标准号 |
中文名称 |
英文名称 |
BS EN ISO 11807-1-2005 |
集成光学.词汇.基本术语和符号 |
|
BS EN ISO 11807-2-2005 |
集成光学.词汇.分类用术语 |
|
BS EN ISO 1181-2004 |
纤维绳索.马尼拉麻和剑麻.3、4和8股绞绳 |
|
BS EN ISO 11810-2002 |
光学和光学仪器.激光器和有关激光设备.手术用帘和/或病人防护苫布耐激光强度的试验方法 |
(Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient-protective covers) |
BS EN ISO 11812-2002 |
小艇.不渗水座舱和快速排干座舱 |
(Small craft - Watertight cockpits and quick-draining cockpits) |
BS EN ISO 11816-1-2000 |
牛奶和奶制品.荧光计法测定碱性磷酸酶的活性.牛奶和牛奶饮料 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Milk and milk based drinks) |
BS EN ISO 11816-2-2003 |
牛奶和奶制品.用荧光计法测定碱性磷酸酶的活性.乳酪的荧光计法 |
(Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Fluorometric method for cheese) |
BS EN ISO 11819-1-2000 |
声学.路面对交通噪声影响力的测量.旁路统计法 |
(Acoustics - Measurement of the influence of road surfaces on traffic noise - Statistical pass-by method) |
BS EN ISO 1182-2002 |
建筑产品耐火反应试验.不可燃性试验 |
(Reaction to fire tests for building products - Non-combustibility test) |
BS EN ISO 11820-1997 |
声学.现场用消声器的测量 |
(Acoustics - Measurements on silencers in situ) |
BS EN ISO 11821-1997 |
声学.可移遮板就地声音降低的测量 |
(Acoustics - Measurement of the in situ sound attenuation of a removable screen) |
BS EN ISO 1183-1-2004 |
塑料.非泡沫塑料的密度测定方法.浸渍法、液体比重瓶法和滴定法 |
|
BS EN ISO 1183-2-2004 |
塑料.非泡沫塑料的密度测定方法.密度梯度管法 |
|
BS EN ISO 1183-3-1999 |
塑料.非泡沫塑料的密度测定方法.气体比重瓶测量法 |
(Plastics - Methods for determining the density of non-cellular plastics - Gas pyknometer method) |
BS EN ISO 11857-1999 |
铺地织物.耐剥离性测定 |
(Textile floor coverings - Determination of resistance to delamination) |
BS EN ISO 11885-1998 |
水质.通过感应耦合等离子原子发散分光光度计对33种素的测定 |
(Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy) |
BS EN ISO 11897-2001 |
包装.热塑软薄膜制袋.折边处的撕裂扩展试验 |
(Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds) |
BS EN ISO 119-1978 |
塑料.苯酚-甲醛模塑.单体酚的测定.碘量法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method) |
BS EN ISO 11904-1-2002 |
声学.从接近耳朵声源测定声发射强度.利用人耳中麦克风技术 |
(Acoustics - Determination of sound immission from sound sources placed close to the ear - Technique using a microphone in a real ear (MIRE technique)) |
BS EN ISO 11904-2-2004 |
声学.测定近耳声源的声发射.利用人体模型的技术 |
|
BS EN ISO 11905-1-1998 |
水质.氮的测定.用过氧焦硫酸盐进行氧化溶解的方法 |
(Water quality - Determination of nitrogen - Method using oxidative digestion with peroxodisulfate) |
BS EN ISO 11908-1996 |
漆和涂料用粘合剂.胺树脂.一般试验法 |
(Binders for paints and varnishes - Amino resins - General methods of test) |
BS EN ISO 11909-1996 |
漆和涂料用粘合剂.聚异氰酸树脂.一般试验法 |
(Binders for paints and varnishes - Polyisocyanate resins - General methods of test) |
BS EN ISO 11925-2-2002 |
着火试验反应.受火焰直接熏烤的建筑产品的可燃性.单一火焰源试验 |
(Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Single-flame source test) |
BS EN ISO 11957-1997 |
声学.客舱隔音功能的测定.实验室和现场测量 |
(Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements) |
BS EN ISO 11960-2001 |
石油和天然气工业.油井套管和油管用钢管 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) |
BS EN ISO 11960-2005 |
石油和天然气工业.油井套管或油管用钢管 |
|
BS EN ISO 11961-1997 |
石油和天然气工业.钻探管用钢管.规范 |
(Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification) |
BS EN ISO 11963-1996 |
塑料.聚碳酸酯薄板材的类型、尺寸和特性 |
(Plastics - Polycarbonate sheets - Types, dimensions and characteristics) |
BS EN ISO 11969-1996 |
水质.砷的测定.原子吸收分光光度法(氢化技术) |
(Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)) |
BS EN ISO 11978-2000 |
眼科光学.接触镜片和接触镜片护理产品.制造商提供的信息 |
(Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer) |
BS EN ISO 11979-1-2000 |
眼科植入物.眼内晶状体.词汇 |
(Ophthalmic implants - Intraocular lenses - Vocabulary) |
BS EN ISO 11979-2-2000 |
眼科植入物.眼内晶状体.光学特性和试验方法 |
(Ophthalmic implants - Intraocular lenses - Optical properties and test methods) |
BS EN ISO 11979-4-2000 |
眼科植入物.眼内透镜.贴标签和信息 |
(Ophthalmic implants - Intraocular lenses - Labelling and information) |
BS EN ISO 11980-1998 |
眼科光学.接触镜片和接触镜片护理产品.临床检测指南 |
(Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations) |
BS EN ISO 11981-1999 |
眼科光学.接触镜片和接触镜片保护产品.接触镜片保护产品与接触镜片的物理兼容性的测定 |
(Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses) |
BS EN ISO 11984-2000 |
眼科光学.接触镜片.刚性镜片弯曲和断裂强度的测定 |
(Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage) |
BS EN ISO 11985-1998 |
眼科光学.接触镜片.暴露于紫外线和可见光辐射的老化(体外法) |
(Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method)) |
BS EN ISO 11987-1998 |
眼科光学.接触透镜.储藏寿命的测定 |
(Ophthalmic optics - Contact lenses - Determination of shelf-life) |
BS EN ISO 11990-2003 |
光学和光学仪器.激光和激光相关设备.气管柄激光抗性的测定 |
(Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts) |
BS EN ISO 120-1978 |
塑料.苯酚-甲醛模塑.游离氨和铵化合物的测定.比色法 |
(Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method) |
BS EN ISO 12001-1997 |
声学.机械设备产生的噪声.噪声试验规程的介绍和起草规则 |
(Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code) |
BS EN ISO 12005-2003 |
激光和激光相关设备.激光束参数的试验方法.偏振 |
|
BS EN ISO 12005-2003 |
激光和激光相关设备.激光束参数的试验方法.偏振 |
(Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization) |
BS EN ISO 12017-1996 |
塑料.聚甲基丙烯酸甲酯双合板和三合板的试验方法 |
(Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods) |
BS EN ISO 12020-2000 |
水的质量.铝的测定.原子吸收分光光度测定法 |
(Water quality - Determination of aluminium - Atomic absorption spectrometric methods) |
BS EN ISO 12048-2001 |
包装.完全满运输包装件.用压缩试验机进行压缩试验和堆积试验 |
(Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester) |
BS EN ISO 12058-1-1997 |
塑料.使用落球粘度计测定粘度.斜管法 |
(Plastics - Determination of viscosity using a falling-ball viscometer - Inclined-tube method) |
BS EN ISO 1207-1993 |
一字槽圆柱头螺钉.A级产品 |
(Slotted cheese head screws - Product grade A) |
BS EN ISO 12085-1997 |
几何制品规范(GPS).表面特征.轮廓法.主要参数 |
(Geometric Product Specification (GPS) - Surface texture - Profile method - Motif parameters) |
BS EN ISO 12100-1-2003 |
机械安全.设计基本概念和一般原理.基本术语和方法 |
(Safety of machinery - Basic concepts, general principles for design - Basic terminology, methodology) |
BS EN ISO 12100-2-2003 |
机械安全.设计基本概念和一般原理.技术原理 |
(Safety of machinery - Basic concepts, general principles for design - Technical principles) |
BS EN ISO 1211-2001 |
牛奶.脂肪含量的测定.重量分析法(参照法) |
(Milk - Determination of fat content - Gravimetric method (Reference method)) |
BS EN ISO 12114-1997 |
纤维增强塑料.热固性模塑化合物和聚酯胶片.固化特性的测定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics) |
BS EN ISO 12115-1997 |
纤维增强塑料.热固性模塑化合物和聚酯胶片.流动能力和储存期限的测定 |
(Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life) |
BS EN ISO 12138-1997 |
纺织材料.纺织纤维作易燃性试验前的家用洗涤方法 |
(Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing) |
BS EN ISO 12156-1-2000 |
柴油.高频往复设备(HFRR)用润滑剂性能评定.试验方法. |
(Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Test method) |
BS EN ISO 12162-1996 |
压力管道和配件用热塑性塑料.分类和设计.总体设备的设计系数 |
(Thermoplastics materials for pipes and fittings for pressure applications - Classification and design - Overall service (design) coefficient) |
BS EN ISO 12163-2000 |
牙科基盘/制模蜡 |
(Dental baseplate/modelling wax) |
BS EN ISO 12179-2001 |
几何产品规范(GPS).表面质地:段面法.接触式(针式)仪器的校准 |
(Geometrical product specifications (GPS) - Surface texture - Profile method - Calibration of contact (stylus) instruments) |
BS EN ISO 12185-1996 |
原油和石油产品.密度测定.振荡U形管法 |
(Methods of test for petroleum and its products - Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method) |
BS EN ISO 12193-2004 |
动植物脂肪和油.用直接石墨炉原子吸收光谱法测定铅含量 |
|
BS EN ISO 12205-1996 |
石油及其产品.石油产品.柴油燃料氧化稳定性的测定 |
(Methods of test for petroleum and its products - Petroleum products - Determination of the oxidation stability of middle-distillate fuels) |
BS EN ISO 12209-1-2001 |
气瓶.压缩的可呼吸气体用气瓶阀的外部连接.叉形连接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Yoke type connections) |
BS EN ISO 12209-2-2001 |
气瓶.压缩的可呼吸气体用气瓶阀的外部连接.螺纹连接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Threaded connections) |
BS EN ISO 12209-3-2001 |
气瓶.压缩的可呼吸气体用气瓶阀的外部连接.230巴阀门连接适配器 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Adaptor for 230 bar valves) |
BS EN ISO 12215-1-2000 |
小艇.船体构造和船材尺寸.材料.玻璃纤维增强热固性树脂标准叠层板材 |
(Small craft - Hull construction and scantlings - Materials - Thermosetting resins, glass-fibre reinforcement, reference laminate) |
BS EN ISO 12215-2-2002 |
小艇.船体构造和船材尺寸.材料.夹层结构芯材料.嵌入材料 |
(Small craft - Hull construction and scantlings - Materials - Core materials for sandwich construction, embedded materials) |
BS EN ISO 12215-3-2002 |
小艇.船体构造和船材尺寸.材料.钢、铝合金及其它材料 |
(Small craft - Hull construction and scantlings - Materials - Steel, aluminium alloys, wood, other materials) |
BS EN ISO 12215-4-2002 |
小艇.船体构造和船材尺寸.车间和生产 |
(Small craft - Hull construction and scantlings - Workshop and manufacturing) |
BS EN ISO 12216-2002 |
小船.窗口,舷窗,舱口,舷窗盖和门的强度和不透水性要求 |
(Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements) |
BS EN ISO 12217-1-2002 |
小型船舶.稳定性和浮力评估和分类.船体大于或等于6米的无帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Non-sailing boats of hull length greater than or equal to 6 m) |
BS EN ISO 12217-2-2002 |
小型船舶.稳定性和浮力评估和分类.船体大于或等于6米的带帆小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Sailing boats of hull length greater than or equal to 6 m) |
BS EN ISO 12217-3-2002 |
小艇.稳定性和浮力评估和分类.船体长度小于6米的小艇 |
(Small craft - Stability and buoyancy assessment and categorization - Boats of hull length less than 6 m) |
BS EN ISO 12224-1-1998 |
焊丝、固体熔剂和助焊剂.规范和试验方法.分类和性能要求 |
(Solder wire, solid and flux cored - Specification and test methods - Classification and performance requirements) |
BS EN ISO 12224-2-1999 |
助熔填充焊丝和实芯焊条.规范和试验方法.助熔剂含量的测定 |
(Solder wire, solid and flux cored - Specification and test methods - Determination of flux content) |
BS EN ISO 12224-3-2003 |
实心和管状钎料焊丝.规范和试验方法.管状钎料焊丝效能的润湿平衡法 |
(Solder wire, solid and flux cored - Specification and test methods - Wetting balance test method for flux core solder wire efficacy) |
BS EN ISO 12228-1999 |
动物和植物脂肪和油脂.分和总甾醇含量的测定.气相色谱法 |
(Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method) |
BS EN ISO 12236-1996 |
土工织物及有关土工织物制品.静态戳孔试验(CBR 试验) |
(Geotextiles and geotextile-related products - Static puncture test (CBR-Test)) |
BS EN ISO 12241-1998 |
建筑设备和工业装置的热绝缘.计算规则 |
(Thermal insulation for building equipment and industrial installations - Calculation rules) |
BS EN ISO 1234-1998 |
开口销 |
(Split pins) |
BS EN ISO 12543-1-1998 |
建筑物用玻璃.夹层玻璃和夹层安全玻璃.定义和零部件的描述 |
(Glass in building - Laminated glass and laminated safety glass - Definitions and description of component parts) |
BS EN ISO 12543-3-1998 |
建筑物用玻璃.夹层玻璃和夹层安全玻璃.夹层玻璃 |
(Glass in building - Laminated glass and laminated safety glass - Laminated glass) |
BS EN ISO 12543-4-1998 |
建筑物用玻璃.夹层玻璃和夹层安全玻璃.耐久性试验方法 |
(Glass in building - Laminated glass and laminated safety glass - Test methods for durability) |
BS EN ISO 12543-5-1998 |
建筑物用玻璃.夹层玻璃和夹层安全玻璃.尺寸和边缘整理 |
(Glass in building - Laminated glass and laminated safety glass - Dimensions and edge finishing) |
BS EN ISO 12543-6-1998 |
建筑物用玻璃.夹层玻璃和夹层安全玻璃.外观 |
(Glass in building - Laminated glass and laminated safety glass - Appearance) |
BS EN ISO 12567-1-2000 |
门窗的热性能.加热箱法测定热传递系数.完整的门窗 |
(Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Complete windows and doors) |
BS EN ISO 12569-2001 |
建筑物的隔热性.建筑物中空气变化的测定.示踪气体稀释法 |
(Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method) |
BS EN ISO 12570-2000 |
建筑材料和产品热液性能.用高温干燥法测定潮气的含量 |
(Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature) |
BS EN ISO 12571-2000 |
建筑材料和产品热液性能.吸湿特性的测定 |
(Hygrothermal performance of building materials and products - Determination of hygroscopic properties) |
BS EN ISO 12572-2001 |
建筑材料和产品的冷热性能.水蒸气传输性能的测定 |
(Hygrothermal performance of building materials and products - Determination of water vapour transmission properties) |
BS EN ISO 12625-1-2005 |
薄纸和薄纸制品.术语的一般指南 |
|
BS EN ISO 12625-3-2005 |
薄纸和薄纸制品.厚度、膨胀厚度和表观体密度的测定 |
|
BS EN ISO 12625-6-2005 |
薄纸和薄纸制品.克数测定 |
|
BS EN ISO 12625-9-2005 |
薄纸和薄纸制品.钢球式顶破强力的测定 |
|
BS EN ISO 1264-1997 |
塑料.氯乙烯的均聚物和共聚物树脂.水萃物的pH值测定 |
(Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract) |
BS EN ISO 1265-1997 |
塑料.聚氯乙烯树脂.杂质和外来杂质数的测定 |
(Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles) |
BS EN ISO 12677-2003 |
用XRF对耐火制品进行化学分析.熔铸珠法 |
(Chemical analysis of refractory products by XRF - Fused cast bead method) |
BS EN ISO 12683-2004 |
机械镀锌涂层.规范和试验方法 |
|
BS EN ISO 12687-1998 |
金属覆层.孔隙率试验.湿硫(硫华)试验 |
(Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test) |
BS EN ISO 12706-2001 |
无损检验.术语.渗透检验用术语 |
(Non-destructive testing - Terminology - Terms used in penetrant testing) |
BS EN ISO 12737-1999 |
金属材料.平面变形断裂韧性的测定 |
(Metallic materials - Determination of plane-strain fracture toughness) |
BS EN ISO 12777-1-1995 |
托盘连接件的检验方法.托盘用钉子、其它榫钉型紧固件和U形钉的抗弯曲的测定 |
(Methods of test for pallet joints - Determination of bending resistance of pallet nails, other dowel-type fasteners and staples) |
BS EN ISO 12777-2-2000 |
托盘连接件的检验方法.托盘用钉子耐拉伸性的测定 |
(Methods of test for pallet joints - Determination of withdrawal and head pull-through resistance of pallet nails and staples) |
BS EN ISO 12777-3-2002 |
托盘连接件的试验方法.托盘连接件强度的测定 |
(Methods of test for pallet joints - Determination of strength of pallet joints) |
BS EN ISO 128-20-2000 |
技术图纸.表示的一般原则.直线的基本规定 |
(Technical drawings - General principles of presentation - Basic conventions for lines) |
BS EN ISO 128-21-2000 |
技术图纸.表示的一般原则.用计算机辅助设计(CAD)系统对直线的制备 |
(Technical drawings - General principles of presentation - Preparation of lines by CAD systems) |
BS EN ISO 12864-1998 |
眼科光学.接触镜片.散光测定 |
(Ophthalmic optics - Contact lenses - Determination of scattered light) |
BS EN ISO 12865-1998 |
眼科仪器.检眼镜 |
(Ophthalmic instruments - Retinoscopes) |
BS EN ISO 12866-1999 |
眼科设备.视野镜 |
(Ophthalmic instruments - Perimeters) |
BS EN ISO 12867-1998 |
眼科仪器.试验框架 |
(Ophthalmic instruments - Trial frames) |
BS EN ISO 12870-1998 |
眼科光学.镜框.一般要求和试验方法 |
(Ophthalmic optics - Spectacle frames - General requirements and test methods) |
BS EN ISO 12870-2004 |
眼科光学.镜框.要求和试验方法 |
|
BS EN ISO 12894-2001 |
热环境人类工效学.暴露于极热或冷环境中的个人的医学检验 |
(Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments) |
BS EN ISO 12922-1999 |
润滑油、工业油及有关产品(L级).H系列(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范 |
(Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU) |
BS EN ISO 12937-2001 |
石油及其产品的试验方法.BS 2000-438:石油产品.水含量测定.库仑卡耳费歇尔滴定法 |
(Methods of test for petroleum and its products - BS 2000-438:Petroleum products - Determination of content - Coulometric Karl Fischer titration method) |
BS EN ISO 12944-1-1998 |
涂料和清漆.防护涂层系统对钢结构的腐蚀防护.一般说明 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - General introduction) |
BS EN ISO 12944-2-1998 |
涂料和清漆.防护涂层系统对钢结构的腐蚀防护.环境的分类 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Classification of environments) |
BS EN ISO 12944-3-1998 |
涂料和清漆.防护涂层系统对钢结构的腐蚀防护.设计条件 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Design considerations) |
BS EN ISO 12944-4-1998 |
涂料和清漆.防护涂层系统对钢结构的腐蚀防护.表面类型和表面制备 |
(Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Types of surface and surface preparation) |