标准号 |
中文名称 |
英文名称 |
ISO 6280-1981 |
滑动轴承.薄壁多层轴承轴瓦的要求 |
Plain bearings; Requirements on backings for thick-walled multilayer bearings |
ISO 6282-1983 |
滑动轴承.金属薄壁轴瓦.δ0.01极限值的测定 |
Plain bearings; metallic thin-walled half bearings; determination of the sigma 0,01-limit |
ISO 6283-1995 |
精炼镍 |
Refined nickel |
ISO 6284-1996 |
建筑图纸极限偏差表示法 |
Construction drawings - Indication of limit deviations |
ISO 6286-1982 |
分子吸收光谱.词汇.总则.仪器 |
Molecular absorption spectrometry; Vocabulary; General; Apparatus |
ISO 6289 AMD 1-1993 |
雪橇.术语和定义.修改件1 |
Skis; terms and definitions; amendment 1 |
ISO 6289 AMD 2-1997 |
滑雪板.术语和定义.修订2 |
Skis - Terms and definitions; Amendment 2 |
ISO 6289 DAM 1-1992 |
雪橇.修改1 |
Skis; terms and definitions; amendment 1 |
ISO 6289-1985 |
滑雪板.术语和定义.三语版 |
Skis; Terms and definitions Trilingual edition |
ISO 6289-2003 |
滑雪板.词汇 |
(Skis - Vocabulary) |
ISO 6289-2003 |
滑雪板.词汇 |
|
ISO 629-1982 |
钢和铸铁.锰含量的测定.分光光度法 |
Steel and cast iron; Determination of manganese content; Spectrophotometric method |
ISO 6292-1996 |
工业用机动运货车和拖车.制动性能和组合强度 |
Powered industrial trucks and tractors - Brake performance and component strength |
ISO 6293-1-1996 |
石油产品.皂化值的测定.第1部分:颜色指示滴定法 |
Petroleum products - Determination of saponification number - Part 1: Colour indicator titration method |
ISO 6293-2-1998 |
石油产品.测定皂化值.第2部分:电位滴定法 |
Petroleum products - Determination of saponification number - Part 2: Potentiometric titration method |
ISO 6295-1983 |
石油产品.矿物质润滑油.油对水的界面张力的测定.圆环法 |
Petroleum products; Mineral oils; Determination of interfacial tension of oil against water; Ring method |
ISO 6296-2000 |
石油产品.水的测定.电位测量卡尔费歇尔滴定法 |
Petroleum products - Determination of water - Potentiometric Karl Fischer titration method |
ISO 6297-1997 |
石油产品.含有静态雾化添加剂的航空和蒸馏燃料.导电率的测定 |
Petroleum products - Aviation and distillate fuels - Determination of electrical conductivity |
ISO 6299-1998 |
石油产品.润滑脂滴点的测定(大温度范围) |
Petroleum products - Determination of dropping point of lubricating greases (wide temperature range) |
ISO 630 AMD 1-2003 |
结构钢.板材、宽扁材、棒材、型材和异型材.修改件1 |
(Structural steels - Plates, wide flats, bars, sections and profiles; Amendment 1 ) |
ISO 630 AMD 1-2003 |
结构钢.板材、宽扁材、棒材、型材和异型材.修改件1 |
|
ISO 630-1995 |
结构钢.板材、宽带材、棒材、截面和剖面 |
Structural steels - Plates, wide flats, bars, sections and profiles |
ISO 630-2-2000 |
结构钢.第2部分:热精整空心型材的技术交付要求 |
Structural steels - Part 2: Technical delivery requirements for hot-finished hollow sections |
ISO 6301-1-1997 |
气压传动.空气压缩润滑器.第1部分:包括在供应商文件中的主要特性和产品标识说明 |
Pneumatic fluid power - Compressed air lubricators - Part 1: Main characteristics to be included in supplier`s literature and product-marking requirements |
ISO 6301-2-1997 |
气压传动.空气压缩润滑器.第2部分:测定包括在供货商文件中的主要特性的试验方法 |
Pneumatic fluid power - Compressed air lubricators - Part 2: Test methods to determine the main characteristics to be included in supplier`s literature |
ISO 6302-1993 |
土方机械.排液、注液口和液面口螺塞 |
Earth-moving machinery; drain, fill and level plugs |
ISO 6303-1981 |
不包括ISO 2604第1~6部分的压力容器钢.持久应力断裂特性的推导 |
Pressure vessel steels not included in ISO 2604, Parts 1 to 6; Derivation of long-time stress rupture properties |
ISO 6305-2-1983 |
铁路构件.交货的技术条件.第2部分:非合金碳钢的底板 |
Railway components; technical delivery requirements; part 2: unalloyed carbon steel baseplates |
ISO 6305-3-1983 |
铁路构件.交货技术条件.第3部分:钢轨枕 |
Railway components; technical delivery requirements; part 3: steel sleepers |
ISO 6305-4-1985 |
铁路构件.交货技术条件.第4部分:鱼尾板和紧固件用的非处理钢螺母和螺栓及高强度螺母和螺栓 |
Railway components; technical delivery requirements; part 4: untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings |
ISO 6308-1980 |
熟石膏板规范 |
Gypsum plasterboard; Specification |
ISO 6309-1987 |
火灾预防.安全标志 |
Fire protection; Safety signs Bilingual edition |
ISO 631-1975 |
地板用镶木板.一般特性 |
Mosaic parquet panels; General characteristics |
ISO 6310-2001 |
道路车辆.制动闸衬.压缩应变试验方法 |
Road vehicles - Brake linings - Compressive strain test method |
ISO 6311-1980 |
道路车辆.制动闸衬.闸衬材料的内剪切强度.试验程序 |
Road vehicles; Brake linings; Internal shear strength of lining material; Test procedure |
ISO 6312-2001 |
道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片装置的剪切试验程序 |
Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies |
ISO 6313-1980 |
道路车辆.制动闸衬.圆形制动垫片尺寸和形状的热效应.试验程序 |
Road vehicles; Brake linings; Effects of heat on dimensions and form of disc brake pads; Test procedure |
ISO 6314-1980 |
道路车辆.制动闸衬.耐水、耐盐溶液、耐油和耐液压液的性能.试验程序 |
Road vehicles; Brake linings; Resistance to water, saline solution, oil and brake fluid; Test procedure |
ISO 6315-1980 |
道路车辆.闸衬.腐蚀对衬片与铁质结合面的胶接.试验程序 |
Road vehicles; Brake linings; Seizure to ferrous mating surface due to corrosion; Test procedure |
ISO 6316-2000 |
结构级热轧钢带 |
Hot-rolled steel strip of structural quality |
ISO 6317-2000 |
工业用和拉伸用热轧碳素钢带 |
Hot-rolled carbon steel strip of commercial and drawing qualities |
ISO 6320-2000 |
动植物脂肪和油.折射指数的测定 |
Animal and vegetable fats and oils - Determination of refractive index |
ISO 6321-2002 |
动植物脂肪和油.开口毛细管中的熔点(裂解点)测定 |
Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) |
ISO 6322-1-1996 |
谷类和豆类的贮存.第1部分:谷类保存的一般推荐方法 |
Storage of cereals and pulses - Part 1: General recommendations for the keeping of cereals |
ISO 6322-2-2000 |
谷类和豆子的贮存.第2部分:推荐操作规程 |
Storage of cereals and pulses - Part 2: Practical recommendations |
ISO 6322-3-1989 |
谷类和豆类的贮存.第3部分:防治害虫的侵蚀 |
Storage of cereals and pulses; part 3: control of attack by pests |
ISO 6325-1987 |
造船.缆绳限止器 |
Shipbuilding; Cable stoppers |
ISO 6326-1-1989 |
天然气.硫化物的测定.第1部分:概述 |
Natural gas; determination of sulfur compounds; part 1: general introduction |
ISO 6326-2-1981 |
气体分析.天然气中硫化物的测定.第2部分:对于有气味的硫化物的测定,用电化学检测器的气相色谱法 |
Gas analysis; Determination of sulphur compounds in natural gas; Part 2 : Gas chromatographic method using an electrochemical detector for the determination of odoriferous sulphur compounds |
ISO 6326-3-1989 |
天然气.硫化物的测定.第3部分:用电势分析法对硫化氢、硫醇式硫和硫化羰式硫的测定 |
Natural gas; determination of sulfur compounds; part 3: determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
ISO 6326-4-1994 |
天燃气.硫化物的测定.第4部分:用火焰光度检测器使用气相色谱分析法测定硫化氢,硫化羟以及乙硫醇的含硫量 |
Natural gas; determination of sulfur compounds; part 4: gas chromatographic method using a flame photometric detector for the determination of hydrogen sulfide, carbonyl sulfide and sulfur-containing odorants |
ISO 6326-5-1989 |
天燃气.硫化物的测定.第5部分:林格聂尔(lingener)燃烧法 |
Natural gas; determination of sulfur compounds; part 5: Lingener combustion method |
ISO 6327-1981 |
气体分析.天然气水露点的测定.用表面冷凝湿度计测定 |
Gas analysis; Determination of the water dew point of natural gas; Cooled surface condensation hygrometers |
ISO 6328-2000 |
摄影技术.照相材料.ISO分辨率的测定 |
Photography - Photographic materials - Determination of ISO resolving power |
ISO 633-1986 |
软木.词汇.两种语言版 |
Cork; Vocabulary Bilingual edition |
ISO 6330-2000 |
纺织品.织物测试用家庭洗涤和干燥程序 |
Textiles - Domestic washing and drying procedures for textile testing |
ISO 6331-1983 |
铬矿石和铬精矿.铬含量的测定.滴定法 |
Chromium ores and concentrates; Determination of chromium content; Titrimetric method |
ISO 6332-1988 |
水质.铁的测定.1,10-菲咯啉光谱测定法 |
Water quality; determination of iron; spectrometric method using 1,10-phenanthroline |
ISO 6333-1986 |
水质.锰的测定.甲醛肟光谱测定法 |
Water quality; Determination of manganese; Formaldoxime spectrometric method |
ISO 6336-1 Technical Corrigendum 1-1998 |
正齿轮和斜齿轮承载能力的计算.第1部分:基本原理、说明和一般影响因素.技术勘误1 |
Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors; Technical Corrigendum 1 |
ISO 6336-1 Technical Corrigendum 2-1999 |
正齿轮和斜齿轮承载能力的计算.第1部分:基本原理、说明和一般影响因素.技术勘误2 |
Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors; Technical Corrigendum 2 |
ISO 6336-1-1996 |
正齿轮和斜齿轮承载能力的计算.第1部分:基本原理、说明和一般影响因素 |
Calculation of load capacity of spur and helical gears - Part 1: Basic prinicples, introduction and general influence factors |
ISO 6336-2 Technical Corrigendum 1-1998 |
正齿轮和斜齿轮承载能力的计算.第2部分:齿轮表面耐用能力(点腐蚀)的计算.技术勘误1 |
Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting); Technical Corrigendum 1 |
ISO 6336-2 Technical Corrigendum 2-1999 |
正齿轮和斜齿轮承载能力的计算.第2部分:表面耐力的计算(形成凹坑).技术勘误2 |
Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pittings); Technical Corrigendum 2 |
ISO 6336-2-1996 |
正齿轮和斜齿轮承载能力的计算.第2部分:齿轮表面耐用能力的计算 |
Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pittings) |
ISO 6336-3 Technical Corrigendum 1-1999 |
正齿轮和斜齿轮承载能力的计算.第3部分:轮齿弯曲强度的计算.技术勘误1 |
Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength; Technical Corrigendum 1 |
ISO 6336-3-1996 |
正齿轮和斜齿轮承载能力的计算.第3部分:轮齿弯曲强度的计算 |
Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength |
ISO 6336-5-1996 |
正齿轮和斜齿轮承载能力的计算.第5部分:材料的强度和质量 |
Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials |
ISO 6336-5-2003 |
直齿轮和斜齿轮承载能力的计算.第5部分:材料的强度和质量 |
(Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials) |
ISO 6336-5-2003 |
直齿轮和斜齿轮承载能力的计算.第5部分:材料的强度和质量 |
|
ISO 6340-1995 |
水的质量.沙门氏菌种的检测 |
Water quality - Detection of Salmonella species |
ISO 6341 Technical Corrigendum 1-1998 |
水质.抑制大型(Daphniamagna Straus(枝角目,甲壳纲)活动性的测定.技术勘误1 |
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test; Technical Corrigendum 1 |
ISO 6341-1996 |
水质.抑制Daphnia magna Straus(枝角目,甲壳纲)活动性的测定.剧毒试验 |
Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test |
ISO 6342-1993 |
缩微摄影技术.贴边式开窗卡片.增厚区厚度的测量方法 |
Micrographics; aperture cards; method of measuring thickness of buildup area |
ISO 6342-2003 |
缩微摄影技术.开窗卡.增厚区厚度的测量方法 |
(Micrographics - Aperture cards - Method of measuring thickness of buildup area) |
ISO 6342-2003 |
缩微摄影技术.开窗卡.增厚区厚度的测量方法 |
|
ISO 6343-1981 |
缩微摄影技术.通用的缩微胶片载体(穿孔卡).保护片与穿孔粘合力的测定 |
Micrographics; Unitized microfilm carrier (aperture card); Determination of adhesion of protection sheet to aperture adhesive |
ISO 6344-1-1998 |
砂布.粒度分析.第1部分:粒度分布试验 |
Coated abrasives - Grain size analysis - Part 1: Grain size distribution test |
ISO 6344-2-1998 |
砂布.粒度分析.第2部分:P12-P220粗磨料的粒度分布测定 |
Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 |
ISO 6344-3 Technical Corrigendum 1-1999 |
涂覆磨料.粒度分析.第3部分:P240-P2500细微磨光粉粒度分布测定.技术勘误1 |
Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500; Technical Corrigendum 1 |
ISO 6344-3-1998 |
涂覆磨料.粒度分析.第3部分:P240-P2500细微磨光粉粒度分布测定 |
Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
ISO 6345-1990 |
造船和海上建筑物.窗和侧舷窗.词汇 |
Shipbuilding and marine structures; windows and side scuttles; vocabulary |
ISO 6346-1995 |
货运集装箱的编码、识别和标志 |
Freight containers - Coding, identification and marking |
ISO 6347-1989 |
铺地织物.用户信息 |
Textile floor coverings; consumer information |
ISO 6347-2004 |
铺地织物.用户信息 |
|
ISO 6348-1980 |
纺织品.质量的测定.词汇 |
Textiles; Determination of mass; Vocabulary |
ISO 6351-1985 |
镍.银、铋、镉、钴、铜、铁、锰、铅和锌含量的测定.火焰原子吸收光谱测定法 |
Nickel; Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc contents; Flame atomic absorption spectrometric method |
ISO 6352-1985 |
镍铁.镍含量的测定.丁二酮肟重量分析法 |
Ferronickel; Determination of nickel content; Dimethylglyoxime gravimetric method |
ISO 6353-1-1982 |
化学分析试剂.第1部分:一般试验方法 |
Reagents for chemical analysis; Part 1 : General test methods |
ISO 6353-2 ADD 2-1986 |
第2次补充 |
Reagents for chemical analysis; specifications; series one;; addendum 2 |
ISO 6353-2-1983 |
化学分析试剂.第2部分:规范.第一系列 |
Reagents for chemical analysis; Part 2 : Specifications; First series |
ISO 6353-3-1987 |
化学分析试剂.第3部分:规范.第二系列 |
Reagents for chemical analysis; Part 3 : Specifications; Second series |
ISO 6356-2000 |
铺地织物.静电性评定.行走试验 |
Textile floor coverings - Assessment of static electrical propensity - Walking test |
ISO 6357-1985 |
文献工作.书籍和其它出版物的主标题 |
Documentation; Spine titles on books and other publications |
ISO 6358-1989 |
气压传动.可压缩流体用部件.流量特性的测定 |
Pneumatic fluid power; components using compressible fluids; determination of flow-rate characteristics |
ISO 6359-1982 |
货运集装箱.数据摘要板 |
Freight containers; Consolidated data plate |
ISO 636-1989 |
在非合金或低合金钢上堆焊、钨极惰性气体保护焊用的氧乙炔焊的实心、裸焊条编码 |
Bare solid filler rods for oxy-acetylene and tungsten inert gas arc (TIG) welding, depositing an unalloyed or low alloyed steel; codification |
ISO 636-2004 |
焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类 |
|
ISO 6360-1 ADD 1-1988 |
第1次补充 |
Dental rotary instruments; number coding system; part 1: general characteristics; addendum 1 |
ISO 6360-1-1985 |
牙科用旋转器械.数字编码体系.第1部分:一般性能.两种语言版 |
Dental rotary instruments; Number coding system; Part 1 : General characteristics Bilingual edition |
ISO 6360-1-2004 |
牙科学.牙科旋转器械的数字编码体系.第1部分:一般特性 |
|
ISO 6360-2 AMD 1-1991 |
牙科用旋转器械.数字编码系统.第2部分:形状与特性.第1次修改 |
Dental rotary instruments; number coding system; part 2: shape and specific characteristics; amendment 1 |
ISO 6360-2-1986 |
牙科用旋转器械.数字编码体系.第2部分:形状和特殊性能.两种语言版 |
Dental rotary instruments; Number coding system; Part 2 : Shape and specific characteristics Bilingual edition |
ISO 6360-2-2004 |
牙科学.旋转器械用数字编码体系.第2部分:形状 |
|
ISO 6360-2-2004 |
牙科学.旋转器械用数字编码体系.第2部分:形状 |
|
ISO 6360-4-2004 |
牙科学.旋转器械的数字编码体系.第4部分:金刚石器械的具体特性 |
|
ISO 6360-6-2004 |
牙科学.旋转器械的数字编码体系.第6部分:研磨器械的具体特性 |
|
ISO 6361-1-1986 |
锻铝和铝合金片材带材和板材.第1部分:交货和验收的技术条件 |
Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for inspection and delivery |
ISO 6361-2-1990 |
锻铝和铝合片材,带材和板材.第2部分:机械性能 |
Wrought aluminium and aluminium alloy sheets, strips and plates; part 2: mechanical properties |
ISO 6361-3-1985 |
锻铝和铝合金?濉⒋暮桶宀?第3部分:带材.形状和尺寸公差 |
Wrought aluminium and aluminium alloy sheets, strips and plates; Part 3 : Strips; Tolerances on shape and dimensions (Previously referenced DIS 8219) |
ISO 6361-4-1988 |
锻铝和铝合金?濉⒋暮桶宀?形状公差和尺寸 |
Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates; tolerances on shape and dimensions |
ISO 6362-1-1986 |
锻铝和铝合金挤压棒/辊,管和型植材.第1部分:机械性能 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical conditions for inspection and delivery |
ISO 6362-2-1990 |
锻铝和铝合金挤压棒/条、管与型材.第2部分:机械性能 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 2: mechanical properties |
ISO 6362-3-2001 |
锻铝和铝合金挤压杆材/棒材、管和型材.第3部分:挤压扁形棒材.形状和尺寸公差 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 3: Extruded rectangular bars; Tolerances on shape and dimensions |
ISO 6362-4-1988 |
锻铝和铝合金挤压棒/条、管与型材.第4部分:挤压型材.形状公差和尺寸 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 4: extruded profiles; tolerances on shape and dimensions |
ISO 6362-5-2001 |
锻铝和铝合金挤压棒/辊,管和型材.第5部分:挤压园形方形和六角形棒材,形状和尺寸公差 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded round, square and hexagonal bars; Tolerances on shape and dimensions |
ISO 6363-1-1988 |
锻铝和铝合金冷拉棒/条和管子.第1部分:检查及运输的技术条件 |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions for inspection and delivery |
ISO 6363-2-1993 |
锻铝和铝合金.冷拔棒材和管材.第2部分:机械性能 |
Wrought aluminium and aluminium alloy; cold-drawn rods/bars and tubes; part 2: mechanical properties |
ISO 6363-4-1991 |
锻铝及铝合金冷拔棒/杆材和管材.和管材.第4部分:拉制矩形条.形状和尺寸公差 |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 4: drawn rectangular bars; tolerances on form and dimensions |
ISO 6363-5-1992 |
锻铝及铝合金冷拔棒/杆材和管材.第5部分:冷拔方形和六角形棒材.形状和尺寸公差 |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 5: drawn square and hexagonal bars; tolerances on form and dimensions |