机.空气噪声的测量.工程法和测量法 |
Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method |
BS ISO 68-1-1999 |
ISO普通螺纹.基本外形.第1部分:米制螺纹 |
ISO general purpose screw threads - Basic profile - Metric screw threads |
BS ISO 68-2-1999 |
ISO普通螺纹.基本外形.第1部分:英制螺纹 |
ISO general purpose screw threads - Basic profile - Inch screw threads |
BS ISO 6805-1995 |
井下采矿用橡胶软管和软管组件.采煤用的钢丝加筋液压型.规范 |
Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
BS ISO 6811-1998 |
球面滑动轴承.词汇 |
Spherical plain bearings - Vocabulary |
BS ISO 6813-1998 |
道路车辆.碰撞分类.术语 |
Road vehicles - Collision classification - Terminology |
BS ISO 6846-1995 |
摄影技术.黑白连续色调相纸.印相用ISO感光度和宽容度的测定 |
Photography - Black and white continuous tone papers - Determination of ISO speed and ISO range for printing |
BS ISO 6849-1997 |
摄影术.加工照片废弃物.硼的测定 |
Photography - Processing wastes - Determination of boron |
BS ISO 6851-2002 |
摄影.冲洗废液.氨态氮总含量的测定(微扩散基氏定氮法) |
Photography - Processing waste - Determination of total amino nitrogen (microdiffusion Kjeldahl method) |
BS ISO 6853-2002 |
摄影.冲洗废液.氨态氮含量的测定(微扩散法) |
Photography - Processing waste - Determination of ammoniacal nitrogen (microdiffusion method) |
BS ISO 6861-1997 |
信息和文献工作.目录信息交换用Glagolitic字母代码字符集 |
Information and documentation - Glagolitic alphabet coded character set for bibliographic information interchange |
BS ISO 6870-2003 |
动物饲料.玉米赤霉烯酮含量的定性测定 |
(Animal feeding stuffs - Qualitative determination of zearalenone) |
BS ISO 6879-1996 |
空气质量.空气质量测量方法的性能特征和有关概念 |
Air quality - Performance characteristics and related concepts for air quality measuring methods |
BS ISO 69-1998 |
电影摄影.16mm电影磁片.剪切和穿孔尺寸 |
Cinematography - 16 mm motion-picture magnetic film - Cutting and perforating dimensions |
BS ISO 690-2-1998 |
信息和文献.参考文献.第2部分:电子文献或其分册 |
Information and documentation - Bibliographic references - Electronic documents or parts thereof |
BS ISO 6916-1-1996 |
柔性多孔聚合材料.泡沫和海绵多孔橡胶制品.第1部分:薄板 |
Flexible cellular polymeric materials - Sponge and expanded cellular rubber products - Specification - Sheeting |
BS ISO 6926-2000 |
声学.声功率级测定用基准声源的性能和校正要求 |
Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels |
BS ISO 6939-2002 |
纺织品.筒子纱.纱线抗断裂强度试验法.绞纱法 |
Textiles - Yarns from packages - Method of test for breaking strength of yarn by the skein method |
BS ISO 694-2000 |
船舶技术.船上磁罗盘的定位 |
Ships and marine technology. Positioning of magnetic compasses in ships |
BS ISO 6953-1-2001 |
气压传动.压缩气体压力调节器和过滤器调节器.供应商说明书中包括的主要特性和产品标记要求 |
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Main characteristics to be included in literature from suppliers and product-marking requirements |
BS ISO 6953-2-2001 |
气压传动.压缩气体压力调节器和过滤器调节器.测定供应商说明书中包括的主要特性的试验方法 |
Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliers |
BS ISO 6954-2001 |
机械振动.客轮和商船可允许振动的测量、报告和评价导则 |
Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
BS ISO 6969-2004 |
道路车辆.声音信号设备.车辆安装后的试验 |
|
BS ISO 6971-2002 |
焊接结构拉曳用弯板链、附件和链轮 |
Cranked-link drag chains of welded construction, attachments and sprockets |
BS ISO 6972-2002 |
焊接结构工程用弯板链、附件和链轮 |
Cranked-link mill chains of welded construction, attachments and sprockets |
BS ISO 6974-1-2000 |
天然气.用气相色谱法测定具有规定不定度的成分.第1部分:简明分析导则 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Guidelines for tailored analysis |
BS ISO 6974-2-2001 |
天然气.用气相色谱法测定规定的不确定性.数据处理用定性和统计巡饬肯低厂 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data |
BS ISO 6974-3-2000 |
天然气.用气相色谱法测定具有规定不定度的成分.用两个填充柱对氢,氦,氧,氮,二氧化碳和达到C8的碳氢化合物测定 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
BS ISO 6974-4-2000 |
天然气.用气相色谱法测定具有规定不定度的成分.第4部分:用两柱测定实验室和联机测量系统用氮、二氧化碳和C到C和C的烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
BS ISO 6974-5-2000 |
天然气.用气相色谱法测定具有规定不定度的成分.用三柱测定实验室和联机测量系统用氮、二氧化碳和C到C和C的烃类 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns |
BS ISO 6974-6-2002 |
天然气.用气相色谱法测定具有规定不定度的成分.用三柱测定氢、氦、氧、氮、二氧化碳和CDOWN1 至 CDOWN8的碳氢化合物 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and CDOWN1 to CDOWN8 hydrocarbons using three capillary columns |
BS ISO 6980-1997 |
校准剂量计和剂量强度计及测定充作为β辐射能量函数的灵敏度用的β标准放射源 |
Specification for reference beta radiations for calibrating dosimeters and dose-rate meters and for determining their response as a function of beta-radiation energy |
BS ISO 6981-1996 |
液压传动.液压缸.活塞杆端孔.装配尺寸 |
Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions |
BS ISO 6982-1996 |
液压传动.液压缸.活塞杆端球面环孔.装配尺寸 |
Hydraulic fluid power - Cylinders - Rod end spherical eyes - Mounting dimensions |
BS ISO 6989-2002 |
纺织纤维.短纤维长度和长度分布的测定(用单纤维的测定) |
Textiles fibres - Determination of length and length distribution of staple fibres (by measurement of single fibres) |
BS ISO 70-1995 |
电影技术.在35mm电影胶片上的35mm负片光学声带.位置和最大宽度尺寸 |
Cinematography - Monophonic 35 mm negative photographic sound record on 35 mm motion-picture film - Position and maximum width dimensions |
BS ISO 7000-2004 |
设备用图形符号.索引和一览表 |
|
BS ISO 7004-2002 |
摄影.工业用射线照相胶片.置于X-射线和γ-射线下的胶片ISO感光 速度和ISO平均速度梯度G2和G4的测定 |
Photography - Industrial radiographic films - Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation |
BS ISO 701-1999 |
国际齿轮符号.几何数据的符号 |
International gear notation - Symbols for geometrical data |
BS ISO 7026-1998 |
柴油发动机.S规格B类针式喷嘴的20、21、21.1和27型螺旋拧入式喷嘴架 |
Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size `S1` type `B` |
BS ISO 704-2001 |
术语工作.原则和方法 |
Terminology work - Principles and methods |
BS ISO 7041-2002 |
2型长效扭矩式六角螺母(使用非金属垫圈).性能类别9和12 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12 |
BS ISO 706-2004 |
橡胶胶乳.凝固物(筛余物)含量的测定 |
|
BS ISO 7063-2004 |
滚动轴承.滚针轴承滚道滚针.边界尺寸和公差 |
|
BS ISO 709-2001 |
香精油.酯化值的测定 |
Essential oils - Determination of ester value |
BS ISO 7112-1999 |
林业机械.便携式手持灌木铲除机和杂草修剪机.词汇 |
Machinery for forestry - Portable hand-held brush-cutters and grass-trimmers - Vocabulary |
BS ISO 7113-1999 |
便携式手持林业机械.灌木铲除机用割锯附件.单片金属刃 |
Portable hand-held forestry machines - Cutting attachments for brush cutters - Single piece metal blades |
BS ISO 7148-1-2000 |
滑动轴承.轴承材料摩擦特性试验.轴承金属试验 |
Plain bearings - Testing of tribological behaviour of bearing materials - Testing of bearing metals |
BS ISO 7148-2-2000 |
滑动轴承.轴承材料摩擦特性试验.多聚物轴承材料试验 |
Plain bearings - Testing of tribological behaviour of bearing materials - Testing of polymer-based bearing materials |
BS ISO 7176-1-1999 |
轮椅.静态稳定性的测定 |
Wheelchairs - Determination of static stability |
BS ISO 7176-14-1997 |
轮椅.电动轮椅的动力和控制系统.要求和试验方法 |
Wheelchairs - Power and control systems for electric wheelchairs - Requirements and test methods |
BS ISO 7176-15-1997 |
轮椅.第15部分:信息说明、文献工作和作标记 |
Wheelchairs - Requirements for information disclosure, documentation and labelling |
BS ISO 7176-16-1997 |
轮椅.椅装套布的耐燃性.要求和试验方法 |
Wheelchairs - Resistance to ignition of upholstered parts - Requirements and test methods |
BS ISO 7176-2-2001 |
轮椅.电动轮椅动态稳定性的测定 |
Wheelchairs - Determination of dynamic stability of electric wheelchairs |
BS ISO 7176-21-2003 |
轮椅.电动轮椅和小型摩托车电磁兼容性的要求和试验方法 |
(Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters) |
BS ISO 7176-22-2000 |
轮椅.安装方法 |
Wheelchairs - Set-up procedures |
BS ISO 7176-24-2004 |
轮椅.使用者操作的爬梯设备的要求和试验方法 |
|
BS ISO 7176-3-2003 |
轮椅.制动器效能的测定 |
(Wheelchairs - Determination of effectiveness of brakes) |
BS ISO 7176-4-1998 |
轮椅.电动轮椅能耗和理论距离范围测定用小型摩托车 |
Wheelchairs - Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
BS ISO 7176-6-2002 |
轮椅.电动轮椅最大速度、加速度及减速度的测定 |
Wheelchairs - Determination of maximum speed, acceleration and deceleration of electric wheelchairs |
BS ISO 7176-8-1998 |
轮椅.静态强度、冲击强度和疲劳强度的要求和试验方法 |
Wheelchairs - Requirements and test methods for static, impact and fatigue strengths |
BS ISO 7176-9-2002 |
轮椅.电动轮椅气候试验 |
Wheelchairs - Climatic tests for electric wheelchairs |
BS ISO 7180-1997 |
气动流体动力.气缸.缸筒和气口螺纹规格 |
Pneumatic fluid power - Cylinders - Bore and port thread sizes |
BS ISO 7181-1997 |
液压传动.液压缸.缸筒和活塞杆截面比 |
Hydraulic fluid power - Cylinders - Bore and rod area ratios |
BS ISO 7187-1996 |
摄影技术.直接彩色照片材料.ISO感光度的测定 |
Photography - Materials for direct-positive colour-print cameras - Determination of ISO speed |
BS ISO 7197-1998 |
神经外科植入物.无菌的,一次性使用的脑积水分流管和组件 |
Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components |
BS ISO 7198-1998 |
心血管植入物.血管修复术 |
Cardiovascular implants - Tubular vascular prostheses |
BS ISO 7200-2001 |
技术制图.标题栏 |
Technical drawing - Title blocks |
BS ISO 7206-4-2002 |
外科植入物.部分和全部假体关节.第4部分:干股骨神经组件和扭转敷物耐久性能的测定 |
Implants for surgery - Partial and total hip joint prostheses - Determination of endurance properties of stemmed femoral components |
BS ISO 7211-3-2002 |
纺织品.机织物.结构.分析方法.织物纱线卷曲性的测定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of crimp of yarn in fabric |
BS ISO 7211-4-2002 |
纺织品.机织物.结构.分析方法.从织物中取出的纱的捻度测定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of twist in yarn removed from fabric |
BS ISO 7211-5-2002 |
纺织品.机织物.结构.分析方法.从织物中取出的纱的线密度测定 |
Textiles - Woven fabrics - Construction - Methods of analysis - Determination of linear density of yarn removed from fabric |
BS ISO 7214-1998 |
泡沫塑料.聚乙烯.试验方法 |
Cellular plastics. Polyethylene. Methods of test |
BS ISO 7215-1996 |
铁矿石.相对还原性的测定 |
Iron ores - Determination of relative reducibility |
BS ISO 7229-1997 |
橡胶或塑料涂覆织物.透气性测量 |
Rubber- or plastics-coated fabrics - Measurements of gas permeability |
BS ISO 7238-2004 |
奶油.乳清pH值的测定.电位滴定法 |
|
BS ISO 7240-15-2004 |
火灾探测和警报系统.多感火灾探测器 |
|
BS ISO 7241-2-2000 |
液压传动.速动连接件.试验方法 |
Hydraulic fluid power - Quick-action couplings - Test methods |
BS ISO 727-1-2002 |
压力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.米制系列 |
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Metric series |
BS ISO 727-2-2002 |
压力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.英制系列 |
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Inch-based series |
BS ISO 727-2-2005 |
压力管件用由未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)或丙烯腈/丁二烯/苯乙烯(ABS)制的带普通管套的管配件.英制系列 |
|