标准号 |
中文名称 |
英文名称 |
| ISO 11678-1996 |
农业排灌机械.铝制灌溉管 |
(Agricultural irrigation equipment - Aluminium irrigation tubes) |
| ISO 11680-1-2000 |
林业机械.动力杆式修枝锯的安全要求和试验.第1部分:侧挂式杆式修枝锯 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine) |
| ISO 11680-2-2000 |
林业机械.动力杆式修枝锯的安全要求和试验.第2部分:携背负式杆式修枝锯 |
(Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source) |
| ISO 11681-1-1996 |
林业机械.便协式链锯的安全要求和试验.第1部分:普通森林管理用链锯 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 1: Chain-saws for normal forest work) |
| ISO 11681-1-2004 |
林业机械.便携式链锯的安全要求和试验.第1部分:林业专用链锯 |
|
| ISO 11681-2 AMD 1-2003 |
林业机械.便携式链锯.安全要求和试验.第2部分:修枝锯.修改件1 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service; Amendment 1) |
| ISO 11681-2 AMD 1-2003 |
林业机械.便携式链锯.安全要求和试验.第2部分:修枝锯.修改件1 |
|
| ISO 11681-2-1998 |
林业机械.便携式链锯.安全要求和试验.第2部分:树木砍伐用链锯 |
(Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service) |
| ISO 11683-1997 |
包装.触摸危险标志的要求 |
(Packaging - Tactile warnings of danger - Requirements) |
| ISO 11684-1995 |
农业和林业,电力剪草和园艺机具用拖拉机及其它机械的安全标志和危险图示一般原理 |
(Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles) |
| ISO 11687-1-1995 |
滑动轴承.轴承座滑动轴承.第1部分:支撑式轴承 |
(Plain bearings - Pedestal plain bearings - Part 1: Pillow blocks) |
| ISO 11687-2-1995 |
滑动轴承.轴承座滑动轴承.第2部分:边法兰轴承 |
(Plain bearings - Pedestal plain bearings - Part 2: Side flange bearings) |
| ISO 11687-3-1995 |
滑动轴承.轴承座滑动轴承.第3部分:中心法兰轴承 |
(Plain bearings - Pedestal plain bearings - Part 3: Centre flange bearings) |
| ISO 11689-1996 |
声学.机械设备释放燥声数据的比较方法 |
(Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment) |
| ISO 1169-1975 |
锌合金.铝含量的测定容量法 |
(Zinc alloys; Determination of aluminium content; Volumetric method) |
| ISO 11690-1-1996 |
声学.低噪声工作室容纳机械装置的设计用推荐实用规程.第1部分:噪声控制战略 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies) |
| ISO 11690-2-1996 |
声学.低噪声工作室容纳机械装置的设计用推荐实用规程.第2部分:噪声控制测量 |
(Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures) |
| ISO 11691-1995 |
声学.无流体管道式消声器的介入损耗测量.实验室调查法 |
(Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method) |
| ISO 11692-1994 |
从工作高温沉淀硬化用铁素珠层工程钢 |
(Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures) |
| ISO 11697-1995 |
结构设计的基础.散装物料的荷载 |
(Basis for design of structures - Loads due to bulk materials) |
| ISO 11698-1-2000 |
缩微照相.用方孔咯扫描仪作出图像质量的测量方法.第1部分:试验图像的特性 |
(Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 1: Characteristics of the test images) |
| ISO 11698-2-2000 |
缩微照相.用方孔咯扫描仪作出图像质量的测量方法.第2部分:质量标准和控制 |
(Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 2: Quality criteria and control) |
| ISO 11699-1-1998 |
无损检验.工业射线摄影胶片.第1部分:工业辐射摄影术用胶片系统的特性 |
(Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography) |
| ISO 11699-2-1998 |
无损检验.工业射线摄影胶片.第2部分:利用参考值控制胶片加工 |
(Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values) |
| ISO 1170-1977 |
煤和焦炭.不同基的分析计算 |
(Coal and coke; Calculation of analyses to different bases) |
| ISO 1171 Technical Corrigendum 1-1998 |
固体燃料检验.灰分含量测定.技术勘误1 |
(Solid mineral fuels - Determination of ash content; Technical Corrigendum 1) |
| ISO 1171-1997 |
固体矿物燃料.灰分含量的测定 |
(Solid mineral fuels - Determination of ash content) |
| ISO 11713-2000 |
用于铝生产的碳质材料.阴极块和阳极块.室温下电阻的测定 |
(Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature) |
| ISO 1172-1996 |
纺织玻璃纤维增强塑料、预浸料坯、压制混合物及叠层板材.纺织玻璃纤维和矿物填充料含量的测定.煅烧法 |
(Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods) |
| ISO 11721-1-2001 |
纺织品.含纤维素纺织品抗微生物的测定.土埋试验.第1部分:抗腐烂程度的评价 |
(Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms; Soil burial test - Part 1: Assessment of rot-retardant finishing) |
| ISO 11721-2-2003 |
纺织品.纤维素纺织品抗菌性的测定.土埋试验.第2部分:防腐处理长期有效性的鉴定 |
(Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish) |
| ISO 11721-2-2003 |
纺织品.纤维素纺织品抗菌性的测定.土埋试验.第2部分:防腐处理长期有效性的鉴定 |
|
| ISO 11722-1999 |
固体矿物燃料.硬煤.通过氮中干燥对一般分析试验样品潮湿度的测定 |
(Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen) |
| ISO 11723-2004 |
固体矿物燃料.砷和硒的测定.艾氏卡混合物和氢化法 |
|
| ISO 11726-2004 |
固体矿物燃料.替代分析法的验证指南 |
|
| ISO 11726-2004 |
固体矿物燃料.替代分析法的验证指南 |
|
| ISO 11727-1999 |
气流动力.控制阀和其它件的控制机械装置和气门的识别 |
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components) |
| ISO 1173-2001 |
螺钉和螺母用装配工具.手动和机动旋具类的驱动端和连接部件.尺寸和扭矩试验 |
(Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing) |
| ISO 11731-1998 |
水质.Legionella的检测和计数 |
(Water quality - Detection and enumeration of Legionella) |
| ISO 11731-2-2004 |
水质.军团藻属的检测和计数.第2部分:对含低量细菌的水进行直接膜过滤的方法 |
|
| ISO 11732-1997 |
水质.用水流分析和光谱检测法测定氨氮 |
(Water quality - Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection) |
| ISO 11733-1995 |
水的质量.在水介质中有机化合物的生物分解和消失的评定.净化沉积物的模拟试验 |
(Water quality - Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test) |
| ISO 11733-2004 |
水质.水介质中有机化合物的生物降解和去除率的测定.活性污泥模拟试验 |
|
| ISO 11733-2004 |
水质.水介质中有机化合物的生物降解和去除率的测定.活性污泥模拟试验 |
|
| ISO 11734-1995 |
水质.消化污泥中有机化合物的`最终`厌氧生物降解能力评定.生物气体制品的测量方法 |
(Water quality - Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production) |
| ISO 11737-1-1995 |
医疗器械的消毒.微生物法.产品的微生物群数的判断 |
(Sterilization of medical devices - Microbiological methods - Part 1: Estimation of population of microorganisms on products) |
| ISO 11737-2-1998 |
医疗器械的消毒.微生物法.第2部分:灭菌证实过程的无菌检验 |
(Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process) |
| ISO 11737-3-2004 |
医疗器械灭菌.微生物学方法.第3部分:生物负荷数据的评估和解释指南 |
|
| ISO 11738-2000 |
农用灌溉设备.控制装置 |
(Agricultural irrigation equipment - Control heads) |
| ISO 1174-1-1996 |
螺钉和螺母用装配工具.驱动方头.第1部分:手动套筒工具的驱动方头 |
(Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools) |
| ISO 1174-2-1996 |
螺钉和螺母用装配工具.驱动方头.第2部分:机动套筒工具的驱动方头 |
(Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools) |
| ISO 11748-1-2001 |
道路车辆.电气和电子系统的技术文件.第1部分:交换文献的内容 |
(Road vehicles - Technical documentation of electrical and electronic systems - Part 1: Content of exchanged documents) |
| ISO 11748-2-2001 |
道路车辆.电气和电子系统的技术文件.第2部分:文献协议 |
(Road vehicles - Technical documentation of electrical and electronic systems - Part 2: Documentation agreement) |
| ISO 11748-3-2002 |
道路车辆.电气和电子系统的技术文件.第3部分:应用实例 |
(Road vehicles - Technical documentation of electrical and electronic systems - Part 3: Application example) |
| ISO 11749 Technical Corrigendum 1-2003 |
皮带传送.自动化工业用三角皮带.疲劳试验.技术勘误1 |
(Belt drive - V-ribbed belts for the automotive industry - Fatigue test; Technical Corrigendum 1) |
| ISO 11749 Technical Corrigendum 1-2003 |
皮带传送.自动化工业用三角皮带.疲劳试验.技术勘误1 |
|
| ISO 11749-1995 |
皮带驱动.用于汽车工业的V-罗纹皮带.疲劳试验 |
(Belt drive - V-ribbed belts for the automotive industry - Fatigue test) |
| ISO 11752-2000 |
柔性泡沫聚合材料.模塑和挤塑多孔或多孔橡胶制品.已完工部件的压缩试验 |
(Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts) |
| ISO 11754-2003 |
航空数据和信息发送系统.遥测通道编码 |
(Space data and information transfer systems - Telemetry channel coding) |
| ISO 11754-2003 |
航空数据和信息发送系统.遥测通道编码 |
|
| ISO 11755-1996 |
永久性的和可液化气体用捆绑式储气瓶(乙炔除外).充气时间的检测 |
(Cylinders in bundles for permanent and liquefiable gases (excluding acetylene) - Inspection at time of filling) |
| ISO 11758 Technical Corrigendum 1-1998 |
橡胶与塑料软管.在氙弧灯下颜色与外观的稳定性试验.技术勘误1 |
(Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance; Technical Corrigendum 1) |
| ISO 11758-1995 |
橡胶和塑料软管.暴露在氙弧灯下的试验.颜色和外观变化的测定 |
(Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance) |
| ISO 11759-1999 |
液化石油气用橡胶软管和软管组件(LPGs).规范 |
(Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - Specification) |
| ISO 1176-1990 |
道路车辆.重量.词汇和代码 |
(Road vehicles; masses; vocabulary and codes) |
| ISO 1177-1985 |
信息处理.定向传输的起止字符和同步字符的字符结构 |
(Information processing - Character structure for start/stop and synchronous character oriented transmission) |
| ISO 1178-1976 |
镁合金.可溶性锆的测定.茜素磺酸盐光度法 |
(Magnesium alloys; Determination of soluble zirconium; Alizarin sulphonate photometric method) |
| ISO 11782-1-1998 |
金属及合金的腐蚀.腐蚀疲劳试验.第1部分:失效试验周期 |
(Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing) |
| ISO 11782-2-1998 |
金属及合金的腐蚀.腐蚀疲劳试验.第2部分:使用裂缝前的裂纹扩展试验 |
(Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens) |
| ISO 11783-2 Technical Corrigendum 1-2003 |
农林业用拖拉机及机械设备.系列控制和通信数据网.第2部分:物理层.技术勘误1 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer; Technical Corrigendum 1) |
| ISO 11783-2 Technical Corrigendum 1-2003 |
农林业用拖拉机及机械设备.系列控制和通信数据网.第2部分:物理层.技术勘误1 |
|
| ISO 11783-2-2002 |
农业和林业用拖拉机及机械设备.系列控制和通信数据网.第2部分:物理层 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer) |
| ISO 11783-3-1998 |
农业和林业用拖拉机及机械.系列控制和通信数据网.第3部分:数据链路层 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 3: Data link layer) |
| ISO 11783-4-2001 |
农业和林业用拖拉机及机械.系列控制和通信数据网.第4部分:网络层 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 4: Network layer) |
| ISO 11783-5 Technical Corrigendum 1-2002 |
农林业用拖拉机及机械设备.系列控制和通信数据网.第5部分:网络管理.技术勘误1 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management; Technical Corrigendum 1) |
| ISO 11783-5-2001 |
农业和林业用拖拉机及机械.系列控制和通信数据网.第5部分:网络管理 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management) |
| ISO 11783-6-2004 |
农林业用拖拉机及机械设备.串行控制和通信数据网.第6部分:虚拟终端 |
|
| ISO 11783-7 Technical Corrigendum 1-2004 |
农林用拖拉机和机械.系列控制和通信数据网.第7部分:实施信息应用层.技术勘误1 |
|
| ISO 11783-7-2002 |
农林用拖拉机和机械.系列控制和通信数据网.第7部分:实施信息应用层 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 7: Implement messages application layer) |
| ISO 11783-9-2002 |
农林用拖拉机及机械.系列控制和通信数据网.第9部分:ECU 拖拉机 |
(Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 9: Tractor ECU) |
| ISO 11784 AMD 1-2004 |
动物的射频信号识别.代码结构.修改件1 |
|
| ISO 11785-1996 |
动物对无线电频率识别的技术概念 |
(Radio frequency identification of animals - Technical concept) |
| ISO 11786-1995 |
农用拖拉机和农业机械.拖拉机上装的测头界面规范 |
(Agricultural tractors and machinery - Tractor-mounted sensor interface - Specifications) |
| ISO 11787-1995 |
农业和林业机械.管理计算机和过程控制计算机之间的数据交换 |
(Machinery for agriculture and forestry - Data interchange between management computer and process computers - Data interchange syntax) |
| ISO 11788-1-1997 |
农业信息系统间的电子数据交换.农业电子数据辞典.第1部分:一般描述 |
(Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 1: General description) |
| ISO 11788-2-2000 |
农业信息系统间的电子数据交换.农用数据辞典.第2部分:奶牛饲养业 |
(Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 2: Dairy farming) |
| ISO 11788-3-2000 |
农业信息系统间的电子数据交换.农业电子数据辞典.第3部分:猪饲养业 |
(Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 3: Pig farming) |
| ISO 11789-1999 |
刚性切割工具的机动边缘.定义,安全要求和试验过程 |
(Powered edgers with rigid cutting means - Definitions, safety requirements and test procedures) |
| ISO 1179-1981 |
符合ISO 228/1螺纹标准的工业用平口钢管和其它金属管接头 |
(Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications) |
| ISO 11795-1997 |
农业拖拉机用驱动轮胎.测量轮胎滚动圆周的方法 |
(Agricultural tractor drive wheel tyres - Method of measuring tyre rolling circumference) |
| ISO 11798-1999 |
信息和文献工作.纸上书写、印刷和复制的永久性和持久性.要求和试验方法 |
(Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods) |
| ISO 11799-2003 |
信息和文献.归档和图书馆资料的文献存储要求 |
(Information and documentation - Document storage requirements for archive and library materials) |
| ISO 11799-2003 |
信息和文献.归档和图书馆资料的文献存储要求 |
|
| ISO 1180 ADD 1-1985 |
第1次补充 |
(Shanks for pneumatic tools and fitting dimensions of chuck bushings; addendum 1) |
| ISO 1180-1983 |
风动工具的手柄和夹紧轴套的安装尺寸 |
(Shanks for pneumatic tools and fitting dimensions of chuck bushings) |
| ISO 11800-1998 |
信息和文献工作.图书生产中使用的装订方法和装订材料的要求 |
(Information and documentation - Requirements for binding materials and methods used in the manufacture of books) |
| ISO 11806-1997 |
农林机械.内燃机驱动的轻型手持灌木铲除机和草地割草机.安全 |
(Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety) |
| ISO 11807-1-2001 |
集成光学.词汇.第1部分:基本术语和符号 |
(Integrated optics - Vocabulary - Part 1: Basic terms and symbols) |
| ISO 11807-2-2001 |
集成光学.词汇.第2部分:用于分类的术语 |
(Integrated optics - Vocabulary - Part 2: Terms used in classification) |
| ISO 1181-1990 |
马尼拉麻和波罗麻绳索.规范 |
(Ropes; manila and sisal; specification) |
| ISO 1181-2004 |
纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳 |
|
| ISO 1181-2004 |
纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳 |
|
| ISO 11810-2002 |
光学和光学仪器.激光和激光有关设备.手术布单和/或病人防护覆盖层耐激光的试验方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient-protective covers) |
| ISO 11812-2001 |
小艇.防渗水座舱和快速排干座舱 |
(Small craft - Watertight cockpits and quick-draining cockpits) |
| ISO 11813-1998 |
牛奶和牛奶制品.锌含量的测定.火焰原子吸收光谱法 |
(Milk and milk products - Determination of zinc content - Flame atomic absorption spectrometric method) |
| ISO 11814-2002 |
奶粉.热处理度的评定.高效液相色谱法 |
(Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography) |
| ISO 11816-1-1997 |
牛奶和奶制品.荧光计法测定碱性磷酸酶的活性.第1部分:牛奶和牛奶饮料 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Part 1: Milk and milk-based drinks) |
| ISO 11816-2-2003 |
牛奶和奶制品.碱性磷酸酶的活性测定.第2部分:乳酪的荧光计法 |
(Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method of cheese) |
| ISO 11816-2-2003 |
牛奶和奶制品.碱性磷酸酶的活性测定.第2部分:乳酪的荧光计法 |
|
| ISO 11817-1994 |
烘烤后的磨碎的咖啡.水分含量的测定.Karl Fischer方法 |
(Roasted ground coffee - Determination of moisture content - Karl Fischer method (Reference method)) |
| ISO 11819-1-1997 |
声学.路面对交通噪声的影响测量.第1部分:旁路统计法 |
(Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method) |
| ISO 1182-2002 |
建筑材料的对火反应试验.不可燃性试验 |
(Reaction to fire tests for building products - Non-combustibility test) |
| ISO 11820-1996 |
声学.现场用消声器的测量 |
(Acoustics - Measurements on silencers in situ) |
| ISO 11821-1997 |
声学.可移遮板现场声音降低的测量 |
(Acoustics - Measurement of the in situ sound attenuation of a removable screen) |
| ISO 11822-1996 |
信息和文献工作.目录信息交换用阿拉伯字母代码字符集的扩展 |
(Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange) |
| ISO 11825-1995 |
纺织机械及其配件.针织机用舌型针.针杆宽度和提花机竖钩高度的调理 |
(Textile machinery and accessories - Latch-type needles for knitting machines - Coordination of shank widths and hook heights) |
| ISO 1183-1-2004 |
塑料.非泡沫塑料的密度测定方法.第1部分:浸渍法、液体比重瓶法和滴定法 |
|
| ISO 1183-2-2004 |
塑料.非泡沫塑料的密度测定方法.第2部分:密度梯度管法 |
|
| ISO 1183-2-2004 |
塑料.非泡沫塑料的密度测定方法.第2部分:密度梯度管法 |
|
| ISO 1183-2-2004 |
塑料.非泡沫塑料的密度测定方法.第2部分:密度梯度管法 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com